Understanding Electronic Properties and Tunable Schottky Barriers in a Graphene/Boron Selenide van der Waals Heterostructure.

van der Waals heterostructures provide a powerful platform for engineering the electronic properties and for exploring exotic physical phenomena of two-dimensional materials. Here, we construct a graphene/BSe heterostructure and examine its electronic characteristics and the tunability of contact types under electric fields. Our results reveal that the graphene/BSe heterostructure is energetically, mechanically, and thermodynamically stable at room temperature. It forms a p-type Schottky contact and exhibits a high carrier mobility, making it a promising candidate for future Schottky field-effect transistors. Furthermore, applying an electric field not only reduces contact barriers but also induces a transition from a p-type to an n-type Schottky contact and from a Schottky to an ohmic contact, offering further potential for the control and manipulation of the heterostructure's electronic properties. Our findings offer a rational basis for the design of energy-efficient and tunable heterostructure devices based on the graphene/BSe heterostructure.

Electrochemical Plasma for Treating 2,4,5-Trichlorophenoxyacetic Acid in a Water Environment Using Iron Electrodes.

Herbicide compounds containing aromatic rings and chlorine atoms, such as 2,4,5-trichlorophenoxyacetic (2,4,5-T), cause serious environmental pollution. Furthermore, these compounds are very difficult to decompose by chemical, physical, and biological techniques. Fortunately, the high-voltage direct current electrochemical technique can be controlled to form a plasma on metallic electrodes. It creates active species, such as H2, O2, and H2O2, and free radicals, such as H•, O•, and OH•. Free radicals that have a high oxidation potential (e.g., OH•) are highly effective in oxidizing benzene-oring compounds. Iron electrodes are used in the study to combine the dissolving process of the iron anode electrode to create Fe2+ ions and the electrochemical Fenton reaction. In addition, the flocculation process by Fe(OH)2 also occurs and the plasma appears with a voltage of 5 kV on the iron electrode in a solution of 30 mg L-1 of 2,4,5-T. After a period of time of the reaction, the aromatic-oring compounds containing chlorine were effectively treated, and the electric conductivity of the solution increased due to the amount of Cl- ions released in the solution and the decrease in the pH value. The degradable products of 2,4,5-T were qualitatively characterized by gas chromatography-mass spectrometry (GC-MS), and it was determined that straight-chain carboxylic acids are formed in the solution. These compounds are easy to oxidize thoroughly under appropriate conditions in a solution via OH• free radicals. Moreover, 2,4,5-T was also quantitatively analyzed using a calibration curve from GC-MS and high-performance liquid chromatography (HPLC). Furthermore, this work also suggests that the performance of the treatment process can be optimized by controlling the technological factors, such as the input voltage, the distance between anodic and cathodic electrodes, the initial concentration of 2,4,5-T, and flowing air through the solution that represents an approximately 99.83% degradable efficiency. Finally, the work demonstrates a potential technology for treating the 2,4,5-T compound, particularly for environmental pollution treatments.

Growth of segmented gold nanorods with nanogaps by the electrochemical wet etching technique for single-electron transistor applications.

The growth of multisegment nanorods comprising gold (Au) and sacrificial silver (Ag) segments (Au-Ag-Au or Au-Ag-Au-Ag-Au) using the electrochemical wet etching method is reported. The nanorods were fabricated using an alumina template of thickness 100 microm and pore size of 200 nm. A variety of nanorods from single to seven segments comprising alternate Au and Ag segments were fabricated with better control of growth rate. The multisegment nanorods were selectively etched by removing the Ag segments to create gaps in the fabricated nanorods. A careful investigation led to the creation of a wide variety of nanogaps in the fabricated multisegment nanorods. The size of the nanogap was controlled by the passage of current through the electrochemical process, and size below 10 nm was achievable at exchanged charges of approximately 1 mC. A further lowering in the size of nanogaps was achieved by diluting the silver plating solution and a segmented nanorod with nanogap (Au-nanogap-Au) of 3.8 nm at exchanged charges of 0.2 mC was successfully created. In addition, segmented nanorods with two or more nanogaps (Au-nanogap-Au-nanogap-Ag) placed symmetrically and asymmetrically on either side of the central Au segments were also created. A prototype of a single-electron transistor device based on segmented nanorods with two nanogaps is proposed. The results obtained could form the basis for the realization of quantum tunneling devices where the barrier thickness is very critical and demands values less than 5 nm. The encouraging results show the promise of multisegment nanorods for fabricating devices working at the de Broglie wavelength such as single-electron transistors.

Facile on-chip electrospinning of ZnFe2O4 nanofiber sensors with excellent sensing performance to H2S down ppb level.

ZnFe2O4 nanofiber gas sensors are cost-effectively fabricated by direct electrospinning on microelectrode chip with Pt interdigitated electrodes and subsequent calcination under different conditions to maximize their response to H2S gas. The synthesized nanofibers of approximately 30-100 nm in diameter show typical spider-net-like morphology of the electrospun nanofibers. The ZnFe2O4 nanofibers comprise many 10-25 nm nanograins, which results in multi-porous structures. Moreover, the nanofibers exhibit the single phase of cubic-spinel-structure ZnFe2O4. The density, crystallinity and grain size of ZnFe2O4 nanofiber that strongly affect gas-sensing properties can be optimized by controlling electrospun time, annealing temperature, annealing time and heating rate. Under optimal conditions, the ZnFe2O4 nanofiber sensors exhibit high sensitivity and selectivity to H2S at sub-ppm levels. Excellent gas-sensing performances are attributed to effects of multi-porous structure, nanograin size and crystallinity, which is explained by the sensing mechanisms of ZnFe2O4 nanofiber sensors to H2S gas.

How important are rats as vectors of leptospirosis in the Mekong Delta of Vietnam?

Leptospirosis is a zoonosis known to be endemic in the Mekong Delta of Vietnam, even though clinical reports are uncommon. We investigated leptospira infection in rats purchased in food markets during the rainy season (October) (n=150), as well as those trapped during the dry season (February-March) (n=125) in the region using RT-PCR for the lipL32 gene, confirmed by 16S rRNA, as well as by the microscopic agglutination test (MAT). Results were compared with the serovar distribution of human cases referred from Ho Chi Minh City hospitals (2004-2012) confirmed by MAT (n=45). The MAT seroprevalence among rats was 18.3%. The highest MAT seroprevalence corresponded, in decreasing order, to: Rattus norvegicus (33.0%), Bandicota indica (26.5%), Rattus tanezumi (24.6%), Rattus exulans (14.3%), and Rattus argentiventer (7.1%). The most prevalent serovars were, in descending order: Javanica (4.6% rats), Lousiana (4.2%), Copenageni (4.2%), Cynopterie (3.7%), Pomona (2.9%), and Icterohaemorrhagiae (2.5%). A total of 16 rats (5.8%) tested positive by RT-PCR. Overall, larger rats tended to have a higher prevalence of detection. There was considerable agreement between MAT and PCR (kappa=0.28 [0.07-0.49]), although significantly more rats were positive by MAT (McNemar 29.9 (p<0.001). MAT prevalence was higher among rats during the rainy season compared with rats in the dry season. There are no current available data on leptospira serovars in humans in the Mekong Delta, although existing studies suggest limited overlapping between human and rat serovars. Further studies should take into account a wider range of potential reservoirs (i.e., dogs, pigs) as well as perform geographically linked co-sampling of humans and animals to establish the main sources of leptospirosis in the region.