Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate.

The release of wastewaters containing relatively low levels of nitrate (NO3-) results in sufficient contamination to induce harmful algal blooms and to elevate drinking water NO3- concentrations to potentially hazardous levels. In particular, the facile triggering of algal blooms by ultra-low concentrations of NO3- necessitates the development of efficient methods for NO3- destruction. However, promising electrochemical methods suffer from weak mass transport under low reactant concentrations, resulting in long treatment times (on the order of hours) for complete NO3- destruction. In this study, we present flow-through electrofiltration via an electrified membrane incorporating nonprecious metal single-atom catalysts for NO3- reduction activity enhancement and selectivity modification, achieving near-complete removal of ultra-low concentration NO3- (10 mg-N L-1) with a residence time of only a few seconds (10 s). By anchoring Cu single atoms supported on N-doped carbon in a carbon nanotube interwoven framework, we fabricate a free-standing carbonaceous membrane featuring high conductivity, permeability, and flexibility. The membrane achieves over 97% NO3- removal with high N2 selectivity of 86% in a single-pass electrofiltration, which is a significant improvement over flow-by operation (30% NO3- removal with 7% N2 selectivity). This high NO3- reduction performance is attributed to the greater adsorption and transport of nitric oxide under high molecular collision frequency coupled with a balanced supply of atomic hydrogen through H2 dissociation during electrofiltration. Overall, our findings provide a paradigm of applying a flow-through electrified membrane incorporating single-atom catalysts to improve the rate and selectivity of NO3- reduction for efficient water purification.

Rapid, Selective, and Chemical-Free Removal of Dissolved Silica from Water via Electrosorption: Feasibility and Mechanisms.

The unavoidable and detrimental formation of silica scale in engineered processes necessitates the urgent development of effective, economic, and sustainable strategies for dissolved silica removal from water. Herein, we demonstrate a rapid, chemical-free, and selective silica removal method using electrosorption. Specifically, we confirm the feasibility of exploiting local pH dynamics at the electrodes in flow-through electrosorption, achieved through a counterintuitive cell configuration design, to induce ionization and concomitant electrosorption of dissolved silica. In addition, to improve the feasibility of silica electrosorption under high-salinity solutions, we developed a silica-selective anode by functionalizing porous activated carbon cloths with aluminum hydroxide nanoparticles (Al(OH)3-p-ACC). The modification markedly enhances silica sorption capacity (2.8 vs 1.1 mgsilica ganode-1) and reduces the specific energy consumption (13.3 vs 19.8 kWh kgsilica-1). Notably, the modified electrode retains remarkable silica sorption capacity even in the presence of high concentrations of co-occurring ions (up to 100 mM NaCl). The mechanisms underlying the superior silica removal stability and selectivity with the Al(OH)3-p-ACC electrode are also elucidated, revealing a synergistic interaction involving outer-sphere and inner-sphere complexation between dissolved silica and Al(OH)3 nanoparticles on the electrodes. Moreover, we find that effective regeneration of the electrodes may be achieved by applying a reverse potential during discharge, although complete regeneration of the modified electrodes may necessitate alternative materials or process optimization. We recommend the adoption of feedwater-specific designs for the development of future silica-selective electrodes in electrosorption capable of meeting silica removal demands across a wide range of engineered systems.

A case study showing highly traceable sources of bacteria on surfaces of university buildings.

University students predominantly spend their time indoors, where prolonged exposure raises the risk of contact with microorganisms of concern. However, our knowledge about the microbial community characteristics on university campus and their underpinnings is limited. To address it, we characterized bacterial communities from the surfaces of various built environments typical of a university campus, including cafeterias, classrooms, dormitories, offices, meeting rooms, and restrooms, in addition to human skin. The classrooms harbored the highest α-diversity, while the cafeterias had the lowest α-diversity. The bacterial community composition varied significantly across different building types. Proteobacteria, Actinobacteria, Firmicutes, Bacteroidetes, and Cyanobacteria were common phyla in university buildings, accounting for more than 90 % of total abundance. Staphylococcus aureus was the most abundant potential pathogen in classrooms, dormitories, offices, restrooms, and on human skin, indicating a potential risk for skin disease infections in these buildings. We further developed a new quantitative pathogenic risk assessment method according to the threat of pathogens to humans and found that classrooms exhibited the highest potential risk. The fast expectation-maximization algorithm identified 59 %-86 % of bacterial sources in buildings, with the human skin as the largest bacterial source for most buildings. As the sources of bacteria were highly traceable, we showed that homogeneous selection, dispersal limitation, and ecological drift were major ecological forces that drove community assembly. Our findings have important implications for predicting the distribution and sources of indoor dust bacterial communities on university campus.

Self-Powered Disinfection Using Triboelectric, Conductive Wires of Metal-Organic Frameworks.

Efficient water disinfection is vitally needed in rural and disaster-stricken areas lacking power supplies. However, conventional water disinfection methods strongly rely on external chemical input and reliable electricity. Herein, we present a self-powered water disinfection system using synergistic hydrogen peroxide (H2O2) assisted electroporation mechanisms driven by triboelectric nanogenerators (TENGs) that harvest electricity from the flow of water. The flow-driven TENG, assisted by power management systems, generates a controlled output with aimed voltages to drive a conductive metal-organic framework nanowire array for effective H2O2 generation and electroporation. The injured bacteria caused by electroporation can be further damaged by facile diffused H2O2 molecules at high throughput. A self-powered disinfection prototype enables complete disinfection (>99.9999% removal) over a wide range of flows up to 3.0 × 104 L/(m2 h) with low water flow thresholds (200 mL/min; ∼20 rpm). This rapid, self-powered water disinfection method is promising for pathogen control.

Promising Mass-Productive 4-Inch Commercial SERS Sensor with Particle in Micro-Nano Porous Ag/Si/Ag Structure Using in Auxiliary Diagnosis of Early Lung Cancer.

The construction of commercial surface enhanced Raman scattering (SERS) sensors suitable for clinical applications is a pending problem, which is heavily limited by the low production of high-performance SERS bases, because they usually require fine or complicated micro/nano structures. To solve this issue, herein, a promising mass-productive 4-inch ultrasensitive SERS substrate available for early lung cancer diagnosis is proposed, which is designed with a special architecture of particle in micro-nano porous structure. Benefitting from the effective cascaded electric field coupling inside the particle-in-cavity structure and efficient Knudsen diffusion of molecules within the nanohole, the substrate exhibits remarkable SERS performance for gaseous malignancy biomarker, with the limit of detection is 0.1 ppb and the average relative standard deviation value at different scales (from cm2 to µm2 ) is ≈16.5%. In practical application, this large-sized sensor can be further divided into small ones (1 × 1 cm2 ), and more than 65 chips will be obtained from just one 4-inch wafer, greatly increasing the output of commercial SERS sensor. Further, a medical breath bag composed of this small chip is designed and studied in detail here, which suggested high-specificity recognition for lung cancer biomarker in mixed mimetic exhalation tests.

Discovery of therapeutic targets for spinal cord injury based on molecular mechanisms of axon regeneration after conditioning lesion.

BACKGROUND: Preinjury of peripheral nerves triggers dorsal root ganglia (DRG) axon regeneration, a biological change that is more pronounced in young mice than in old mice, but the complex mechanism has not been clearly explained. Here, we aim to gain insight into the mechanisms of axon regeneration after conditioning lesion in different age groups of mice, thereby providing effective therapeutic targets for central nervous system (CNS) injury. METHODS: The microarray GSE58982 and GSE96051 were downloaded and analyzed to identify differentially expressed genes (DEGs). The protein-protein interaction (PPI) network, the miRNA-TF-target gene network, and the drug-hub gene network of conditioning lesion were constructed. The L4 and L5 DRGs, which were previously axotomized by the sciatic nerve conditioning lesions, were harvested for qRT-PCR. Furthermore, histological and behavioral tests were performed to assess the therapeutic effects of the candidate drug telmisartan in spinal cord injury (SCI). RESULTS: A total of 693 and 885 DEGs were screened in the old and young mice, respectively. Functional enrichment indicates that shared DEGs are involved in the inflammatory response, innate immune response, and ion transport. QRT-PCR results showed that in DRGs with preinjury of peripheral nerve, Timp1, P2ry6, Nckap1l, Csf1, Ccl9, Anxa1, and C3 were upregulated, while Agtr1a was downregulated. Based on the bioinformatics analysis of DRG after conditioning lesion, Agtr1a was selected as a potential therapeutic target for the SCI treatment. In vivo experiments showed that telmisartan promoted axonal regeneration after SCI by downregulating AGTR1 expression. CONCLUSION: This study provides a comprehensive map of transcriptional changes that discriminate between young and old DRGs in response to injury. The hub genes and their related drugs that may affect the axonal regeneration program after conditioning lesion were identified. These findings revealed the speculative pathogenic mechanism involved in conditioning-dependent regenerative growth and may have translational significance for the development of CNS injury treatment in the future.

Prediction nomogram based on 18F-FDG PET/CT and clinical parameters for patients with diffuse large B-cell lymphoma.

The objective of this study was to develop a nomogram including parameters assessed by 18F-FDG PET/CT and clinical parameters for patients with diffuse large B-cell lymphoma (DLBCL) to predict progression-free survival (PFS). A total of 181 patients with pathologically diagnosed DLBCL at Sichuan Cancer Hospital and Institute from March 2015 to December 2020 were enrolled in this retrospective study. The area under the receiver operating characteristic (ROC) curve (AUC) was used to calculate the optimal cutoff values of the semiquantitative parameters (SUVmax, TLG, MTV, and Dmax) for PFS. A nomogram was constructed according to multivariate Cox proportional hazards regression. The predictive and discriminatory capacities of the nomogram were then measured using the concordance index (C-index), calibration plots, and Kaplan-Meier curves. The predictive and discriminatory capacities of the nomogram and the International Prognostic Index of the National Comprehensive Cancer Network (NCCN-IPI) were compared via the C-index and AUC. Multivariate analysis demonstrated that male gender and pretreatment Ann Arbor stage III-IV, non-GCB, elevated lactate dehydrogenase (LDH), number of extranodal organ involvement (Neo)>1, MTV≥152.8 cm3, and Dmax ≥53.9 cm were associated with unfavorable PFS (all p<0.05). The nomogram, including gender, Ann Arbor stage, pathology type, Neo, LDH levels, MTV, and Dmax, showed good prediction accuracy, with a C-index of 0.760 (95% CI: 0.727-0.793), which was higher than that of NCCN-IPI (0.710; 95% CI: 0.669-751). The calibration plots for 2-year demonstrated good consistency between the predicted and observed probabilities for survival time. We established a nomogram including MTV, Dmax, and several clinical parameters to predict the PFS of patients with DLBCL, and the nomogram showed better predictability and higher accuracy than NCCN-IPI.

Microalgae Commercialization Using Renewable Lignocellulose Is Economically and Environmentally Viable.

Conventional phototrophic cultivation for microalgae production suffers from low and unstable biomass productivity due to limited and unreliable light transmission outdoors. Alternatively, the use of a renewable lignocellulose-derived carbon source, cellulosic hydrolysate, offers a cost-effective and sustainable pathway to cultivate microalgae heterotrophically with high algal growth rate and terminal density. In this study, we evaluate the feasibility of cellulosic hydrolysate-mediated heterotrophic cultivation (Cel-HC) for microalgae production by performing economic and environmental comparisons with phototrophic cultivation through techno-economic analysis and life cycle assessment. We estimate a minimum selling price (MSP) of 4722 USD/t for producing high-purity microalgae through Cel-HC considering annual biomass productivity of 300 t (dry weight), which is competitive with the conventional phototrophic raceway pond system. Revenues from the lignocellulose-derived co-products, xylose and fulvic acid fertilizer, could further reduce the MSP to 2976 USD/t, highlighting the advantages of simultaneously producing high-value products and biofuels in an integrated biorefinery scheme. Further, Cel-HC exhibits lower environmental impacts, such as cumulative energy demand and greenhouse gas emissions, than phototrophic systems, revealing its potential to reduce the carbon intensity of algae-derived commodities. Our results demonstrate the economic and environmental competitiveness of heterotrophic microalgae production based on renewable bio-feedstock of lignocellulose.

Antioxidant, AChE inhibitory, and anticancer effects of Verbascum thapsus extract.

Verbascum thapsus (VT) is a medicinal plant that is used in folk medicine to treat a variety of ailments. For this study, the biological functions of VT methanol extract were determined in vitro. The plant's methanol extract was created through the maceration process. The phytochemical composition of plant extracts was investigated using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). The antioxidant capacity of the extract was determined using the DPPH (2,2-diphenyl-1-picrylhydrazil) and ABTS (2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) tests and its cytotoxicity was assessed using the MTT ((3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, a tetrazole)) assay on the Caco-2 (human colorectal adenocarcinoma cells), LNCaP (Lymph Node Carcinoma of the Prostate), and HEK293 cell lines (Human embryonic kidney 293 cells) used to model colon, prostate, and non-cancerous cells. VT extract showed low DPPH and ABTS radical scavenging activities compared to standard antioxidants at 30 mg/ml concentration. In addition, it was determined that VT extract inhibited acetylcholinesterase enzyme.

A New Cd(II)-Based Coordination Polymer for Efficient Photocatalytic Removal of Organic Dyes.

Coordination polymers (CPs) are a diverse class of multi-dimensional compounds that show promise as photocatalysts for degrading dyes in polluted water. Herein, a new 1D Cd(II)-based coordination polymer with the formula [Cd(bpyp)(nba)2] (1) (bpyp = 2,5-bis(pyrid-4-yl)pyridine and Hnba = 4-nitrobenzoic acid) is synthesized and characterized. In 1, the two carboxyl groups of two different nba- ligands show µ2-η1:η1 and µ1-η1:η1 coordination modes to connect the CdII centers and sit on either side of the chain along the b direction. The produced CP 1 was utilized as the photocatalyst in the process of the photodegradation of methyl blue (MB), methyl orange (MO), rhodamine B (RhB), and methyl violet (MV) dyes when exposed to UV light. The photocatalytic degradation activities of CP 1 were analyzed, and the results suggest that it exhibits an extraordinary efficiency in the degradation of MB, MV, MO, and RhB. RhB has a 95.52% efficiency of degradation, whereas MV has a 58.92% efficiency, MO has 35.44%, and MB has 29.24%. The photodecomposition of dyes is catalyzed mostly by •O2- and •OH-, as shown by research involving the trapping of radicals.

New 5,5-(1,4-Phenylenebis(methyleneoxy)diisophthalic Acid Appended Zn(II) and Cd(II) MOFs as Potent Photocatalysts for Nitrophenols.

Metal-organic frameworks (MOFs) are peculiar multimodal materials that find photocatalytic applications for the decomposition of lethal molecules present in the wastewater. In this investigation, two new d10-configuration-based MOFs, [Zn2(L)(H2O)(bbi)] (1) and [Cd2(L)(bbi)] (2) (5,5-(1,4-phenylenebis(methyleneoxy)diisophthalic acid (H2L) and 1,1'-(1,4-butanediyl)bis(imidazole) (bbi)), have been synthesized and characterized. The MOF 1 displayed a (4,6)-connected (3.43.52)(32.44.52.66.7) network topology, while 2 had a (3,10)-connected network with a Schläfli symbol of (410.511.622.72)(43)2. These MOFs have been employed as photocatalysts to photodegrade nitrophenolic compounds, especially p-nitrophenol (PNP). The photocatalysis studies reveal that 1 displayed relatively better photocatalytic performance than 2. Further, the photocatalytic efficacy of 1 has been assessed by altering the initial PNP concentration and photocatalyst dosage, which suggest that at 80 ppm PNP concentration and at its 50 mg concentration the MOF 1 can photo-decompose around 90.01% of PNP in 50 min. Further, radical scavenging experiments reveal that holes present over 1 and ·OH radicals collectively catalyze the photodecomposition of PNP. In addition, utilizing density of states (DOS) calculations and Hirshfeld surface analyses, a plausible photocatalysis mechanism for nitrophenol degradation has been postulated.

Extra storage capacity in transition metal oxide lithium-ion batteries revealed by in situ magnetometry.

In lithium-ion batteries (LIBs), many promising electrodes that are based on transition metal oxides exhibit anomalously high storage capacities beyond their theoretical values. Although this phenomenon has been widely reported, the underlying physicochemical mechanism in such materials remains elusive and is still a matter of debate. In this work, we use in situ magnetometry to demonstrate the existence of strong surface capacitance on metal nanoparticles, and to show that a large number of spin-polarized electrons can be stored in the already-reduced metallic nanoparticles (that are formed during discharge at low potentials in transition metal oxide LIBs), which is consistent with a space charge mechanism. Through quantification of the surface capacitance by the variation in magnetism, we further show that this charge capacity of the surface is the dominant source of the extra capacity in the Fe3O4/Li model system, and that it also exists in CoO, NiO, FeF2 and Fe2N systems. The space charge mechanism revealed by in situ magnetometry can therefore be generalized to a broad range of transition metal compounds for which a large electron density of states is accessible, and provides pivotal guidance for creating advanced energy storage systems.

Reduced Graphene Oxide Triggers Peracetic Acid Activation for Robust Removal of Micropollutants: The Role of Electron Transfer.

Peracetic acid (PAA) serves as a potent and low-toxic oxidant for contaminant removal. Radical-mediated catalytic PAA oxidation processes are typically non-selective, rendering weakened oxidation efficacy under complex water matrices. Herein, we explored the usage of reduced graphene oxide (rGO) for PAA activation via a non-radical pathway. Outperforming the most catalytic PAA oxidation systems, the rGO-PAA system exhibits near-complete removal of typical micropollutants (MPs) within a short time (<2 min). Non-radical direct electron transfer (DET) from MPs to PAA plays a decisive role in the MP degradation, where accelerated DET is achieved by a higher potential of the rGO-PAA reactive surface complexes. Benefitting from DET, the rGO-PAA system shows robust removal of multiple MPs under complex water matrices and with low toxicity. Notably, in the DET regime, the electrostatic attraction of rGO to both PAA and target MP is a critical prerequisite for achieving efficient oxidation, depending on the conditions of solution pH and MP pKa. A heatmap model building on such an electrostatic interaction is further established as guidance for regulating the performance of the DET-mediated PAA oxidation systems. Overall, our work unveils the imperative role of DET for rGO-activated PAA oxidation, expanding the knowledge of PAA-based water treatment strategies.

Catalytic Membrane with Copper Single-Atom Catalysts for Effective Hydrogen Peroxide Activation and Pollutant Destruction.

The superior catalytic property of single-atom catalysts (SACs) renders them highly desirable in the energy and environmental fields. However, using SACs for water decontamination is hindered by their limited spatial distribution and density on engineered surfaces and low stability in complex aqueous environments. Herein, we present copper SACs (Cu1) anchored on a thiol-doped reactive membrane for water purification. We demonstrate that the fabricated Cu1 features a Cu-S2 coordination─one copper atom is bridged by two thiolate sulfur atoms, resulting in high-density Cu-SACs on the membrane (2.1 ± 0.3 Cu atoms per nm2). The Cu-SACs activate peroxide to generate hydroxyl radicals, exhibiting fast kinetics, which are 40-fold higher than those of nanoparticulate Cu catalysts. The Cu1-functionalized membrane oxidatively removes organic pollutants from feedwater in the presence of peroxide, achieving efficient water purification. We provide evidence that a dual-site cascade mechanism is responsible for in situ regeneration of Cu1. Specifically, one of the two linked sulfur atoms detaches the oxidized Cu1 while donating one electron, and an adjacent free thiol rebinds the reduced Cu(I)-S pair, retrieving the Cu-S2 coordination on the reactive membrane. This work presents a universal, facile approach for engineering robust SACs on water-treatment membranes and broadens the application of SACs to real-world environmental problems.

Single-Atom Cobalt Incorporated in a 2D Graphene Oxide Membrane for Catalytic Pollutant Degradation.

We introduce a new graphene oxide (GO)-based membrane architecture that hosts cobalt catalysts within its nanoscale pore walls. Such an architecture would not be possible with catalysts in nanoscale, the current benchmark, since they would block the pores or alter the pore structure. Therefore, we developed a new synthesis procedure to load cobalt in an atomically dispersed fashion, the theoretical limit in material downsizing. The use of vitamin C as a mild reducing agent was critical to load Co as dispersed atoms (Co1), preserving the well-stacked 2D structure of GO layers. With the addition of peroxymonosulfate (PMS), the Co1-GO membrane efficiently degraded 1,4-dioxane, a small, neutral pollutant that passes through nanopores in single-pass treatment. The observed 1,4-dioxane degradation kinetics were much faster (>640 times) than the kinetics in suspension and the highest among reported persulfate-based 1,4-dioxane destruction. The capability of the membrane to reject large organic molecules alleviated their effects on radical scavenging. Furthermore, the advanced oxidation also mitigated membrane fouling. The findings of this study present a critical advance toward developing catalytic membranes with which two distinctive and complementary processes, membrane filtration and advanced oxidation, can be combined into a single-step treatment.

Synergistic Nanowire-Enhanced Electroporation and Electrochlorination for Highly Efficient Water Disinfection.

Conventional water disinfection methods such as chlorination typically involve the generation of harmful disinfection byproducts and intensive chemical consumption. Emerging electroporation disinfection techniques using nanowire-enhanced local electric fields inactivate microbes by damaging their outer structures without byproduct formation or chemical dosing. However, this physical-based method suffers from a limited inactivation efficiency under high water flux due to an insufficient contact time. Herein, we integrate electrochlorination with nanowire-enhanced electroporation to achieve a synergistic flow-through process for efficient water disinfection targeting bacteria and viruses. Electroporation at the cathode induces sub-lethal damages on the microbial outer structures. Subsequently, electrogenerated active chlorine at the anode aggravates these electroporation-induced injuries to the level of lethal damage. This sequential flow-through disinfection system achieves complete disinfection (>6.0-log) under a very high water flux of 2.4 × 104 L/(m2 h) with an applied voltage of 2.0 V. This disinfection efficiency is 8 times faster than that of electroporation alone. Further, the specific energy consumption for the disinfection by this novel process is extremely low (8 × 10-4 kW h/m3). Our results demonstrate a promising method for rapid and energy-efficient water disinfection by coupling electroporation with electrochlorination to meet vital needs for pathogen elimination.

AFF4 facilitates melanoma cell progression by regulating c-Jun activity.

Melanoma is characterized by high mortality and poor prognosis due to metastasis. AFF4 (AF4/FMR2 family member 4), as a scaffold protein, is a component of the super elongation complex (SEC), and is involved in the progression of tumors, e.g., leukemia, head and neck squamous cell carcinoma (HNSCC). However, few studies on AFF4 have focused on melanoma. Here, AFF4 expression levels and clinicopathological features were evaluated in melanoma tissue samples. Then, we performed cell proliferation, migration and invasion assays in A375 and A2058 cells lines in vitro to evaluate the role of AFF4 in melanoma. The effects of AFF4 knockdown in vivo were characterized via a xenograft mouse model. Finally, the correlation between c-Jun and AFF4 protein levels in melanoma was analyzed by rescue assay and immunohistochemistry (IHC). We found that AFF4 expression was upregulated in melanoma tumor tissues and that AFF4 protein expression was also closely related to the prognosis of patients with cutaneous melanoma. Moreover, AFF4 could promote the invasion and migration of melanoma cells by mediating epithelial to mesenchymal transition (EMT). AFF4 might regulate c-Jun activity to promote the invasion and migration of melanoma cells. Importantly, c-Jun was regulated by the AFF4 promoted melanoma tumorigenesis in vivo. Taken together, AFF4 may be a novel oncogene that promotes melanoma progression through regulation of c-Jun activity.

Performance of 18 F-FAPI PET/CT in assessing glioblastoma before radiotherapy: a pilot study.

BACKGROUND: We aimed to determine the performance of 18 F-FAPI PET/CT used for preprocedural assessment of glioblastoma before radiotherapy. METHODS: Twelve glioblastoma patients having undergone incomplete surgical resection or biopsy were examined with 18 F-FAPI PET/CT and MRI scanning before radiotherapy. All patients had confirmed tumor residues according to findings of histopathological and/or long-term clinical and radiological follow-ups. Lesion characterization data, including SUVmax and tumor-to-background ratio (TBR) on PET/CT were attained. PET/CT and MRI findings were compared in terms of number of lesions. The correlation between immunohistochemistry, molecular expression, and PET/CT parameters was also evaluated. RESULTS: 18 F-FAPI PET/CT detected 16 FAPI-avid out of 23 lesions in 12 patients described on MRI. MRI was statistically different from 18 F-FAPI PET/CT for lesion detection according to the exact McNemar statistical test (P = 0.0156). The SUVmax and TBR of the glioblastomas was 7.08 ± 3.55 and 19.95 ± 13.22, respectively. The sensitivity and positive predictive value (PPV) of 18 F-FAPI PET were 69.6% and 100%, respectively. Neither the Ki-67 index nor the molecular expression was correlated with the FAPI-PET/CT parameters. CONCLUSION: 18 F-FAPI PET/CT detects glioblastomas at a lower rate than MRI. However, the 100% PPV of the examination may make it useful for differentiating controversial lesions detected on MRI. The 18 F-FAPI-avid lesions are displayed more clearly probably due to a higher TBR. 18 F-FAPI PET/CT imaging might find application in glioblastoma biopsy and radiotherapy planning.

Antimony oxide nanostructures in the monolayer limit: self-assembly of van der Waals-bonded molecular building blocks.

Antimony oxide nanostructures have been identified as candidates for a range of electronic and optoelectronic applications. Here we demonstrate the growth of 2-dimensional antimony oxide nanostructures on various substrates, including highly oriented pyrolytic graphite (HOPG), MoS2 and α-Bi(110) nanoislands. Using scanning tunneling microscopy (STM) we show that the nanostructures formed are exclusively highly crystalline α-Sb2O3(111) monolayers with a lattice constant of 796 pm ± 7 pm. The nanostructures are triangular with lateral dimensions of up to ∼30 nm. Even though elemental antimony nanostructures are grown simultaneously mixed phases are not observed and both materials exhibit their own distinct growth modes. Moiré patterns are also observed and simulated, allowing confirmation of the atomic unit cell and an understanding of the orientation of the Sb2O3 structures with respect to the supporting materials. As in the bulk, the Sb2O3 nanostructures are formed from Sb4O6 molecules that are weakly interacting through van der Waals forces. This allows physical modification of the nanostructures with the STM tip. Scanning tunnelling spectroscopy reveals a wide band gap of at least 3.5 eV. Finally, we show that possible alternative structures that have unit cells comparable to those observed can be excluded based on our DFT calculations. The considered structures are a 2 × 2 reconstruction of ß-Sb with one vacancy per unit cell and a van der Waals solid composed of Sb4 clusters. Previous reports have predominantly demonstrated Sb2O3 structures with much larger thicknesses.

Engineered Nanoconfinement Accelerating Spontaneous Manganese-Catalyzed Degradation of Organic Contaminants.

Manganese(III/IV) oxide minerals are known to spontaneously degrade organic pollutants in nature. However, the kinetics are too slow to be useful for engineered water treatment processes. Herein, we demonstrate that nanoscale Mn3O4 particles under nanoscale spatial confinement (down to 3-5 nm) can significantly accelerate the kinetics of pollutant degradation, nearly 3 orders of magnitude faster compared to the same reaction in the unconfined bulk phase. We first employed an anodized aluminum oxide scaffold with uniform channel dimensions for experimental and computational studies. We found that the observed kinetic enhancement resulted from the increased surface area of catalysts exposed to the reaction, as well as the increased local proton concentration at the Mn3O4 surface and subsequent acceleration of acid-catalyzed reactions even at neutral pH in bulk. We further demonstrate that a reactive Mn3O4-functionalized ceramic ultrafiltration membrane, a more suitable scaffold for realistic water treatment, achieved nearly complete removal of various phenolic and aniline pollutants, operated under a common ultrafiltration water flux. Our findings mark an important advance toward the development of catalytic membranes that can degrade pollutants in addition to their intrinsic function as a physical separation barrier, especially since they are based on accelerating natural catalytic pathways that do not require any chemical addition.