Cesarean delivery is associated with lower neonatal mortality among breech pregnancies: a systematic review and meta-analysis of preterm deliveries ≤32 weeks of gestation.

OBJECTIVE: To investigate the association between actual and planned modes of delivery, neonatal mortality, and short-term outcomes among preterm pregnancies ≤32 weeks of gestation. DATA SOURCES: A systematic literature search was conducted in 3 main databases (PubMed, EMBASE, and the Cochrane Central Register of Controlled Trials from inception to November 16, 2022. The protocol was registered in advance in the International Prospective Register of Systematic Reviews (CRD42022377870). STUDY ELIGIBILITY CRITERIA: Eligible studies examined pregnancies ≤32nd gestational week. All infants received active care, and the outcomes were reported separately by different modes of delivery. Singleton and twin pregnancies at vertex and breech presentations were included. Studies that included pregnancies complicated with preeclampsia and abruptio placentae were excluded. Primary outcomes were neonatal mortality and intraventricular hemorrhage. STUDY APPRAISAL AND SYNTHESIS METHODS: Articles were selected by title, abstract, and full text, and disagreements were resolved by consensus. Random effects model-based odds ratios with corresponding 95% confidence intervals were calculated for dichotomous outcomes. Risk Of Bias In Non-randomized Studies - of Interventions-I was used to assess the risk of bias. RESULTS: A total of 19 observational studies were included involving a total of 16,042 preterm infants in this systematic review and meta-analysis. Actual cesarean delivery improves survival (odds ratio, 0.62; 95% confidence interval, 0.42-0.9) and decreases the incidence of intraventricular hemorrhage (odds ratio, 0.70; confidence interval, 0.57-0.85) compared to vaginal delivery. Planned cesarean delivery does not improve the survival of very and extremely preterm infants compared to vaginal delivery (odds ratio, 0.87; 95% confidence interval, 0.53-1.44). Subset analysis found significantly lower odds of death for singleton breech preterm deliveries born by both planned (odds ratio, 0.56; 95% confidence interval, 0.32-0.98) and actual (odds ratio, 0.34; 95% confidence interval, 0.13-0.88) cesarean delivery. CONCLUSION: Cesarean delivery should be the mode of delivery for preterm ≤32 weeks of gestation breech births due to the higher mortality in preterm infants born via vaginal delivery.

Cyclic testing of standalone ALIF versus TLIF in lumbosacral spines of low bone mineral density: an ex vivo biomechanical study.

PURPOSE: Screwed anterior lumbar interbody fusion (SALIF) alleviates the need for supplemental posterior fixation leading to reduction of perioperative morbidity. Specifically, elderly and multimorbid patients would benefit from shorter operative time and faster recovery but tend to have low bone mineral density (BMD). The current study aimed to compare loosening, defined as increase of ROM and NZ, of SALIF versus transforaminal lumbar interbody fusion (TLIF) under cyclic loading in cadaveric spines with reduced BMD. METHODS: Twelve human spines (L4-S2; 6 male 6 female donors; age 70.6 ± 19.6; trabecular BMD of L5 84.2 ± 24.4 mgHA/cm3, range 51-119 mgHA/cm3) were assigned to two groups. SALIF or TLIF were instrumented at L5/S1. Range of motion (ROM) and neutral zone (NZ) were assessed before and after axial cyclic loading (0-1150 N, 2000 cycles, 0.5 Hz) in flexion-extension (Flex-Ext), lateral bending, (LB), axial rotation (AR). RESULTS: ROM of the SALIF specimens increased significantly in all loading directions (p ≤ 0.041), except for left AR (p = 0.053), whereas for TLIF it increased significantly in left LB (p = 0.033) and Flex (p = 0.015). NZ of SALIF showed increase in Flex-Ext and LB, whereas NZ of TLIF did not increase significantly in any motion direction. CONCLUSIONS: Axial compression loading caused loosening of SALIF in Flex-Ext and LB, but not TLIF at L5/S1 in low BMD specimens. Nevertheless, Post-cyclic ROM and NZ of SALIF is comparable to TLIF. This suggests that, neither construct is optimal for the use in patients with reduced BMD.

Atrial Arrhythmia and Bradycardia as a Presentation of Congenital Long QT Syndrome.

We present a term newborn with atrial arrhythmia on the first day of life (DOL). An echocardiogram showed normal structure and normal function; laboratory testing showed normal electrolytes and thyroid function. After initiation of flecainide, the EKG on DOL 2 showed significant and increasing bradycardia with atrial arrhythmia and extremely prolonged QTc interval. Flecainide was stopped and esmolol started. After 6 h of treatment, atrial tachycardia was suppressed, and the rhythm converted to sinus. Genetic testing found variants of unknown significance in the ALPK3 gene and KCNQ1 gene, which has been associated with long QT syndrome (LQTs). LQTs in infants can present as bradycardia, 2:1 AV block, or torsades de pointes. Our review of the literature found only one other case report of atrial arrhythmia in a newborn with congenital LQTs. Diagnosis of LQTs via EKG alone is difficult in neonates since the ST segment and T wave on the first DOL are usually flattened, making correct measurement of the QTc interval difficult. ß-blockers, the first line of treatment for LQTs, are known to shorten QTc intervals and prevent arrhythmia events. As in our patient, ß-blockers may be helpful for atrial arrhythmia prevention in patients with adrenergically mediated atrial tachycardia. In conclusion, atrial arrhythmia with bradycardia can be a presentation of congenital LQTs and be difficult to recognize. For neonates with this presentation with no evidence of myocarditis, congenital heart disease, or significant respiratory illness, genetic congenital LQTs should be highly suspected, especially when associated with low resting heart rates.

myHealthHub for older adult inpatients to reduce loneliness, and improve patient engagement and mental health: protocol of a pilot randomized controlled trial.

OBJECTIVES: Older Canadian adults make up 85% of hospital stays which are associated with increased loneliness, stress, anxiety, and/or depression. There is a need for novel approaches to reduce loneliness and mental health outcomes in older adult hospital inpatients to prevent further strain on an already overwhelmed healthcare system. METHODS: This is a pilot randomized controlled trial (RCT) exploring the efficacy of a bedside multimodal interaction system, myHealthHub, on loneliness, quality of life (QOL), patient engagement, and other mental health outcomes compared to an active control group in older adult inpatients (n = 60) from baseline to 5-days. Qualitative analyses will be conducted through semi-structured interviews with older adults (n = 8-10) and hospital staff, nurses, and clinicians (n = 4-5) facilitating the service to evaluate patient engagement and experience with myHealthHub. RESULTS: Not applicable. CONCLUSION: This novel pilot clinical trial will obtain preliminary data on the efficacy of myHealthHub in reducing loneliness, QOL, patient engagement, and mental health outcomes in older adult inpatients. If successful, this could provide a potential means to improve patient experience in hospitals and reduce the burden and additional expense on the healthcare system.

Knot holding capacity of two different high-strength sutures-a biomechanical analysis.

PURPOSE: The number of seven required throws per knot was previously reported as providing sufficient security against slippage. A novel high-strength suture featuring dynamic tightening may allow for throw number reduction without compromising stability. The aims of this study were to (1) investigate the influence of the throw number and the effect of different ambient conditions on the knot security of two different high-strength sutures, and (2) compare their biomechanical competence. METHODS: Two sutures (FiberWire (FW) and DynaCord (DC)) were considered for preparing alternating surgical knots. The specimens were stratified for exposure to different media during biomechanical testing-namely air (dry), saline solution (wet), and fat (fatty-wet). A monotonic tensile ramp loading to failure was applied in each test run. For each suture and ambient condition, seven specimens with three to seven throws each were tested (n = 7), evaluating their slippage and ultimate force to failure. The minimum number of throws preventing suture unraveling was determined for each suture type and condition. RESULTS: For each suture type and condition, failure occurred via rupture in all specimens for the following minimum number of throws: FW-dry-7, wet-7, fatty-wet-7; DC-dry-6, wet-4, fatty-wet-5. When applying seven throws, FW demonstrated significantly larger slippage (6.5 ± 2.2 mm) versus DC (3.5 ± 0.4 mm) in wet (p = 0.004) but not in dry and fatty-wet conditions (p ≥ 0.313). CONCLUSIONS: The lower number of throws providing knot security of DC versus FW in the more realistic wet and fatty-wet conditions indicates that the novel DC suture may allow to decrease the foreign body volume and save surgical time without compromising the biomechanical competence.

Biomechanical Behavior of Injected Cement Spacers versus Traditional Cages in Low-Density Lumbar Spine under Compression Loading.

Background and Objectives: Osteoporosis renders the use of traditional interbody cages potentially dangerous given the high risk of damage in the bone-implant interface. Instead, injected cement spacers can be applied as interbody devices; however, this technique has been mainly used in cervical spine surgery. This study aimed at investigating the biomechanical behavior of cement spacers versus traditional cages in lumbar spine surgery. Materials and Methods: Destructive monotonic axial compression testing was performed on 20 human cadaveric low-density lumbar segments from elderly donors (14 f/6 m, 70.3 ± 12.0 y) treated with either injected cement spacers (n = 10) or traditional cages (n = 10) without posterior instrumentation. Stiffness, failure load and displacement were compared. The effects of bone density, vertebral geometry and spacer contact area were evaluated. Results: Cement spacers demonstrated higher stiffness, significantly smaller displacement (p < 0.001) and a similar failure load compared to traditional cages. In the cage group, stiffness and failure load depended strongly on bone density and vertebral height, whereas failure displacement depended on vertebral anterior height. No such correlations were identified with cement spacers. Conclusions: Cement spacers used in lumbar interbody stabilization provided similar compression strength, significantly smaller failure displacement and a stiffer construct than traditional cages that provided benefits mainly for large and strong vertebrae. Cement stabilization was less sensitive to density and could be more beneficial also for segments with smaller and less dense vertebrae. In contrast to the injection of cement spacers, the optimal insertion of cages into the irregular intervertebral space is challenging and risks damaging bone. Further studies are required to corroborate these findings and the treatment selection thresholds.

Efficacy of a 4-Antigen Staphylococcus aureus Vaccine in Spinal Surgery: The STaphylococcus aureus suRgical Inpatient Vaccine Efficacy (STRIVE) Randomized Clinical Trial.

BACKGROUND: Staphylococcus aureus is a global pathogen that is frequently responsible for healthcare-associated infections, including surgical site infections (SSIs). Current infection prevention and control approaches may be limited, with S. aureus antibiotic resistance remaining problematic. Thus, a vaccine to prevent or reduce S. aureus infection is critically needed. We evaluated the efficacy and safety of an investigational 4-antigen S. aureus vaccine (SA4Ag) in adults undergoing elective open posterior spinal fusion procedures with multilevel instrumentation. METHODS: In this multicenter, site-level, randomized, double-blind trial, patients aged 18-85 years received a single dose of SA4Ag or placebo 10-60 days before surgery. SA4Ag efficacy in preventing postoperative S. aureus bloodstream infection and/or deep incisional or organ/space SSIs was the primary end point. Safety evaluations included local reactions, systemic events, and adverse events (AEs). Immunogenicity and colonization were assessed. RESULTS: Study enrollment was halted when a prespecified interim efficacy analysis met predefined futility criteria. SA4Ag showed no efficacy (0.0%) in preventing postoperative S. aureus infection (14 cases in each group through postoperative day 90), despite inducing robust functional immune responses to each antigen compared with placebo. Colonization rates across groups were similar through postoperative day 180. Local reactions and systemic events were mostly mild or moderate in severity, with AEs reported at similar frequencies across groups. CONCLUSIONS: In patients undergoing elective spinal fusion surgical procedures, SA4Ag was safe and well tolerated but, despite eliciting substantial antibody responses that blocked key S. aureus virulence mechanisms, was not efficacious in preventing S. aureus infection. Clinical Trials Registration. NCT02388165.

Evaluation of Cannulated Compression Headless Screw (CCHS) as an alternative implant in comparison to standard S1-S2 screw fixation of the posterior pelvis ring: a biomechanical study.

BACKGROUND/PURPOSE: Posterior pelvis ring injuries represent typical high-energy trauma injuries in young adults. Joint stabilization with two cannulated sacroiliac (SI) screws at the level of sacral vertebrae S1 and S2 is a well-established procedure. However, high failure- and implant removal (IR) rates have been reported. Especially, the washer recovery can pose the most difficult part of the IR surgery, which is often associated with complications. The aim of this biomechanical study was to evaluate the stability of S1-S2 fixation of the SI joint using three different screw designs. METHODS: Eighteen artificial hemi-pelvises were assigned to three groups (n = 6) for SI joint stabilization through S1 and S2 corridors using either two 7.5 mm cannulated compression headless screws (group CCH), two 7.3 mm partially threaded SI screws (group PT), or two 7.3 mm fully threaded SI screws (group FT). An SI joint dislocation injury type III APC according to the Young and Burgess classification was simulated before implantation. All specimens were biomechanically tested to failure in upright standing position under progressively increasing cyclic loading. Interfragmentary and bone-implant movements were captured via motion tracking and evaluated at four time points between 4000 and 7000 cycles. RESULTS: Combined interfragmentary angular displacement movements in coronal and transverse plane between ilium and sacrum, evaluated over the measured four time points, were significantly bigger in group FT versus both groups CCH and PT, p ≤ 0.047. In addition, angular displacement of the screw axis within the ilium under consideration of both these planes was significantly bigger in group FT versus group PT, p = 0.038. However, no significant differences were observed among the groups for screw tip cutout movements in the sacrum, p = 0.321. Cycles to failure were highest in group PT (9885 ± 1712), followed by group CCH (9820 ± 597), and group FT (7202 ± 1087), being significantly lower in group FT compared to both groups CCH and PT, p ≤ 0.027. CONCLUSION: From a biomechanical perspective, S1-S2 SI joint fixation using two cannulated compression headless screws or two partially threaded SI screws exhibited better interfragmentary stability compared to two fully threaded SI screws. The former can therefore be considered as a valid alternative to standard SI screw fixation in posterior pelvis ring injuries. In addition, partially threaded screw fixation was associated with less bone-implant movements versus fully threaded screw fixation. Further human cadaveric biomechanical studies with larger sample size should be initiated to understand better the potential of cannulated compression headless screw fixation for the therapy of the injured posterior pelvis ring in young trauma patients.

Treatment of Metaphyseal Defects in Plated Proximal Humerus Fractures with a New Augmentation Technique-A Biomechanical Cadaveric Study.

Background and Objectives: Unstable proximal humerus fractures (PHFs) with metaphyseal defects-weakening the osteosynthesis construct-are challenging to treat. A new augmentation technique of plated complex PHFs with metaphyseal defects was recently introduced in the clinical practice. This biomechanical study aimed to analyze the stability of plated unstable PHFs augmented via implementation of this technique versus no augmentation. Materials and Methods: Three-part AO/OTA 11-B1.1 unstable PHFs with metaphyseal defects were created in sixteen paired human cadaveric humeri (average donor age 76 years, range 66-92 years), pairwise assigned to two groups for locked plate fixation with identical implant configuration. In one of the groups, six-milliliter polymethylmethacrylate bone cement with medium viscosity (seven minutes after mixing) was placed manually through the lateral window in the defect of the humerus head after its anatomical reduction to the shaft and prior to the anatomical reduction of the greater tuberosity fragment. All specimens were tested biomechanically in a 25° adduction, applying progressively increasing cyclic loading at 2 Hz until failure. Interfragmentary movements were monitored by motion tracking and X-ray imaging. Results: Initial stiffness was not significantly different between the groups, p = 0.467. Varus deformation of the humerus head fragment, fracture displacement at the medial humerus head aspect, and proximal screw migration and cut-out were significantly smaller in the augmented group after 2000, 4000, 6000, 8000 and 10,000 cycles, p ≤ 0.019. Cycles to 5° varus deformation of the humerus head fragment-set as a clinically relevant failure criterion-and failure load were significantly higher in the augmented group, p = 0.018. Conclusions: From a biomechanical standpoint, augmentation with polymethylmethacrylate bone cement placed in the metaphyseal humerus head defect of plated unstable PHFs considerably enhances fixation stability and can reduce the risk of postoperative complications.

Statistical Morphology and Fragment Mapping of Complex Proximal Humeral Fractures.

Background and Objectives: Proximal humerus fractures (PHFs) are common in the elderly, but the treatment results are often poor. A clear understanding of fracture morphology and distribution of cortical bone loss is important for improved surgical decision making, operative considerations, and new implant designs. The aim of this study was to develop a 3D segmentation fracture mapping technique to create a statistical description of the spatial pattern and cortical bone loss of complex PHFs. Materials and Methods: Fifty clinical computed tomography (CT) scans of complex PHFs and their contralateral intact shoulders were collected. In-house software was developed for semi-automated segmentation and fracture line detection and was combined with manual fracture reduction to the contralateral template in a commercial software. A statistical mean model of these cases was built and used to describe probability maps of the fracture lines and cortical fragments. Results: The fracture lines predominantly passed through the surgical neck and between the tuberosities and tendon insertions. The superior aspects of the tuberosities were constant fragments where comminution was less likely. Some fracture lines passed through the bicipital sulcus, but predominantly at its edges and curving around the tuberosities proximally and distally. Conclusions: A comprehensive and systematic approach was developed for processing clinical CT images of complex fractures into fracture morphology and fragment probability maps and applied on PHFs. This information creates an important basis for better understanding of fracture morphology that could be utilized in future studies for surgical training and implant design.

How Canada can unlock health system capacity with technology: The value of long-term, value-based partnerships with technology providers.

Peter Varga is the Chief Transformation Officer at HealthHub Solutions, Canada's leading provider of bedside patient engagement technology. Leslie Motz is the Executive Vice President of Patient Services and Chief Nursing Executive at Joseph Brant Hospital in Burlington, Ontario. In this article, Peter and Leslie examine Canada's ranking among OECD countries on the performance of its healthcare system and propose how optimizing processes around technology purchase and implementation can maximize the value that it can bring to improving health system performance.

Genetic variants of interleukin 1B and 6 are associated with clinical outcome of surgically treated lumbar degenerative disc disease.

BACKGROUND: Successfully surgically treating degenerative disc diseases can be challenging to the spine surgeons, the long-term outcome relies on both the physical and mental status of the patient before and after treatment. Numerous studies underlined the role of inflammatory cytokines - like interleukin 1B and 6 - in the development of chronic diseases such as failed back surgery syndrome (FBSS) and major depressive disorder (MDD) which alter the outcome after spinal surgery. Our aim was to evaluate the associations of IL6 and IL1B gene polymorphisms with the long-term outcome of degenerative lumbar spine surgeries. METHODS: An international genetical database (GENODISC) was combined with our institute's clinical database to create a large pool with long term follow up data. Altogether 431 patient's data were analysed. Patient reported outcome measures and surgical outcome was investigated in association with IL1B and IL6 SNPs with the help of 'SNPassoc' R genome wide association package. RESULTS: Interleukin 1B variants analysis confirmed association with improvement of pain after surgery on individual SNP level and on haplotype level, moreover relationship with patient reported outcome and preoperative level of depression was found on individual SNP level. IL6 variants were associated with preoperative depression, somatization and with subsequent surgery. CONCLUSION: Understanding the complexity of spinal surgery patients' long-term well-being is crucial in effectively treating chronic debilitating somatic diseases and the associated mental illnesses. Further studies should investigate more comprehensively the linkage of chronic physical and mental illnesses focusing on their simultaneous treatment.

Volar versus combined dorsal and volar plate fixation of complex intraarticular distal radius fractures with small dorsoulnar fragment - a biomechanical study.

Complex intraarticular distal radius fractures (DRFs), commonly managed with volar locking plates, are challenging. Combined volar and dorsal plating is frequently applied for treatment, however, biomechanical investigations are scant. The aim of this biomechanical study was to investigate volar plating versus double plating in DRFs with different degrees of lunate facet comminution.Thirty artificial radii with simulated AO/OTA 23-C2.1 and C3.1 DRFs, including dorsal defect and lunate facet comminution, were assigned to 3 groups: Group 1 with two equally-sized lunate facet fragments; Group 2 with small dorsal and large volar fragment; Group 3 with three equally-sized fragments. The specimens underwent volar and double locked plating and non-destructive ramped loading in 0° neutral position, 40° flexion and 40° extension.In each tested position, stiffness: (1) did not significantly differ among groups with same fixation method (p ≥ 0.15); (2) increased significantly after supplemental dorsal plating in Group 2 and Group 3 (p ≤ 0.02).Interfragmentary displacements between styloid process and lunate facet in neutral position were below 0.5 mm, being not significantly different among groups and plating techniques (p ≥ 0.63).Following volar plating, angular displacement of the lunate facet to radius shaft was significantly lower in Group 1 versus both Group 2 and Group 3 (p < 0.01). It decreased significantly after supplemental dorsal plating in Group 2 and Group 3 (p < 0.01), but not in Group 1 (p ≥ 0.13), and did not differ significantly among the three groups after double plating (p ≥ 0.74).Comminution of the lunate facet within its dorsal third significantly affected the biomechanical outcomes related to complex intraarticular DRFs treated with volar and double locked plates.Double plating demonstrates superior stability versus volar plating only for lunate facet comminution within its dorsal third. In contrast, volar plating could achieve stability comparable with double plating when the dorsal third of the lunate facet is not separated by the fracture pattern. Both fixation methods indicated achievable absolute stability between the articular fragments.

One size may not fit all: patient-specific computational optimization of locking plates for improved proximal humerus fracture fixation.

BACKGROUND: Optimal treatment options for proximal humerus fractures (PHFs) are still debated because of persisting high fixation failure rates experienced with locking plates. Optimization of the implants and development of patient-specific designs may help improve the primary fixation stability of PHFs and reduce the rate of mechanical failures. Optimizing the screw orientations in locking plates has shown promising results; however, the potential benefit of subject-specific designs has not been explored yet. The purpose of this study was to evaluate by means of finite element (FE) analyses whether subject-specific optimization of the screw orientations in a fixed-angle locking plate can reduce the predicted cutout failure risk in unstable 3-part fractures. METHODS: FE models of 19 low-density proximal humeri were generated from high-resolution computed tomographic images using a previously developed and validated computational osteosynthesis framework. The specimens were virtually osteotomized to simulate unstable malreduced 3-part fractures and fixed with the PHILOS plates using 6 proximal locking screws. The average principal compressive strain in cylindrical bone regions around the screw tips-a biomechanically validated surrogate for the risk of cyclic screw cutout failure-was defined as the main outcome measure. The angles of the 6 proximal locking screws were optimized via parametric analysis for each humerus individually, resulting in subject-specific screw orientations (SSO). The average peri-implant strains of the SSO were statistically compared with the previously reported cohort-specific (CSO) and original PHILOS screw orientations (PSO) for females vs. males. RESULTS: The optimized SSO significantly reduced the peri-screw bone strain vs. CSO (6.8% ± 4.0%, P = .006) and PSO (25.24% ± 7.93%, P < .001), indicating lower cutout risk for subject-specific configurations. The benefits of SSO vs. PSO were significantly higher for women than men. CONCLUSION: The findings of this study suggest that subject-specific optimization of the locking screw orientations could lead to lower cutout risk and improved PHF fixation. These computer simulation results require biomechanical and clinical corroboration. Further studies are needed to evaluate whether the potential benefit in stability could justify the increased efforts related to implementation of individualized implants. Nevertheless, computational exploration of the biomechanical factors influencing the outcome of fracture fixations could help better understand the fixation failures and reduce their incidence.

Artificial Intelligence Accurately Detects Traumatic Thoracolumbar Fractures on Sagittal Radiographs.

Background and Objectives: Commonly being the first step in trauma routine imaging, up to 67% fractures are missed on plain radiographs of the thoracolumbar (TL) spine. The aim of this study was to develop a deep learning model that detects traumatic fractures on sagittal radiographs of the TL spine. Identifying vertebral fractures in simple radiographic projections would have a significant clinical and financial impact, especially for low- and middle-income countries where computed tomography (CT) and magnetic resonance imaging (MRI) are not readily available and could help select patients that need second level imaging, thus improving the cost-effectiveness. Materials and Methods: Imaging studies (radiographs, CT, and/or MRI) of 151 patients were used. An expert group of three spinal surgeons reviewed all available images to confirm presence and type of fractures. In total, 630 single vertebra images were extracted from the sagittal radiographs of the 151 patients-302 exhibiting a vertebral body fracture, and 328 exhibiting no fracture. Following augmentation, these single vertebra images were used to train, validate, and comparatively test two deep learning convolutional neural network models, namely ResNet18 and VGG16. A heatmap analysis was then conducted to better understand the predictions of each model. Results: ResNet18 demonstrated a better performance, achieving higher sensitivity (91%), specificity (89%), and accuracy (88%) compared to VGG16 (90%, 83%, 86%). In 81% of the cases, the "warm zone" in the heatmaps correlated with the findings, suggestive of fracture within the vertebral body seen in the imaging studies. Vertebras T12 to L2 were the most frequently involved, accounting for 48% of the fractures. A4, A3, and A1 were the most frequent fracture types according to the AO Spine Classification. Conclusions: ResNet18 could accurately identify the traumatic vertebral fractures on the TL sagittal radiographs. In most cases, the model based its prediction on the same areas that human expert classifiers used to determine the presence of a fracture.

A Novel Technique for Treatment of Metaphyseal Voids in Proximal Humerus Fractures in Elderly Patients.

Background and Objectives: The treatment of proximal humerus fractures in elderly patients is challenging, with reported high complication rates mostly related to implant failure involving screw cut-out and penetration. Metaphyseal defects are common in osteoporotic bone and weaken the osteosynthesis construct. A novel technique for augmentation with polymethylmethacrylate (PMMA) bone cement was developed for the treatment of patients in advanced age with complex proximal humerus fractures and metaphyseal voids, whereby the cement was allowed to partially cure for 5-7 min after mixing to achieve medium viscosity, and then it was manually placed into the defect through the traumatic lateral window with a volume of 4-6 mL per patient. The aim of this retrospective clinical study was to assess this technique versus autologous bone graft augmentation and no augmentation. Materials and Methods: The outcomes of 120 patients with plated Neer three- and four-part fractures, assigned to groups of 63 cases with no augmentation, 28 with bone graft augmentation and 29 with cement augmentation, were assessed in this study. DASH, CS, pain scores and range of motion were analyzed at 3, 6 and 12 months. Statistical analysis was performed with factors for treatment and age groups, Neer fracture types and follow-up periods, and with the consideration of age as a covariate. Results: DASH and CS improved following cement augmentation at three and six months compared to bone grafting, being significant when correcting for age as a covariate (p ≤ 0.007). While the age group had a significant effect on both these scores with worsened values at a higher age for non-augmented and grafted patients (p ≤ 0.044), this was not the case for cement augmented patients (p ≥ 0.128). Cement augmentation demonstrated good clinical results at 12 months with a mean DASH of 10.21 and mean CS percentage of 84.83% versus the contralateral side, not being significantly different among the techniques (p ≥ 0.372), despite the cement augmented group representing the older population with more four-part fractures. There were no concerning adverse events specifically related to the novel technique. Conclusions: This study has detailed a novel technique for the treatment of metaphyseal defects with PMMA cement augmentation in elderly patients with complex proximal humerus fractures and follow-up to one year, whereby the cement was allowed to partially cure to achieve medium viscosity, and then it was manually placed into the defect through the traumatic lateral window. The results demonstrate clinically equivalent short-term results to 6 months compared to augmentation with bone graft or no augmentation-despite the patient group being older and with a higher rate of more severe fracture patterns. The technique appears to be safe with no specifically related adverse events and can be added in the surgeon's armamentarium for the treatment of these difficult to manage fractures.

High-Resolution Cone-Beam Computed Tomography is a Fast and Promising Technique to Quantify Bone Microstructure and Mechanics of the Distal Radius.

Obtaining high-resolution scans of bones and joints for clinical applications is challenging. HR-pQCT is considered the best technology to acquire high-resolution images of the peripheral skeleton in vivo, but a breakthrough for widespread clinical applications is still lacking. Recently, we showed on trapezia that CBCT is a promising alternative providing a larger FOV at a shorter scanning time. The goals of this study were to evaluate the accuracy of CBCT in quantifying trabecular bone microstructural and predicted mechanical parameters of the distal radius, the most often investigated skeletal site with HR-pQCT, and to compare it with HR-pQCT. Nineteen radii were scanned with four scanners: (1) HR-pQCT (XtremeCT, Scanco Medical AG, @ (voxel size) 82 µm), (2) HR-pQCT (XtremeCT-II, Scanco, @60.7 µm), (3) CBCT (NewTom 5G, Cefla, @75 µm) reconstructed and segmented using in-house developed software and (4) microCT (VivaCT40, Scanco, @19 µm-gold standard). The following parameters were evaluated: predicted stiffness, strength, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The overall accuracy of CBCT with in-house optimized algorithms in quantifying bone microstructural parameters was comparable (R2 = 0.79) to XtremeCT (R2 = 0.76) and slightly worse than XtremeCT-II (R2 = 0.86) which were both processed with the standard manufacturer's technique. CBCT had higher accuracy for BV/TV and Tb.Th but lower for Tb.Sp and Tb.N compared to XtremeCT. Regarding the mechanical parameters, all scanners had high accuracy (R2 [Formula: see text] 0.96). While HR-pQCT is optimized for research, the fast scanning time and good accuracy renders CBCT a promising technique for high-resolution clinical scanning.

Finite Element Analysis of Fracture Fixation.

PURPOSE OF REVIEW: Fracture fixation aims to provide stability and promote healing, but remains challenging in unstable and osteoporotic fractures with increased risk of construct failure and nonunion. The first part of this article reviews the clinical motivation behind finite element analysis of fracture fixation, its strengths and weaknesses, how models are developed and validated, and how outputs are typically interpreted. The second part reviews recent modeling studies of the femur and proximal humerus, areas with particular relevance to fragility fractures. RECENT FINDINGS: There is some consensus in the literature around how certain modeling aspects are pragmatically formulated, including bone and implant geometries, meshing, material properties, interactions, and loads and boundary conditions. Studies most often focus on predicted implant stress, bone strain surrounding screws, or interfragmentary displacements. However, most models are not rigorously validated. With refined modeling methods, improved validation efforts, and large-scale systematic analyses, finite element analysis is poised to advance the understanding of fracture fixation failure, enable optimization of implant designs, and improve surgical guidance.

miRNA Profiling of Hungarian Regressive Wilms' Tumor Formalin-Fixed Paraffin-Embedded (FFPE) Samples by Quantitative Real-Time Polymerase Chain Reaction (RT-PCR).

BACKGROUND Wilms' tumor is a common renal malignancy of early childhood with a generally favorable prognosis depending upon histological subtype. It is becoming increasingly clear that differences in miRNA (microRNA) expression signature represent important clues helping us predict a tumor's response to chemotherapy. In our study, we aimed to reveal miRNAs deregulated in regressive Wilms' tumors from FFPE (formalin-fixed, paraffin-embedded) samples, also showing whether such samples are reliable miRNA sources in Wilms' tumor. MATERIAL AND METHODS Samples from 8 Hungarian patients (3 males, 5 females, aged 1 to 7 years) were analyzed by qRT-PCR (quantitative real-time PCR). A PCR array was used in a pilot experiment, and selected miRNAs (miR-128-3p, miR-184, miR-194-5p, miR-203a) were studied in the rest of the samples using individual primers. RESULTS miR-194-5p was underexpressed in all tumor samples. miR-184 and miR-203a were underexpressed in 7 cases, the exception being a case with a high ratio of necrotic blastemal tissue. Results obtained with miR-128-3p are difficult to interpret due to varying directions of expression changes. CONCLUSIONS We conclude that a downregulation of miR-184, miR-194-5p, and miR-203a expression is observed in both regressive and blastemal tumors, but larger-scale studies are needed to confirm whether the degree of their underexpression correlates with the number of blastemal elements in a sample. In most of our FFPE samples aged up to 9 years, RNA extraction provided miRNA with quantity and quality sufficient for qRT-PCR-based analysis, emphasizing the relevance of pathological archives as miRNA sources in future studies.

Effectivity of near-peer teaching in training of basic surgical skills - a randomized controlled trial.

BACKGROUND: Near-peer teaching (NPT) is a special way of teaching where the tutor is one or more academic years ahead of the person being tutored. The literature agrees on the benefits of the method, but there are only a few publications examining its effectiveness using objective methods. The aim of our study was to examine the effectiveness of NPT in the training of basic surgical skills. METHODS: We included 60 volunteer students who participated in a 20 × 45 min long surgical skills course. Based on the results of a pre-course test, we randomly divided the students into six equal groups. All groups completed the same curriculum, with three groups being assisted by a NPT tutor. After the course, they completed the same test as at the beginning. The exams were recorded on anonymized videos and were blindly evaluated. The students' satisfaction was monitored using a self-administered online anonymous questionnaire. Statistical analysis was performed using the Mann-Whitney and Wilcoxon tests. RESULTS: Overall, student performance improved with completion of the course (from 119.86 to 153.55 points, p <  0.01). In groups where a NPT tutor assisted, students achieved a significantly better score (37.20 vs. 30.18 points improvement, p = 0.036). The difference was prominent in surgical knotting tasks (14.73 vs. 9.30 points improvement, p <  0.01). In cases of suturing (15.90 vs. 15.46 points) and laparoscopy (7.00 vs. 4.98 points), the presence of the NPT tutor did not significantly affect development. Based on student feedback, although students positively assessed the presence of NPT, it did not significantly improve students' overall satisfaction since it was already 4,82 on a scale of 5 in the control group. CONCLUSIONS: Overall, involving a NPT tutor had a positive impact on student development. An outstanding difference was observed in connection with knotting techniques.