A combined approach for the calculation of activation yields and the characterization of materials for a medical cyclotron.

Cyclotrons for the production of radiopharmaceuticals have become important tools in modern nuclear medicine. At the end of their lifecycles, such installations have to be dismantled and any activated materials must be treated according to the local radiation protection legislation. Using a simulation model, we have developed a non-destructive approach for the radiological characterization of components inside and around an IBA Cyclone 18/9 cyclotron. The methodology is based on software tools developed at CERN (FLUKA Monte Carlo code, ActiWiz and RAW). The simulation results were compared to measurements made using reference samples placed around the cyclotron inside the bunker. Results show a reasonable agreement between simulation and measurements of about a factor of two for a set of 27 reference samples and 11 radionuclides of interest. The origin of this factor has been thoroughly evaluated and opened the door to further investigations leading to possible avenues for improvement.

SOLIDUSS: Solid-state diffusion software for radiation protection.

The out-diffusion of radionuclides from activated material in case of a fire may represent a non-negligible contribution to the radiological source term of such an event. In order to assess the contribution of this phenomenon, a software package has been designed and implemented. In the present document we briefly introduce the numerical treatment used to tackle the problem prior to the explanation of the software's logic. The document ends with an exemplary simulation and a study carried out to validate the implementation of the algorithm. The presented tool has been named SOLIDUSS, it is mainly written in C++ and uses a Monte Carlo based approach to simulate the diffusion of radioisotopes within solid materials. It is designed to run coupled with CERN-FLUKA, taking advantage of its geometry kernel to carry out diffusion calculations in arbitrarily complex geometries. The user can provide 3D temperature maps along with many other parameters that allow the program to target a wide range of different scenarios. As results SOLIDUSS provides 3D radionuclide concentration maps as well as the amount of radionuclides out-diffused from the selected materials. So far, this software has undergone numerical validation which will be discussed in this paper. Benchmarking against experimental data is currently ongoing.

Detailed study of the distribution of activation inside the magnet coils of a compact PET cyclotron.

We determined the distribution of activation products inside the magnet coils of a medical cyclotron that has been operational for fifteen years. Besides FLUKA, we based our approach on new software tools (RAW and ActiWiz) developed for high-energy accelerators at CERN. A combined analysis of measurements on the coils with Monte-Carlo simulations resulted in a detailed three-dimensional radiological characterisation of the coils. Our results provide the required information for the radiation protection expert to identify the appropriate waste elimination scheme.

Response of alanine and radio-photo-luminescence dosemeters to mixed high-energy radiation fields.

Alanine and Radio-Photo-Luminescence (RPL) dosemeters are passive dosemeters used to monitor absorbed dose in all kind of radiation fields. However, up to now both dosemeter types are calibrated to photon sources only. In order to study the response of RPL and alanine dosemeters to mixed high-energy particle fields like those occurring at CERN's accelerators, an irradiation campaign at the CERN-EC High-Energy Reference field Facility (CERF-field) was performed. In this facility a copper target is irradiated by hadrons with a momentum of 120 GeV/c. Dosemeters were exposed to various mixed radiation fields by placing them at various positions on the surface of the target. In addition to the experiment FLUKA Monte Carlo simulations were carried out, which provide information concerning the energy deposition at the dosemeter locations. This paper compares the measurements with the simulation results and discusses the radiation field compositions present at the various dosemeter positions on the target.

The influence of the type of filling gas on the response of ionisation chambers to a mixed high-energy radiation field.

Radiation protection dosimetry in radiation fields behind the shielding of high-energy accelerators such as CERN is a challenging task and the quantitative understanding of the detector response used for dosimetry is essential. Measurements with ionisation chambers are a standard method to determine absorbed dose (in the detector material). For applications in mixed radiation fields, ionisation chambers are often also calibrated in terms of ambient dose equivalent at conventional reference radiation fields. The response of a given ionisation chamber to the various particle types of a complex high-energy radiation field in terms of ambient dose equivalent depends of course on the materials used for the construction and the chamber gas used. This paper will present results of computational studies simulating the exposure of high-pressure ionisation chambers filled with different types of gases to the radiation field at CERN's CERN-EU high-energy reference field facility. At this facility complex high-energy radiation fields, similar to those produced by cosmic rays at flight altitudes, are produced. The particle fluence and spectra calculated with FLUKA Monte Carlo simulations have been benchmarked in several measurements. The results can be used to optimise the response of ionisation chambers for the measurement of ambient dose equivalent in high-energy mixed radiation fields.

Field calibration studies for ionisation chambers in mixed high-energy radiation fields.

The monitoring of ambient doses at work places around high-energy accelerators is a challenging task due the complexity of the mixed stray radiation fields encountered. At CERN, mainly Centronics IG5 high-pressure ionisation chambers are used to monitor radiation exposure in mixed fields. The monitors are calibrated in the operational quantity ambient dose equivalent H*(10) using standard, source-generated photon- and neutron fields. However, the relationship between ionisation chamber reading and ambient dose equivalent in a mixed high-energy radiation field can only be assessed if the spectral response to every component and the field composition is known. Therefore, comprehensive studies were performed at the CERN-EU high-energy reference field facility where the spectral fluence for each particle type has been assessed with Monte Carlo simulations. Moreover, studies have been performed in an accessible controlled radiation area in the vicinity of a beam loss point of CERN's proton synchrotron. The comparison of measurements and calculations has shown reasonable agreement for most exposure conditions. The results indicate that conventionally calibrated ionisation chambers can give satisfactory response in terms of ambient dose equivalent in stray radiation fields at high-energy accelerators in many cases. These studies are one step towards establishing a method of 'field calibration' of radiation protection instruments in which Monte Carlo simulations will be used to establish a correct correlation between the response of specific detectors to a given high-energy radiation field.

Response of neutron detectors to high-energy mixed radiation fields.

Radiation protection around CERN's high-energy accelerators represents a major challenge due to the presence of complex, mixed radiation fields. Behind thick shielding neutrons dominate and their energy ranges from fractions of eV to about 1 GeV. In this work the response of various portable detectors sensitive to neutrons was studied at CERN's High-Energy Reference Field Facility (CERF). The measurements were carried out with conventional rem counters, which usually cover neutron energies up to 20 MeV, the Thermo WENDI-2, which is specified to measure neutrons up to several GeV, and a tissue-equivalent proportional counter. The experimentally determined neutron dose equivalent results were compared with Monte Carlo (MC) simulations. Based on these studies field calibration factors can be determined, which result in a more reliable estimate of H*(10) in an unknown, but presumably similar high-energy field around an accelerator than a calibration factor determined in a radiation field of a reference neutron source.

Characterisation of ionisation chambers for a mixed radiation field and investigation of their suitability as radiation monitors for the LHC.

Monitoring of the radiation environment is one of the key tasks in operating a high-energy accelerator such as the Large Hadron Collider (LHC). The radiation fields consist of neutrons, charged hadrons as well as photons and electrons with energy spectra extending from those of thermal neutrons up to several hundreds of GeV. The requirements for measuring the dose equivalent in such a field are different from standard uses and it is thus necessary to investigate the response of monitoring devices thoroughly before the implementation of a monitoring system can be conducted. For the LHC, it is currently foreseen to install argon- and hydrogen-filled high-pressure ionisation chambers as radiation monitors of mixed fields. So far their response to these fields was poorly understood and, therefore, further investigation was necessary to prove that they can serve their function well enough. In this study, ionisation chambers of type IG5 (Centronic Ltd) were characterised by simulating their response functions by means of detailed FLUKA calculations as well as by calibration measurements for photons and neutrons at fixed energies. The latter results were used to obtain a better understanding and validation of the FLUKA simulations. Tests were also conducted at the CERF facility at CERN in order to compare the results with simulations of the response in a mixed radiation field. It is demonstrated that these detectors can be characterised sufficiently enough to serve their function as radiation monitors for the LHC.

Calculations of neutron and photon source terms and attenuation profiles for the generic design of the SPEAR3 storage ring shield.

The FLUKA Monte Carlo particle generation and transport code was used to calculate shielding requirements for the 3 GeV, 500 mA SPEAR3 storage ring at the Stanford Synchrotron Radiation Laboratory. The photon and neutron dose equivalent source term data were simulated for a 3 GeV electron beam interacting with two typical target/shielding geometries in the ring. The targets simulated are a rectangular block of 0.7 cm thick copper and a 5 cm thick iron block, both tilted at 1 degree relative to the beam direction. Attenuation profiles for neutrons and photons in concrete and lead as a function of angle at different shield thicknesses were calculated. The first, second and equilibrium attenuation lengths of photons and neutrons in the shield materials are derived from the attenuation profiles. The source term data and the attenuation lengths were then used to evaluate the shielding requirements for the ratchet walls of all front-ends of the SPEAR3 storage ring.

Benchmark studies of induced radioactivity produced in LHC materials, Part I: Specific activities.

Samples of materials which will be used in the LHC machine for shielding and construction components were irradiated in the stray radiation field of the CERN-EU high-energy reference field facility. After irradiation, the specific activities induced in the various samples were analysed with a high-precision gamma spectrometer at various cooling times, allowing identification of isotopes with a wide range of half-lives. Furthermore, the irradiation experiment was simulated in detail with the FLUKA Monte Carlo code. A comparison of measured and calculated specific activities shows good agreement, supporting the use of FLUKA for estimating the level of induced activity in the LHC.

Benchmark studies of induced radioactivity produced in LHC materials, Part II: Remanent dose rates.

A new method to estimate remanent dose rates, to be used with the Monte Carlo code FLUKA, was benchmarked against measurements from an experiment that was performed at the CERN-EU high-energy reference field facility. An extensive collection of samples of different materials were placed downstream of, and laterally to, a copper target, intercepting a positively charged mixed hadron beam with a momentum of 120 GeV c(-1). Emphasis was put on the reduction of uncertainties by taking measures such as careful monitoring of the irradiation parameters, using different instruments to measure dose rates, adopting detailed elemental analyses of the irradiated materials and making detailed simulations of the irradiation experiment. The measured and calculated dose rates are in good agreement.

High-energy quasi-monoenergetic neutron fields: existing facilities and future needs.

The argument that well-characterised quasi-monoenergetic neutron (QMN) sources reaching into the energy domain >20 MeV are needed is presented. A brief overview of the existing facilities is given, and a list of key factors that an ideal QMN source for dosimetry and spectrometry should offer is presented. The authors conclude that all of the six QMN facilities currently in existence worldwide operate in sub-optimal conditions for dosimetry. The only currently available QMN facility in Europe capable of operating at energies >40 MeV, TSL in Uppsala, Sweden, is threatened with shutdown in the immediate future. One facility, NFS at GANIL, France, is currently under construction. NFS could deliver QMN beams up to about 30 MeV. It is, however, so far not clear if and when NFS will be able to offer QMN beams or operate with only so-called white neutron beams. It is likely that by 2016, QMN beams with energies >40 MeV will be available only in South Africa and Japan, with none in Europe.