RESUMO
OBJECTIVE: To report the learning curve of multiple operators for fusion magnetic resonance imaging (MRI) targeted biopsy and to determine the number of cases needed to achieve proficiency. MATERIALS AND METHODS: All adult males who underwent fusion MRI targeted biopsy between February 2012 and July 2021 for clinically suspected prostate cancer (PCa) in a single centre were included. Fusion transrectal MRI targeted biopsy was performed under local anaesthesia using the Koelis platform. Learning curves for segmentation of transrectal ultrasonography (TRUS) images and the overall MRI targeted biopsy procedure were estimated with locally weighted scatterplot smoothing by computing each operator's timestamps for consecutive procedures. Non-risk-adjusted cumulative sum (CUSUM) methods were used to create learning curves for clinically significant (i.e., International Society of Urological Pathology grade ≥ 2) PCa detection. RESULTS: Overall, 1721 patients underwent MRI targeted biopsy in our centre during the study period. The median (interquartile range) times for TRUS segmentation and for the MRI targeted biopsy procedure were 4.5 (3.5, 6.0) min and 13.2 (10.6, 16.9) min, respectively. Among the 14 operators with experience of more than 50 cases, a plateau was reached after 40 cases for TRUS segmentation time and 50 cases for overall MRI targeted biopsy procedure time. CUSUM analysis showed that the learning curve for clinically significant PCa detection required 25 to 45 procedures to achieve clinical proficiency. Pain scores ranged between 0 and 1 for 84% of patients, and a plateau phase was reached after 20 to 100 cases. CONCLUSIONS: A minimum of 50 cases of MRI targeted biopsy are necessary to achieve clinical and technical proficiency and to reach reproducibility in terms of timing, clinically significant PCa detection, and pain.
Assuntos
Biópsia Guiada por Imagem , Curva de Aprendizado , Próstata , Neoplasias da Próstata , Humanos , Masculino , Neoplasias da Próstata/patologia , Neoplasias da Próstata/diagnóstico por imagem , Biópsia Guiada por Imagem/métodos , Idoso , Pessoa de Meia-Idade , Próstata/patologia , Próstata/diagnóstico por imagem , Ultrassonografia de Intervenção/métodos , Imageamento Tridimensional , Imageamento por Ressonância Magnética , Imagem por Ressonância Magnética Intervencionista , Competência Clínica , Estudos RetrospectivosRESUMO
INTRODUCTION: Simulation-based training has proven to be a promising option allowing for initial and continuous training while limiting the impact of the learning curve on the patient. The Biopsym simulator was developed as a complete teaching environment for the prostate biopsy procedure. This paper presents the results of an external validation of this simulator, involving urology residents recruited during a regional teaching seminar. METHODS: Residents from 4 academic urology departments of the French Auvergne Rhône-Alpes region, who did not take part in the previous simulator validation studies, were enrolled. After a short presentation and standardized initiation session, residents carried out a simulated systematic 12-core biopsy procedure and were asked to fill in a questionnaire collecting their expectations and evaluation of the Biopsym simulator. The number of biopsies reaching each targeted sector, the total score provided by the simulator and the duration of the procedure were recorded. RESULTS: Twenty-three residents were recruited. The overall added value (/100) for learning was rated at a median of 100 (interquartile range 83-100), overall realism of the biopsy procedure at 80 (65-89). The median percentage of biopsies reaching the targeted sector was 66.7% (62-75). The median score provided by the simulator was 50% (37-60). For both, the difference between residents with or without prior biopsy experience was not statistically significant. The median duration of the simulated biopsy procedure was 4:58 (minutes: seconds) (3:49-6:00). Resident with prior experience required less time to complete the biopsy procedure 3:53 (3:39-4:56) vs. 5:10 (4:59-7:10), P=0.01. CONCLUSION: This external validation study confirms a high acceptance of the simulator by the target audience. To our knowledge, the Biopsym simulator is the only prostate biopsy simulator that demonstrated such validity as evaluated by clinicians, outside the center involved in its early development. LEVEL OF EVIDENCE: 3.
Assuntos
Próstata , Treinamento por Simulação , Biópsia , Competência Clínica , Simulação por Computador , Humanos , Curva de Aprendizado , MasculinoRESUMO
Medical robotics is poised to transform all aspects of medicine-from surgical intervention to targeted therapy, rehabilitation, and hospital automation. A key area is the development of robots for minimally invasive interventions. This review provides a detailed analysis of the evolution of interventional robots and discusses how the integration of imaging, sensing, and robotics can influence the patient care pathway toward precision intervention and patient-specific treatment. It outlines how closer coupling of perception, decision, and action can lead to enhanced dexterity, greater precision, and reduced invasiveness. It provides a critical analysis of some of the key interventional robot platforms developed over the years and their relative merit and intrinsic limitations. The review also presents a future outlook for robotic interventions and emerging trends in making them easier to use, lightweight, ergonomic, and intelligent, and thus smarter, safer, and more accessible for clinical use.
Assuntos
Engenharia Biomédica/tendências , Robótica/tendências , Pesquisa Translacional Biomédica/tendências , Engenharia Biomédica/métodos , Sistemas de Liberação de Medicamentos , Economia Médica , Desenho de Equipamento , Humanos , Laparoscopia/tendências , Procedimentos Cirúrgicos Minimamente Invasivos/tendências , Neurocirurgia/tendências , Ortopedia/tendências , Procedimentos Cirúrgicos Robóticos/tendências , Pesquisa Translacional Biomédica/métodosRESUMO
Objectives: The Biopsym simulator, a virtual-reality simulator for prostate biopsies, was designed to offer enhanced teaching of the biopsy procedure. The objectives of the present article are to describe the new version of the simulator and report the results of a new validation study.Material and methods: A prospective validation study was conducted between January and March 2017. The new version of the simulator, with improved physical realism, ultrasound image deformation, and a new scoring system, was evaluated by novice and confirmed users.Results: Twenty-one users evaluated the simulator, including ten novices and 11 confirmed users. The overall realism of the biopsy procedure was rated at 7.7/10 (IQR 5.7-9). The differences between the rates given by confirmed users and novices were not statistically significant. The median overall score obtained for the performance of 12 systematic ultrasound-guided biopsies was 43% (IQR 33-55). The median score obtained by confirmed users was 54% (IQR 46-62), and the median score obtained by novices was 31% (IQR 20-35). The difference between the scores was statistically significant (p = 0.005).Conclusions: This study allowed us to gather evidence towards the validation, and particularly towards the construct validation of the new version of the Biopsym simulator.
Assuntos
Próstata , Treinamento por Simulação , Biópsia , Competência Clínica , Simulação por Computador , Masculino , Estudos Prospectivos , Interface Usuário-ComputadorRESUMO
OBJECTIVE: The accuracy of biopsy targeting is a major issue for prostate cancer diagnosis and therapy. However, navigation to biopsy targets remains challenging due to the limitations of transrectal ultrasound (TRUS) guidance added to prostate motion issues. This article describes a rigid 2D/3D deep registration method, which provides a continuous tracking of the biopsy location w.r.t the prostate for enhanced navigation. METHODS: A spatiotemporal registration network (SpT-Net) is proposed to localize the live 2D US image relatively to a previously aquired US reference volume. The temporal context relies on prior trajectory information based on previous registration results and probe tracking. Different forms of spatial context were compared through inputs (local, partial or global) or using an additional spatial penalty term. The proposed 3D CNN architecture with all combinations of spatial and temporal context was evaluated in an ablation study. For providing a realistic clinical validation, a cumulative error was computed through series of registrations along trajectories, simulating a complete clinical navigation procedure. We also proposed two dataset generation processes with increasing levels of registration complexity and clinical realism. RESULTS: The experiments show that a model using local spatial information combined with temporal information performs better than more complex spatiotemporal combination. CONCLUSION: The best proposed model demonstrates robust real-time 2D/3D US cumulated registration performance on trajectories. Those results respect clinical requirements, application feasibility, and they outperform similar state-of-the-art methods. SIGNIFICANCE: Our approach seems promising for clinical prostate biopsy navigation assistance or other US image-guided procedure.
Assuntos
Próstata , Neoplasias da Próstata , Masculino , Humanos , Próstata/diagnóstico por imagem , Próstata/patologia , Imageamento Tridimensional/métodos , Biópsia , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/patologia , Ultrassonografia/métodosRESUMO
BACKGROUND: Segmentation of three-dimensional (3D) transrectal ultrasound (TRUS) images is known to be challenging, and the clinician often lacks a reliable and easy-to-use indicator to assess its accuracy during the fusion magnetic resonance imaging (MRI)-targeted prostate biopsy procedure. OBJECTIVE: To assess the effect of the relative volume difference between 3D-TRUS and MRI segmentation on the outcome of a targeted biopsy. DESIGN, SETTING, AND PARTICIPANTS: All adult males who underwent an MRI-targeted prostate biopsy for clinically suspected prostate cancer between February 2012 and July 2021 were consecutively included. INTERVENTION: All patients underwent a fusion MRI-targeted prostate biopsy with a Koelis device. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: Three-dimensional TRUS and MRI prostate volumes were calculated using 3D prostate models issued from the segmentations. The primary outcome was the relative segmentation volume difference (SVD) between transrectal ultrasound and MRI divided by the MRI volume (SVD = MRI volume - TRUS volume/MRI volume) and its correlation with clinically significant prostate cancer (eg, International Society of Urological Pathology [ISUP] ≥2) positiveness on targeted biopsy cores. RESULTS AND LIMITATIONS: Overall, 1721 patients underwent a targeted biopsy resulting in a total of 5593 targeted cores. The median relative SVD was significantly lower in patients diagnosed with clinically significant prostate cancer than in those with ISUP 0-1: (6.7% [interquartile range {IQR} -2.7, 13.6] vs 8.0% [IQR 3.3, 16.4], p < 0.01). A multivariate regression analysis showed that a relative SVD of >10% of the MRI volume was associated with a lower detection rate of clinically significant prostate cancer (odds ratio = 0.74 [95% confidence interval: 0.55-0.98]; p = 0.038). CONCLUSIONS: A relative SVD of >10% of the MRI segmented volume was associated with a lower detection rate of clinically significant prostate cancer on targeted biopsy cores. The relative SVD can be used as a per-procedure quality indicator of 3D-TRUS segmentation. PATIENT SUMMARY: A discrepancy of ≥10% between segmented magnetic resonance imaging and transrectal ultrasound volume is associated with a reduced ability to detect significant prostate cancer on targeted biopsy cores.
RESUMO
PURPOSE: We report what is to our knowledge the initial experience with a new 3-dimensional ultrasound robotic system for prostate brachytherapy assistance, focal therapy and prostate biopsies. Its ability to track prostate motion intraoperatively allows it to manage motions and guide needles to predefined targets. MATERIALS AND METHODS: A robotic system was created for transrectal ultrasound guided needle implantation combined with intraoperative prostate tracking. Experiments were done on 90 targets embedded in a total of 9 mobile, deformable, synthetic prostate phantoms. Experiments involved trying to insert glass beads as close as possible to targets in multimodal anthropomorphic imaging phantoms. Results were measured by segmenting the inserted beads in computerized tomography volumes of the phantoms. RESULTS: The robot reached the chosen targets in phantoms with a median accuracy of 2.73 mm and a median prostate motion of 5.46 mm. Accuracy was better at the apex than at the base (2.28 vs 3.83 mm, p <0.001), and similar for horizontal and angled needle inclinations (2.7 vs 2.82 mm, p = 0.18). CONCLUSIONS: To our knowledge this robot for prostate focal therapy, brachytherapy and targeted prostate biopsies is the first system to use intraoperative prostate motion tracking to guide needles into the prostate. Preliminary experiments show its ability to reach targets despite prostate motion.
Assuntos
Braquiterapia/instrumentação , Braquiterapia/métodos , Agulhas , Próstata/patologia , Neoplasias da Próstata/patologia , Neoplasias da Próstata/radioterapia , Robótica/instrumentação , Biópsia , Desenho de Equipamento , Humanos , Masculino , Períneo , Imagens de Fantasmas , Próstata/diagnóstico por imagem , UltrassonografiaRESUMO
PURPOSE: Phantoms are a vital step for the preliminary validation of new image-guided procedures. In this paper, the authors present a deformable prostate phantom for use with multimodal imaging (end-fire or side-fire ultrasound, CT and MRI) and more specifically for transperineal or transrectal needle-insertion procedures. It is made of soft polyvinyl chloride (PVC) plastic and includes a prostate, a perineum, a rectum, a soft periprostatic surrounding and embedded targets for image registration and needle-targeting. Its main particularity is its realistic deformability upon manipulation. METHODS: After a detailed manufacturing description, the imaging and mechanical characteristics of the phantom are described and evaluated. First, the speed of sound and stress-strain relationship of the PVC material used in the phantom are described, followed by an analysis of its storage, imaging, needle-insertion force, and deformability characteristics. RESULTS: The average speed of sound in the phantom was measured to be 1380 ± 20 m/s, while the stress-strain relationship was found to be viscoelastic and in the range of typical prostatic tissues. The mechanical and imaging characteristics of the phantom were found to remain stable at cooler storage temperatures. The phantom had clearly distinguishable morphology in all three imaging modalities, with embedded targets that could be precisely segmented, resulting in an average US-CT rigid registration error of 0.66 mm. The mobility of the phantom prostate upon needle insertion was between 2 and 4 mm, with rotations between 0° and 2°, about the US probe head. CONCLUSION: The phantom's characteristics compare favorably with in vitro and in vivo measurements found in the literature. The authors believe that this realistic phantom could be of use to researchers studying new needle-based prostate diagnosis and therapy techniques.
Assuntos
Braquiterapia/instrumentação , Interpretação de Imagem Assistida por Computador/métodos , Agulhas , Imagens de Fantasmas , Neoplasias da Próstata/diagnóstico , Neoplasias da Próstata/radioterapia , Implantação de Prótese/instrumentação , Técnica de Subtração/instrumentação , Braquiterapia/métodos , Desenho Assistido por Computador , Módulo de Elasticidade , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , MasculinoRESUMO
PURPOSE: Prostate segmentation of 3D TRUS images is a prerequisite for several diagnostic and therapeutic applications. Unfortunately, this difficult task suffers from high intra and interobserver variability, even for experienced urologists/radiologists. This is why automatic segmentation algorithms could have a significant clinical added-value. METHODS: This paper introduces a new deep segmentation architecture consisting of two main phases: view-specific segmentations of 2D slices and their fusion. The segmentation phase is based on three segmentation networks trained in parallel on specific slice viewing directions: axial, coronal, and sagittal. The proposed fusion network is then fed with the output of the segmentation networks and trained to produce three confidence maps. These maps correspond to the local trust granted by the fusion network to each view-specific segmentation network. Finally, for a given slice, the segmentation is computed by combining these confidence maps with their corresponding segmentations. The 3D segmentation of the prostate is obtained by restacking all the segmented slices to form a volume. RESULTS: This approach was evaluated on a database of 100 patients with several combinations of network architectures (for both the segmentation phase and the fusion phase) to show the flexibility and reliability of the framework. The proposed approach was also compared to STAPLE, to the majority voting strategy, and to a direct 3D approach tested on the same database. The new method outperforms these three approaches on all evaluation criteria. Finally, the results of the multi-eXpert fusion (MXF) framework compare favorably with other state-of-the-art methods, while these methods typically work on smaller databases. CONCLUSIONS: We proposed a novel MXF framework to segment 3D TRUS images of the prostate. The main feature of this approach is the fusion of expert network results at the pixel level using computed confidence maps. Experiments conducted on a clinical database have shown the robustness and flexibility of this approach and its superiority over state-of-the-art approaches. Finally, the MXF framework demonstrated its ability to capture and preserve the underlying gland structures, particularly in the base and apex regions.
Assuntos
Imageamento Tridimensional , Próstata , Algoritmos , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Aprendizado de Máquina , Masculino , Próstata/diagnóstico por imagem , Reprodutibilidade dos TestesRESUMO
PURPOSE: Precise determination of target is an essential procedure in prostate interventions, such as prostate biopsy, lesion detection, and targeted therapy. However, the prostate delineation may be tough in some cases due to tissue ambiguity or lack of partial anatomical boundary. In this study, we propose a novel supervised registration-based algorithm for precise prostate segmentation, which combines the convolutional neural network (CNN) with a statistical shape model (SSM). METHODS: The proposed network mainly consists of two branches. One called SSM-Net branch was exploited to predict the shape transform matrix, shape control parameters, and shape fine-tuning vector, for the generation of the prostate boundary. Furthermore, according to the inferred boundary, a normalized distance map was calculated as the output of SSM-Net. Another branch named ResU-Net was employed to predict a probability label map from the input images at the same time. Integrating the output of these two branches, the optimal weighted sum of the distance map and the probability map was regarded as the prostate segmentation. RESULTS: Two public data sets PROMISE12 and NCI-ISBI 2013 were utilized to evaluate the performance of the proposed algorithm. The results demonstrated that the segmentation algorithm achieved the best performance with an SSM of 9500 nodes, which obtained a dice of 0.907 and an average surface distance of 1.85 mm. Compared with other methods, our algorithm delineates the prostate region more accurately and efficiently. In addition, we verified the impact of model elasticity augmentation and the fine-tuning item on the network segmentation capability. As a result, both factors have improved the delineation accuracy, with dice increased by 10% and 7%, respectively. CONCLUSIONS: Our segmentation method has the potential to be an effective and robust approach for prostate segmentation.
Assuntos
Imageamento Tridimensional , Próstata , Algoritmos , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética/métodos , Masculino , Modelos Estatísticos , Redes Neurais de Computação , Próstata/diagnóstico por imagemRESUMO
This paper describes a learning environment for image-guided prostate biopsies for cancer diagnosis; it is based on an ultrasound probe simulator virtually exploring real datasets obtained from patients. The aim is to make the training of young physicians easier and faster with a tool that combines lectures, biopsy simulations and recommended exercises to master this medical gesture. It is designed particularly to help improve the acquisition of the three-dimensional representation of the prostate required for practicing biopsy sequences. The simulator uses haptic feedback to compute the position of the virtual probe from three-dimensional (3D) ultrasound recorded data. This paper presents the current version of this learning environment.
Assuntos
Biópsia por Agulha/métodos , Instrução por Computador/métodos , Modelos Biológicos , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/patologia , Cirurgia Assistida por Computador/educação , Cirurgia Assistida por Computador/métodos , Simulação por Computador , Humanos , Masculino , Ensino/métodos , Ultrassonografia de Intervenção/métodos , Interface Usuário-ComputadorRESUMO
In this study, we investigated a method allowing the determination of the femur bone surface as well as its mechanical axis from some easy-to-identify bony landmarks. The reconstruction of the whole femur is therefore performed from these landmarks using a Statistical Shape Model (SSM). The aim of this research is therefore to assess the impact of the number, the position, and the accuracy of the landmarks for the reconstruction of the femur and the determination of its related mechanical axis, an important clinical parameter to consider for the lower limb analysis. Two statistical femur models were created from our in-house dataset and a publicly available dataset. Both were evaluated in terms of average point-to-point surface distance error and through the mechanical axis of the femur. Furthermore, the clinical impact of using landmarks on the skin in replacement of bony landmarks is investigated. The predicted proximal femurs from bony landmarks were more accurate compared to on-skin landmarks while both had less than 3.5∘ degrees mechanical axis angle deviation error. The results regarding the non-invasive determination of the mechanical axis are very encouraging and could open very interesting clinical perspectives for the analysis of the lower limb either for orthopedics or functional rehabilitation.
Assuntos
Fêmur , Procedimentos de Cirurgia Plástica , Osso e Ossos , Estudos de Viabilidade , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Imageamento Tridimensional , Modelos EstatísticosRESUMO
This paper presents a new solution for 3D steering of flexible needles guided by 3D B-mode ultrasound imaging. It aims to realize a robust steering, by accounting for uncertainties, noise and tissue heterogeneities, while limiting tissue-related disturbances. The proposed solution features interconnected state observer, automatic needle tip segmentation and path planning algorithms. Measurement quality, state uncertainties and tissue heterogeneity are considered for robust needle steering with helical paths of variable curvature. Fast replanning allows for adaptability to unexpected disturbances. An experimental validation has been done through 62 insertions of 24 Gauge bevel-tip nitinol needles in various tissue. Results are promising, characterized by mean targeting errors of less than 1 mm in homogeneous phantoms, 1.5 ± 0.9 mm in heterogeneous phantoms and 1.7 ± 0.8 mm in ex-vivo tissue. This new approach is a step towards a precise and robust patient-specific gesture.
Assuntos
Algoritmos , Agulhas , Humanos , Imagens de Fantasmas , Ultrassonografia , Ultrassonografia de IntervençãoRESUMO
PURPOSE: Performing a transrectal ultrasound (TRUS) prostate biopsy is at the heart of the current prostate cancer detection procedure. With today's two-dimensional (2D) live ultrasound (US) imaging equipment, this task remains complex due to the poor visibility of cancerous tissue on TRUS images and the limited anatomical context available in the 2D TRUS plane. This paper presents a rigid 2D/3DUS registration method for navigated prostate biopsy. This allows continuous localization of the biopsy trajectory during the procedure. METHODS: We proposed an organ-based approach to achieve real-time rigid registration without the need for any probe localization device. The registration method combines image similarity and geometric proximity of detected features. Additions to our previous work include a multi-level approach and the use of a rejection rate favouring the best matches. Their aim is to increase the accuracy and time performances. These modifications and their in-depth evaluation on real clinical cases and comparison to this previous work are described. We performed static and dynamic evaluations along biopsy trajectories on a very large amount of data acquired under uncontrolled routine conditions. The computed transforms are compared to a ground truth obtained either from corresponding manually detected fiducials or from an already evaluated registration method. RESULTS: All results show that the current method outperforms its previous version, both in terms of accuracy (the average error reported here is 12 to 17% smaller depending on the experiment) and processing time (from 20 to 60 times faster compared to the previous implementation). The dynamic registration experiment demonstrates that the method can be successfully used for continuous tracking of the biopsy location w.r.t the prostate at a rate that varies between 5 and 15 Hz. CONCLUSIONS: This work shows that on the fly 2D/3DUS registration can be performed very efficiently on biopsy trajectories. This allows us to plan further improvements in prostate navigation and a clinical transfer.
Assuntos
Imageamento Tridimensional , Neoplasias da Próstata , Biópsia , Humanos , Masculino , Neoplasias da Próstata/diagnóstico por imagem , UltrassonografiaRESUMO
PURPOSE: New radiation therapy protocols, in particular adaptive, focal or boost brachytherapy treatments, require determining precisely the position and orientation of the implanted radioactive seeds from real-time ultrasound (US) images. This is necessary to compare them to the planned one and to adjust automatically the dosimetric plan accordingly for next seeds implantations. The image modality, the small size of the seeds, and the artifacts they produce make it a very challenging problem. The objective of the presented work is to setup and to evaluate a robust and automatic method for seed localization in three-dimensional (3D) US images. METHODS: The presented method is based on a prelocalization of the needles through which the seeds are injected in the prostate. This prelocalization allows focusing the search on a region of interest (ROI) around the needle tip. Seeds localization starts by binarizing the ROI and removing false positives using, respectively, a Bayesian classifier and a support vector machine (SVM). This is followed by a registration stage using first an iterative closest point (ICP) for localizing the connected set of seeds (named strand) inserted through a needle, and secondly refining each seed position using sum of squared differences (SSD) as a similarity criterion. ICP registers a geometric model of the strand to the candidate voxels while SSD compares an appearance model of a single seed to a subset of the image. The method was evaluated both for 3D images of an Agar-agar phantom and a dataset of clinical 3D images. It was tested on stranded and on loose seeds. RESULTS: Results on phantom and clinical images were compared with a manual localization giving mean errors of 1.09 ± 0.61 mm on phantom image and 1.44 ± 0.45 mm on clinical images. On clinical images, the mean errors of individual seeds orientation was 4.33 ± 8 . 51 ∘ . CONCLUSIONS: The proposed algorithm for radioactive seed localization is robust, tested on different US images, accurate, giving small mean error values, and returns the five cylindrical seeds degrees of freedom.
Assuntos
Braquiterapia , Aprendizado de Máquina , Neoplasias da Próstata , Teorema de Bayes , Humanos , Masculino , Imagens de Fantasmas , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/radioterapiaRESUMO
PURPOSE: The authors present a fully automatic algorithm for the segmentation of the prostate in three-dimensional magnetic resonance (MR) images. METHODS: The approach requires the use of an anatomical atlas which is built by computing transformation fields mapping a set of manually segmented images to a common reference. These transformation fields are then applied to the manually segmented structures of the training set in order to get a probabilistic map on the atlas. The segmentation is then realized through a two stage procedure. In the first stage, the processed image is registered to the probabilistic atlas. Subsequently, a probabilistic segmentation is obtained by mapping the probabilistic map of the atlas to the patient's anatomy. In the second stage, a deformable surface evolves toward the prostate boundaries by merging information coming from the probabilistic segmentation, an image feature model and a statistical shape model. During the evolution of the surface, the probabilistic segmentation allows the introduction of a spatial constraint that prevents the deformable surface from leaking in an unlikely configuration. RESULTS: The proposed method is evaluated on 36 exams that were manually segmented by a single expert. A median Dice similarity coefficient of 0.86 and an average surface error of 2.41 mm are achieved. CONCLUSIONS: By merging prior knowledge, the presented method achieves a robust and completely automatic segmentation of the prostate in MR images. Results show that the use of a spatial constraint is useful to increase the robustness of the deformable model comparatively to a deformable surface that is only driven by an image appearance model.
Assuntos
Imageamento por Ressonância Magnética/métodos , Neoplasias da Próstata/patologia , Neoplasias da Próstata/terapia , Algoritmos , Diagnóstico por Imagem/métodos , Humanos , Processamento de Imagem Assistida por Computador/métodos , Masculino , Oncologia/métodos , Modelos Estatísticos , Reconhecimento Automatizado de Padrão , Probabilidade , Próstata/diagnóstico por imagem , Próstata/patologia , Radiografia , Software , Propriedades de SuperfícieRESUMO
OBJECTIVES: To evaluate the ability of students to reproduce the skills acquired on a prostate biopsy simulator in a real-life situation. DESIGN: A prospective randomized controlled study was conducted. Medical students with no experience of prostate biopsy were randomized between arm A « conventional training ¼ and arm B « simulator-enhanced training. ¼ The training was performed for both groups on the simulator. The students in arm B were provided with visual and numerical feedback. The transfer of skills was assessed by recording the position of the 12 biopsies performed by each student on an unembalmed human cadaver using a 3D ultrasound mapping device. SETTING: The study was conducted in an academic urology department and the cadaver experiments in the adjoining anatomy laboratory. RESULTS: Twenty-four students were included, and 22 completed the study. The median score obtained on the simulator at the end of the training was 57% (53-61) for arm A and 66% (59-71) for arm B. The median score obtained on the cadaver by students trained with the simulator was 75% (60-80), statistically superior to the score obtained by students trained conventionally of 45% (30-60), p < 0.0001. The median score obtained by all students when performing biopsies in a real-life situation was 63% (50-80) versus 60% (56-70) for their last training on the simulator. CONCLUSION: These results support the transfer of skills acquired on the simulator, and the superiority of a training curriculum integrating simulation, and performance feedback.
Assuntos
Próstata , Estudantes de Medicina , Biópsia , Competência Clínica , Simulação por Computador , Humanos , Masculino , Estudos ProspectivosRESUMO
PURPOSE OF REVIEW: Robot-assisted laparoscopic surgery in urology has gained immense popularity with the daVinci system, but a lot of research teams are working on new robots. The purpose of this study is to review current urologic robots and present future development directions. RECENT FINDINGS: Future systems are expected to advance in two directions: improvements of remote manipulation robots and developments of image-guided robots. SUMMARY: The final goal of robots is to allow safer and more homogeneous outcomes with less variability of surgeon performance, as well as new tools to perform tasks on the basis of medical transcutaneous imaging, in a less invasive way, at lower costs. It is expected that improvements for a remote system could be augmented in reality, with haptic feedback, size reduction, and development of new tools for natural orifice translumenal endoscopic surgery. The paradigm of image-guided robots is close to clinical availability and the most advanced robots are presented with end-user technical assessments. It is also notable that the potential of robots lies much further ahead than the accomplishments of the daVinci system. The integration of imaging with robotics holds a substantial promise, because this can accomplish tasks otherwise impossible. Image-guided robots have the potential to offer a paradigm shift.
Assuntos
Laparoscopia/tendências , Robótica/tendências , Procedimentos Cirúrgicos Urológicos/tendências , Humanos , Laparoscopia/métodos , Robótica/instrumentação , Cirurgia Assistida por Computador , Procedimentos Cirúrgicos Urológicos/instrumentaçãoRESUMO
The objective of this article was developing an automated tool for routine clinical practice to estimate urinary stone composition from CT images based on the density of all constituent voxels. A total of 118 stones for which the composition had been determined by infrared spectroscopy were placed in a helical CT scanner. A standard acquisition, low-dose and high-dose acquisitions were performed. All voxels constituting each stone were automatically selected. A dissimilarity index evaluating variations of density around each voxel was created in order to minimize partial volume effects: stone composition was established on the basis of voxel density of homogeneous zones. Stone composition was determined in 52% of cases. Sensitivities for each compound were: uric acid: 65%, struvite: 19%, cystine: 78%, carbapatite: 33.5%, calcium oxalate dihydrate: 57%, calcium oxalate monohydrate: 66.5%, brushite: 75%. Low-dose acquisition did not lower the performances (P < 0.05). This entirely automated approach eliminates manual intervention on the images by the radiologist while providing identical performances including for low-dose protocols.
Assuntos
Tomografia Computadorizada Espiral/métodos , Cálculos Urinários/química , Cálculos Urinários/diagnóstico por imagem , Oxalato de Cálcio/análise , Fosfatos de Cálcio/análise , Cistina/análise , Humanos , Sensibilidade e Especificidade , Ácido Úrico/análiseRESUMO
OBJECTIVE: Mapping of transrectal ultrasonographic (TRUS) prostate biopsies is of fundamental importance for either diagnostic purposes or the management and treatment of prostate cancer, but the localization of the cores seems inaccurate. Our objective was to evaluate the capacities of an operator to plan transrectal prostate biopsies under 2-dimensional TRUS guidance using a registration algorithm to represent the localization of biopsies in a reference 3-dimensional ultrasonographic volume. METHODS: Thirty-two patients underwent a series of 12 prostate biopsies under local anesthesia performed by 1 operator using a TRUS probe combined with specific third-party software to verify that the biopsies were indeed conducted within the planned targets. RESULTS: The operator reached 71% of the planned targets with substantial variability that depended on their localization (100% success rate for targets in the middle and right parasagittal parts versus 53% for targets in the left lateral base). Feedback from this system after each series of biopsies enabled the operator to significantly improve his dexterity over the course of time (first 16 patients: median score, 7 of 10 and cumulated median biopsy length in targets of 90 mm; last 16 patients, median score, 9 of 10 and a cumulated median length of 121 mm; P = .046). CONCLUSIONS: In addition to being a useful tool to improve the distribution of prostate biopsies, the potential of this system is above all the preparation of a detailed "map" of each patient showing biopsy zones without substantial changes in routine clinical practices.