Formation of Gold Nanoclusters from Goldcarbonyl Chloride inside the Metal-Organic Framework HKUST-1.

Gas-phase infiltration of the carbonylchloridogold(I), Au(CO)Cl precursor into the pores of HKUST-1 ([Cu3(BTC)2(H2O)2], Cu-BTC) SURMOFs (surface-mounted metal-organic frameworks; BTC = benzene-1,3,5-tricarboxylate) leads to Au(CO)Cl decomposition within the MOF through hydrolysis with the aqua ligands on Cu. Small Aux clusters with an average atom number of x ≈ 5 are formed in the medium-sized pores of the HKUST-1 matrix. These gold nanoclusters are homogeneously distributed and crystallographically ordered, which was supported by simulations of the powder X-ray diffractometric characterization. Aux@HKUST-1 was further characterized by scanning electron microscopy (SEM) and infrared reflection absorption (IRRA) as well as Raman spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Thioacetate-Based Initiators for the Synthesis of Thiol-End-Functionalized Poly(2-oxazoline)s.

New functional initiators for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines are described to introduce a thiol moiety at the α terminus. Both tosylate and nosylate initiators carrying a thioacetate group are obtained in multigram scale, from commercial reagents in two steps, including a phototriggered thiol-ene radical addition. The nosylate derivative gives access to a satisfying control over the cationic ring-opening polymerization of 2-ethyl-2-oxazoline, with dispersity values lower than 1.1 during the entire course of the polymerization, until full conversion. Cleavage of the thioacetate end group is rapidly achieved using triazabicyclodecene, thereby leading to a mercapto terminus. The latter gives access to a new subgeneration of α-functional poly(2-oxazoline)s (butyl ester, N-hydroxysuccinimidyl ester, furan) by Michael addition with commercial (meth)acrylates. The amenability of the mercapto-poly(2-ethyl-2-oxazoline) for covalent surface patterning onto acrylated surfaces is demonstrated in a microchannel cantilever spotting (µCS) experiment, characterized by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary-ion mass spectrometry (ToF-SIMS).

Inverse Vulcanization of Styrylethyltrimethoxysilane-Coated Surfaces, Particles, and Crosslinked Materials.

Sulfur as a side product of natural gas and oil refining is an underused resource. Converting landfilled sulfur waste into materials merges the ecological imperative of resource efficiency with economic considerations. A strategy to convert sulfur into polymeric materials is the inverse vulcanization reaction of sulfur with alkenes. However, the materials formed are of limited applicability, because they need to be cured at high temperatures (>130 °C) for many hours. Herein, we report the reaction of elemental sulfur with styrylethyltrimethoxysilane. Marrying the inverse vulcanization and silane chemistry yielded high sulfur content polysilanes, which could be cured via room temperature polycondensation to obtain coated surfaces, particles, and crosslinked materials. The polycondensation was triggered by hydrolysis of poly(sulfur-r-styrylethyltrimethoxysilane) (poly(Sn -r-StyTMS) under mild conditions (HCl, pH 4). For the first time, an inverse vulcanization polymer could be conveniently coated and mildly cured via post-polycondensation. Silica microparticles coated with the high sulfur content polymer could improve their Hg2+ ion remediation capability.

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface-Mounted Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a "strain modulation" approach has been applied through the use of surface-mounted NiFe-MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm-2 at an overpotential of only ≈210 mV. It demonstrates operational long-term stability even at a high current density of 500 mA cm-2 and exhibits the so far narrowest "overpotential window" ΔEORR-OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.

Secondary ion mass spectrometry imaging and multivariate data analysis reveal co-aggregation patterns of Populus trichocarpa leaf surface compounds on a micrometer scale.

Spatially resolved analysis of a multitude of compound classes has become feasible with the rapid advancement in mass spectrometry imaging strategies. In this study, we present a protocol that combines high lateral resolution time-of-flight secondary ion mass spectrometry (TOF-SIMS) imaging with a multivariate data analysis (MVA) approach to probe the complex leaf surface chemistry of Populus trichocarpa. Here, epicuticular waxes (EWs) found on the adaxial leaf surface of P. trichocarpa were blotted on silicon wafers and imaged using TOF-SIMS at 10 µm and 1 µm lateral resolution. Intense M+● and M-● molecular ions were clearly visible, which made it possible to resolve the individual compound classes present in EWs. Series of long-chain aliphatic saturated alcohols (C21 -C30 ), hydrocarbons (C25 -C33 ) and wax esters (WEs; C44 -C48 ) were clearly observed. These data correlated with the 7 Li-chelation matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis, which yielded mostly molecular adduct ions of the analyzed compounds. Subsequently, MVA was used to interrogate the TOF-SIMS dataset for identifying hidden patterns on the leaf's surface based on its chemical profile. After the application of principal component analysis (PCA), a small number of principal components (PCs) were found to be sufficient to explain maximum variance in the data. To further confirm the contributions from pure components, a five-factor multivariate curve resolution (MCR) model was applied. Two distinct patterns of small islets, here termed 'crystals', were apparent from the resulting score plots. Based on PCA and MCR results, the crystals were found to be formed by C23 or C29 alcohols. Other less obvious patterns observed in the PCs revealed that the adaxial leaf surface is coated with a relatively homogenous layer of alcohols, hydrocarbons and WEs. The ultra-high-resolution TOF-SIMS imaging combined with the MVA approach helped to highlight the diverse patterns underlying the leaf's surface. Currently, the methods available to analyze the surface chemistry of waxes in conjunction with the spatial information related to the distribution of compounds are limited. This study uses tools that may provide important biological insights into the composition of the wax layer, how this layer is repaired after mechanical damage or insect feeding, and which transport mechanisms are involved in deploying wax constituents to specific regions on the leaf surface.

Exploiting λ-Orthogonal Photoligation for Layered Surface Patterning.

We exploit λ-orthogonal photoligation of nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) chemistry to generate complex, interconnected surface modifications via a simple layered surface patterning approach. By judicious choice of activating chromophores, we introduce a one pot reaction where nitrile imine formation can be triggered independently of other tetrazoles present. When irradiated with visible light, a tetrazole bearing a pyrene chromophore undergoes quantitative elimination of nitrogen to release nitrile imine (which subsequently undergoes trapping with a dipolarophile in a 1,3 dipolar cycloaddition) whereas a tetrazole bearing a phenyl moiety remains unreacted. Subsequent irradiation of the solution with UV light yields the N-phenyl containing nitrile imine quantitatively, while the pyrene pyrazoline adduct remains unchanged. This λ-orthogonal photoligation was subsequently exploited for the generation of layered patterned surfaces. Specifically, the visible light active tetrazole was grafted to a silicon wafer and subsequently photolithographically patterned with a dipolarophile modified with a UV-active tetrazole. Various electron deficient olefins were then patterned in a spatially resolved manner relying on different light activation. The desired functionality was successfully imaged on the silicon wafers using time-of-flight-secondary ion mass spectrometry (ToF-SIMS), demonstrating that a powerful mask-less lithographic platform technology has been established.

Dynamic Nitroxide Functional Materials.

A substrate-independent and versatile coating platform for (spatially resolved) surface functionalization, based on nitroxide radical coupling (NRC) reactions and the formation of thermo-labile alkoxyamine functional groups, was introduced. Nitroxide-decorated poly(glycidyl methacrylate) (PGMA) microspheres, obtained through bioinspired copolymer surface deposition using dopamine and a nitroxide functional dopamine derivative as monomers, were conjugated with small functional groups in a rewritable process. Reversible coding of the nitroxide functional microspheres by NRC and decoding through thermal alkoxyamine fission were monitored and characterized by electron paramagnetic resonance (EPR) spectroscopy and X-ray photoelectron spectroscopy (XPS). In addition, this nitroxide coating system was exploited in "grafting-to" polymer surface ligations of poly(methyl methacrylate) (PMMA) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) in spatially confined areas. Polymer strands terminated with an Irgacure 2959 (2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone) photoinitiator were obtained through chain-transfer polymerization, and subsequently coupled to nitroxide-immobilized poly(dopamine) (PDA)-coated silicon substrates by using rapid photoclick NRC reactions. Light-driven polymer surface coding was visualized by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and XPS imaging.

Dynamic Protein Adsorption onto Dendritic Polyglycerol Sulfate Self-Assembled Monolayers.

Biomaterial surfaces that are in contact with blood are often prone to unspecific protein adsorption and the activation of the blood clotting cascade. Hence, such materials usually must be functionalized with low-fouling or anticoagulant polymer coatings to increase their performance and durability with respect to various applications, for example as implants or in biomedical devices. Many coatings are based on anionic polymers, such as heparin, and are known to have pronounced anticoagulant effects. To assess the ability of a surface to prevent biofouling and to get further insight into its underlying mechanism, studies of the protein adsorption on self-assembled monolayers (SAMs) are often used as a predictive tool. In this article, we synthesized thioctic acid-functionalized dendritic polyglycerol sulfate (dPGS), which is a well-known synthetic heparin mimetic, and immobilized it onto gold model surfaces. The anionic dPGS SAMs were characterized via contact angle measurements and ellipsometry and compared to their neutral dendritic polyglycerol (dPG) counterparts with respect to their single protein adsorption of the two most abundant blood proteins albumin (Alb) and fibrinogen (Fib). In addition, we used QCM-D and ToF-SIMS as complementary techniques to investigate the dynamic, mixed, and sequential adsorption of Alb and Fib. Our results clearly demonstrate an incomplete Vroman effect and indicate the rearrangement of the adsorbed protein layers, which is presumably drive by ionic interactions between the two proteins and the anionic dPGS surface.

Reversible Surface Engineering via Nitrone-Mediated Radical Coupling.

Efficient and simple polymer conjugation reactions are critical for introducing functionalities on surfaces. For polymer surface grafting, postpolymerization modifications are often required, which can impose a significant synthetic hurdle. Here, we report two strategies that allow for reversible surface engineering via nitrone-mediated radical coupling (NMRC). Macroradicals stemming from the activation of polymers generated by copper-mediated radical polymerization are grafted via radical trapping with a surface-immobilized nitrone or a solution-borne nitrone. Since the product of NMRC coupling features an alkoxyamine linker, the grafting reactions can be reversed or chain insertions can be performed via nitroxide-mediated polymerization (NMP). Poly( n-butyl acrylate) ( Mn = 1570 g·mol-1, D̵ = 1.12) with a bromine terminus was reversibly grafted to planar silicon substrates or silica nanoparticles as successfully evidenced via X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry, and grazing angle attenuated total reflection Fourier-transform infrared spectroscopy (GAATR-FTIR). NMP chain insertions of styrene are evidenced via GAATR-FTIR. On silica nanoparticles, an NMRC grafting density of close to 0.21 chains per nm2 was determined by dynamic light scattering and thermogravimetric analysis. Concomitantly, a simple way to decorate particles with nitroxide radicals with precise control over the radical concentration is introduced. Silica microparticles and zinc oxide, barium titanate, and silicon nanoparticles were successfully functionalized.

Bioinstructive Coatings for Hematopoietic Stem Cell Expansion Based on Chemical Vapor Deposition Copolymerization.

We report the chemical vapor deposition (CVD) of dual-functional polymer films for the specific and orthogonal immobilization of two biomolecules (notch ligand delta-like 1 (DLL1) and an RGD-peptide) that govern the fate of hematopoietic stem and progenitor cells. The composition of the CVD polymer and thus the biomolecule ratio can be tailored to investigate and optimize the influence of the relative surface concentrations of biomolecules on stem cell behavior. Prior to cell experiments, all surfaces were characterized by infrared reflection adsorption spectroscopy, time-of-flight secondary ion mass spectrometry, and X-ray photoelectron spectroscopy to confirm the presence of both biomolecules. In a proof-of-principle stem cell culture study, we show that all polymer surfaces are cytocompatible and that the proliferation of the hematopoietic stem and progenitor cells is predominantly influenced by the surface concentration of immobilized DLL1.

Electrodeposition of WO3 nanoparticles into surface mounted metal-organic framework HKUST-1 thin films.

We describe a novel procedure to fabricate WO3@surface-mounted metal-organic framework (SURMOF) hybrid materials by electrodeposition of WO3 nanoparticles into HKUST-1, also termed Cu3(BTC)2 SURMOFs. These materials have been characterized using x-ray diffraction, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, x-ray photoelectron spectroscopy as well as linear sweep voltammetry. The WO3 semiconductor/SURMOF heterostructures were further tested as hybrid electrodes in their performance for hydrogen evolution reaction from water.

Organocatalyzed Photo-Atom Transfer Radical Polymerization of Methacrylic Acid in Continuous Flow and Surface Grafting.

The organocatalyzed photo-atom transfer radical polymerization (photoATRP) using 10-phenylphenothiazine as catalyst is studied toward its use in methacrylic acid (MAA) polymerization and surface grafting. The organocatalyzed photoATRP of methyl methacrylate (MMA) is first optimized for continuous flow synthesis in order to assess the livingness of the polymerization. MMA can be polymerized in batch and in flow; however, conversions are limited by the loss of bromine functionality and hence high conversions have to be traded in with increasing dispersities. Also, MAA is polymerized successfully in continuous flow with similar limitations. Flow conditions are transferred to surface grafting from silanized silicon wafers. The presence of ATRP initiators after silanization is confirmed by secondary ion mass spectrometry and X-ray photoelectron spectroscopy. Dense polymethacrylic acid brush films are successfully produced, which is not directly accessible via classical copper-mediated ATRP techniques.

Single-Molecule Encapsulation: A Straightforward Route to Highly Stable and Printable Enzymes.

A mild, fast, and sequence-independent method for controlled enzyme immobilization is presented. This novel approach involves the encapsulation of single-enzyme molecules and the covalent attachment of these nanobiocatalysts onto surfaces. Fast and mild immobilization conditions, combined with low nonspecific adsorption on hydrophobic substrates, enables well-defined surface patterns via microcontact printing. The biohybrid materials show enhanced activity in organic solvents.

Calcium Silicate Phases Explained by High-Temperature-Resistant Phosphate Probe Molecules.

In this work, high-temperature-resistant phosphate molecules are applied to characterize ultrathin (100 nm) calcium silicate (C-S) phases. These C-S phases are synthesized on silicon wafers, and the interaction of phosphates with the C-S phases is studied by means of in situ transmission Fourier transform infrared (FTIR) spectroscopy. At room temperature, the chemistry of the system is dominated by the formation of calcium phosphates (C-P). In the case of temperature rising to 1000 °C, the C-S phases are regenerated. FTIR results are analyzed on the basis of first-principles calculations and further supported by complementary time-of-flight secondary ion mass spectrometry (ToF-SIMS) experiments. This study provides a detailed and self-consistent picture of the chemical and structural properties of interfaces such as the one between the atmosphere and ultrathin C-S phases (gas/C-S) and the one between them and silicon wafers (C-S/Si bulk). The material combination of ultrathin C-S phases grown on silicon wafers might in the future have great potential in selective chemistry, catalysis, and sensing technology as well as in semiconductor manufacturing.

Reactive superhydrophobic surface and its photoinduced disulfide-ene and thiol-ene (bio)functionalization.

Reactive superhydrophobic surfaces are highly promising for biotechnological, analytical, sensor, or diagnostic applications but are difficult to realize due to their chemical inertness. In this communication, we report on a photoactive, inscribable, nonwettable, and transparent surface (PAINTS), prepared by polycondensation of trichlorovinylsilane to form thin transparent reactive porous nanofilament on a solid substrate. The PAINTS shows superhydrophobicity and can be conveniently functionalized with the photoclick thiol-ene reaction. In addition, we show for the first time that the PAINTS bearing vinyl groups can be easily modified with disulfides under UV irradiation. The effect of superhydrophobicity of PAINTS on the formation of high-resolution surface patterns has been investigated. The developed reactive superhydrophobic coating can find applications for surface biofunctionalization using abundant thiol or disulfide bearing biomolecules, such as peptides, proteins, or antibodies.

UV-Induced Disulfide Formation and Reduction for Dynamic Photopatterning.

UV-induced disulfide formation (UV-DF) and disulfide reduction (UV-DR) reactions for surface functionalization and dynamic photopatterning are presented. Both photochemical reactions allow for the spatially and temporally controlled, reversible transition between thiol- and disulfide-functionalized surfaces. The dynamic photopatterning strategy was demonstrated by the UV-induced attachment, exchange, and detachment on thiol-modified substrates.

Bottom-Up Fabrication of Nanopatterned Polymers on DNA Origami by In†Situ Atom-Transfer Radical Polymerization.

Bottom-up strategies to fabricate patterned polymers at the nanoscale represent an emerging field in the development of advanced nanodevices, such as biosensors, nanofluidics, and nanophotonics. DNA origami techniques provide access to distinct architectures of various sizes and shapes and present manifold opportunities for functionalization at the nanoscale with the highest precision. Herein, we conduct in situ atom-transfer radical polymerization (ATRP) on DNA origami, yielding differently nanopatterned polymers of various heights. After cross-linking, the grafted polymeric nanostructures can even stably exist in solution without the DNA origami template. This straightforward approach allows for the fabrication of patterned polymers with low nanometer resolution, which provides access to unique DNA-based functional hybrid materials.

Simultaneous Dual Encoding of Three-Dimensional Structures by Light-Induced Modular Ligation.

A highly efficient strategy for the simultaneous dual surface encoding of 2D and 3D microscaffolds is reported. The combination of an oligo(ethylene glycol)-based network with two novel and readily synthesized monomers with photoreactive side chains yields two new photoresists, which can be used for the fabrication of microstructures (by two-photon polymerization) that exhibit a dual-photoreactive surface. By combining both functional photoresists into one scaffold, a dual functionalization pattern can be obtained by a single irradiation step in the presence of adequate reaction partners based on a self-sorting mechanism. The versatility of the approach is shown by the dual patterning of halogenated and fluorescent markers as well as proteins. Furthermore, we introduce a new ToF-SIMS mode ("delayed extraction") for the characterization of the obtained microstructures that combines high mass resolution with improved lateral resolution.

Photolithographic Encoding of Metal Complexes.

A platform technology for the creation of spatially resolved surfaces encoded with a monolayer consisting of different metal complexes was developed. The concept entails the light-triggered activation of a self- assembled monolayer (SAM) of UV-labile anchors, that is, phenacylsulfides, and the subsequent cycloaddition of selected diene-functionalized metal complexes at defined areas on the surface. The synthesis and characterization of the metal complexes for the UV-light assisted anchoring on the surface and a detailed study of a short-chain oligomer model system in solution confirm the high efficiency of the photoreaction. The hybrid materials obtained by this concept can potentially be utilized for the design of highly valuable catalytic or (opto-)electronic devices.

A photolithographic approach to spatially resolved cross-linked nanolayers.

The preparation of cross-linked nanosheets with 1-2 nm thickness and predefined shape was achieved by lithographic immobilization of trimethacryloyl thioalkanoates onto the surface of Si wafers, which were functionalized with 2-(phenacylthio)acetamido groups via a photoinduced reaction. Subsequent cross-linking via free radical polymerization as well as a phototriggered Diels-Alder reaction under mild conditions on the surface led to the desired nanosheets. Electrospray ionization mass spectrometry (ESI-MS), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), as well as infrared reflection-absorption spectroscopy (IRRAS) confirmed the success of individual surface-modification and cross-linking reactions. The thickness and lateral size of the cross-linked structures were determined by atomic force microscopy (AFM) for samples prepared on Si wafers functionalized with a self-assembled monolayer of 1H,1H,2H,2H-perfluorodecyl groups bearing circular pores obtained via a polymer blend lithographic approach, which led to the cross-linking reactions occurring in circular nanoareas (diameter of 50-640 nm) yielding an average thickness of 1.2 nm (radical cross-linking), 1.8 nm (radical cross-linking in the presence of 2,2,2-trifluoroethyl methacrylate as a comonomer), and 1.1 nm (photochemical cross-linking) of the nanosheets.