BRCA1 and RNAi factors promote repair mediated by small RNAs and PALB2-RAD52.

Strong connections exist between R-loops (three-stranded structures harbouring an RNA:DNA hybrid and a displaced single-strand DNA), genome instability and human disease1-5. Indeed, R-loops are favoured in relevant genomic regions as regulators of certain physiological processes through which homeostasis is typically maintained. For example, transcription termination pause sites regulated by R-loops can induce the synthesis of antisense transcripts that enable the formation of local, RNA interference (RNAi)-driven heterochromation6. Pause sites are also protected against endogenous single-stranded DNA breaks by BRCA17. Hypotheses about how DNA repair is enacted at pause sites include a role for RNA, which is emerging as a normal, albeit unexplained, regulator of genome integrity8. Here we report that a species of single-stranded, DNA-damage-associated small RNA (sdRNA) is generated by a BRCA1-RNAi protein complex. sdRNAs promote DNA repair driven by the PALB2-RAD52 complex at transcriptional termination pause sites that form R-loops and are rich in single-stranded DNA breaks. sdRNA repair operates in both quiescent (G0) and proliferating cells. Thus, sdRNA repair can occur in intact tissue and/or stem cells, and may contribute to tumour suppression mediated by BRCA1.

Designing Different Heterometallic Organic Frameworks by Heteroatom and Second Metal Doping Strategies for the Electrocatalytic Oxygen Evolution Reaction.

Metal-organic frameworks (MOFs) are considered one of the most significant electrocatalysts for the sluggish oxygen evolution reaction (OER). Hence, a series of novel N,S-codoped Ni-based heterometallic organic framework (HMOF) (NiM-bptz-HMOF, M = Co, Zn, and Mn; bptz = 2,5-bis((3-pyridyl)methylthio)thiadiazole) precatalysts are constructed by the heteroatom and second metal doping strategies. The effective combination of the two strategies promotes electronic conductivity and optimizes the electronic structure of the metal. By regulation of the type and proportion of metal ions, the electrochemical performance of the OER can be improved. Among them, the optimized Ni6Zn1-bptz-HMOF precatalyst exhibits the best performance with an overpotential of 268 mV at 10 mA cm-2 and a small Tafel slope of 72.5 mV dec-1. This work presents a novel strategy for the design of modest heteroatom-doped OER catalysts.

Transition-Metal Porphyrin-Based MOFs In Situ-Derived Hybrid Catalysts for Electrocatalytic CO2 Reduction.

Excellent electrocatalytic CO2 reduction reaction activity has been demonstrated by transition metals and nitrogen-codoped carbon (M-N-C) catalysts, especially for transition-metal porphyrin (MTPP)-based catalysts. In this work, we propose to use one-step low-temperature pyrolysis of the isostructural MTPP-based metal-organic frameworks (MOFs) and electrochemical in situ reduction strategies to obtain a series of hybrid catalysts of Co nanoparticles (Co NPs) and MTPP, named Co NPs/MTPP (M = Fe, Co, and Ni). The in situ introduction of Co NPs can efficiently enhance the electrocatalytic ability of MTPP (M = Fe, Co, and Ni) to convert CO2 to CO, particularly for FeTPP. Co NPs/FeTPP endowed a high CO faradaic efficiency (FECOmax = 95.5%) in the H cell, and the FECO > 90.0% is in the broad potential range of -0.72 to -1.22 VRHE. In addition, the Co NPs/FeTPP achieved 145.4 mA cm-2 at a lower potential of -0.70 VRHE with an FECO of 94.7%, and the CO partial currents increased quickly to reach 202.2 mA cm-2 at -0.80 VRHE with an FECO of 91.6% in the flow cell. It is confirmed that Co NPs are necessary for hybrid catalysts to get superior electrocatalytic activity; Co NPs also can accelerate H2O dissociation and boost the proton supply capacity to hasten the proton-coupled electron-transfer process, effectively adjusting the adsorption strength of the reaction intermediates.

Scalable Synthesis of Robust MOF for Challenging Ethylene Purification and Propylene Recovery with Record Productivity.

Ethylene (C2H4) purification and propylene (C3H6) recovery are highly relevant in polymer synthesis, yet developing physisorbents for these industrial separation faces the challenges of merging easy scalability, economic feasibility, high moisture stability with great separation efficiency. Herein, we reported a robust and scalable MOF (MAC-4) for simultaneous recovery of C3H6 and C2H4. Through creating nonpolar pores decorated by accessible N/O sites, MAC-4 displays top-tier uptakes and selectivities for C2H6 and C3H6 over C2H4 at ambient conditions. Molecular modelling combined with infrared spectroscopy revealed that C2H6 and C3H6 molecules were trapped in the framework with stronger contacts relative to C2H4. Breakthrough experiments demonstrated exceptional separation performance for binary C2H6/C2H4 and C3H6/C2H4 as well as ternary C3H6/C2H6/C2H4 mixtures, simultaneously affording record productivities of 27.4 and 36.2 L kg-1 for high-purity C2H4 (≥99.9 %) and C3H6 (≥99.5 %). MAC-4 was facilely prepared at deckgram-scale under reflux condition within 3 hours, making it as a smart MOF to address challenging gas separations.

Confinement of Organic Dyes in UiO-66-Type Metal-Organic Frameworks for the Enhanced Synthesis of [1,2,5]Thiadiazole[3,4-g]benzoimidazoles.

Organic dyes as non-noble metal photosensitizers have attracted increasing attention due to their environmental friendliness and sustainability but suffer from fast deactivation and low stability. Here, we reported a fruitful strategy by the confinement and stabilization of visible light-active signal unit organic dyes within the metal-organic frameworks (MOFs) and developed a series of heterogeneous photocatalysts dye@UiO-66s [dye = fluorescein (FL)/rhodamine B (RhB)/eosin Y (EY), UiO-66s = UiO-66, and Bim-UiO-66]. It has been demonstrated that the encapsulated dyes can effectively sensitize MOF hosts and dominate the band structures and photocatalytic activities of dye@UiO-66s regardless of the ligand functionalization of MOFs. Photocatalytic experiments showed that these dye@UiO-66s exhibit enhanced activities relative to free dyes and among them, FL@Bim-UiO-66 displays excellent efficiencies toward the green synthesis of new carbon-bridged annulations, [1,2,5]thiadiazole[3,4-g]benzoimidazoles in the yield of up to 98% at room temperature with outstanding stability and reusability. Furthermore, the intramolecular cyclization intermediate was captured and characterized by the single-crystal X-ray diffraction analysis.

Solvato-Controlled Assembly and Structural Transformation of Emissive Poly-NHC-Based Organometallic Cages and Their Applications in Amino Acid Sensing and Fluorescence Imaging.

Stimuli-induced structural transformation of supramolecular cages has drawn increasing attention because of their sensitive feature to external variations as model systems to simulate biological processes. However, combining structural transformation and useful functions has remained a difficult task. This study reports the solvato-controlled self-assembly of two unique topologies with different emission characteristics, a water-soluble Ag8 L4 cage (A) and an Ag4 L2 cage (B), produced from the same sulfonate-pendant tetraphenylethene (TPE) bridged tetrakis-(1,2,4-triazolium) ligand. Both cages show interesting solvent-responsive reversible structural transformation, and the change of fluorescence signals can efficiently track the process. Additionally, water-soluble cage A exhibits unique properties in thermochromism, thiol amino acid sensing, and subcellular imaging in aqueous media.

Fabrication of the Antibiotic Sensor by the Multifunctional Stable Adjustable Luminescent Lanthanide Metal-Organic Frameworks.

In recent years, the irrational use of antibiotics has become very widespread. It is necessary to regulate this phenomenon through antibiotic detection. In this work, a series of isomorphic Ln-MOFs (Ln = Tb3+ and Eu3+) were synthesized from 1,3,5-tri(4-carboxyphenyl)benzene (H3L) and Ln3+ by the solvothermal method for the first time. A series of 1-EuxTb1-x with different luminescence were doped by changing the molar ratio of Tb3+ and Eu3+. Ln3+ forms a 4-connected 2D network structure through self-assembly with fully deprotonated L3-. It shows good chemical stability in water, and its luminescence is not affected by aqueous solutions with different pH values. 1-Eu demonstrates rapid and sensitive detection capabilities for MDZ and TET with good recyclability and low detection limits (10-5). In order to increase the practicability of 1-Eu, two portable sensors have been prepared, in which the fluorescent film (Film@1-Eu) has a detection limit of 10-4, and the sensitivity is only less than 10% of the titration results. A portable fluorescent test paper can reach the detection limit of 14.7 ppm. This study provides a new idea for the application of stable multifunctional materials in the field of fluorescence sensing.

Ameliorating Adsorption Performance for Poisonous Methylene Blue through the Amino Functionalization of Metal-Organic Frameworks.

Amino (-NH2)-functionalized metal-organic frameworks (MOFs) are widely applied to improve the properties of materials owing to the rich host-guest chemical properties of amino groups. In this work, the amino-functionalization strategy was thus employed to improve the sorption performance of methylene blue (MB). The introduction of -NH2 groups in AOBTC-Zn did not reduce the pore size of the framework but rather modulated and optimized the host-guest interactions of MOFs. The MB+ sorption result was significantly improved by the NH2-functionalized NH2-AOBTC-Zn. The results showed that the maximum sorption capacity of NH2-AOBTC-Zn is much higher (1623 mg/g) than that of AOBTC-Zn (204 mg/g), which was comparable with that of MIL-68(Al) (1666 mg/g). The adsorption kinetics and isothermal models indicated that the MB+ sorption processes of both MOFs were consistent with the Langmuir isothermal and pseudo-second-order kinetic models. The single-group and multicomponent sorption experiments showed that the sorption behavior was the result of π-π interaction, electrostatic interaction, hydrogen bonding interaction, and pore size interaction. In particular, NH2-AOBTC-Zn exhibits a higher adsorption capacity than AOBTC-Zn due to the additional hydrogen bonding interactions it provided. These may guide the design of porous MOFs with side group modification for liquid phase sorption/separation.

Paddle-Wheel-Shaped Porous Cu(II)-Organic Framework with Two Different Channels as an Absorbent for Methylene Blue.

The destruction of the ecological environment caused by human activity and modern industrial development is so severe that the water environment has become seriously polluted. Therefore, the exploration of high-efficiency absorbents has become one of the hot topics to solve this issue. Herein, a porous metal-organic framework [Cu(L)]·2.5H2O·0.5DMF (1, DMF = N,N-dimethylformamide) was successfully constructed using a rigid N-heterocyclic 5-(4-(1H,3,4-triazol-1-yl)phenyl)isophthalic acid (H2L) ligand. In particular, its structure includes the classical paddle-wheel-shaped secondary building units and two 1D channels with diameters of 7.2 and 3.2 Å, respectively. Complex 1 shows great sorption performance for methylene blue (MB) with a maximum capacity of 589 mg·g-1. The various influence factors, including the time, dye concentration, adsorbent dosage, and the pH of the solution, are investigated respectively. Also, the adsorption process is more in line with the first-order kinetics and the Langmuir isothermal adsorption model. The strong electrostatic force and intermolecular forces are primarily responsible for the remarkable adsorption ability of MB.

Separation of C2H2/C2H4/C2H6 and C2H2/CO2 in a Nitrogen-Rich Copper-Based Microporous Metal-Organic Framework.

The purification of industrially valuable C2H2 and C2H4 from multicomponent mixtures represents a crucial process in the chemical industry. In this study, we present a copper-based metal-organic framework (L-py-Cu) built on a nitrogen-rich organic linker that is capable of separating C2H2/C2H4/C2H6 and C2H2/CO2 mixtures, therefore producing highly pure C2H4 and C2H2, respectively. L-py-Cu exhibits favorable adsorption of C2H2 and C2H6 over C2H4 and thus achieves one-step C2H4 purification from C2H2/C2H4/C2H6 ternary mixtures, as verified by multicomponent breakthrough measurements. In addition, it can also extract C2H2 from C2H2/CO2 binary mixtures.

Cu-MOFs with Rich Open Metal and F Sites for Separation of C2H2 from CO2 and CH4.

Herein, we used the 4-fluoro-[1,1'-biphenyl]-3,4',5-tricarboxylic acid (H3fbptc) ligand to design and construct a new metal-organic framework (MOF), [Cu3(fbptc)2(H2O)3]·3NMP (1), which possesses rich accessible metal sites and F functional groups in the porous walls and shows high uptake for C2H2 (119.3 cm3 g-1) and significant adsorption selectivity for C2H2 over CH4 (14.4) and CO2 (3.6) at 298 K and 100 kPa. In particular, for the gas mixtures of C2H2-CH4 and C2H2-CO2, the MOF reveals large breakthrough time ratios (C2H2/CH4 = 13, C2H2/CO2 = 5.9), which are particularly prominent in dynamic breakthrough experiments, also confirming the excellent potential for the practical separation of C2H2 from two-component mixtures (C2H2-CH4 and C2H2-CO2) and even three-component mixtures (C2H2-CO2-CH4).

One Co-MOF with F Active Sites for Separation of C2H2 from CO2, C2H4, and CH4.

Separating acetylene (C2H2) from other light hydrocarbons and carbon dioxide (CO2) mixtures under mild conditions poses significant challenges due to the remarkably similar properties between C2H2 and those gases. For the goal of C2H2 separation, a F-functionalized organic linker, H2F-PyIP = 2-fluorine-5-(4-pyridyl)isophthalic acid, was designed, and the corresponding metal-organic framework (MOF), {[Co2(F-PyIP)2DMF]·4H2O}n (1), was constructed. The MOF with open channels decorated by the active sites of the F groups revealed the exceptional C2H2 uptake and selectivity over CO2, C2H4, and CH4. The breakthrough experiments with different molar ratios of C2H2-C2H4, C2H2-CO2, and other gas mixtures further verified superior separation capacity of the MOF. In particular, the dynamic separation time intervals for gas mixtures (C2H2/CO2 = 1:1, 1:5, 1:10, and 1:20) fell in the range 30-44 min, highlighting the potential of the MOF for tackling the challenging C2H2/CO2 separation process.

Incorporating a D-A-D-Type Benzothiadiazole Photosensitizer into MOFs for Photocatalytic Oxidation of Phenylsulfides and Benzylamines.

Oxidation and removal of highly toxic sulfides and amines are particularly important for environmental and human security but remain challenging. Here, incorporating an excellent photosensitizer, donor-acceptor-donor (D-A-D)-type 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic (H2L), into metal-organic frameworks (MOFs) has been manifested to promote the charge separation, affording four three-dimensional (3D) MOFs (isostructural 1-Co/1-Zn with Co2/Zn2 units, and 2-Gd/2-Tb with Gd/Tb-cluster chains) as photocatalysts in the visible light-driven air-O2-mediated catalytic oxidation and removal of hazardous phenylsulfides and benzylamines. Impressively, structure-property correlation illustrated that the transition metal centers assembled in MOFs play an important role in the photocatalytic activity, and we can conclude that 1-Zn can be a robust heterogeneous catalyst possessing good light adsorption and fast charge separation in oxidation removal reactions of both benzylamines and phenylsulfides under visible light irradiation and room temperature with excellent activity/selectivity, stability, and reusability.

Active Sites Decorated Nonpolar Pore-Based MOF for One-step Acquisition of C2 H4 and Recovery of C3 H6.

Herein, a 2-fold interpenetrated metal-organic framework (MOF) Zn-BPZ-TATB with accessible N/O active sites in nonpolar pore surfaces was reported for one-step C2 H4 purification from C2 H6 or C3 H6 mixtures as well as recovery of C3 H6 from C2 H6 /C3 H6 /C2 H4 mixtures. The MOF exhibits the favorable C2 H6 and C3 H6 uptakes (>100 cm3 g-1 at 298 K under 100 kPa) as well as selective adsorption of C2 H6 and C3 H6 over C2 H4 . The C3 H6 - and C2 H6 -selective feature were investigated detailedly by experimental tests as well as sorption kinetic studyies. Molecular modelling revealed the multiple interactions between C3 H6 or C2 H6 molecules and methyl groups as well as triazine rings in pores. Zn-BPZ-TATB not only can directly generate 323.4 L kg-1 and 15.4 L kg-1 of high-purity (≥99.9 %) C2 H4 from C3 H6 /C2 H4 and C2 H6 /C2 H4 mixtures, but also provide a large high-purity (≥99.5 %) C3 H6 recovery capacity of 60.1 L kg-1 from C3 H6 /C2 H4 mixtures. More importantly, the high-purity C3 H6 (≥99.5 %) and C2 H4 (≥99.9 %) with the productivities of 38.2 and 12.7 L kg-1 can be simultaneously obtained from C2 H6 /C3 H6 /C2 H4 mixtures through a single adsorption/desorption cycle.

Amide-Functionalized In-MOF for Effective Hydrocarbon Separation and CO2 Catalytic Fixation.

Energy saving and emission reduction have always been the goal of separation and catalysis pursued in industrial production. Metal-organic frameworks (MOFs) are leading porous crystal materials with unique advantages in these fields. Based on an amide-modified ligand 5-(ethyl oxamate)-isophthalic acid (H2EtL), a new porous indium-organic framework (Me2NH2)1.5[In1.5L2]·2DMF·2H2O (1) was synthesized and structurally characterized. The unique porous environment gives it dual functional advantages in separation and catalysis. At room temperature, 1 possesses excellent adsorption capacities for C2 hydrocarbons and CO2, showing good separation behaviors for C2 hydrocarbons/CO2 on CH4 and C2H2 on CO2, which is conducive to efficient purification of CH4 and C2H2 confirmed by the breakthrough experiment. Meanwhile, catalytic results indicate that 1 can be used as a good catalyst for effective fixation of CO2 under mild conditions to form cyclic carbonates.

Highly Efficient I2 Sorption, CO2 Capture, and Catalytic Conversion by Introducing Nitrogen Donor Sites in a Microporous Co(II)-Based Metal-Organic Framework.

Recently, the development of porous absorbents for efficient CO2 and I2 capture has attracted considerable attention because of severe global climate change and environmental issues with the nuclear energy. Hence, a unique porous metal-organic framework (MOF), {[Co(L)]·DMF·2H2O}n (1, DMF = N,N-dimethylformamide) with uncoordinated N atoms was rationally constructed via using a heterofunctional 4,6-bis(4'-carboxyphenyl)pyrimidine (H2L) linker. Interestingly, 1 exhibits exceptional properties for I2 sorption, CO2 capture, and catalytic conversion. Particularly, I2 can be efficiently removed in both vapor and solution forms, and the adsorption amount can reach 676.25 and 345.28 mg g-1, respectively. Furthermore, complex 1 displays high adsorption capacity for CO2 (53.78 cm3 g-1, 273 K). Consequently, 1 is expected to be a promising and practical material for environmental purification due to its excellent adsorption properties.

Size Effect of Arylenediimide π-Conjugate Systems on the Photoresponsive Behaviors in Eu3+-Based Coordination Polymers.

Various arylenediimides (ADIs) have been applied to construct photoresponsive coordination polymers (CPs), while the size effect of ADI π-conjugate systems on the photoresponsive behaviors in CPs has been overlooked in the past few years. Herein, we emphasize the size effect of ADI π-conjugate systems on photoinduced electron transfer (ET) in CPs, taking two Eu3+-based CPs, [Eu(H2BINDI)(BINDI)0.5(H2O)2]·NH2(CH3)2·8H2O (1) and [Eu2(BIPMDI)(DMF)4(NO3)2]·H2O·2DMF (2) [H4BINDI = N,N'-bis(5-isophthalic acid)naphthalenediimide; H4BIPMDI = N,N'-bis(5-isophthalic acid)pyromellitic diimide; DMF = N,N-dimethylformamide], as a case. Both 1 and 2 display ET-based photochromic behaviors with distinct photoresponsive rates and coloration contrast, which can contribute to the size effect of diimide cores on the interfacial contacts of electron donors/acceptors. Meanwhile, ET between the neighboring larger NDI cores of the H4BINDI ligands can block ligand-to-metal charge transfer and quench luminescence of the Eu3+ metal center in 1. Therefore, this work will provide a theoretical basis for the development and exploration of photoresponsive materials.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions.

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH3 groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

Lanthanide-Organic Frameworks with Uncoordinated Lewis Base Sites: Tunable Luminescence, Antibiotic Detection, and Anticounterfeiting.

Several new isostructural lanthanide metal-organic frameworks (Ln-MOFs), {[Ln2(L)3DMA4]·2DMA}n (1-Ln, where Ln = Eu, Tb, or EuxTb1-x), were first constructed via the solvothermal reactions of 4,6-di(4-carboxyphenyl)pyrimidine and Ln3+ ions. 1-Ln exhibits a 4-connected two-dimensional framework endowed with uncoordinated Lewis base sites. An exploration of luminescence sensing demonstrated 1-Eu can be used for the selectivity detection of dimetridazole and metronidazole antibiotics in other antibiotics, blood plasma, and urine, acting as an exceptional recyclable luminescent probe. More importantly, the luminescent inks of 1-Ln are invisible, color adjustable, and stabilized, which may greatly improve their anticounterfeiting applications.

An Efficient Strategy for Reinforcing Flexible Ceramic Membranes.

Herein, we present a facile reinforcement method for the large-scale fabrication of highly flexible, mechanically stable, temperature-resistant ceramic lightweight membranes based on the cross-linked assembly of zirconia-silica (ZrO2-SiO2) nanofibrous and montmorillonite (MMT) nanosheets through electrospinning and a subsequent calcination process. The resulting MMT@ZrO2-SiO2 membranes exhibit high flexibility with a bending rigidity of 0.2 cN mm-1, robust mechanical performance with a tensile strength of up to 1.83 MPa, robust fire resistance, and temperature-invariant mechanical stability from -196 to 1000 °C. The thermal superinsulation with a thermal conductivity as low as 0.026 W m-1 K-1 and the improved mechanical strength can be attributed to the cross-linked interfacial interaction between the ZrO2-SiO2 nanofibers and the MMT nanosheets. Additionally, a firefighter uniform with MMT@ZrO2-SiO2 membranes inside features a superior thermal protective property up to the A2 level (combined flame and radiant exposure) and an excellent fire resistance of up to 1000 °C, which is ideal for next-generation firefighter uniform manufacturing.