RESUMO
The detection of IgG/IgM antibodies is a crucial tool for the diagnosis of infectious diseases as they give specific information such as the stage of infection or when it approximately occurred. In this work, a linear cryogel array (LCA) technology is described for the detection of IgG and IgM antibodies, indicative of a borreliosis infection in human sera. The LCA consists of a transparent capillary filled with functionalized cryogel compartments. For the generation of these cryogel arrays, solutions containing a photo-copolymer and the appropriate antigens are sucked into a surface-modified glass capillary. The solution compartments are separated from each other through air pockets. After freezing the solutions, a photo-induced cross-linking process is performed, through which the solutions are transformed into cryogel compartments, covalently attached to the capillary walls. We show that the LCA technology allows the simultaneous detection of IgG and IgM antibodies via a sandwich immunoassay in sera from Borrelia-infected patients within 1 h for sample sizes of only 12 µL. A study with sera from 42 patients conducted with the LCAs and referenced - depending on the source of the sera - to a commercial line immunoassay and a chemiluminescent immunoassay, which are currently widely used for Lyme disease screening, demonstrates the diagnostic potential of the approach.
Assuntos
Criogéis , Doença de Lyme , Anticorpos Antibacterianos , Humanos , Imunoglobulina M , Doença de Lyme/diagnóstico , Sensibilidade e EspecificidadeRESUMO
Monitoring the quality of drinking water is an important issue for public health. Two of the main objectives of the European Project µAQUA were (i) the development of specific probes to detect and quantify pathogens in drinking water and (ii) the design of standardized sampling programs of water from different sources in Europe in order to obtain sufficient material for downstream analysis. Our phylochip contains barcodes that specifically identify freshwater pathogens for enabling the detection of organisms that can be risks for human health. Monitoring for organisms with molecular tools is rapid, more accurate and more reliable than traditional methods. Rapid detection means that mitigation strategies come into play faster with less harm to the community and to humans. Samples were collected from several waters in France, Germany, Ireland, Italy and Turkey over 2 years. We present microarray results for the presence of freshwater pathogens from brackish and freshwater sites in Northern Germany, and cyanobacterial cell numbers inferred from these sites. In a companion study from the same samples, cyanobacterial toxins were analyzed using two methods and those sites with highest toxin values also had highest cell numbers as inferred from this microarray study.
Assuntos
Toxinas Bacterianas/análise , Cianobactérias/isolamento & purificação , Água Doce/microbiologia , Análise em Microsséries/métodos , Água do Mar/microbiologia , Toxinas Bacterianas/genética , Cianobactérias/classificação , Cianobactérias/genética , Alemanha , HumanosRESUMO
Monitoring drinking water quality is an important public health issue. Two objectives from the 4 years, six nations, EU Project µAqua were to develop hierarchically specific probes to detect and quantify pathogens in drinking water using a PCR-free microarray platform and to design a standardised water sampling program from different sources in Europe to obtain sufficient material for downstream analysis. Our phylochip contains barcodes (probes) that specifically identify freshwater pathogens that are human health risks in a taxonomic hierarchical fashion such that if species is present, the entire taxonomic hierarchy (genus, family, order, phylum, kingdom) leading to it must also be present, which avoids false positives. Molecular tools are more rapid, accurate and reliable than traditional methods, which means faster mitigation strategies with less harm to humans and the community. We present microarray results for the presence of freshwater pathogens from a Turkish lake used drinking water and inferred cyanobacterial cell equivalents from samples concentrated from 40 into 1 L in 45 min using hollow fibre filters. In two companion studies from the same samples, cyanobacterial toxins were analysed using chemical methods and those dates with highest toxin values also had highest cell equivalents as inferred from this microarray study.
Assuntos
Água Potável/microbiologia , Monitoramento Ambiental/métodos , Lagos/microbiologia , Estações do Ano , Microbiologia da Água/normas , Qualidade da Água , Toxinas Bacterianas/análise , Cianobactérias/crescimento & desenvolvimento , Toxinas de Cianobactérias , Humanos , Lagos/química , Toxinas Marinhas/análise , Microcistinas/análise , TurquiaRESUMO
The ß1,2-glucans produced by bacteria are important in invasion, survival and immunomodulation in infected hosts be they mammals or plants. However, there has been a lack of information on proteins which recognize these molecules. This is partly due to the extremely limited availability of the sequence-defined oligosaccharides and derived probes for use in the study of their interactions. Here we have used the cyclic ß1,2-glucan (CßG) of the bacterial pathogen Brucella abortus, after removal of succinyl side chains, to prepare linearized oligosaccharides which were used to generate microarrays. We describe optimized conditions for partial depolymerization of the cyclic glucan by acid hydrolysis and conversion of the ß1,2-gluco-oligosaccharides, with degrees of polymerization 2-13, to neoglycolipids for the purpose of generating microarrays. By microarray analyses, we show that the C-type lectin receptor DC-SIGNR, like the closely related DC-SIGN we investigated earlier, binds to the ß1,2-gluco-oligosaccharides, as does the soluble immune effector serum mannose-binding protein. Exploratory studies with DC-SIGN are suggestive of the recognition also of the intact CßG by this receptor. These findings open the way to unravelling mechanisms of immunomodulation mediated by ß1,2-glucans in mammalian systems.
Assuntos
Brucella abortus/química , Lectinas Tipo C/química , Lectinas Tipo C/imunologia , Sondas Moleculares/análise , Sondas Moleculares/imunologia , Oligossacarídeos/análise , Oligossacarídeos/biossíntese , Brucella abortus/imunologia , Sistema Imunitário/imunologia , Análise em Microsséries , Oligossacarídeos/imunologiaRESUMO
A lab-on-a-chip multichannel sensing platform for biomedical analysis based on optical silicon nitride (SiNx) microring-resonators (MRR) was established. The resonators were surface functionalized and finally combined with a microfluidic chamber for validation using an avidin-biotin ligand-binding assay. The results with a limit of detection (LOD) of 2.3â10-5 and a mean intra-assay coefficient of variation (CV) of ±10.0 %, also under consideration of FDA guidelines, show promising future applicability for a wide variety of targets in the field of outpatient medical diagnostics and life science.Clinical Relevance- Biomarkers play a crucial role in physiological processes of the human body. To enable instantaneous and decentralized analysis of these markers, systems are needed that can be used in a laboratory-independent environment with minimal amounts of biofluid. An example is the utilization of such systems for neonates or infants.
Assuntos
Técnicas Biossensoriais , Óptica e Fotônica , Recém-Nascido , Humanos , Técnicas Biossensoriais/métodos , Fótons , Compostos de SilícioRESUMO
BACKGROUND: The Enterobacteriaceae comprise a large number of clinically relevant species with several individual subspecies. Overlapping virulence-associated gene pools and the high overall genome plasticity often interferes with correct enterobacterial strain typing and risk assessment. Array technology offers a fast, reproducible and standardisable means for bacterial typing and thus provides many advantages for bacterial diagnostics, risk assessment and surveillance. The development of highly discriminative broad-range microbial diagnostic microarrays remains a challenge, because of marked genome plasticity of many bacterial pathogens. RESULTS: We developed a DNA microarray for strain typing and detection of major antimicrobial resistance genes of clinically relevant enterobacteria. For this purpose, we applied a global genome-wide probe selection strategy on 32 available complete enterobacterial genomes combined with a regression model for pathogen classification. The discriminative power of the probe set was further tested in silico on 15 additional complete enterobacterial genome sequences. DNA microarrays based on the selected probes were used to type 92 clinical enterobacterial isolates. Phenotypic tests confirmed the array-based typing results and corroborate that the selected probes allowed correct typing and prediction of major antibiotic resistances of clinically relevant Enterobacteriaceae, including the subspecies level, e.g. the reliable distinction of different E. coli pathotypes. CONCLUSIONS: Our results demonstrate that the global probe selection approach based on longest common factor statistics as well as the design of a DNA microarray with a restricted set of discriminative probes enables robust discrimination of different enterobacterial variants and represents a proof of concept that can be adopted for diagnostics of a wide range of microbial pathogens. Our approach circumvents misclassifications arising from the application of virulence markers, which are highly affected by horizontal gene transfer. Moreover, a broad range of pathogens have been covered by an efficient probe set size enabling the design of high-throughput diagnostics.
Assuntos
Sondas de DNA/metabolismo , Enterobacteriaceae/genética , Genoma Bacteriano/genética , Ensaios de Triagem em Larga Escala/métodos , Técnicas de Diagnóstico Molecular/métodos , Análise de Sequência com Séries de Oligonucleotídeos/métodos , Anti-Infecciosos/farmacologia , Técnicas de Tipagem Bacteriana , DNA Bacteriano/genética , Árvores de Decisões , Farmacorresistência Bacteriana/efeitos dos fármacos , Farmacorresistência Bacteriana/genética , Enterobacteriaceae/classificação , Enterobacteriaceae/efeitos dos fármacos , Enterobacteriaceae/isolamento & purificação , Hibridização de Ácido Nucleico/efeitos dos fármacos , Análise de RegressãoRESUMO
Roll-to-roll UV nanoimprint lithography has superior advantages for high-throughput manufacturing of micro- or nano-structures on flexible polymer foils with various geometries and configurations. Our pilot line provides large-scale structure imprinting for cost-effective polymer biochips (4500 biochips/hour), enabling rapid and multiplexed detections. A complete high-volume process chain of the technology for producing structures like µ-sized, triangular optical out-couplers or capillary channels (width: from 1 µm to 2 mm, height: from 200 nm up to 100 µm) to obtain biochips (width: 25 mm, length: 75 mm, height: 100 µm to 1.5 mm) was described. The imprinting process was performed with custom-developed resins on polymer foils with resin thicknesses ranging between 125-190 µm. The produced chips were tested in a commercial point-of-care diagnostic system for multiplexed DNA analysis of methicillin resistant Staphylococcus aureus (e.g., mecA, mecC gene detections). Specific target DNA capturing was based on hybridisation between surface bound DNA probes and biotinylated targets from the sample. The immobilised biotinylated targets subsequently bind streptavidin-horseradish peroxidase conjugates, which in turn generate light upon incubation with a chemiluminescent substrate. To enhance the light out-coupling thus to improve the system performance, optical structures were integrated into the design. The limits-of-detection of mecA (25 bp) for chips with and without structures were calculated as 0.06 and 0.07 µM, respectively. Further, foil-based chips with fluidic channels were DNA functionalised in our roll-to-roll micro-array spotter following the imprinting. This straightforward approach of sequential imprinting and multiplexed DNA functionalisation on a single foil was also realised for the first time. The corresponding foil-based chips were able to detect mecA gene DNA sequences down to a 0.25 µM concentration.
Assuntos
Staphylococcus aureus Resistente à Meticilina , DNA/genética , Staphylococcus aureus Resistente à Meticilina/genética , Hibridização de Ácido Nucleico , Testes Imediatos , PolímerosRESUMO
The chemical composition of the functional surfaces of substrates used for microarrays is one of the important parameters that determine the quality of a microarray experiment. In addition to the commonly used contact angle measurements to determine the wettability of functionalized supports, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) are more specific methods to elucidate details about the chemical surface constitution. XPS yields information about the atomic composition of the surface, whereas from ToF-SIMS, information on the molecular species on the surface can be concluded. Applied on printed DNA microarrays, both techniques provide impressive chemical images down to the micrometer scale and can be utilized for label-free spot detection and characterization. Detailed information about the chemical constitution of single spots of microarrays can be obtained by high-resolution XPS imaging.
Assuntos
DNA Bacteriano/análise , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/normas , Silanos/química , Espectrometria de Massa de Íon Secundário , Espectrofotometria , Propriedades de Superfície , Fatores de Tempo , Raios XRESUMO
We report the chemistry and photophysics of atomic gold and silver particles in inorganic glasses. By synchrotron irradiation of gold-doped soda-lime silicate glasses we could create and identify unambiguously the gold dimer as a stable and bright luminescing particle embedded in the glassy matrix. The gold dimer spectra coincide perfectly with rare gas matrix spectra of Au(2). The glass matrix is, however, stable for years, and is hence perfectly suited for various applications. If the irradiated gold-doped sample is annealed at 550 degrees C a bright green luminescence can be recognized. Intense 337 nm excitation induces a decrease of the green luminescence and the reappearance of the 753 nm Au(2) emission, indicating a strong interrelationship between both luminescence centers. Time-dependent density functional theory (TD-DFT) calculations indicate that the green luminescence can be assigned to noble metal dimers bound to silanolate centers. These complexes are recognized as the first stages in the further cluster growth process, which has been investigated with small-angle x-ray scattering (SAXS). In silver-doped glasses, Ag(0) atoms can be identified with electron paramagnetic resonance (EPR) spectroscopy after synchrotron activation. Annealing at 300 degrees C decreases the concentration of Ag(1), but induces an intense white light emission with 337 nm excitation. The white luminescence can be decomposed into bands that are attributed to small silver clusters such as Ag(2), Ag(3) and Ag(4), and an additional band matching the green emission of gold-doped glasses.
RESUMO
Current knowledge about the spread of pathogens in aquatic environments is scarce probably because bacteria, viruses, algae and their toxins tend to occur at low concentrations in water, making them very difficult to measure directly. The purpose of this study was the development and validation of tools to detect pathogens in freshwater systems close to an urban area. In order to evaluate anthropogenic impacts on water microbiological quality, a phylogenetic microarray was developed in the context of the EU project µAQUA to detect simultaneously numerous pathogens and applied to samples from two different locations close to an urban area located upstream and downstream of Rome in the Tiber River. Furthermore, human enteric viruses were also detected. Fifty liters of water were collected and concentrated using a hollow-fiber ultrafiltration approach. The resultant concentrate was further size-fractionated through a series of decreasing pore size filters. RNA was extracted from pooled filters and hybridized to the newly designed microarray to detect pathogenic bacteria, protozoa and toxic cyanobacteria. Diatoms as indicators of the water quality status, were also included in the microarray to evaluate water quality. The microarray results gave positive signals for bacteria, diatoms, cyanobacteria and protozoa. Cross validation of the microarray was performed using standard microbiological methods for the bacteria. The presence of oral-fecal transmitted human enteric-viruses were detected using q-PCR. Significant concentrations of Salmonella, Clostridium, Campylobacter and Staphylococcus as well as Hepatitis E Virus (HEV), noroviruses GI (NoGGI) and GII (NoGII) and human adenovirus 41 (ADV 41) were found in the Mezzocammino site, whereas lower concentrations of other bacteria and only the ADV41 virus was recovered at the Castel Giubileo site. This study revealed that the pollution level in the Tiber River was considerably higher downstream rather than upstream of Rome and the downstream location was contaminated by emerging and re-emerging pathogens.
Assuntos
Bactérias/isolamento & purificação , Enterovirus/isolamento & purificação , Análise em Microsséries/métodos , Rios/microbiologia , Microbiologia da Água , Bactérias/genética , Doenças Transmissíveis Emergentes/microbiologia , Enterovirus/genética , Água Doce , Humanos , Filogenia , Reação em Cadeia da Polimerase/métodos , Rios/parasitologia , Vírus/genética , Vírus/isolamento & purificaçãoRESUMO
BACKGROUND: Drop drying is a key factor in a wide range of technical applications, including spotted microarrays. The applied nL liquid volume provides specific reaction conditions for the immobilization of probe molecules to a chemically modified surface. RESULTS: We investigated the influence of nL and µL liquid drop volumes on the process of probe immobilization and compare the results obtained to the situation in liquid solution. In our data, we observe a strong relationship between drop drying effects on immobilization and surface chemistry. In this work, we present results on the immobilization of dye labeled 20mer oligonucleotides with and without an activating 5'-aminoheptyl linker onto a 2D epoxysilane and a 3D NHS activated hydrogel surface. CONCLUSIONS: Our experiments identified two basic processes determining immobilization. First, the rate of drop drying that depends on the drop volume and the ambient relative humidity. Oligonucleotides in a dried spot react unspecifically with the surface and long reaction times are needed. 3D hydrogel surfaces allow for immobilization in a liquid environment under diffusive conditions. Here, oligonucleotide immobilization is much faster and a specific reaction with the reactive linker group is observed. Second, the effect of increasing probe concentration as a result of drop drying. On a 3D hydrogel, the increasing concentration of probe molecules in nL spotting volumes accelerates immobilization dramatically. In case of µL volumes, immobilization depends on whether the drop is allowed to dry completely. At non-drying conditions, very limited immobilization is observed due to the low oligonucleotide concentration used in microarray spotting solutions. The results of our study provide a general guideline for microarray assay development. They allow for the initial definition and further optimization of reaction conditions for the immobilization of oligonucleotides and other probe molecule classes to different surfaces in dependence of the applied spotting and reaction volume.
RESUMO
The last decade has witnessed a significant increase in interest in whole-cell biosensors for diverse applications, as well as a rapid and continuous expansion of array technologies. The combination of these two disciplines has yielded the notion of whole-cell array biosensors. We present a potential manifestation of this idea by describing the printing of a whole-cell bacterial bioreporters array. Exploiting natural bacterial tendency to adhere to positively charged abiotic surfaces, we describe immobilization and patterning of bacterial "spots" in the nanolitre volume range by a non-contact robotic printer. We show that the printed Escherichia coli-based sensor bacteria are immobilized on the surface, and retain their viability and biosensing activity for at least 2 months when kept at 4 °C. Immobilization efficiency was improved by manipulating the bacterial genetics (overproducing curli protein), the growth and the printing media (osmotic stress and osmoprotectants) and by a chemical modification of the inanimate surface (self-assembled layers of 3-aminopropyl-triethoxysilane). We suggest that the methodology presented herein may be applicable to the manufacturing of whole-cell sensor arrays for diverse high throughput applications.
Assuntos
Técnicas Biossensoriais/métodos , Escherichia coli/citologia , Análise Serial de Tecidos/métodos , Aderência Bacteriana , Técnicas Biossensoriais/instrumentação , Escherichia coli/genética , Escherichia coli/metabolismo , Engenharia Genética , Viabilidade Microbiana , Análise Serial de Tecidos/instrumentaçãoRESUMO
This report deals with the synthesis and the spectroscopic properties of two second generation (G2) dendrons with site-specific incorporated phenyl pyrene derivatives as solvatochromic fluorescent probes. The generations that do not carry the probe are equipped with volume dummies, pyrene moieties that do not show a solvatochromic effect. Two complementary G2 phenylene alkylene dendrons were synthesized using Suzuki-Miyaura cross coupling. Most of the reactions used in the 10-step sequence generating the target compounds proceeded in good yields. The incorporated probes can be selectively photoexcited and show solvatochromic shifts that are of the same magnitude as for the free probes in a homogeneous solvent environment. In addition to the charge-transfer fluorescence, a broad emission band is observed that is assigned to an intramolecular exciplex formation between the aryl pyrene chromophores.
RESUMO
The effects of 4-cyano and 3-cyano substituents on the spectroscopic properties and photoacidity of 3- and 4-hydroxystilbene have been investigated. In nonpolar solvents, the 3-hydroxycyanostilbenes have much longer singlet lifetimes and larger fluorescence quantum yields than do the 4-hydroxycyanostilbenes. The longer lifetimes of 3-hydroxystilbene and its cyano derivatives are attributed to a "meta effect" on the stilbene torsional barrier, similar to that previously observed for the aminostilbenes. The cyano substituent causes a marked increase in both ground state and excited-state acidity of the hydroxystilbenes in aqueous solution. The dynamics of excited-state proton transfer in methanol-water solution have been investigated by means of femtosecond time-resolved transient absorption spectroscopy. Assignment of the transient absorption spectra is facilitated by comparison to the spectra of the corresponding potassium salts of the conjugate bases and the methyl ethers, which do not undergo excited-state proton transfer. The 4-cyanohydroxystilbenes undergo excited-state proton transfer with rate constants of 5 x 10(11) s(-1). These rate constants are comparable to the fastest that have been reported to date for a hydroxyaromatic photoacid and approach the theoretical limit for water-mediated proton transfer. The isotope effect for proton transfer in deuterated methanol-water is 1.3 +/- 0.2, similar to the isotope effect for the dielectric response of water. The barrier for excited state double bond torsion of the conjugate bases is small for 4-cyano-4-hydroxystilbene but large for 4-cyano-3-hydroxystilbene. Thus the "meta effect" is observed for the singlet states of both the neutral and conjugate base.
RESUMO
Electron transfer (ET) processes in DNA are of current interest because of their involvement in oxidative strand cleavage reactions and their relevance to the development of molecular electronics. Two mechanisms have been identified for ET in DNA, a single-step tunneling process and a multistep charge-hopping process. The dynamics of tunneling reactions depend on both the distance between the electron donor and acceptor and the nature of the molecular bridge separating the donor and acceptor. In the case of protein and alkane bridges, the distance dependence is not strongly dependent on the properties of the donor and acceptor. In contrast, we show here that the distance decay of DNA ET rates varies markedly with the energetics of the donor and acceptor relative to the bridge. Specifically, we find that an increase in the energy of the bridge states by 0.25 eV (1 eV = 1.602 x 10(-19) J) relative to the donor and acceptor energies for photochemical oxidation of nucleotides, without changing the reaction free energy, results in an increase in the characteristic exponential distance decay constant for the ET rates from 0.71 to 1.1 A(-1). These results show that, in the small tunneling energy gap regime of DNA ET, the distance dependence is not universal; it varies strongly with the tunneling energy gap. These DNA ET reactions fill a "missing link" or transition regime between the large barrier (rapidly decaying) tunneling regime and the (slowly decaying) hopping regime in the general theory of bridge-mediated ET processes.