A Soft Zwitterionic Hydrogel as Potential Coating on a Polyimide Surface to Reduce Foreign Body Reaction to Intraneural Electrodes.

Invasive intraneural electrodes can control advanced neural-interfaced prostheses in human amputees. Nevertheless, in chronic implants, the progressive formation of a fibrotic capsule can gradually isolate the electrode surface from the surrounding tissue leading to loss of functionality. This is due to a nonspecific inflammatory response called foreign-body reaction (FBR). The commonly used poly(ethylene glycol) (PEG)-based low-fouling coatings of implantable devices can be easily encapsulated and are susceptible to oxidative damage in long-term in vivo applications. Recently, sulfobetaine-based zwitterionic hydrogels have emerged as an important class of robust ultra-low fouling biomaterials, holding great potential to mitigate FBR. The aim of this proof-of-principle in vitro work was to assess whether the organic zwitterionic-poly(sulfobetaine methacrylate) [poly(SBMA)]-hydrogel could be a suitable coating for Polyimide (PI)-based intraneural electrodes to reduce FBR. We first synthesized and analyzed the hydrogel through a mechanical characterization (i.e., Young's modulus). Then, we demonstrated reduced adhesion and activation of fibrogenic and pro-inflammatory cells (i.e., human myofibroblasts and macrophages) on the hydrogel compared with PEG-coated and polystyrene surfaces using cell viability assays, confocal fluorescence microscopy and high-content analysis of oxidative stress production. Interestingly, we successfully coated PI surfaces with a thin film of the hydrogel through covalent bond and demonstrated its high hydrophilicity via water contact angle measurement. Importantly, we showed the long-term release of an anti-fibrotic drug (i.e., Everolimus) from the hydrogel. Because of the low stiffness, biocompatibility, high hydration and ultra-low fouling characteristics, our zwitterionic hydrogel could be envisioned as long-term diffusion-based delivery system for slow and controlled anti-inflammatory and anti-fibrotic drug release in vivo.

Quercetin and hydroxytyrosol as modulators of hepatic steatosis: A NAFLD-on-a-chip study.

Organs-on-chip (OoCs) are catching on as a promising and valuable alternative to animal models, in line with the 3Rs initiative. OoCs enable the creation of three-dimensional (3D) tissue microenvironments with physiological and pathological relevance at unparalleled precision and complexity, offering new opportunities to model human diseases and to test the potential therapeutic effect of drugs, while overcoming the limited predictive accuracy of conventional 2D culture systems. Here, we present a liver-on-a-chip model to investigate the effects of two naturally occurring polyphenols, namely quercetin and hydroxytyrosol, on nonalcoholic fatty liver disease (NAFLD) using a high-content analysis readout methodology. NAFLD is currently the most common form of chronic liver disease; however, its complex pathogenesis is still far from being elucidated, and no definitive treatment has been established so far. In our experiments, we observed that both polyphenols seem to restrain the progression of the free fatty acid-induced hepatocellular steatosis, showing a cytoprotective effect due to their antioxidant and lipid-lowering properties. In conclusion, the findings of the present work could guide novel strategies to contrast the onset and progression of NAFLD.

CytoMatrix for a reliable and simple characterization of lung cancer stem cells from malignant pleural effusions.

Cancer stem cells (CSCs) are a subpopulation with the properties of extensive self-renewal, capability to generate differentiated cancer cells and resistance to therapies. We have previously shown that malignant pleural effusions (MPEs) from patients with non-small-cell lung cancer (NSCLC) represent a valuable source of cancer cells that can be grown as three-dimensional (3D) spheroids enriched for stem-like features, which depend on the activation of the Yes-associated protein-transcriptional coactivator with PDZ-binding motif (YAP-TAZ)/Wnt-ßcatenin/stearoyl-CoA desaturase 1 (SCD1) axis. Here, we describe a novel support, called CytoMatrix, for the characterization of limited amounts of cancer cells isolated from MPEs of patients with NSCLC. Our results show that this synthetic matrix allows an easy and fast characterization of several epithelial cellular markers. The use of CytoMatrix to study CSCs subpopulation confirms that SCD1 protein expression is enhanced in 3D spheroids when compared with 2D adherent cell cultures. YAP/TAZ nuclear-cytoplasmic distribution analysed by CytoMatrix in 3D spheroids is highly heterogeneous and faithfully reproduces what is observed in tumour biopsies. Our results confirm and extend the robustness of our workflow for the isolation and phenotypic characterization of primary cancer cells derived from the lung MPEs and underscore the role of SCD1.

Morphological and Molecular Assessment in Thyroid Cytology Using Cell-Capturing Scaffolds.

The increased frequency of thyroid nodules is paralleled by the rise of thyroid cancer diagnosis. To define the nature of most thyroid nodules, fine needle aspiration (FNA) followed by cytological evaluation is considered the method of choice. About 20% of FNA biopsies on thyroid nodules, however, show indeterminate cytological features and may require diagnostic surgery. Several immunocytochemical and molecular markers have been proposed to improve classification of thyroid nodules, but these tests require adequate cell amount and cytological paraffin inclusion. Polymeric matrices were recently proposed for the collection of cells for diagnostic purposes. In this study, we evaluated the diagnostic use of a new matrix (CytoMatrix). Morphological, molecular and immunohistochemical investigations were carried out on 23 FNA samples included in CytoMatrix and compared with data obtained from the definitive histology of surgical samples. Our results showed that CytoMatrix is suitable to capture and preserve the cellularity of the samples harvested by FNA and that its paraffin sections mimic the morphology of those obtained from real histological tissue. Immunohistochemistry on CytoMatrix samples was consistent with the immunophenotypical profile of the corresponding histological surgical specimens. Mutational analysis of the BRAF (V600E) gene performed on CytoMatrix inclusions and paired surgical tissue matched in all but one cases while matrix immunohistochemistry identified 91.6% of BRAF mutated samples. In conclusion, we suggest that CytoMatrix could be a reliable tool to overcome the current limits of traditional collection methods for the study of thyroid cytology, thereby improving their reliability for a conclusive diagnostic interpretation.

Combination of biochemical and mechanical cues for tendon tissue engineering.

Tendinopathies negatively affect the life quality of millions of people in occupational and athletic settings, as well as the general population. Tendon healing is a slow process, often with insufficient results to restore complete endurance and functionality of the tissue. Tissue engineering, using tendon progenitors, artificial matrices and bioreactors for mechanical stimulation, could be an important approach for treating rips, fraying and tissue rupture. In our work, C3H10T1/2 murine fibroblast cell line was exposed to a combination of stimuli: a biochemical stimulus provided by Transforming Growth Factor Beta (TGF-ß) and Ascorbic Acid (AA); a three-dimensional environment represented by PEGylated-Fibrinogen (PEG-Fibrinogen) biomimetic matrix; and a mechanical induction exploiting a custom bioreactor applying uniaxial stretching. In vitro analyses by immunofluorescence and mechanical testing revealed that the proposed combined approach favours the organization of a three-dimensional tissue-like structure promoting a remarkable arrangement of the cells and the neo-extracellular matrix, reflecting into enhanced mechanical strength. The proposed method represents a novel approach for tendon tissue engineering, demonstrating how the combined effect of biochemical and mechanical stimuli ameliorates biological and mechanical properties of the artificial tissue compared to those obtained with single inducement.

Cells and extracellular matrix interplay in cardiac valve disease: because age matters.

Cardiovascular aging is a physiological process affecting all components of the heart. Despite the interest and experimental effort lavished on aging of cardiac cells, increasing evidence is pointing at the pivotal role of extracellular matrix (ECM) in cardiac aging. Structural and molecular changes in ECM composition during aging are at the root of significant functional modifications at the level of cardiac valve apparatus. Indeed, calcification or myxomatous degeneration of cardiac valves and their functional impairment can all be explained in light of age-related ECM alterations and the reciprocal interplay between altered ECM and cellular elements populating the leaflet, namely valvular interstitial cells and valvular endothelial cells, is additionally affecting valve function with striking reflexes on the clinical scenario. The initial experimental findings on this argument are underlining the need for a more comprehensive understanding on the biological mechanisms underlying ECM aging and remodeling as potentially constituting a pharmacological therapeutic target or a basis to improve existing prosthetic devices and treatment options. Given the lack of systematic knowledge on this topic, this review will focus on the ECM changes that occur during aging and on their clinical translational relevance and implications in the bedside scenario.

Characterization of age-related changes of tendon stem cells from adult human tendons.

PURPOSE: The present study evaluated the presence of stem cells in hamstring tendons from adult subjects of different ages. The aim was to isolate, characterize and expand these cells in vitro, and to evaluate whether cell activities are influenced by age. METHODS: Tendon stem cells (TSCs) were isolated through magnetic sorting from the hamstring tendons of six patients. TSC percentage, morphology and clonogenic potential were evaluated, as well as the expression of specific surface markers. TSC multi-potency was also investigated as a function of age, and quantitative polimerase chain reaction was used to evaluate gene expression of TSCs cultured in suitable differentiating media. RESULTS: The presence of easily harvestable stem cell population within adult human hamstring tendons was demonstrated. These cells exhibit features such as clonogenicity, multi-potency and mesenchymal stem cells markers expression. The age-related variations in human TSCs affect the number of isolated cells and their self-renewal potential, while multi-potency assays are not influenced by tendon ageing, even though cells from younger individuals expressed higher levels of osteogenic and adipogenic genes, while chondrogenic genes were highly expressed in cells from older individuals. CONCLUSIONS: These results may open new opportunities to study TSCs to better understand tendon physiology, healing and pathological processes such as tendinopathy and degenerative age-related changes opening new frontiers in the management of tendinopathy and tendon ruptures.

On the compatibility of single-cell microcarriers (nanovials) with microfluidic impedance cytometry.

We investigate for the first time the compatibility of nanovials with microfluidic impedance cytometry (MIC). Nanovials are suspendable crescent-shaped single-cell microcarriers that enable specific cell adhesion, the creation of compartments for undisturbed cell growth and secretion, as well as protection against wall shear stress. MIC is a label-free single-cell technique that characterizes flowing cells based on their electrical fingerprints and it is especially targeted to cells that are naturally in suspension. Combining nanovial technology with MIC is intriguing as it would represent a robust framework for the electrical analysis of single adherent cells at high throughput. Here, as a proof-of-concept, we report the MIC analysis of mesenchymal stromal cells loaded in nanovials. The electrical analysis is supported by numerical simulations and validated by means of optical analysis. We demonstrate that the electrical diameter can discriminate among free cells, empty nanovials, cell-loaded nanovials, and clusters, thus grounding the foundation for the use of nanovials in MIC. Furthermore, we investigate the potentiality of MIC to assess the electrical phenotype of cells loaded in nanovials and we draw directions for future studies.

Electrospinning of PCL/PVP blends for tissue engineering scaffolds.

Currently, one of the main drawbacks of using poly(ε-caprolactone) in the biomedical and pharmaceutical fields is represented by its low biodegradation rate. To overcome this limitation, electrospinning of PCL blended with a water-soluble poly(N-vinyl-2-pyrrolidone) was used to fabricate scaffolds with tunable fiber surface morphology and controllable degradation rates. Electrospun scaffolds revealed a highly immiscible blend state. The incorporated PVP phase was dispersed as inclusions within the electrospun fibers, and then easily extracted by immersing them in cell culture medium, exhibiting nanoporosity on the fiber surface. As a striking result, nanoporosity facilitated not only fiber biodegradation rates, but also improved cell attachment and spreading on the blend electrospun scaffolds. The present findings demonstrate that simultaneous electrospinning technique for PCL with water-soluble PVP provides important insights for successful tuning biodegradation rate for the PCL electrospun scaffolds but not limited to expand other high valuable biocompatible polymers for the future biomedical applications, ranging from tissue regeneration to controlled drug delivery.

Bioactive electrospun scaffold for annulus fibrosus repair and regeneration.

PURPOSE: Annulus fibrosus (AF) tissue engineering is gathering increasing interest for the development of strategies to reduce recurrent disc herniation (DH) rate and to increase the effectiveness of intervertebral disc regeneration strategies. This study evaluates the use of a bioactive microfibrous poly(L-lactide) scaffold releasing Transforming Growth Factor (TGF)-ß1 (PLLA/TGF) for the repair and regeneration of damaged AF. METHODS: The scaffold was synthesized by electrospinning, with a direct incorporation of TGF-ß1 into the polymeric solution, and characterized in terms of morphology and drug release profile. Biological evaluation was performed with bovine AF cells (AFCs) that were cultured on the scaffold up to 3 weeks to quantitatively assess glycosaminoglycans and total collagen production, using bare electrospun PLLA as a control. Histological evaluation was performed to determine the thickness of the deposited neo-ECM. RESULTS: Results demonstrated that AFCs cultured on PLLA/TGF deposited a significantly greater amount of glycosaminoglycans and total collagen than the control, with higher neo-ECM thickness. CONCLUSIONS: PLLA/TGF scaffold induced an anabolic stimulus on AFCs, mimicking the ECM three-dimensional environment of AF tissue. This bioactive scaffold showed encouraging results that allow envisaging an application for AF tissue engineering strategies and AF repair after discectomy for the prevention of recurrent DH.

Droplet-based microfluidic synthesis of nanogels for controlled drug delivery: tailoring nanomaterial properties via pneumatically actuated flow-focusing junction.

Conventional batch syntheses of polymer-based nanoparticles show considerable shortcomings in terms of scarce control over nanomaterials morphology and limited lot-to-lot reproducibility. Droplet-based microfluidics represents a valuable strategy to overcome these constraints, exploiting the formation of nanoparticles within discrete microdroplets. In this work, we synthesized nanogels (NGs) composed of hyaluronic acid and polyethyleneimine using a microfluidic flow-focusing device endowed with a pressure-driven micro-actuator. The actuator achieves real-time modulation of the junction orifice width, thereby regulating the microdroplet diameter and, as a result, the NG size. Acting on process parameters, NG hydrodynamic diameter could be tuned in the range 92-190 nm while preserving an extremely low polydispersity (0.015); those values are hardly achievable in batch syntheses and underline the strength of our toolbox for the continuous in-flow synthesis of nanocarriers. Furthermore, NGs were validated in vitro as a drug delivery system in a representative case study still lacking an effective therapeutic treatment: ovarian cancer. Using doxorubicin as a chemotherapeutic agent, we show that NG-mediated release of the drug results in an enhanced antiblastic effect vs. the non-encapsulated administration route even at sublethal dosages, highlighting the wide applicability of our microfluidics-enabled nanomaterials in healthcare scenarios.

A G-CSF functionalized scaffold for stem cells seeding: a differentiating device for cardiac purposes.

Myocardial infarction and its consequences represent one of the most demanding challenges in cell therapy and regenerative medicine. Transfer of skeletal myoblasts into decompensated hearts has been performed through intramyocardial injection. However, the achievements of both cardiomyocyte differentiation and precise integration of the injected cells into the myocardial wall, in order to augment synchronized contractility and avoid potentially life-threatening alterations in the electrical conduction of the heart, still remain a major target to be pursued. Recently, granulocytes colony-stimulating factor (G-CSF) fuelled the interest of researchers for its direct effect on cardiomyocytes, inhibiting both apoptosis and remodelling in the failing heart and protecting from ventricular arrhythmias through the up-regulation of connexin 43 (Cx43). We propose a tissue engineering approach concerning the fabrication of an electrospun cardiac graft functionalized with G-CSF, in order to provide the correct signalling sequence to orientate myoblast differentiation and exert important systemic and local effects, positively modulating the infarction microenvironment. Poly-(L-lactide) electrospun scaffolds were seeded with C2C12 murine skeletal myoblast for 48 hrs. Biological assays demonstrated the induction of Cx43 expression along with morphostructural changes resulting in cell elongation and appearance of cellular junctions resembling the usual cardiomyocyte arrangement at the ultrastructural level. The possibility of fabricating extracellular matrix-mimicking scaffolds able to promote myoblast pre-commitment towards myocardiocyte lineage and mitigate the hazardous environment of the damaged myocardium represents an interesting strategy in cardiac tissue engineering.

Synthesis of Nanogels: Current Trends and Future Outlook.

Nanogels represent an innovative platform for tunable drug release and targeted therapy in several biomedical applications, ranging from cancer to neurological disorders. The design of these nanocarriers is a pivotal topic investigated by the researchers over the years, with the aim to optimize the procedures and provide advanced nanomaterials. Chemical reactions, physical interactions and the developments of engineered devices are the three main areas explored to overcome the shortcomings of the traditional nanofabrication approaches. This review proposes a focus on the current techniques used in nanogel design, highlighting the upgrades in physico-chemical methodologies, microfluidics and 3D printing. Polymers and biomolecules can be combined to produce ad hoc nanonetworks according to the final curative aims, preserving the criteria of biocompatibility and biodegradability. Controlled polymerization, interfacial reactions, sol-gel transition, manipulation of the fluids at the nanoscale, lab-on-a-chip technology and 3D printing are the leading strategies to lean on in the next future and offer new solutions to the critical healthcare scenarios.

Enhanced Medical and Community Face Masks with Antimicrobial Properties: A Systematic Review.

Face masks help to limit transmission of infectious diseases entering through the nose and mouth. Beyond reprocessing and decontamination, antimicrobial treatments could extend the lifetime of face masks whilst also further reducing the chance of disease transmission. Here, we review the efficacy of treatments pertaining antimicrobial properties to medical face masks, filtering facepiece respirators and non-medical face masks. Searching databases identified 2113 studies after de-duplication. A total of 17 relevant studies were included in the qualitative synthesis. Risk of bias was found to be moderate or low in all cases. Sixteen articles demonstrated success in avoiding proliferation (if not elimination) of viruses and/or bacteria. In terms of methodology, no two articles employed identical approaches to efficacy testing. Our findings highlight that antimicrobial treatment is a promising route to extending the life and improving the safety of face masks. In order to reach significant achievements, shared and precise methodology and reporting is needed.

Graphene-laden hydrogels: A strategy for thermally triggered drug delivery.

The synthesis of graphene-based materials has attracted considerable attention in drug delivery strategies. Indeed, the conductivity and mechanical stability of graphene have been investigated for controlled and tunable drug release via electric or mechanical stimuli. However, the design of a thermo-sensitive scaffold using pristine graphene (without distortions related to the oxidation processes) has not been deeply investigated yet, although it may represent a promising approach for several therapeutic treatments. Here, few-layer graphene was used as a nanofiller in a hydrogel system with a thermally tunable drug release profile. In particular, varying the temperature (25 °C, 37 °C and 44 °C), responsive drug releases were noticed and hypothesized depending on the formation and perturbation of π-π interactions involving graphene, the polymeric matrix and the model drug (diclofenac). As a result, these hybrid hydrogels show a potential application as thermally triggered drug release systems in several healthcare scenarios.

Nano-encapsulation of hydroxytyrosol into formulated nanogels improves therapeutic effects against hepatic steatosis: An in vitro study.

Nanomaterials hold promise as a straightforward approach for enhancing the performance of bioactive compounds in several healthcare scenarios. Indeed, nanoencapsulation represents a valuable strategy to preserve the bioactives, maximizing their bioavailability. Here, a nanoencapsulation strategy for the treatment of nonalcoholic fatty liver disease (NAFLD) is presented. NAFLD represents the most common chronic liver disease in Western societies, and still lacks an effective therapy. Hydroxytyrosol (HT), a naturally occurring polyphenol, has been shown to protect against hepatic steatosis through its lipid-lowering, antioxidant and anti-inflammatory activities. However, the efficient delivery of HT to hepatocytes remains a crucial aspect: the design of smart nanogels appears as a promising tool to promote its intracellular uptake. In this paper, we disclose the synthesis of nanogel systems based on polyethylene glycol and polyethyleneimine which have been tested in an in vitro model of hepatic steatosis at two different concentrations (0.1 mg/mL and 0.5 mg/mL), taking advantage of high-content analysis tools. The proposed HT-loaded nanoscaffolds are non-toxic to cells, and their administration showed a significant decrease in the intracellular triglyceride levels, restoring cell viability and outperforming the results achievable with HT in its non-encapsulated form. Moreover, nanogels do not induce oxidative stress, thus demonstrating their biosafety. Overall, the formulated nanogel system achieves superior performance compared to conventional drug administration routes and hence represents a promising strategy for the management of NAFLD.

Comparative study of different techniques for the sterilization of poly-L-lactide electrospun microfibers: effectiveness vs. material degradation.

Electrospinning of biopolymeric scaffolds is a new and effective approach for creating replacement tissues to repair defects and/or damaged tissues with direct clinical application. However, many hurdles and technical concerns regarding biological issues, such as cell retention and the ability to grow, still need to be overcome to gain full access to the clinical arena. Interaction with the host human tissues, immunogenicity, pathogen transmission as well as production costs, technical expertise, and good manufacturing and laboratory practice requirements call for careful consideration when aiming at the production of a material that is available off-the-shelf, to be used immediately in operative settings. The issue of sterilization is one of the most important steps for the clinical application of these scaffolds. Nevertheless, relatively few studies have been performed to systematically investigate how sterilization treatments may affect the properties of electrospun polymers for tissue engineering. This paper presents the results of a comparative study of different sterilization techniques applied to an electrospun poly-L-lactide scaffold: soaking in absolute ethanol, dry oven and autoclave treatments, UV irradiation, and hydrogen peroxide gas plasma treatment. Morphological and chemical characterization was coupled with microbiological sterility assay to validate the examined sterilization techniques in terms of effectiveness and modifications to the scaffold. The results of this study reveal that UV irradiation and hydrogen peroxide gas plasma are the most effective sterilization techniques, as they ensure sterility of the electrospun scaffolds without affecting their chemical and morphological features.

Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell-Laden Thermogel: An Effective Tool to Assess Drug-Induced Hepatotoxic Response.

A thermoresponsive Pluronic/alginate semisynthetic hydrogel is used to bioprint 3D hepatic constructs, with the aim to investigate liver-specific metabolic activity of the 3D constructs compared to traditional 2D adherent cultures. The bioprinting method relies on a bioinert hydrogel and is characterized by high-shape fidelity, mild depositing conditions and easily controllable gelation mechanism. Furthermore, the dissolution of the sacrificial Pluronic templating agent significantly ameliorates the diffusive properties of the printed hydrogel. The present findings demonstrate high viability and liver-specific metabolic activity, as assessed by synthesis of urea, albumin, and expression levels of the detoxifying CYP1A2 enzyme of cells embedded in the 3D hydrogel system. A markedly increased sensitivity to a well-known hepatotoxic drug (acetaminophen) is observed for cells in 3D constructs compared to 2D cultures. Therefore, the 3D model developed herein may represent an in vitro alternative to animal models for investigating drug-induced hepatotoxicity.

Drug releasing systems in cardiovascular tissue engineering.

Heart disease and atherosclerosis are the leading causes of morbidity and mortality worldwide. The lack of suitable autologous grafts has produced a need for artificial grafts; however, current artificial grafts carry significant limitations, including thrombosis, infection, limited durability and the inability to grow. Tissue engineering of blood vessels, cardiovascular structures and whole organs is a promising approach for creating replacement tissues to repair congenital defects and/or diseased tissues. In an attempt to surmount the shortcomings of artificial grafts, tissue-engineered cardiovascular graft (TECVG), constructs obtained using cultured autologous vascular cells seeded onto a synthetic biodegradable polymer scaffold, have been developed. Autologous TECVGs have the potential advantages of growth, durability, resistance to infection, and freedom from problems of rejection, thrombogenicity and donor scarcity. Moreover polymers engrafted with growth factors, cytokines, drugs have been developed allowing drug-releasing systems capable of focused and localized delivery of molecules depending on the environmental requirements and the milieu in which the scaffold is placed. A broad range of applications for compound-releasing, tissue-engineered grafts have been suggested ranging from drug delivery to gene therapy. This review will describe advances in the development of drug-delivery systems for cardiovascular applications focusing on the manufacturing techniques and on the compounds delivered by these systems to date.

Textured and smooth breast implants: is there a difference in the chemical structure of silicone?: an analysis with fourier transformation infrared and attenuated total reflectance spectroscopy.

Scientific controversy concerning silicone and its biocompatibility has been ongoing for the last 10 years. This study on textured and smooth silicone breast implant shells using fourier transformation infrared spectroscopy associated with attenuated total reflectance cells aimed to identify eventual chemical modifications of silicone induced by texturization. The surfaces of 8 new implants produced by 2 well-known manufactures have been taken into consideration. A sample 1 cm2 has been harvested from the anterior and posterior sides of textured and smooth shells. Infrared spectra were then recorded, evaluated, and compared with the reference spectrum of pure silicone. Potentially reactive groups, known as silanols, were identified, in all shells, intensity increasing in textured implants (P < 0.05), whereas no silanols were detected in the spectrum of pure silicone. These results suggest that polar groups, present in manipulated silicone might influence capsula formation.