Nanopore Fabrication Made Easy: A Portable, Affordable Microcontroller-Assisted Approach for Tailored Pore Formation via Controlled Breakdown.

With growing interest in solid-state nanopore sensing─a single-molecule technique capable of profiling a host of analyte classes─establishing facile and scalable approaches for fabricating molecular-size pores is becoming increasingly important. The introduction of nanopore fabrication by controlled breakdown (CBD) has transformed the economics and accessibility of nanopore fabrication. Here, we introduce the design of an Arduino-based, portable USB-powered CBD device, with an estimated cost of <150 USD, which is ≈10-100× cheaper than most commercial solutions, capable of fabricating single nanopores conducive for single molecule sensing experiments. We demonstrate the facile fabrication of 60 tailored nanopores (∼2.6-12.6 nm) with ∼80% of the pores within 1 nm of the target diameter. Selected pores were then tested with double-stranded DNA, the canonical molecular ruler, demonstrating their performance for single-molecule sensing applications. The device is constructed with off-the-shelf readily available components and controlled using a highly customizable MATLAB application, which has capabilities encompassing pore fabrication, pore enlargement, and current-voltage acquisition for pore size estimation. When combined with a portable amplifier, this device also provides a fully portable sensing platform, an important step toward portable solid-state nanopore sensing applications.

Surface Functionalization and Texturing of Optical Metasurfaces for Sensing Applications.

Optical metasurfaces are planar metamaterials that can mediate highly precise light-matter interactions. Because of their unique optical properties, both plasmonic and dielectric metasurfaces have found common use in sensing applications, enabling label-free, nondestructive, and miniaturized sensors with ultralow limits of detection. However, because bare metasurfaces inherently lack target specificity, their applications have driven the development of surface modification techniques that provide selectivity. Both chemical functionalization and physical texturing methodologies can modify and enhance metasurface properties by selectively capturing analytes at the surface and altering the transduction of light-matter interactions into optical signals. This review summarizes recent advances in material-specific surface functionalization and texturing as applied to representative optical metasurfaces. We also present an overview of the underlying chemistry driving functionalization and texturing processes, including detailed directions for their broad implementation. Overall, this review provides a concise and centralized guide for the modification of metasurfaces with a focus toward sensing applications.

From Plastic Waste to Green Hydrogen and Valuable Chemicals Using Sunlight and Water.

Over 79 % of 6.3 billion tonnes of plastics produced from 1950 to 2015 have been disposed in landfills or found their way to the oceans, where they will reside for up to hundreds of years before being decomposed bringing upon significant dangers to our health and ecosystems. Plastic photoreforming offers an appealing alternative by using solar energy and water to transform plastic waste into value-added chemical commodities, while simultaneously producing green hydrogen via the hydrogen evolution reaction. This review aims to provide an overview of the underlying principles of emerging plastic photoreforming technologies, highlight the challenges associated with experimental protocols and performance assessments, discuss recent global breakthroughs on the photoreforming of plastics, and propose perspectives for future research. A critical assessment of current plastic photoreforming studies shows a lack of standardised conditions, hindering comparison amongst photocatalyst performance. Guidelines to establish a more accurate evaluation of materials and systems are proposed, with the aim to facilitate the translation of promising fundamental discovery in photocatalysts design.

Optimal Coatings of Co3 O4 Anodes for Acidic Water Electrooxidation.

Implementation of proton-exchange membrane water electrolyzers for large-scale sustainable hydrogen production requires the replacement of scarce noble-metal anode electrocatalysts with low-cost alternatives. However, such earth-abundant materials often exhibit inadequate stability and/or catalytic activity at low pH, especially at high rates of the anodic oxygen evolution reaction (OER). Here, the authors explore the influence of a dielectric nanoscale-thin oxide layer, namely Al2 O3 , SiO2 , TiO2 , SnO2 , and HfO2 , prepared by atomic layer deposition, on the stability and catalytic activity of low-cost and active but insufficiently stable Co3 O4 anodes. It is demonstrated that the ALD layers improve both the stability and activity of Co3 O4 following the order of HfO2 > SnO2 > TiO2 > Al2 O3 , SiO2 . An optimal HfO2 layer thickness of 12 nm enhances the Co3 O4 anode durability by more than threefold, achieving over 42 h of continuous electrolysis at 10 mA cm-2 in 1 m H2 SO4 electrolyte. Density functional theory is used to investigate the superior performance of HfO2 , revealing a major role of the HfO2 |Co3 O4 interlayer forces in the stabilization mechanism. These insights offer a potential strategy to engineer earth-abundant materials for low-pH OER catalysts with improved performance from earth-abundant materials for efficient hydrogen production.

Understanding the Role of (W, Mo, Sb) Dopants in the Catalyst Evolution and Activity Enhancement of Co3 O4 during Water Electrolysis via In Situ Spectroelectrochemical Techniques.

Unlocking the potential of the hydrogen economy is dependent on achieving green hydrogen (H2 ) production at competitive costs. Engineering highly active and durable catalysts for both oxygen and hydrogen evolution reactions (OER and HER) from earth-abundant elements is key to decreasing costs of electrolysis, a carbon-free route for H2 production. Here, a scalable strategy to prepare doped cobalt oxide (Co3 O4 ) electrocatalysts with ultralow loading, disclosing the role of tungsten (W), molybdenum (Mo), and antimony (Sb) dopants in enhancing OER/HER activity in alkaline conditions, is reported. In situ Raman and X-ray absorption spectroscopies, and electrochemical measurements demonstrate that the dopants do not alter the reaction mechanisms but increase the bulk conductivity and density of redox active sites. As a result, the W-doped Co3 O4 electrode requires ≈390 and ≈560 mV overpotentials to reach ±10 and ±100 mA cm-2 for OER and HER, respectively, over long-term electrolysis. Furthermore, optimal Mo-doping leads to the highest OER and HER activities of 8524 and 634 A g-1 at overpotentials of 0.67 and 0.45 V, respectively. These novel insights provide directions for the effective engineering of Co3 O4 as a low-cost material for green hydrogen electrocatalysis at large scales.

Direct Observation of Oxygen Evolution and Surface Restructuring on Mn2O3 Nanocatalysts Using In Situ and Ex Situ Transmission Electron Microscopy.

Direct observation of oxygen evolution reaction (OER) on catalyst surface may significantly advance the mechanistic understanding of OER catalysis. Here, we report the first real-time nanoscale observation of chemical OER on Mn2O3 nanocatalyst surface using an in situ liquid holder in a transmission electron microscope (TEM). The oxygen evolution process can be directly visualized from the development of oxygen nanobubbles around nanocatalysts. The high spatial and temporal resolution further enables us to unravel the real-time formation of a surface layer on Mn2O3, whose thickness oscillation reflects a partially reversible surface restructuring relevant to OER catalysis. Ex situ atomic-resolution TEM on the residual surface layer after OER reveals its amorphous nature with reduced Mn valence and oxygen coordination. Besides shedding light on the dynamic OER catalysis, our results also demonstrate a powerful strategy combining in situ and ex situ TEM for investigating various chemical reaction mechanisms in liquid.

The Effect of Surface Entropy on the Heat of Non-Wetting Liquid Intrusion into Nanopores.

On-demand access to renewable and environmentally friendly energy sources is critical to address current and future energy needs. To achieve this, the development of new mechanisms of efficient thermal energy storage (TES) is important to improve the overall energy storage capacity. Demonstrated here is the ideal concept that the thermal effect of developing a solid-liquid interface between a non-wetting liquid and hydrophobic nanoporous material can store heat to supplement current TES technologies. The fundamental macroscopic property of a liquid's surface entropy and its relationship to its solid surface are one of the keys to predict the magnitude of the thermal effect by the development of the liquid-solid interface in a nanoscale environment-driven through applied pressure. Demonstrated here is this correlation of these properties with the direct measurement of the thermal effect of non-wetting liquids intruding into hydrophobic nanoporous materials. It is shown that the model can resonably predict the heat of intrusion into rigid mesoporous silica and some microporous zeolite when the temperature dependence of the contact angle is applied. Conversely, intrusion into flexible microporous metal-organic frameworks requires further improvement. The reported results with further development have the potential to lead to the development of a new supplementary method and mechanim for TES.

An Outlook of Recent Advances in Chemiresistive Sensor-Based Electronic Nose Systems for Food Quality and Environmental Monitoring.

An electronic nose (Enose) relies on the use of an array of partially selective chemical gas sensors for identification of various chemical compounds, including volatile organic compounds in gas mixtures. They have been proposed as a portable low-cost technology to analyse complex odours in the food industry and for environmental monitoring. Recent advances in nanofabrication, sensor and microcircuitry design, neural networks, and system integration have considerably improved the efficacy of Enose devices. Here, we highlight different types of semiconducting metal oxides as well as their sensing mechanism and integration into Enose systems, including different pattern recognition techniques employed for data analysis. We offer a critical perspective of state-of-the-art commercial and custom-made Enoses, identifying current challenges for the broader uptake and use of Enose systems in a variety of applications.

Non-Periodic Epsilon-Near-Zero Metamaterials at Visible Wavelengths for Efficient Non-Resonant Optical Sensing.

Epsilon-near-zero (ENZ) materials offer unique properties for applications including optical clocking, nonlinear optics, and telecommunication. To date, the fabrication of ENZ materials at visible wavelengths relies mostly on the use of periodic structures, providing some manufacturing and material challenges. Here, we present the engineering of nonperiodic sodium tungsten bronzes (NaxWO3) metamaterials featuring ENZ properties in the visible spectrum. We showcase their use as efficient optical sensors, demonstrating a nonresonant sensing mechanism based on refractive index matching. Our optimized ENZ metamaterials display an unconventional blue-shift of the transmittance maximum to increasing refractive index of the surrounding environment, achieving sensitivity as high as 150 nm/RIU. Our theoretical and experimental investigations provide first insights on this sensing mechanism, establishing guidelines for the future engineering and implementation of efficient ENZ sensors. The unique optoelectronic properties demonstrated by this class of tunable NaxWO3 materials bear potential for various applications ranging from light-harvesting to optical photodetectors.

Stable Acidic Water Oxidation with a Cobalt-Iron-Lead Oxide Catalyst Operating via a Cobalt-Selective Self-Healing Mechanism.

The instability and expense of anodes for water electrolyzers with acidic electrolytes can be overcome through the implementation of a cobalt-iron-lead oxide electrocatalyst, [Co-Fe-Pb]Ox , that is self-healing in the presence of dissolved metal precursors. However, the latter requirement is pernicious for the membrane and especially the cathode half-reaction since Pb2+ and Fe3+ precursors poison the state-of-the-art platinum H2 evolving catalyst. To address this, we demonstrate the invariably stable operation of [Co-Fe-Pb]Ox in acidic solutions through a cobalt-selective self-healing mechanism without the addition of Pb2+ and Fe3+ and investigate the kinetics of the process. Soft X-ray absorption spectroscopy reveals that low concentrations of Co2+ in the solution stabilize the catalytically active Co(Fe) sites. The highly promising performance of this system is showcased by steady water electrooxidation at 80±1 °C and 10 mA cm-2 , using a flat electrode, at an overpotential of 0.56±0.01 V on a one-week timescale.

'It struck at the heart of who I thought I was': A meta-synthesis of the qualitative literature examining the experiences of people with multiple sclerosis.

BACKGROUND: People with multiple sclerosis (MS) have varied experiences and approaches to self-management. This review aimed to explore the experiences of people with MS, and consider the implications of these experiences for clinical practice and research. METHODS: A meta-synthesis of the qualitative literature examining experiences of people with MS was conducted using systematic searches of ProQuest, PubMed, CINAHL and PsycINFO. We incorporated feedback from team members with MS as expert patient knowledge-users to capture the complex subjectivities of persons with lived experience responding to research on lived experience of the same disease. RESULTS: Of 1680 unique articles, 77 met the inclusion criteria. We identified five experiential themes: (a) the quest for knowledge, expertise and understanding, (b) uncertain trajectories (c) loss of valued roles and activities, and the threat of a changing identity, (d) managing fatigue and its impacts on life and relationships, and (f) adapting to life with MS. These themes were distributed across three domains related to disease (symptoms; diagnosis; progression and relapse) and two contexts (the health-care sector; and work, social and family life). CONCLUSION: The majority of people in the studies included in this review expressed a determination to adapt to MS, indicating a strong motivation for people with MS and clinicians to collaborate in the quest for knowledge. Clinicians caring for people with MS need to consider the experiential and social outcomes of this disease such as fatigue and the preservation of valued social roles, and incorporate this into case management and clinical planning.

Metal-Organic Frameworks/Conducting Polymer Hydrogel Integrated Three-Dimensional Free-Standing Monoliths as Ultrahigh Loading Li-S Battery Electrodes.

The lithium-sulfur (Li-S) system is a promising material for the next-generation of high energy density batteries with application extending from electrical vehicles to portable devices and aeronautics. Despite progress, the energy density of current Li-S technologies is still below that of conventional intercalation-type cathode materials due to limited stability and utilization efficiency at high sulfur loading. Here, we present a conducting polymer hydrogel integrated highly performing free-standing three-dimensional (3D) monolithic electrode architecture for Li-S batteries with superior electrochemical stability and energy density. The electrode layout consists of a highly conductive three-dimensional network of N,P codoped carbon with well-dispersed metal-organic framework nanodomains of ZIF-67 and HKUST-1. The hierarchical monolithic 3D carbon networks provide an excellent environment for charge and electrolyte transport as well as mechanical and chemical stability. The electrically integrated MOF nanodomains significantly enhance the sulfur loading and retention capabilities by inhibiting the release of lithium polysulfide specificities as well as improving the charge transfer efficiency at the electrolyte interface. Our optimal 3D carbon-HKUST-1 electrode architecture achieves a very high areal capacity of >16 mAh cm-2 and volumetric capacity (CV) of 1230.8 mAh cm-3 with capacity retention of 82% at 0.2C for over 300 cycles, providing an attractive candidate material for future high-energy density Li-S batteries.

Light-activated inorganic CsPbBr2I perovskite for room-temperature self-powered chemical sensing.

Halide perovskite materials are excellent light harvesters that have generated enormous interest for photovoltaic technology and an increasing number of other optoelectronic applications. Very recently, their use for miniaturized chemical sensors has shown a promising room-temperature response. Here, we present some insights on the use of CsPbBr2I (CPBI) perovskites for self-powered room-temperature sensing of several environmentally and medically relevant compounds demonstrating rapid detection of down to concentrations of 1 ppm. Notably, the photocurrent of these self-powered CPBI-based devices increases under exposure to both reducing (e.g. acetone, propane) and oxidizing (e.g. NO2, O2) gas molecules and decreases rapidly upon reverting to an inert atmosphere. In situ photoluminescence (PL) analysis of the CPBI during exposure to oxidizing molecules reveals a strongly increased PL intensity and longer lifetime indicating a prevalent role of CPBI trap states in the sensing mechanism. These findings provide new insights for the engineering of perovskite-based materials for their future chemical sensing applications.

Near-Infrared Active Lead Chalcogenide Quantum Dots: Preparation, Post-Synthesis Ligand Exchange, and Applications in Solar Cells.

Quantum dots (QDs) of lead chalcogenides (e.g. PbS, PbSe, and PbTe) are attractive near-infrared (NIR) active materials that show great potential in a wide range of applications, such as, photovoltaics (PV), optoelectronics, sensors, and bio-electronics. The surface ligand plays an essential role in the production of QDs, post-synthesis modification, and their integration to practical applications. Therefore, it is critically important that the influence of surface ligands on the synthesis and properties of QDs is well understood for their applications in various devices. In this Review we elaborate the application of colloidal synthesis techniques for the preparation of lead chalcogenide based QDs. We specifically focus on the influence of surface ligands on the synthesis of QDs and their solution-phase ligand exchange. Given the importance of lead chalcogenide QDs as potential light harvesters, we also pay particular attention to the current progress of these QDs in photovoltaic applications.

Photoactivity and Stability Co-Enhancement: When Localized Plasmons Meet Oxygen Vacancies in MgO.

Durability is still one of the key obstacles for the further development of photocatalytic energy-conversion systems, especially low-dimensional ones. Encouragingly, recent studies show that nanoinsulators such as SiO2 and MgO exhibit substantially enhanced photocatalytic durability than the typical semiconductor p25 TiO2 . Extending this knowledge, MgO-Au plasmonic defect nanosystems are developed that combine the stable photoactivity from MgO surface defects with energy-focusing plasmonics from Au nanoparticles (NPs), where Au NPs are anchored onto monodispersed MgO nanotemplates. Theoretical calculations reveal that the midgap defect (MGD) states in MgO are generated by oxygen vacancies, which provide the main avenues for upward electron transitions under photoexcitation. These electrons drive stable proton photoreduction to H2 gas via water splitting. A synergistic interaction between Au's localized plasmons and MgO's oxygen vacancies is observed here, which enhances MgO's photoactivity and stability simultaneously. Such co-enhancement is attributed to the stable longitudinal-plasmon-free Au NPs, which provide robust hot electrons capable of overcoming the interband transition barrier (≈1.8 eV) to reach proton reduction potential for H2 generation. The demonstrated plasmonic defect nanosystems are expected to open a new avenue for developing highly endurable photoredox systems for the integration of multifunctionalities in energy conversion, environmental decontamination, and climate change mitigation.

Superior Self-Powered Room-Temperature Chemical Sensing with Light-Activated Inorganic Halides Perovskites.

Hybrid halide perovskite is one of the promising light absorber and is intensively investigated for many optoelectronic applications. Here, the first prototype of a self-powered inorganic halides perovskite for chemical gas sensing at room temperature under visible-light irradiation is presented. These devices consist of porous network of CsPbBr3 (CPB) and can generate an open-circuit voltage of 0.87 V under visible-light irradiation, which can be used to detect various concentrations of O2 and parts per million concentrations of medically relevant volatile organic compounds such as acetone and ethanol with very quick response and recovery time. It is observed that O2 gas can passivate the surface trap sites in CPB and the ambipolar charge transport in the perovskite layer results in a distinct sensing mechanism compared with established semiconductors with symmetric electrical response to both oxidizing and reducing gases. The platform of CPB-based gas sensor provides new insights for the emerging area of wearable sensors for personalized and preventive medicine.

Miniaturized Bio-and Chemical-Sensors for Point-of-Care Monitoring of Chronic Kidney Diseases.

This review reports the latest achievements in point-of-care (POC) sensor technologies for the monitoring of ammonia, creatinine and urea in patients suffering of chronic kidney diseases (CKDs). Abnormal levels of these nitrogen biomarkers are found in the physiological fluids, such as blood, urine and sweat, of CKD patients. Delocalized at-home monitoring of CKD biomarkers via integration of miniaturized, portable, and low cost chemical- and bio-sensors in POC devices, is an emerging approach to improve patients' health monitoring and life quality. The successful monitoring of CKD biomarkers, performed on the different body fluids by means of sensors having strict requirements in term of size, cost, large-scale production capacity, response time and simple operation procedures for use in POC devices, is reported and discussed.

Superamphiphobic Bionic Proboscis for Contamination-Free Manipulation of Nano and Core-Shell Droplets.

Manipulation of nanoliter droplets is a key step for many emerging technologies including ultracompact microfluidics devices, 3D and flexible electronic printing. Despite progress, contamination-free generation and release of nanoliter droplets by compact low-cost devices remains elusive. In the present study, inspired by butterflies' minute manipulation of fluids, the authors have engineered a superamphiphobic bionic proboscis (SAP) layout that surpasses synthetic and natural designs. The authors demonstrate the scalable fabrication of SAPs with tunable inner diameters down to 50 µm by the rapid gas-phase nanotexturing of the outer and inner surfaces of readily available hypodermic needles. Optimized SAPs achieve contamination-free manipulation of water and oil droplets down to a liquid surface tension of 26.56 mN m-1 and a volume of 10 nL. The unique potential of this layout is showcased by the rapid and carefully controlled in-air synthesis of core-shell droplets with well-controlled compositions. These findings provide a new low-cost tool for high-precision manipulation of nanoliter droplets, offering a powerful alternative to established thermal- and electrodynamic-based devices.

Flame-made ultra-porous TiO2 layers for perovskite solar cells.

We report methyl ammonium lead iodide (MAPbI3) solar cells with an ultra-porous TiO2 electron transport layer fabricated using sequential flame aerosol and atomic layer depositions of porous and compact TiO2 layers. Flame aerosol pyrolysis allows rapid deposition of nanostructured and ultra-porous TiO2 layers that could be easily scaled-up for high-throughput low-cost industrial solar cell production. An efficiency of 13.7% was achieved with a flame-made nanostructured and ultra-porous TiO2 electrode that was coated with a compact 2 nm TiO2 layer. This demonstrates that MAPbI3 solar cells with a flame-made porous TiO2 layer can have a comparable efficiency to that of the control MAPbI3 solar cell with the well-established spin-coated porous TiO2 layer. The combination of flame aerosol and atomic layer deposition provides precise control of the TiO2 porosity. Notably, the porosity of the as-deposited flame-made TiO2 layers was 97% which was then fine-tuned down to 87%, 56% and 35% by varying the thickness of the subsequent compact TiO2 coating step. The effects of the decrease in porosity on the device performance are discussed. It is also shown that MAPbI3 easily infiltrates into the flame-made porous TiO2 nanostructure thanks to their high porosity and large pore size.

Advances in flame synthesis of nano-scale architectures for chemical, biomolecular, plasmonic, and light sensing.

Flame spray pyrolysis (FSP), a key technique under the broader category of flame aerosol synthesis, is being increasingly explored for the design of advanced miniaturized sensor architectures with applications including chemical, biomolecular, plasmonic, and light sensing. This review provides an overview of the advantages of FSP for the fabrication of nanostructured materials for sensing, delving into synthesis strategies and material structures that meet the increasing demands for miniaturized sensor devices. We focus on the fundamentals of FSP, discussing reactor configurations and how process parameters such as precursor compositions, flow rates, and temperature influence nanoparticle characteristics and their sensing performance. A detailed analysis of nanostructures, compositions, and morphologies made by FSP and their applications in chemical, chemiresistive, plasmonic, biosensing, and light sensing is presented. This review identifies the challenges and opportunities of FSP, exploring current limitations and potential improvements for industrial translation. We conclude by highlighting future research directions aiming to establish guidelines for the flame-based design of nano-scale sensing architectures.