Insights into hydrothermal treatment of biomass blends: Assessing energy yield and ash content for biofuel enhancement.

This study explores the Hydrothermal Carbonization (HTC) treatment of lignocellulosic biomass blends, delving into the influence of several key parameters: temperature, additive nature and dosage, residence time, and biomass composition. Rapeseeds, Pinus radiata sawdust, oat husks, and pressed olive served as the studied biomasses. One hundred twenty-eight experiments were conducted to assess the effects on mass yield (MY), energy yield (EY), higher heating value (HHV), and final ash content (ASH) by a Factorial Experimental Design. The derived model equations demonstrated a robust fit to the experimental data, averaging an R2 exceeding 0.94, affirming their predictive accuracy. The observed energy yield ranged between 65% and 80%, notably with sawdust and olive blends securing EY levels surpassing 70%, while rapeseed blends exhibited the highest HHV at 25 MJ/kg. Temperature emerged as the most influential factor, resulting in an 11% decrease in MY and a substantial 2.20 MJ/kg increase in HHV. Contrastingly, blend composition and additive presence significantly impacted ASH and EY, with all blends exhibiting increased ASH in the presence of additives. Higher initial hemicellulose and aqueous extractive content in raw biomass correlated proportionally with heightened HHV.

Synergistic Effects and Mechanistic Insights into the Co-Hydropyrolysis of Chilean Oak and Polyethylene: Unlocking the Potential of Biomass-Plastic Valorisation.

This study employed a hydrogen atmosphere in an analytical reactor to investigate the thermochemical transformation of Chilean Oak (ChO) and polyethylene. Thermogravimetric assays and compositional analyses of the evolved gaseous chemicals provided valuable insights regarding the synergistic effects during the co-hydropyrolysis of biomass and plastics. A systematic experimental design approach assessed the contributions of different variables, revealing the significant influence of the biomass/plastic ratio and hydrogen pressure. Analysis of the gas phase composition showed that co-hydropyrolysis with LDPE resulted in lower levels of alcohols, ketones, phenols, and oxygenated compounds. ChO exhibited an average oxygenated compound content of 70.13%, while LDPE and HDPE had 5.9% and 1.4%, respectively. Experimental assays under specific conditions reduced ketones and phenols to 2-3%. Including a hydrogen atmosphere during co-hydropyrolysis contributes to enhanced reaction kinetics and reduced formation of oxygenated compounds, indicating its beneficial role in improving reactions and diminishing the production of undesired by-products. Synergistic effects were observed, with reductions of up to 350% for HDPE and 200% for LDPE compared to the expected values, achieving higher synergistic coefficients with HDPE. The proposed reaction mechanism provides a comprehensive understanding of the simultaneous decomposition of biomass and polyethylene polymer chains, forming valuable bio-oil products and demonstrating the how the hydrogen atmosphere modulates and influences the reaction pathways and product distribution. For this reason, the co-hydropyrolysis of biomass-plastic blends is a technique with great potential to achieve lower levels of oxygenated compounds, which should be further explored in subsequent studies to address scalability and efficiency at pilot and industrial levels.

Hybrid porous media gasification of urban solid waste pre-treated by hydrothermal carbonization.

Global population growth and rising consumption levels have significantly increased resource use and energy demand, leading to higher greenhouse gas concentrations and increased waste output. As a result, alternative waste treatment methods for sustainable municipal solid waste (MSW) management are crucial. This research evaluates the efficiency of integrating hydrothermal carbonization (HTC) and gasification for an optimized MSW biomass blend. HTC was conducted for one hour at 220°C in a 5 L reactor, followed by gasification in a hybrid porous medium gasifier. The study investigated the effects of different filtration speeds on combustion temperature and hydrogen concentrations. The results showed that a filtration speed of 35 cm/s resulted in a maximum combustion temperature of 1035.7°C. The temperature remained consistent across filter speeds, while higher velocities yielded higher hydrogen concentrations. Additionally, increasing the filtration velocity raised temperatures in the hybrid bed while increasing the volumetric fraction of biomass decreased maximum temperatures. This research contributes to the understanding of merging HTC and gasification for MSW biomass blend treatment, aiming to reduce environmental impacts and costs while promoting renewable resources for long-term energy production.

Valorization of oat husk by hydrothermal carbonization: Optimization of process parameters and anaerobic digestion of spent liquors.

The hydrothermal carbonization (HTC) optimization of oat husk was performed using a response surface methodology. Furthermore, anaerobic digestion (AD) of spent liquor and hydrochar addition were evaluated in the biomethane potential (BMP) test. Results found that temperature influences the most in the studied responses (i.e., mass yield (MY) and higher heating value (HHV)). Optimal hydrochar MY (53.8%) and HHV (21.5 MJ/kg) were obtained for 219.2 °C, 30 min, and 0.08 of biomass/water ratio. A successful prediction capability of the optimization approach was observed, archiving an error < 1% between predicted and validated responses. The BMP experiment showed the feasibility of spent liquor as a potential substrate to be treated by AD (144 NmLCH4/gCOD). Hydrochar boosted the methane production of spent liquor increasing up to 17% compared to digestion with no hydrochar addition. These findings provide new insights regarding oat husk valorization by integrating HTC and AD for energy production.

An environmental assessment for municipal organic waste and sludge treated by hydrothermal carbonization.

Climate change is the world's greatest challenge today, the reason why it is urgent to optimize industrial processes and find new renewable energy sources. Hydrothermal carbonization (HTC) is one of the Waste-to-Energy technologies with greater projections due to its operative advantages. However, for its large-scale implementation, there are challenges related to the variability of the composition of the waste biomass and the seasonal and geographical availability. This research applied the Life Cycle Analysis methodology to evaluate the environmental impacts caused by three biomasses blends as raw material in the HTC process at laboratory scale. The blends analyzed considered different organic fractions of municipal solid waste (food and pruning) and sewage sludge. The results showed that blend 1 had a lower environmental impact for the case of production in the experimental laboratory level, compared with blends 2 and 3. This is mainly due to its greater calorific value and mass yield, which allows obtaining more hydrochar compared with the other blends, increasing the energy efficiency of the process. Also, between 87.94% and 98.00% of the energy reduction is required to obtain neutral impacts regarding the energy requirements in the experimental laboratory level scenario and the Chilean energy matrix. The processing of blends in HTC has excellent potential in a context where municipal solid wastes have been disposed in sanitary landfills or dumps, as in most emerging countries. Since this study incorporated data from the literature, future studies should perform an elemental analysis to provide experimental and differentiated data.