Activation and thermal stabilization of a recombinant γ-glutamyltranspeptidase from Bacillus licheniformis ATCC 27811 by monovalent cations.

The regulation of enzyme activity through complexation with certain metal ions plays an important role in many biological processes. In addition to divalent metals, monovalent cations (MVCs) frequently function as promoters for efficient biocatalysis. Here, we examined the effect of MVCs on the enzymatic catalysis of a recombinant γ-glutamyltranspeptidase (BlrGGT) from Bacillus licheniformis ATCC 27,811 and the application of a metal-activated enzyme to L-theanine synthesis. The transpeptidase activity of BlrGGT was enhanced by Cs+ and Na+ over a broad range of concentrations with a maximum of 200 mM. The activation was essentially independent of the ionic radius, but K+ contributed the least to enhancing the catalytic efficiency. The secondary structure of BlrGGT remained mostly unchanged in the presence of different concentrations of MVCs, but there was a significant change in its tertiary structure under the same conditions. Compared with the control, the half-life (t1/2) of the Cs+-enriched enzyme at 60 and 65 °C was shown to increase from 16.3 and 4.0 min to 74.5 and 14.3 min, respectively. The simultaneous addition of Cs+ and Mg2+ ions exerted a synergistic effect on the activation of BlrGGT. This was adequately reflected by an improvement in the conversion of substrates to L-theanine by 3.3-15.1% upon the addition of 200 mM MgCl2 into a reaction mixture comprising the freshly desalted enzyme (25 µg/mL), 250 mM L-glutamine, 600 mM ethylamine, 200 mM each of the MVCs, and 50 mM borate buffer (pH 10.5). Taken together, our results provide interesting insights into the complexation of MVCs with BlrGGT and can therefore be potentially useful to the biocatalytic production of naturally occurring γ-glutamyl compounds. KEY POINTS: • The transpeptidase activity of B. licheniformis Î³-glutamyltranspeptidase can be activated by monovalent cations. • The thermal stability of the enzyme was profoundly increased in the presence of 200 mM Cs+. • The simultaneous addition of Cs+and Mg2+ions to the reaction mixture improves L-theanine production.

Affinity Immobilization of a Bacterial Prolidase onto Metal-Ion-Chelated Magnetic Nanoparticles for the Hydrolysis of Organophosphorus Compounds.

In this study, silica-coated magnetic nanoparticles (SiMNPs) with isocyanatopropyltriethoxysilane as a metal-chelating ligand were prepared for the immobilization of His6-tagged Escherichia coli prolidase (His6-EcPepQ). Under one-hour coupling, the enzyme-loading capacity for the Ni2+-functionalized SiMNPs (NiNTASiMNPs) was 1.5 mg/mg support, corresponding to about 58.6% recovery of the initial activity. Native and enzyme-bound NiNTASiMNPs were subsequently characterized by transmission electron microscopy (TEM), superparamagnetic analysis, X-ray diffraction, and Fourier transform infrared (FTIR) spectroscopy. As compared to free enzyme, His6-EcPepQ@NiNTASiMNPs had significantly higher activity at 70 °C and pH ranges of 5.5 to 10, and exhibited a greater stability during a storage period of 60 days and could be recycled 20 times with approximately 80% retention of the initial activity. The immobilized enzyme was further applied in the hydrolysis of two different organophosphorus compounds, dimethyl p-nitrophenyl phosphate (methyl paraoxon) and diethyl p-nitrophenyl phosphate (ethyl paraoxon). The experimental results showed that methyl paraoxon was a preferred substrate for His6-EcPepQ and the kinetic behavior of free and immobilized enzymes towards this substance was obviously different. Taken together, the immobilization strategy surely provides an efficient means to deposit active enzymes onto NiNTASiMNPs for His6-EcPepQ-mediated biocatalysis.

Dimethyl Labeling Coupled with Mass Spectrometry for Topographical Characterization of Primary Amines on Monoclonal Antibodies.

Site-specific solvent accessibility of the primary amines (mainly lysine or the N-termini) on proteins is of great interest in many research areas because amines are an important functional group for protein conjugation. In this study, we coupled dimethyl labeling via reductive amination with liquid chromatography-mass spectrometry (LC-MS) to fully characterize the solvent accessibility of lysine residues and the N-termini on human immunoglobulin G (IgG). Circular dichroism (CD) and fluorescence spectroscopy revealed that dimethyl labeling did not alter the conformation of the native IgG molecule. Based on intact protein measurements, up to 28 (light chain) and 66 (heavy chain) dimethyl tags, covering all lysine residues and the N-termini, were sequentially incorporated into IgG molecules in 1000 s. All labeled sites were identified and quantified by a bottom-up proteomics approach. Some highly exposed hot-spots (for example, the N-termini of both the heavy and the light chains) and some buried sites (for example, K415 in the heavy chain and K39 in the light chain) were unambiguously revealed. This method was also used to characterize aggregation-induced structural changes in IgGs by increasing the temperature. Substantial changes in the labeling percentage of many lysine sites were observed, indicating a non-native aggregation triggered by thermal stress. Due to high labeling yields and the van der Waals surface of the labeling reagents being comparable to that of water, dimethyl labeling is a highly promising technique for probing the amine's surface topography of proteins. It can also be used as a complementary approach to other methods for resolving the higher-order structure of proteins by LC-MS.

Biophysical characterization of a recombinant aminopeptidase II from the thermophilic bacterium Bacillus stearothermophilus.

In the present study, the biophysical properties of His6-tagged Bacillus stearothermophilus aminopeptidase II (His6-tagged BsAmpII) are characterized in detail by gel-filtration, analytical ultracentrifugation, and various spectroscopic techniques. Using size-exclusion chromatography and analytical ultracentrifugation, we demonstrate that His6-tagged BsAmpII exists predominantly as a dimer in solution. The enzyme is active and stable at pHs ranging from 6.5 to 8.5. Far-UV circular dichroism analysis reveals that the secondary structures of His6-tagged BsAmpII are significantly altered in the presence of SDS, whereas the presence of 5-10% acetone and ethanol was harmless to the folding of the enzyme. Thermal unfolding of His6-tagged BsAmpII was found to be irreversible and led to the formation of aggregates. The native enzyme started to unfold beyond 0.6 M guanidine hydrochloride and had a midpoint of denaturation at 1.34 M. This protein remained active at concentrations of urea below 2.7 M but experienced an irreversible unfolding by >5 M denaturant. Taken together, this work lays a foundation for potential biotechnological applications of His6-tagged BsAmpII.

Covalent Immobilization of Bacillus licheniformis γ-Glutamyl Transpeptidase on Aldehyde-Functionalized Magnetic Nanoparticles.

This work presents the synthesis and use of surface-modified iron oxide nanoparticles for the covalent immobilization of Bacillus licheniformis γ-glutamyl transpeptidase (BlGGT). Magnetic nanoparticles were prepared by an alkaline solution of divalent and trivalent iron ions, and they were subsequently treated with 3-aminopropyltriethoxysilane (APES) to obtain the aminosilane-coated nanoparticles. The functional group on the particle surface and the amino group of BlGGT was then cross-linked using glutaraldehyde as the coupling reagent. The loading capacity of the prepared nanoparticles for BlGGT was 34.2 mg/g support, corresponding to 52.4% recovery of the initial activity. Monographs of transmission electron microscopy revealed that the synthesized nanoparticles had a mean diameter of 15.1 ± 3.7 nm, and the covalent cross-linking of the enzyme did not significantly change their particle size. Fourier transform infrared spectroscopy confirmed the immobilization of BlGGT on the magnetic nanoparticles. The chemical and kinetic behaviors of immobilized BlGGT are mostly consistent with those of the free enzyme. The immobilized enzyme could be recycled ten times with 36.2% retention of the initial activity and had a comparable stability respective to free enzyme during the storage period of 30 days. Collectively, the straightforward synthesis of aldehyde-functionalized nanoparticles and the efficiency of enzyme immobilization offer wide perspectives for the practical use of surface-bound BlGGT.

Effects of Sodium Dodecyl Sulfate on the Enzyme Catalysis and Conformation of a Recombinant γ-Glutamyltranspeptidase from Bacillus licheniformis.

The study of interactions between proteins and surfactants is of relevance in a diverse range of applications including food, enzymatic detergent formulation, and drug delivery. In spite of sodium dodecyl sulfate (SDS)-induced unfolding has been studied in detail at the protein level, deciphering the conformation-activity relationship of a recombinant γ-glutamyltranspeptidase (BlrGGT) from Bacillus licheniformis remains important to understand how the transpeptidase activity is related to its conformation. In this study, we examined the enzyme catalysis and conformational transition of BlrGGT in the presence of SDS. Enzymatic assays showed that the transpeptidase activity of BlrGGT was greatly affected by SDS in a concentration-dependent manner with approximately 90% inactivation at 6 mM. Native polyacrylamide gel electrophoresis of SDS-treated samples clearly revealed that the heterodimeric enzyme was apparently dissociated into two different subunits at concentrations above 2 mM. The study of enzyme kinetics showed that SDS can act as a mixed-type inhibitor to reduce the catalytic efficiency of BlrGGT. Moreover, the t1/2 value of the enzyme at 55 °C was greatly reduced from 495.1 min to 7.4 min in the presence of 1 mM SDS. The I3/I1 ratio of pyrene excimer fluorescence emission changed around 3.7 mM SDS in the absence of BlrGGT and the inflection point of enzyme samples was reduced to less than 2.7 mM. The Far-UV CD spectrum of the native enzyme had two negative peaks at 208 and 222 nm, respectively; however, both negative peaks increased in magnitude with increasing SDS concentration and reached maximal values at above 4.0 mM. The intrinsic fluorescence spectra of tryptophan further demonstrated that the SDS-induced enzyme conformational transition occurred at approximately 5.1 mM. Tween 20 significantly suppressed the interaction of BlrGGT with SDS by forming mixed micelles at a molar ratio of 1.0. Taken together, this study definitely promotes our better understanding of the relationship between the conformation and catalysis of BlrGGT.

Identification and characterization of the actin-binding motif of phostensin.

Phostensin, a protein phosphatase 1 F-actin cytoskeleton-targeting subunit encoded by KIAA1949, consists of 165 amino acids and caps the pointed ends of actin filaments. Sequence alignment analyses suggest that the C-terminal region of phostensin, spanning residues 129 to 155, contains a consensus actin-binding motif. Here, we have verified the existence of an actin-binding motif in the C-terminal domain of phostensin using colocalization, F-actin co-sedimentation and single filament binding assays. Our data indicate that the N-terminal region of phostensin (1-129) cannot bind to actin filaments and cannot retard the pointed end elongation of gelsolin-actin seeds. Furthermore, the C-terminal region of phostensin (125-165) multiply bind to the sides of actin filaments and lacks the ability to block the pointed end elongation, suggesting that the actin-binding motif is located in the C-terminal region of the phostensin. Further analyses indicate that phostensin binding to the pointed end of actin filament requires N-terminal residues 35 to 51. These results suggest that phostensin might fold into a rigid structure, allowing the N-terminus to sterically hinder the binding of C-terminus to the sides of actin filament, thus rendering phostensin binding to the pointed ends of actin filaments.

Selective and predicable amine conjugation sites by kinetic characterization under excess reagents.

The site selectivity for lysine conjugation on a native protein is difficult to control and characterize. Here, we applied mass spectrometry to examine the conjugation kinetics of Trastuzumab-IgG (Her-IgG) and α-lactalbumin under excess linker concentration ([L]0) based on the modified Michaelis-Menten equation, in which the initial rate constant per amine (kNH2 = Vmax/NH2/KM) was determined by the maximum reaction rate (Vmax/NH2) under saturated accessible sites and initial amine-linker affinity (1/KM). Reductive amination (RA) displayed 3-4 times greater Vmax/NH2 and a different panel of conjugation sites than that observed for N-hydroxysuccinimide ester (NHS) chemistry using the same length of polyethylene glycol (PEG) linkers. Moreover, faster conversion power rendered RA site selectivity among accessible amine groups and a greater tunable range of linker/protein ratio for aldehyde-linkers compared to those of the same length of NHS-linkers. Single conjugation with high yield or poly-conjugations with site homogeneity was demonstrated by controlling [L]0 or gradual addition to minimize the [L]0/KM ratio. Formaldehyde, the shortest aldehyde-linker with the greatest 1/KM, exhibited the highest selectivity and was shown to be a suitable probe to predict conjugation profile of aldehyde-linkers. Four linkers on the few probe-predicted hot spots were elucidated by kinetically controlled RA with conserved drug efficacy when conjugated with the payload. This study provides insights into controlling factors for homogenous and predictable amine bioconjugation.

Biophysical characterization of a recombinant leucyl aminopeptidase from Bacillus kaustophilus.

The biophysical properties of Bacillus kaustophilus leucyl aminopeptidase (BkLAP) were examined in terms of analytical ultracentrifugation, fluorescence spectroscopy, and circular dichroism. By using the analytical ultracentrifuge, we demonstrated that tetrameric BkLAP exists as the major form in solution at protein concentration of 1.5 mg/ml at pH 8.0. The native enzyme started to unfold beyond ~1 M GdnHCl and reached an unfolded intermediate with [GdnHCl](1/2) at 1.8 M. Thermal unfolding of BkLAP was found to be highly irreversible and led to a marked formation of aggregates.

Effects of C-terminal truncation on autocatalytic processing of Bacillus licheniformis gamma-glutamyl transpeptidase.

The role of the C-terminal region of Bacillus licheniformis gamma-glutamyl transpeptidase (BlGGT) was investigated by deletion analysis. Seven C-terminally truncated BlGGTs lacking 581-585, 577-585, 576-585, 566-585, 558-585, 523-585, and 479-585 amino acids, respectively, were generated by site-directed mutagenesis. Deletion of the last nine amino acids had no appreciable effect on the autocatalytic processing of the enzyme, and the engineered protein was active towards the synthetic substrate L-gamma-glutamyl-p-nitroanilide. However, a further deletion to Val576 impaired the autocatalytic processing. In vitro maturation experiments showed that the truncated BlGGT precursors, pro-Delta(576-585), pro-Delta(566-585), and pro-Delta(558-585), could partially precede a time-dependent autocatalytic process to generate the L- and S-subunits, and these proteins showed a dramatic decrease in catalytic activity with respect to the wild-type enzyme. The parental enzyme (BlGGT-4aa) and BlGGT were unfolded biphasically by guanidine hydrochloride (GdnCl), but Delta(577-585), Delta(576-585), Delta(566-585), Delta(558-585), Delta(523-585), and Delta(479-585) followed a monophasic unfolding process and showed a sequential reduction in the GdnCl concentration corresponding to half effect and DeltaG(0) for the unfolding. BlGGT-4aa and BlGGT sedimented at ~4.85 S and had a heterodimeric structure of approximately 65.23 kDa in solution, and this structure was conserved in all of the truncated proteins. The frictional ratio (f/f(o)) of BlGGT-4aa, BlGGT, Delta(581-585), and Delta(577-585) was 1.58, 1.57, 1.46, and 1.39, respectively, whereas the remaining enzymes existed exclusively as precursor form with a ratio of less than 1.18. Taken together, these results provide direct evidence for the functional role of the C-terminal region in the autocatalytic processing of BlGGT.

Phostensin caps to the pointed end of actin filaments and modulates actin dynamics.

Phostensin, a protein phosphatase 1 F-actin cytoskeleton targeting subunit encoded by KIAA1949, consists of 165 amino acids and is located between HLA-C and HLA-E gene clusters on human chromosome 6. In this current study, we characterized the biochemical functions of phostensin. Actin dynamics assays using gelsolin-actin seeds showed that phostensin decreases the elongation and depolymerization rates of actin filament pointed ends. The feature of phostensin that binds to the pointed ends of actin filaments was observed through fluorescent single filament binding assay. Taken together, our results suggested that phostensin is an actin filament pointed end-capping protein that is capable of modulating actin dynamics.

Mutational Analysis of a Highly Conserved PLSSMXP Sequence in the Small Subunit of Bacillus licheniformis γ-Glutamyltranspeptidase.

A highly conserved 458PLSSMXP464 sequence in the small subunit (S-subunit) of an industrially important Bacillus licheniformis γ-glutamyltranspeptidase (BlGGT) was identified by sequence alignment. Molecular structures of the precursor mimic and the mature form of BlGGT clearly reveal that this peptide sequence is in close spatial proximity to the self-processing and catalytic sites of the enzyme. To probe the role of this conserved sequence, ten mutant enzymes of BlGGT were created through a series of deletion and alanine-scanning mutagenesis. SDS-PAGE and densitometric analyses showed that the intrinsic ability of BlGGT to undergo autocatalytic processing was detrimentally affected by the deletion-associated mutations. However, loss of self-activating capacity was not obviously observed in most of the Ala-replacement mutants. The Ala-replacement mutants had a specific activity comparable to or greater than that of the wild-type enzyme; conversely, all deletion mutants completely lost their enzymatic activity. As compared with BlGGT, S460A and S461S showed greatly enhanced kcat/Km values by 2.73- and 2.67-fold, respectively. The intrinsic tryptophan fluorescence and circular dichroism spectral profiles of Ala-replacement and deletion mutants were typically similar to those of BlGGT. However, heat and guanidine hydrochloride-induced unfolding transitions of the deletion-associated mutant proteins were severely reduced as compared with the wild-type enzyme. The predictive mutant models suggest that the microenvironments required for both self-activation and catalytic reaction of BlGGT can be altered upon mutations.

Protective Effect of Biological Osmolytes against Heat- and Chaotropic Agent-Induced Denaturation of Bacillus licheniformis γ-Glutamyl Transpeptidase.

In the present study, the stabilizing effect of four different biological osmolytes on Bacillus licheniformis γ-glutamyl transpeptidase (BlGGT) was investigated. BlGGT appeared to be stable under temperatures below 40°C, but the enzyme retained less than 10% of its activity at 60°C. The tested osmolytes exhibited different degrees of effectiveness against temperature inactivation of BlGGT, and sucrose was found to be the most effective among these. The use of circular dichroism spectroscopy for studying the secondary structure of BlGGT revealed that the temperature-induced conformational change of the protein molecule could be prevented by the osmolytes. Consistently, the molecular structure of the enzyme was essentially conserved by the osmolytes at elevated temperatures as monitored by fluorescence spectroscopy. Sucrose was further observed to counteract guanidine hydrochloride (GdnHCl)- and urea-induced denaturation of BlGGT. Taken together, we observed evidently that some well-known biological osmolytes, especially sucrose, make a dominant contribution to the structural stabilization of BlGTT.

Facile immobilization of Bacillus licheniformis γ-glutamyltranspeptidase onto graphene oxide nanosheets and its application to the biocatalytic synthesis of γ-l-glutamyl peptides.

For the practical application of Bacillus licheniformis γ-glutamyltranspeptidase (BlGGT), we illustrated a simple and efficient approach to fabricate a biocatalytic system by immobilizing the enzyme onto graphene oxide (GO) nanosheets via both non-covalent (GO-BlGGT) and covalent (GO/GA-BlGGT) bonds. The enzyme-loading capacity for the prepared GO/GA nanomaterial was 3.47 mg/mg support, corresponding to 68.7% recovery of the initial activity. Native and enzyme-bound layered GOs were characterized by X-ray diffraction, followed by Raman and Fouier transform infrared spectroscopy, elemental analysis and thermogram analysis. As compared to the free form of BlGGT, the immobilized enzymes exhibited significantly higher activity, possibly due to the beneficial effect of the layered GO carrier. The kinetic behaviors of GO-BlGGT and GO/GA-BlGGT were mostly consistent with those of free enzyme. The covalently immobilized enzyme had a comparable stability respective to free enzyme during a storage period of 30 days and could be recycled nine times with 45.3% retention of the initial activity. Besides, the biocatalytic synthesis of γ-l-glutamyl-phenylalanine and γ-l-glutamyl-leucine by immobilized enzymes resulted in the product yield of more than 31%. Taken together, these results suggest that the facile strategy is an economical means of depositing bioactive enzymes upon GO nanosheets for BlGGT-mediated biocatalysis.

Functional role of the conserved glycine residues, Gly481 and Gly482, of the γ-glutamyltranspeptidase from Bacillus licheniformis.

Six mutants bearing single amino acid substitutions in the small subunit of Bacillus licheniformis γ-glutamyltranspeptudase (BlGGT) have been constructed by site-directed mutagenesis. The resultant enzymes were overexpressed in Escherichia coli and purified by affinity chromatography for biochemical and biophysical characterizations. Replacing Gly481 by either Ala or Glu did affect both autocatalytic processing and catalytic activity of the enzyme, but the substitution of this residue to arginine resulted in an unprocessed enzyme with insignificant catalytic activity. The replacement of another conserved glycine residue, Gly482, by either Ala or Glu caused a significant change in the functional integrity of the enzyme. Moreover, the mutation of Gly482 to arginine led to a marked reduction in the autocatalytic processing. Structural analyses revealed that the fluorescence and circular dichroism properties of mutant proteins were basically consistent with those of BlGGT. However, guanidine hydrochloride (GdnHCl)-induced transitions of most mutants were profoundly reduced in comparison with that of wild-type enzyme. Molecular modeling suggests that the conserved Gly481 and Gly482 residues of BlGGT are located at critical positions to create an environment suitable for both autoprocessing and catalytic reactions.

High-level expression and molecular characterization of a recombinant prolidase from Escherichia coli NovaBlue.

Long-term use of organophosphorus (OP) compounds has become an increasing global problem and a major threat to sustainability and human health. Prolidase is a proline-specific metallopeptidase that can offer an efficient option for the degradation of OP compounds. In this study, a full-length gene from Escherichia coli NovaBlue encoding a prolidase (EcPepQ) was amplified and cloned into the commercially-available vector pQE-30 to yield pQE-EcPepQ. The overexpressed enzyme was purified from the cell-free extract of isopropyl thio-ß-D-galactoside IPTG-induced E. coli M15 (pQE-EcPepQ) cells by nickel-chelate chromatography. The molecular mass of EcPepQ was determined to be about 57 kDa by 12% sodium dodecyl sulfate-polyacrylamide gel electrophoresis and the result of size-exclusion chromatography demonstrated that the enzyme was mainly present in 25 mM Tris-HCl buffer (pH 8.0) as a dimeric form. The optimal conditions for EcPepQ activity were 60 °C, pH 8.0, and 0.1 mM Mn2+ ion. Kinetic analysis with Ala-Pro as the substrate showed that the K m and k cat values of EcPepQ were 8.8 mM and 926.5 ± 2.0 s-1, respectively. The thermal unfolding of EcPepQ followed a two-state process with one well-defined unfolding transition of 64.2 °C. Analysis of guanidine hydrochloride (GdnHCl)-induced denaturation by tryptophan emission fluorescence spectroscopy revealed that the enzyme had a [GdnHCl]0.5,N-U value of 1.98 M. The purified enzyme also exhibited some degree of tolerance to various water/organic co-solvents. Isopropanol and tetrahydrofuran were very detrimental to the enzymatic activity of EcPepQ; however, other more hydrophilic co-solvents, such as formamide, methanol, and ethylene glycol, were better tolerated. Eventually, the non-negative influence of some co-solvents on both catalytic activity and structural stability of EcPepQ allows to adjust the reaction conditions more suitable for EcPepQ-catalyzed bioprocess.

Site-specific covalent modifications of human insulin by catechol estrogens: Reactivity and induced structural and functional changes.

Proteins, covalently modified by catechol estrogens (CEs), were identified recently from the blood serum of diabetic patients and referred to as estrogenized proteins. Estrogenization of circulating insulin may occur and affect its molecular functioning. Here, the chemical reactivity of CEs towards specific amino acid residues of proteins and the structural and functional changes induced by the estrogenization of insulin were studied using cyclic voltammetry, liquid chromatography-mass spectrometry, circular dichroism spectroscopy, molecular modeling, and bioassays. Our results indicate that CEs, namely, 2- and 4-hydroxyl estrogens, were thermodynamically and kinetically more reactive than the catechol moiety. Upon co-incubation, intact insulin formed a substantial number of adducts with one or multiple CEs via covalent conjugation at its Cys 7 in the A or B chain, as well as at His10 or Lys29 in the B chain. Such conjugation was coupled with the cleavage of inter-chain disulfide linkages. Estrogenization on these sites may block the receptor-binding pockets of insulin. Insulin signaling and glucose uptake levels were lower in MCF-7 cells treated with modified insulin than in cells treated with native insulin. Taken together, our findings demonstrate that insulin molecules are susceptible to active estrogenization, and that such modification may alter the action of insulin.

Site-directed mutagenesis of a conserved Asn450 residue of Bacillus licheniformis γ-glutamyltranspeptidase.

Bacillus licheniformis γ-glutamyltranspeptidase (BlGGT) belongs to N-terminal nucleophile hydrolase superfamily in which all inclusive members are synthetized as single-chain precursors, and then self-processed to form mature enzymes. Here we investigated the role of a conserved Asn450 residue in BlGGT through site-directed mutagenesis and molecular characterization of four relevant variants. Substitution of Asn450 by arginine resulted in a significant reduction in the catalytic activity of BlGGT. Conversely, N450A and N450D displayed an enhanced activity. The catalytic efficiency of BlGGT was calculated to be 16.04mM(-1)s(-1), but this value was either decreased to 8.93mM(-1)s(-1) in N450K or increased to more than 123.65mM(-1)s(-1) in N450A and N450D. In addition, the ratio of transpeptidation to hydrolysis was increased from 3.5 to more than 7.6 by the mutations. Structural analyses showed that fluorescence, circular dichroism spectra and thermal denaturation profiles of mutant proteins were essentially consistent with those of BlGGT. However, guanidine hydrochloride (GdnHCl)-induced transition was significantly reduced in comparison with the wild-type enzyme. Molecular modeling suggests that residue Asn450 of BlGGT is important to create suitable environments for both autoprocessing and catalytic reactions.

Gene expression and molecular characterization of a chaperone protein HtpG from Bacillus licheniformis.

Heat shock protein 90 (Hsp90/HtpG) is a highly abundant and ubiquitous ATP-dependent molecular chaperone consisting of three flexibly linked regions, an N-terminal nucleotide-binding domain, middle domain, and a C-terminal domain. Here the putative htpG gene of Bacillus licheniformis was cloned and heterologously expressed in Escherichia coli M15 cells. Native-gel electrophoresis, size exclusion chromatography, and cross-linking analysis revealed that the recombinant protein probably exists as a mixture of monomer, dimer and other oligomers in solution. The optimal conditions for the ATPase activity of B. licheniformis HtpG (BlHtpG) were 45°C and pH 7.0 in the presence of 0.5mM Mg(2+) ions. The molecular architecture of this protein was stable at higher temperatures with a transition point (Tm) of 45°C at neutral pH, whereas the Tm value was reduced to 40.8°C at pH 10.5. Acrylamide quenching experiment further indicated that the dynamic quenching constant (Ksv) of BlHtpG became larger at higher pH values. BlHtpG also experienced a significant change in the protein conformation upon the addition of ATP and organic solvents. Collectively, our experiment data may provide insights into the molecular properties of BlHtpG and identify the alteration of protein structure to forfeit the ATPase activity at alkaline conditions.

Characterization and comparability of stress-induced oxidation and deamidation on vulnerable sites of etanercept products.

An etanercept biosimilar, TuNEX(®), was compared to the innovator drug, Enbrel(®), for its reaction to stress-induced oxidation and deamidation, which may affect drug efficacy. A tryptic peptide map of both etanercept products was generated by liquid chromatography (LC) using mass spectrometry (MS) and ultraviolet (UV) spectrophotometry detection methods. The sequence of each modified or non-modified peptide peak was assigned based on accurate measurement of the mass of the protein and analysis utilizing tandem MS. Similar profiles of intrinsic oxidation on methionine (M) and deamidation on asparagine (N) were obtained for the two products, regardless of a two-amino acid (AA) residue variance in the heavy chain (Fc) between them. The level of oxidative stress exerted by tert-butyl hydroperoxide (tBHP), and alkaline stress exerted by a pH 10.4 solution, was examined using an LC-UV method. The results indicated that TuNEX(®) demonstrated a similar stress-induced modification profile compared to that of Enbrel(®). For both products, oxidative stress increased the oxidation from an intrinsically low (0-6.9%) to moderate or high (42-100%) level for almost all M residues (M30, M174, M187, M223, M272, and M448); alkaline stress increased the deamidation level of N404 from a low (0.0 or 1.7%) to moderate (19-26%) level. Based the results of a cell-based bioactivity assay, TuNEX(®) also exhibited a similar level of bioactivity as Enbrel(®) in unstressed, oxidative-stressed, or alkaline-stressed conditions. The bioactivity of both products remained unaltered by oxidative stress but was reduced by alkali stress. In conclusion, our data indicated that TuNEX(®) exhibits a similar chemical stress profile as that of Enbrel(®) in terms of oxidation and deamidation as well as bioactivity.