Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact.

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Natural marsh-pasture/sugarcane field transitions greatly reduced lignin-derived pyrolysis products of soil organic matter.

Cultivation of marshes (Ma) to arable like pasture (Pa) and sugarcane (Sa) usually causes soil organic carbon (SOC) pool depletion within a short time. However, there are some uncertainties about which molecular composition of soil organic matter (SOM) is sensitive to land use change (LUC). In the present work, molecular components of SOM were investigated and compared to better understand the impacts of LUC on the carbon cycle from Ma to Pa or Sa in Louisiana and Florida. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) analysis indicated that LUC greatly altered the molecular composition of SOM. More lignin, polysaccharide, and phonetic compounds were founded from Ma, and more nitrogen-containing compounds were identified from Sa. Lignin and phenolic compounds had unexpectedly the most decrease from native marsh-sugarcane/pasture transitions, showing the same trend as SOC. This meant that lignin and phenol were not as stable as expected when undergoing LUC. LUC significantly yield more molecular moieties and then resulted in higher complexities and diversities of molecular components in Pa or Sa than those in Ma. Principal component analysis implied higher contributions of old carbon to SOM in Ma, and fresh biomass input contributed more SOM in Sa. Our results implied that human activities such as LUC could not only alter carbon fluxes but also simultaneously change molecular mechanisms that drive the carbon cycle.

Effects of biochar and N-stabilizers on greenhouse gas emissions from a subtropical pasture field applied with organic and inorganic nitrogen fertilizers.

Pasturelands contribute significantly to the global CO2, CH4 and N2O emissions. These gas emissions are influenced by the amount and type of N-fertilizers applied and local climate. Recent studies showed potential of biochar and N-stabilizer compounds in minimizing CO2, CH4 and N2O emissions by regulating N-release from N-fertilizers. The present study was aimed at determining and comparing the effects of biochar and N-(n-butyl) thiophosphoric triamide + dicyandiamide (N-stabilizer) on CO2, N2O and CH4 emissions from a pasture fertilized with cattle manure or urea. The study was conducted during 2015 and 2016 in an established bermudagrass (Cynodon dactylon L. Pers.). Treatments consisted of combination of N-sources (manure, and urea) and two mitigation technologies [pine hardwood biochar (BC) and N-stabilizer] along with control. Emissions of GHGs were measured from each plot using static chamber systems. Both BC and N-stabilizer applications with manure applied to the hay field significantly decreased N2O emissions by 42% and 45%, respectively, in the year-2, and emission factors compared to manure only treatment. Addition of N-stabilizer to urea had significantly decreased N2O emissions compared to urea alone, while BC had statistically insignificant effect although numerically lowered N2O emissions in both the years. Application of manure to the soil resulted in significantly higher CO2 emissions in both years and CH4 emissions in 2016 compared to unfertilized soil. Urea application had significant effect on CO2 emissions in 2016, while no effect on CH4 emissions compared to control. Application of either biochar or N-stabilizer did not significantly affect CO2 and CH4 emissions.

Removal of potentially toxic metal by biochar derived from rendered solid residue with high content of protein and bone tissue.

The purpose of this study was to produce rendering animal carcass residue char (RACR-C) by pyrolyzing the solid residues of low-recyclable rendered pig carcasses and to evaluate their cadmium (Cd) adsorption characteristics and mechanisms. As the pyrolysis temperature increased, the inorganic content of RACR-C increased, while the carbon content decreased. In particular, the surface structure and chemistry of RACR-Cs prepared at different pyrolysis temperatures were well described by SEM-EDS, XRD, XRF, TGA, and FTIR. The Cd adsorption characteristics of RACR-C were in good agreement with the Langmuir isotherm and pseudo-second-order models, and the Cd adsorption capacities of RACR-Cs prepared at various pyrolysis temperatures were in the order of RACR-C500 (73.5 mg/g)> RACR-C600 (53.8 mg/g)> RACR-C400 (41.5 mg/g) " RACR-C250 (15.9 mg/g). The intraparticle diffusion model suggested that the adsorption of Cd by RACR-C is greatly influenced by internal diffusion as well as external boundary. Since the Cd adsorption capacity of RACR-C is greatly influenced by the initial dosage, pH, and co-existing metals, it is necessary to manage these influencing factors when treating wastewater containing heavy metals. Our results suggest that Cd adsorption by RACR-C is a complex adsorption phenomenon by various mechanisms such as adsorption by functional group (CË­C and C-O), precipitation of Cd-P and ion exchange reaction by exchangeable cation occurring rather than by a single specific mechanism.

Lead sorption characteristics of various chicken bone part-derived chars.

Recycling food waste for beneficial use is becoming increasingly important in resource-limited economy. In this study, waste chicken bones of different parts from restaurant industry were pyrolyzed at 600 °C and evaluated for char physicochemical properties and Pb sorption characteristics. Lead adsorption isotherms by different chicken bone chars were carried out with initial Pb concentration range of 1-1000 mg L-1 at pH 5. The Pb adsorption data were better described by the Langmuir model (R2 = 0.9289-0.9937; ARE = 22.7-29.3%) than the Freundlich model (R2 = 0.8684-0.9544; ARE = 35.4-72.0%). Among the chars derived from different chicken bone parts, the tibia bone char exhibited the highest maximum Pb adsorption capacity of 263 mg g-1 followed by the pelvis (222 mg g-1), ribs (208 mg g-1), clavicle (179 mg g-1), vertebrae (159 mg g-1), and humerus (135 mg g-1). The Pb adsorption capacities were significantly and positively correlated with the surface area, phosphate release amount, and total phosphorus content of chicken bone chars (r ≥ 0.9711). On the other hand, approximately 75-88% of the adsorbed Pb on the chicken bone chars was desorbable with 0.1 M HCl, indicating their recyclability for reuse. Results demonstrated that chicken bone char could be used as an effective adsorbent for Pb removal in wastewater.

Facilitative capture of As(V), Pb(II) and methylene blue from aqueous solutions with MgO hybrid sponge-like carbonaceous composite derived from sugarcane leafy trash.

Enhancing the contaminant adsorption capacity is a key factor affecting utilization of carbon-based adsorbents in wastewater treatment and encouraging development of biomass thermo-disposal. In this study, a novel MgO hybrid sponge-like carbonaceous composite (HSC) derived from sugarcane leafy trash was prepared through an integrated adsorption-pyrolysis method. The resulted HSC composite was characterized and employed as adsorbent for the removal of negatively charged arsenate (As(V)), positively charged Pb(II), and the organic pollutant methylene blue (MB) from aqueous solutions in batch experiments. The effects of solution pH, contact time, initial concentration, temperature, and ionic strength on As(V), Pb(II) and MB adsorption were investigated. HSC was composed of nano-size MgO flakes and nanotube-like carbon sponge. Hybridization significantly improved As(V), Pb(II) and methylene blue (MB) adsorption when compared with the material without hybridization. The maximum As(V), Pb(II) and MB adsorption capacities obtained from Langmuir model were 157 mg/g, 103 mg/g and 297 mg/g, respectively. As(V) adsorption onto HSC was best fit by the pseudo-second-order model, and Pb(II) and MB with the intraparticle diffusion model. Increased temperature and ionic strength decreased Pb(II) and MB adsorption onto HSC more than As(V). Further FT-IR, XRD and XPS analysis demonstrated that the removal of As(V) by HSC was mainly dominated by surface deposition of MgHAsO4 and Mg(H2AsO4)2 crystals on the HSC composite, while carbon π-π* transition and carbon π-electron played key roles in Pb(II) and MB adsorption. The interaction of Pb(II) with carbon matrix carboxylate was also evident. Overall, MgO hybridization improves the preparation of the nanotube-like carbon sponge composite and provides a potential agricultual residue-based adsorbent for As(V), Pb(II) and MB removal.

CMsearch: simultaneous exploration of protein sequence space and structure space improves not only protein homology detection but also protein structure prediction.

MOTIVATION: Protein homology detection, a fundamental problem in computational biology, is an indispensable step toward predicting protein structures and understanding protein functions. Despite the advances in recent decades on sequence alignment, threading and alignment-free methods, protein homology detection remains a challenging open problem. Recently, network methods that try to find transitive paths in the protein structure space demonstrate the importance of incorporating network information of the structure space. Yet, current methods merge the sequence space and the structure space into a single space, and thus introduce inconsistency in combining different sources of information. METHOD: We present a novel network-based protein homology detection method, CMsearch, based on cross-modal learning. Instead of exploring a single network built from the mixture of sequence and structure space information, CMsearch builds two separate networks to represent the sequence space and the structure space. It then learns sequence-structure correlation by simultaneously taking sequence information, structure information, sequence space information and structure space information into consideration. RESULTS: We tested CMsearch on two challenging tasks, protein homology detection and protein structure prediction, by querying all 8332 PDB40 proteins. Our results demonstrate that CMsearch is insensitive to the similarity metrics used to define the sequence and the structure spaces. By using HMM-HMM alignment as the sequence similarity metric, CMsearch clearly outperforms state-of-the-art homology detection methods and the CASP-winning template-based protein structure prediction methods. AVAILABILITY AND IMPLEMENTATION: Our program is freely available for download from http://sfb.kaust.edu.sa/Pages/Software.aspx CONTACT: : xin.gao@kaust.edu.sa SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Soil heavy metal contamination and health risks associated with artisanal gold mining in Tongguan, Shaanxi, China.

Soil contamination with heavy metals due to mining activities poses risks to ecological safety and human well-being. Limited studies have investigated heavy metal pollution due to artisanal mining. The present study focused on soil contamination and the health risk in villages in China with historical artisanal mining activities. Heavy metal levels in soils, tailings, cereal and vegetable crops were analyzed and health risk assessed. Additionally, a botany investigation was conducted to identify potential plants for further phytoremediation. The results showed that soils were highly contaminated by residual tailings and previous mining activities. Hg and Cd were the main pollutants in soils. The Hg and Pb concentrations in grains and some vegetables exceeded tolerance limits. Moreover, heavy metal contents in wheat grains were higher than those in maize grains, and leafy vegetables had high concentrations of metals. Ingestion of local grain-based food was the main sources of Hg, Cd, and Pb intake. Local residents had high chronic risks due to the intake of Hg and Pb, while their carcinogenic risk associated with Cd through inhalation was low. Three plants (Erigeron canadensis L., Digitaria ciliaris (Retz.) Koel., and Solanum nigrum L.) were identified as suitable species for phytoremediation.

Ammonia and greenhouse gas emissions from a subtropical wheat field under different nitrogen fertilization strategies.

Minimizing soil ammonia (NH3) and nitrous oxide (N2O) emission factors (EFs) has significant implications in regional air quality and greenhouse gas (GHG) emissions besides nitrogen (N) nutrient loss. The aim of this study was to investigate the impacts of different N fertilizer treatments of conventional urea, polymer-coated urea, ammonia sulfate, urease inhibitor (NBPT, N-(n-butyl) thiophosphoric triamide)-treated urea, and nitrification inhibitor (DCD, dicyandiamide)-treated urea on emissions of NH3 and GHGs from subtropical wheat cultivation. A field study was established in a Cancienne silt loam soil. During growth season, NH3 emission following N fertilization was characterized using active chamber method whereas GHG emissions of N2O, carbon dioxide (CO2), and methane (CH4) were by passive chamber method. The results showed that coated urea exhibited the largest reduction (49%) in the EF of NH3-N followed by NBPT-treated urea (39%) and DCD-treated urea (24%) over conventional urea, whereas DCD-treated urea had the greatest suppression on N2O-N (87%) followed by coated urea (76%) and NBPT-treated urea (69%). Split fertilization of ammonium sulfate-urea significantly lowered both NH3-N and N2O-N EF values but split urea treatment had no impact over one-time application of urea. Both NBPT and DCD-treated urea treatments lowered CO2-C flux but had no effect on CH4-C flux. Overall, application of coated urea or urea with NPBT or DCD could be used as a mitigation strategy for reducing NH3 and N2O emissions in subtropical wheat production in Southern USA.

Heavy metal distribution and water quality characterization of water bodies in Louisiana's Lake Pontchartrain Basin, USA.

The seasonal variation in physico-chemical properties, anions, and the heavy metal (Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn) concentration was evaluated in water from nine different rivers in Lake Pontchartrain Basin, Louisiana, USA. The water quality parameters were compared with toxicity reference values (TRV), US Environmental Protection Agency (USEPA) drinking/aquatic life protection, and WHO standards. Among physico-chemical properties, pH, DO, and turbidity were high during spring, while, EC, temperature, and DOC were high during summer and vice versa. The anion study revealed that the concentrations of F-, Cl-, and NO3- were higher during summer and Br- and SO4- were higher during spring. Our research findings showed anion concentration decreased in the order of Cl- > SO4- > NO3- > Br- > F-, in accordance with the global mean anion concentration. The dissolved heavy metals (Cd, Co, Cr, Cu, Mn, Ni, Pb) except Zn were higher during spring than summer. None of the rivers showed any Cd pollution for both seasons. Co showed higher concentrations in Amite River, Mississippi River, Industrial Canal, and Lacombe Bayou during summer. The Cr concentration was higher than WHO drinking water standards, implicating water unsuitability for drinking purposes in all the rivers associated with the Lake Pontchartrain Basin. Cu showed no pollution risk for the study area. Mn and Co were similar to concentration in Lacombe Bayou, Liberty Bayou, Blind River, and Industrial Canal. Mn levels were greater than WHO standards for the Tickfaw River, Tangipahoa River, and Blind River in both seasons. Blind River, Tangipahoa River, Tickfaw River, and Amite River will require more monitoring for determining possible Mn pollution. Ni content in river water during both seasons showed low pollution risk. Liberty Bayou and Industrial Canal concentrations were closer to the WHO regulatory standards, indicating possible risk of Pb pollution in these water bodies. The Zn content was near the USEPA aquatic life standards in summer for all water bodies. None of the rivers showed any risk associated with Cd, Co, Cu, and Ni levels but medium to higher risk to aquatic life from Cr and Zn for both seasons for most of the rivers. Metal fractionation revealed the decreasing order of inert > labile > organic. The high inert fraction in the rivers under study reflects the major contribution of natural sources in Lake Pontchartrain Basin. The labile and organic forms of Cd, Cu, Ni, and Zn pose potential higher risk to the aquatic life in the Lake Pontchartrain Basin.

Zinc and cadmium adsorption to aluminum oxide nanoparticles affected by naturally occurring ligands.

Nanoparticles of aluminum oxide (AlO) are efficient in removing Cd, Zn, and other heavy metals from wastewaters and soil solutions due to their high specific surface area and surface area to volume ratio. Naturally occurring ligands, such as phosphate (PO), citrate, and humic acid (HA), may affect the efficiency of AlO nanoparticles in adsorption of Cd and Zn. The objective of this study was to investigate Zn and Cd adsorption to AlO nanoparticles as influenced by PO, citrate, and HA. Adsorption of Zn and Cd was performed in mono-metal and binary-metal systems at pH 6.5 with initial metal concentration of 1.0 mmol L and varying ligand concentration at a solid:solution ratio of 1:1000. Adsorption isotherms showed that Zn had higher affinity to the AlO nanoparticle surface than Cd and that adsorption of Zn and Cd in the binary-metal system was lower than in the respective mono-metal systems. Phosphate and HA enhanced Zn and Cd adsorption in all systems, whereas citrate reduced Zn adsorption in the mono-metal system by 25% and increased adsorption in the other metal systems. Removal of Zn or Cd from the systems was generally accompanied by enhanced removal of PO and HA, which may indicate enhanced adsorption due to ternary complex formation or metal-ligand precipitation. Phosphate was the most effective among the three ligands in enhancing Zn and Cd adsorption. Overall, AlO nanoparticles are suitably used for Zn and Cd adsorption, which can be significantly enhanced by the presence of PO or HA and to a lesser degree by citrate at low concentrations.

Point of care ultrasound and sub-xiphoid window reduce uncertainty in the management of potential dual-cavity injuries in patients with torso stab wounds.

INTRODUCTION: This paper reviews our experiences with the management of patients with torso stab wounds and potential injuries in both the chest and abdomen over the last decade. The aim of the project is to clarify our approach and provide an evidence base for clinical algorithms. We hypothesize that there is room for our clinical algorithms to be further refined in order to address the diverse, life threatening injuries that can result from stab wounds to the torso. METHODS: Patients with one or more torso stab wounds, and a potential injury in both the chest and the abdomen were identified from a local database for the period December 2012 to December 2020. RESULTS: A total of 899 patients were identified. The mean age was 29 years (SD = 9) and 93% of patients were male. Amongst all patients, 686 (76%) underwent plain radiography, 207 (23%) a point of care ultrasound assessment, and 171 (19%) a CT scan. Following initial resuscitation, assessment and investigation, a total of 527 (59%) patients proceeded to surgery. A total of 185 patients (35%) underwent a semi elective diagnostic laparoscopy to exclude an occult diaphragm injury. Of the 342 who underwent an emergency operation, 9 patients (1%) required thoracotomy or sternotomy exclusively, 299 patients (33%) required a laparotomy exclusively and 34 patients (4%) underwent some form of dual cavity exploration. In total, there were 16 deaths, a mortality rate of 2%. The use of laparoscopy, point of care ultrasound and subxiphoid pericardial window increased over the period of this study. CONCLUSIONS: Patients with torso stab wounds and potential injuries above and below the diaphragm are challenging to manage. The highly structured clinical algorithm of the ATLS course should be complemented by the use of point of care ultrasound and sub-xiphoid window to assess the pericardium. These adjuncts reduce the likelihood of negative exploration and incorrect operative sequencing.

The role of extracellular polymeric substances (EPS) in chemical-degradation of persistent organic pollutants in soil: A review.

Persistent organic pollutants (POPs) in soil show high environmental risk due to their high toxicity and low biodegradability. Studies have demonstrated the degradation function of microbial extracellular polymeric substances (EPS) on POPs in various matrices. However, the degradation mechanisms and the factors that influence the process in soil have not been clearly illustrated. In this review, the characteristics of EPS were introduced and the possible mechanisms of EPS on degradation of organic pollutants (e.g., external electron transfer, photodegradation, and enzyme catalysis) were comprehensively discussed. In addition, the environmental conditions (e.g., UV, nutrients, and redox potential) that could influence the production and degradation-related active components of EPS were addressed. Moreover, the current approaches on the application of EPS in biotechnology were summarized. Further, the future perspectives of enhancement on degradation of POPs by regulating EPS were discussed. Overall, this review could provide a new thought on remediation of POPs by widely-existing EPS in soil with low-cost and minimized eco-disturbance.

Management of thoracoabdominal gunshot wounds - Experience from a major trauma centre in South Africa.

INTRODUCTION: The management of thoracoabdominal (TA) gunshot wounds (GSW) remains challenging. This study reviewed our experience with treating such injuries over a decade. MATERIALS AND METHODS: A retrospective study was conducted at a major trauma centre in South Africa over a ten-year period from December 2012 to January 2022. RESULTS: Two hundred sixteen cases were included (male: 85 %, mean age: 33 years). Median RTS: 8 and median ISS: 17 (IQR: 10-19). The mean value of physiological parameters: Heart Rate (HR): 98/min, Systolic Blood Pressure (SBP): 119 mmHg, Temperature (T): 36.2 °C, pH: 7.35, Lactate 3.7 mmol/l. Ninety-nine (46 %) underwent a CT scan of the torso. One hundred fifty-four cases (69 %) were managed operatively: thoracotomy only [5/154 (3 %)], laparotomy only [143/154 (93 %)], and combined thoracotomy and laparotomy [6/154 (4 %)]. Those who had surgery following preoperative CT had a lower rate of dual cavity exploration (2 % vs 4 %, p = 0.51), although it did not reach statistical significance. The overall morbidity was 30 % (69). 82 % required intensive care (ICU) admission. The mean length of hospital stay was 14 days. The overall mortality was 13 % (28). Over the 10-year study period, there was a steady increase in the number of cases of TA GSWs managed at our institution. Over the study period, an increasing use of CT was noted, along with a steady reduction in the proportion of operations performed. CONCLUSIONS: Thoraco-abdominal GSWs remain challenging to manage and continue to be associated with significant morbidity and mortality. The increased use of CT scans has reduced the degree of clinical confusion around which body cavity to prioritize, leading to an apparent decrease in dual cavity exploration, and has allowed for the increased use of minimalistic and non-operative approaches.

Quality Tolerance Limits: A General Guidance for Parameter Selection and Threshold Setting.

The past years have sharpened the industry's understanding of a Quality by Design (QbD) approach toward clinical trials. Using QbD encourages designing quality into a trial during the planning phase. The identification of Critical to Quality (CtQs) factors and specifically Critical Data and Processes (CD&Ps) is key to such a risk-based monitoring approach. A variable that allows monitoring the evolution of risk regarding the CD&Ps is called a Quality Tolerance Limit (QTL) parameter. These parameters are linked to the scientific question(s) of a trial and may identify the issues that can jeopardize the integrity of trial endpoints. This paper focuses on defining what QTL parameters are and providing general guidance on setting thresholds for these parameters allowing for the derivation of an acceptable range of the risk.

Non-negative matrix factorization by maximizing correntropy for cancer clustering.

BACKGROUND: Non-negative matrix factorization (NMF) has been shown to be a powerful tool for clustering gene expression data, which are widely used to classify cancers. NMF aims to find two non-negative matrices whose product closely approximates the original matrix. Traditional NMF methods minimize either the l2 norm or the Kullback-Leibler distance between the product of the two matrices and the original matrix. Correntropy was recently shown to be an effective similarity measurement due to its stability to outliers or noise. RESULTS: We propose a maximum correntropy criterion (MCC)-based NMF method (NMF-MCC) for gene expression data-based cancer clustering. Instead of minimizing the l2 norm or the Kullback-Leibler distance, NMF-MCC maximizes the correntropy between the product of the two matrices and the original matrix. The optimization problem can be solved by an expectation conditional maximization algorithm. CONCLUSIONS: Extensive experiments on six cancer benchmark sets demonstrate that the proposed method is significantly more accurate than the state-of-the-art methods in cancer clustering.

Synthesis and structure-activity relationships of novel indazolyl glucocorticoid receptor partial agonists.

SAR was used to further develop an indazole class of non-steroidal glucocorticoid receptor agonists aided by a GR LBD (ligand-binding domain)-agonist co-crystal structure described in the accompanying paper. Progress towards discovering a dissociated GR agonist guided by human in vitro assays biased the optimization of this compound series towards partial agonists that possessed excellent selectivity against other nuclear hormone receptors.

Effect of infliximab on health-related quality of life and disease activity by body region in patients with moderate-to-severe psoriasis and inadequate response to etanercept: results from the PSUNRISE trial.

BACKGROUND: Treatment with tumor necrosis factor (TNF)-α antagonists is effective in patients with moderate-to-severe plaque psoriasis, including those with impaired health-related quality of life (HRQoL). METHODS: PSUNRISE is a multicenter, open-label, prospective study evaluating the efficacy and safety of switching from etanercept to infliximab in psoriasis patients with an inadequate response to etanercept. Patients received intravenous infusions of infliximab 5 mg/ kg at weeks 0, 2, 6, 14, and 22. HRQoL was assessed using the Dermatology Life Quality Index (DLQI), the 36-item Short-Form Health Survey (SF-36), and the EuroQoL (EQ-5D) index and EQ-5D visual analog scale (VAS; 0-100 cm) among patients receiving at least one infliximab infusion. Subgroup analyses (t- test) were performed to compare mean DLQI improvement between patients who achieved and did not achieve clinical response (Physician's Global Assessment [PGA] 0/1 and at least a 75% improvement in the Psoriasis Area and Severity Index [PASI 75]) at weeks 10 and 26. RESULTS: A total of 215 patients received at least one infliximab infusion. A DLQI score of 0 or 1 (no negative effect on HRQoL) was achieved by 3.7%, 44.2%, and 41.4% of patients at weeks 0, 10 and 26, respectively. Mean changes in SF-36 Physical Component Summary scores were 1.8 (week 10) and 2.4 (week 26); corresponding changes in Mental Component Summary scores were 4.5 and 5.0. The mean change in EQ-5D index score was 0.08 at week 10 and 0.09 at week 26; respective mean changes in EQ-5D VAS score were 7.73 and 9.49. Mean improvements in DLQI were significantly higher for patients achieving versus those not achieving PGA 0/1 (P=0.0193 [week 10] and P=0.0010 [week 26]) and PASI 75 response (P<0.0001 [week 10]; P=0.0012 [week 26]). CONCLUSION: Psoriasis patients with prior inadequate response to etanercept demonstrated sustained improvements in HRQoL after switching to infliximab, and HRQoL improvements were associated with clinical responses.

Tea-based biochar-mediated changes in cation diffusion homeostasis in rice grown in heavy metal (loid) contaminated mining soil.

Foreseeable future scenarios highlight the urgency of applying eco-safe avoidance methods or tolerance to heavy metal(loid) (HM) stress in agricultural production areas of contamination. The analyses show that the Ni, Mn, As, and Cr concentrations detected in the soils of the paddy fields in the Black Sea region vary between 123.60 and 263.30; 687-1271; 8.90-14.50; 162.00-340.00 mg kg-1 proving high accumulation of Ni, Mn, As, Cr in rice. Overconsumption of rice farmed extensively on these soils might also lead to human HM-related health problems. Therefore, in the current study, the approach of using tea-based biochar (BC) proven to have one of the most significant potentials as a soil amendment to reduce HM transmission to in-vitro-grown rice plants was investigated in the soil medium naturally contaminated with HMs. The tea-BC was produced from readily available local black tea waste of a conventional fermentation process and applied in the in-vitro experiments. Among the tested doses examined, 1% tea-BC showed a more positive effect on rice plant growth and development characterized by a better relative growth rate (59.7 and 84 mg g-1 d-1 for root and shoot tissues), photosynthetic pigment intactness (62.48 µg mL-1), cellular membrane integrity (93%), and relative water (96%) than the other rates (0% BC, 3%BC, 5%BC). The mRNA expression data highlights the probability of a cation diffusion facilitator (CDF) (OsMTP11) in concert with catalase isozyme (CATa) and dehydration-responsive element binding protein (DREB1a) linking the HM detoxification, oxidative defense, and dehydration pathways with the help of tea-BC. At the optimum concentration (1%BC), this approach might reduce HM accumulation levels of crops planted in HM-contaminated farmlands.