RESUMO
Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS2@CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm-2, an open-circuit voltage (Voc) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm-2. This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics.
RESUMO
Optical interconnects exhibit superior potential in the precise regulation of photon transmission for organic photonic circuits. However, the rational design of well-defined organic heterostructures toward active optoelectronics remains challenging. Herein, we designed organic branched heterostructures (OBHs) with accurate spatial organization for optical interconnection. Notably, the precise regulation of OBHs has been controllably achieved including the trunk morphologies and the branched microwire number. Significantly, these as-prepared OBHs inherently exhibit the multichannel coupling outputs and the excitation position-dependent waveguide characteristics, leading to various outcoupling signals with tunable intensity and emission colors. The optical interconnects are realized due to the occurrence of exciton conversion and photon propagation between branch and trunk at the heterojunction, benefiting the application possibilities of two-dimensional (2D) optical barcodes.
RESUMO
BACKGROUND: Healthcare is crucial to patient care because it provides vital services for maintaining and restoring health. As healthcare technology evolves, cutting-edge tools facilitate faster diagnosis and more effective patient treatment. In the present age of pandemics, the Internet of Things (IoT) offers a potential solution to the problem of patient safety monitoring by creating a massive quantity of data about the patient through the linked devices around them and then analyzing it to estimate the patient's current status. Utilizing the IoT-based meta-heuristic algorithm allows patients to be remotely monitored, resulting in timely diagnosis and improved care. Meta-heuristic algorithms are successful, resilient, and effective in solving real-world enhancement, clustering, predicting, and grouping. Healthcare organizations need an efficient method for dealing with big data since the prevalence of such data makes it challenging to analyze for diagnosis. The current techniques used in medical diagnostics have limitations due to imbalanced data and the overfitting issue. OBJECTIVE: This study introduces the particle swarm optimization and convolutional neural network to be used as a meta-heuristic optimization method for extensive data analysis in the IoT to monitor patients' health conditions. METHOD: Particle Swarm Optimization is used to optimize the data used in the study. Information for a diabetes diagnosis model that includes cardiac risk forecasting is collected. Particle Swarm Optimization and Convolutional Neural Networks (PSO-CNN) results effectively make illness predictions. Support Vector Machine has been used to predict the possibility of a heart attack based on the classification of the collected data into projected abnormal and normal ranges for diabetes. RESULTS: The results of the simulations reveal that the PSO-CNN model used to predict diabetic disease increased in accuracy by 92.6%, precision by 92.5%, recall by 93.2%, F1-score by 94.2%, and quantization error by 4.1%. CONCLUSION: The suggested approach could be applied to identify cancer cells.
RESUMO
In situ polymerization has been proven to be an effective method to introduce functional materials into polymers. In this work, a nano-heterojunction material was prepared successfully and evenly dispersed in PET by in situ polymerization methods to yield multifunctionally modified PET. The modified PET fibers showed excellent antibacterial activity and strong moisture absorption and perspiration, which could efficiently expel moisture from humans. Significantly, these prepared PET textiles demonstrate a strong safety without any cytotoxicity. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the uniform dispersion of heterojunctions and well-defined truncated octahedra including nano-gold rods. A series of characterizations including FTIR, XPS, XRD and DSC showed that the nano-heterojunction participates in the reaction during polymerization. It is interesting that the SEM images of the modified PET fiber presented an intriguing organ fold structure, which makes a significant contribution to moisture absorption and perspiration. The formation mechanism is discussed preliminarily.
RESUMO
Flexible moisture-electric generators (MEGs) capture chemical energy from atmospheric moisture for sustainable electricity, gaining attention in wearable electronics. However, challenges persist in the large-scale integration and miniaturization of MEGs for long-term, high-power output. Herein, a vertical heterogeneous phase-engineering MoS2 nanosheet structure based silk and cotton were rationally designed and successfully applied to construct wearable MEGs for moisture-energy conversion. The prepared METs exhibit â¼0.8 V open-circuit voltage, â¼0.27 mA/cm2 current density for >10 h, and >36.12 µW/cm2 peak output power density, 3 orders higher than current standards. And the large-scale device realizes a current output of 0.145 A. An internal phase gradient between the 2H semiconductor MoS2 in carbonized silks and 1T metallic MoS2 in cotton fibers enables a phase-engineering-based heterogeneous electric double layer functioning as an equivalent parallel circuit, leading to enhanced high-power output. Owing to their facile customization for seamless adaptation to the human body, we envision exciting possibilities for these wearable METs as integrated self-power sources, enabling real-time monitoring of physiological parameters in wearable electronics.
RESUMO
Highly spatial and angular precision in epitaxial-growth process is crucial for constructing organic low-dimensional heterostructures (OLDHs) with the desired substructures, which remains significant challenge owing to the unpredicted location of complex heterogeneous nucleation. Herein, a dynamic epitaxial-growth approach is developed along the tailored longitudinal/horizontal directions to create diverse OLDHs with hierarchical architectures. The controlled morphology evolution of seed crystals from kinetic to thermodynamic species is achieved via incrementally increasing the crystallization time from 0 to 600 s. Accordingly, the kinetic and thermodynamic seed crystals respectively present the specific lattice-matching crystal-planes of (100) and (011), which facilitates the longitudinal epitaxial-growth (LG) process for triblock heterostructures, and the horizontal epitaxial-growth (HG) process for axial-branch heterostructures. The dominant core/shell heterostructures are prepared via both LG and HG processes with a crystallization time of ≈30 s. Significantly, these prepared OLDHs realize the rationally polarized exciton conversion for optical logic gate application through the exciton conversion and photon propagation at the heterojunction. This strategy provides an avenue for the precise synthesis of OLDHs with anisotropy optical characters for integrated optoelectronics.
RESUMO
Multifunctional and long-term stable wearable heating systems have attracted extensive attention from experts, yet smart textiles that only rely on harvesting the body's heat without additional energy still face huge challenges in practical applications. Herein, we rationally prepared the monolayer MXene Ti3C2Tx nanosheets via an in situ hydrofluoric acid generation method, which was further employed to construct a wearable heating system of MXene @ polyester polyurethane blend fabrics (MP textile) for the passive personal thermal management through a simple spraying process. Owing to the unique two-dimensional (2D) structure, the MP textile presents the desired mid-infrared emissivity, which could efficiently suppress the thermal radiation loss from the human body. Notably, the MP textile with an MXene concentration of 28 mg/mL exhibits a low mid-infrared emissivity of 19.53% at 7-14 µm. Significantly, these prepared MP textiles demonstrate an enhanced temperature of more than 6.83 °C compared with those of favorably traditional fabrics, involving the black polyester fabric, pristine polyester polyurethane blend fabric (PU/PET), and cotton, suggesting a charming indoor passive radiative heating performance. The temperature of real human skin covered by MP textile is 2.68 °C higher than that covered by cotton fabric. Impressively, these prepared MP textiles simultaneously possess attractive breathability, moisture permeability, mechanical strength, and washability, which provide new insight into human body temperature regulation and physical health.
RESUMO
Organic multilayer heterostructures with accurate spatial organization demonstrate strong light-matter interaction from excitonic responses and efficient carrier transfer across heterojunction interfaces, which are considered as promising candidates toward advanced optoelectronics. However, the precise regulation of the heterojunction surface area for finely adjusting exciton conversion and energy transfer is still formidable. Herein, organic bilayer heterostructures (OBHs) with controlled face-to-face heterojunction via a stepwise seeded growth strategy, which is favorable for efficient exciton propagation and conversion of optical interconnects are designed and synthesized. Notably, the relative position and overlap length ratio of component microwires (LDSA /LBPEA = 0.39-1.15) in OBHs are accurately regulated by modulating the crystallization time of seeded crystals, resulting into a tailored heterojunction surface area (R = Loverlap /LBPEA = 37.6%-65.3%). These as-prepared OBHs present the excitation position-dependent waveguide behaviors for optical outcoupling characteristics with tunable emission colors and intensities, which are applied into two-dimensional (2D) photonic barcodes. This strategy opens a versatile avenue to purposely design OBHs with tailored heterojunctions for efficient energy transfer and exciton conversion, facilitating the application possibilities of advanced integrated optoelectronics.
RESUMO
Harvesting sunlight into cost-effective electricity presents an enticing prospect for self-powered wearable applications. The photothermal materials with an extensive absorption are fundamental to achieve optical and thermal concentration of the sunlight for efficiency output electricity of wearable solar thermoelectric generators (STEGs). Here, we synthesize an organic charge-transfer (CT) cocrystal with a flat absorption from ultraviolet to second near-infrared region (200 to 1950 nanometers) and a high photothermal conversion efficiency (PCE) of 80.5%, which is introduced into polyurethane toward large-area nanofiber membrane by electrospinning technology. These corresponding membranes demonstrate a high PCE of 73.7% under the strain more than 80%. Sandwiched with carbon nanotube-based thermoelectric fibers, the membranes as stretchable solar absorbers of STEGs could supply a notably increase temperature gradient, processing a maximum output voltage density of 23.4 volts per square meter at 1:00 p.m. under sunlight. This strategy presents an important insight in heat management for wearable STEGs with a desired electricity output.
RESUMO
Organic photothermal materials integrating a high-efficiency light-heat conversion effect and high flexibility have generated immense interest in fundamental research and practical applications. Nevertheless, their practical applications still remain a challenge, owing to the complicated design, tedious synthesis, and limited programmable substrates. Herein, an organic charge-transfer cocrystal with a narrow energy gap of 0.33 eV and a high photothermal conversion efficiency (PCE) of 69.3% was rationally designed and synthesized via a facile self-assembly process, which was introduced into polyurethane for forming a large-area photothermal nanofiber membrane via electrospinning technology. Femtosecond transient absorption spectroscopy elucidates that the excellent PCE is attributed to the nonradiation transition process, including internal conversion and charge dissociation processes. Furthermore, the temperature of the as-prepared photothermal nanofiber membrane could quickly rise to 52 °C under laser irradiation with a power density of 0.183 W/cm2, suggesting a high PCE of 53.7%. This work successfully achieves the fabrication of a large-area photothermal membrane and the development of photothermal imaging.
RESUMO
Cesium tin halide (CsSnX3, where X is halogen) perovskite nanocrystals (NCs) are one of the most representative alternatives to their lead-based cousins. However, a fundamental understanding of how to regulate the growth kinetics of colloidal CsSnX3 NCs is still lacking and, specifically, the role of surfactants in affecting their growth kinetics remains incompletely understood. Here we report a general approach for colloidal synthesis of CsSnX3 perovskite NCs through a judicious combination of capping agents. We demonstrate that introducing a small amount of zwitterionic phosphatidylcholine in the reaction is of vital importance for regulating the growth kinetics of CsSnX3 NCs, which otherwise merely leads to the formation of large-sized powders. Based on a range of experimental characterization, we propose that the formation of intermediate complexes between zwitterionic phosphatidylcholine and the precursors and the steric hindrance effect of branched fatty acid side-chains of phosphatidylcholine can regulate the growth kinetics of CsSnX3, which enables us to obtain CsSnX3 NCs with emission quantum yields among the highest values ever reported. Our finding of using zwitterionic capping agents to regulate the growth kinetics may inspire more research on the synthesis of high-quality tin-based perovskite NCs that could speed up their practical applications in optoelectronic devices.
RESUMO
Two-dimensional transition metal dichalcogenides are of particular interest in high-performance photothermal conversion, yet there remains a huge challenge in their practical application in smart textiles for healthcare, energy, and personal protection. Herein, we controllably prepared MoS2 hollow nanospheres with a high photothermal conversion efficiency of 36% via a microemulsion-hydrothermal method, which was further applied to construct photothermal fibers for personal thermal management after a hot-blast dip-drying process. Because of the prominent photothermal effect, the temperature of the photothermal fibers sharply increases from the room temperature value of 25.0 to 55.5 °C in 60 s under near-infrared illumination with a power density of 500 W/cm2. Furthermore, the photothermal fiber pad demonstrated an obvious temperature enhancement of 38.0 °C from a skin temperature of 22.0 °C after it was irradiated by natural sunlight for 60 s. Significantly, the antibacterial elimination rates of the photothermal fibers for Escherichia coli and Staphylococcus aureus are â¼99.9 and â¼99.8%, respectively. This strategy affords an avenue toward the practical application of photothermal materials in smart fibers for personal thermoregulation.
RESUMO
One-dimensional Cu2O nanowires were successfully prepared with a template-free microwave synthesis. Neither a surfactant was needed (to induce the growth), nor a long reaction time was required for this method. The structural investigation confirmed the successful preparation of Cu2O. The morphology images showed that the radial size of the Cu2O nanowires was 10 nm. The possible growth mechanism was hypothesized according to morphology evolution and references. A series of time-dependent experiments indicated that as time increased, Cu2O primary particles grew radially into nanowires under microwave energy irradiation. The condition-variable tests revealed that the suitable quantity of NaOH played a vital role in Cu2O nanowire formation. The photocatalytic property of the sample was investigated by degradation of methyl orange under the irradiation of visible light at room temperature. Benefiting from its unique large surface area, 4 mg of the prepared catalyst degraded 73% of methyl orange (10 mg L-1) in 120 min.
RESUMO
Au@Cu2O cuboctahedron with gold triangular nanoplate core and Cu2O shell was synthesized by a chemical method. X-ray diffraction (XRD) and transmission electron microscopy (TEM) tests demonstrated that the as-synthesis samples were consisted of gold triangular nanoplate core and Cu2O shell, and both of them were in good crystallization. The effective size control of the particles could be realized by controlling the amount of Au cores added in the synthetic process and Au@Cu2O particles with different shell thickness could be synthesized. The decrease of Cu2O shell thickness had a great difference in the optical performance, including blue shift of the resonant peaks and enhanced absorption intensity. The growth process from rough sheet structure to cuboctahedron was also explored. The results of photocatalytic degradation experiment showed that Au@Cu2O particles showed much better photocatalytic performance than that of pure Cu2O. The improved photocatalytic property of the Au@Cu2O particles was attributed to the comprehensive effect of the enhanced visible-light absorption and high separation rate of electron-hole pairs.
RESUMO
BiPO4/Bi2S3 photocatalysts were successfully synthesized by a simple two-step hydrothermal process, which involved the initial formation of BiPO4 rod and then the attachment of Bi2S3 through ion exchange. The as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-vis diffuse reflectance spectra (UV-vis DRS). It was found that BiPO4 was regular rods with smooth surfaces. However, BiPO4/Bi2S3 heterojunction had a rough surface, which could be attributed to the attachment of Bi2S3 on the surface of BiPO4 rods. The BiPO4/Bi2S3 composite exhibited better photocatalytic performance than that of pure BiPO4 and Bi2S3 for the degradation of methylene blue (MB) and Rhodamine B (RhB) under visible light. The enhanced photocatalytic performance could be ascribed to synergistic effect of BiPO4/Bi2S3 heterojunction, in which the attached Bi2S3 nanoparticles could improve visible-light absorption and the BiPO4/Bi2S3 heterojunction suppressed the recombination of photogenerated electron-hole pairs. Our work suggested that BiPO4/Bi2S3 heterojunction could be a potential photocatalyst under visible light.
RESUMO
N-doped mesoporous TiO2 nanorods were fabricated by a modified and facile sol-gel approach without any templates. Ammonium nitrate was used as a raw source of N dopants, which could produce a lot of gasses such as N2, NO2, and H2O in the process of heating samples. These gasses were proved to be vitally important to form the special mesoporous structure. The samples were characterized by the powder X-ray diffraction, X-ray photoelectron spectrometer, nitrogen adsorption isotherms, scanning electron microscopy, transmission electron microscopy, and UV-visible absorption spectra. The average length and the cross section diameter of the as-prepared samples were ca. 1.5 µm and ca. 80 nm, respectively. The photocatalytic activity was evaluated by photodegradation of methylene blue (MB) in aqueous solution. The N-doped mesoporous TiO2 nanorods showed an excellent photocatalytic activity, which may be attributed to the enlarged surface area (106.4 m2 g-1) and the narrowed band gap (2.05 eV). Besides, the rod-like photocatalyst was found to be easy to recycle.