RESUMO
Astrocytes that reside in superficial (SL) and deep cortical layers have distinct molecular profiles and morphologies, which may underlie specific functions. Here, we demonstrate that the production of SL and deep layer (DL) astrocyte populations from neural progenitor cells in the mouse is temporally regulated. Lineage tracking following in utero and postnatal electroporation with PiggyBac (PB) EGFP and birth dating with EdU and FlashTag, showed that apical progenitors produce astrocytes during late embryogenesis (E16.5) that are biased to the SL, while postnatally labeled (P0) astrocytes are biased to the DL. In contrast, astrocytes born during the predominantly neurogenic window (E14.5) showed a random distribution in the SL and DL. Of interest, E13.5 astrocytes birth dated at E13.5 with EdU showed a lower layer bias, while FT labeling of apical progenitors showed no bias. Finally, examination of the morphologies of "biased" E16.5- and P0-labeled astrocytes demonstrated that E16.5-labeled astrocytes exhibit different morphologies in different layers, while P0-labeled astrocytes do not. Differences based on time of birth are also observed in the molecular profiles of E16.5 versus P0-labeled astrocytes. Altogether, these results suggest that the morphological, molecular, and positional diversity of cortical astrocytes is related to their time of birth from ventricular/subventricular zone progenitors.
Assuntos
Astrócitos , Córtex Cerebral , Células-Tronco Neurais , Animais , Astrócitos/metabolismo , Astrócitos/citologia , Córtex Cerebral/citologia , Córtex Cerebral/metabolismo , Células-Tronco Neurais/metabolismo , Células-Tronco Neurais/citologia , Camundongos , Camundongos Transgênicos , Feminino , Animais Recém-Nascidos , Regulação da Expressão Gênica no Desenvolvimento , Transcriptoma , Proteínas de Fluorescência Verde/genética , Proteínas de Fluorescência Verde/metabolismo , Ventrículos Cerebrais/citologia , Camundongos Endogâmicos C57BLRESUMO
Single-cell proteomics is emerging as an important subfield in the proteomics and mass spectrometry communities, with potential to reshape our understanding of cell development, cell differentiation, disease diagnosis, and the development of new therapies. Compared with significant advancements in the "hardware" that is used in single-cell proteomics, there has been little work comparing the effects of using different "software" packages to analyze single-cell proteomics datasets. To this end, seven popular proteomics programs were compared here, applying them to search three single-cell proteomics datasets generated by three different platforms. The results suggest that MSGF+, MSFragger, and Proteome Discoverer are generally more efficient in maximizing protein identifications, that MaxQuant is better suited for the identification of low-abundance proteins, that MSFragger is superior in elucidating peptide modifications, and that Mascot and X!Tandem are better for analyzing long peptides. Furthermore, an experiment with different loading amounts was carried out to investigate changes in identification results and to explore areas in which single-cell proteomics data analysis may be improved in the future. We propose that this comparative study may provide insight for experts and beginners alike operating in the emerging subfield of single-cell proteomics.
Assuntos
Proteômica , Espectrometria de Massas em Tandem , Proteômica/métodos , Espectrometria de Massas em Tandem/métodos , Ferramenta de Busca/métodos , Software , Proteoma/análise , Bases de Dados de ProteínasRESUMO
Proteome profiles of precious tissue samples have great clinical potential for accelerating disease biomarker discovery and promoting novel strategies for early diagnosis and treatment. However, tiny clinical tissue samples are often difficult to handle and analyze with conventional proteomic methods. Automated digital microfluidic (DMF) workflows facilitate the manipulation of size-limited tissue samples. Here, we report the assessment of a DMF microproteomics workflow enabled by a photocleavable surfactant for proteomic analysis of minute tissue samples. The surfactant 4-hexylphenylazosulfonate (Azo) was found to facilitate fast droplet movement on DMF and enhance the proteomics analysis. Comparisons of Azo and n-Dodecyl ß-d-maltoside (DDM) using small samples of HeLa digest standards and MCF-7 cell digests revealed distinct differences at the peptide level despite similar results at the protein level. The DMF microproteomics workflow was applied for the sample preparation of â¼3 µg biopsies from murine brain tissue. A total of 1969 proteins were identified in three samples, including established neural biomarkers and proteins related to synaptic signaling. Going forward, we propose that the Azo-enabled DMF workflow has the potential to advance the practical clinical application of DMF for the analysis of size-limited tissue samples.
RESUMO
Toxicity testing is currently undergoing a paradigm shift from examining apical end points such as death, to monitoring sub-lethal toxicity in vivo. In vivo nuclear magnetic resonance (NMR) spectroscopy is a key platform in this endeavor. A proof-of-principle study is presented which directly interfaces NMR with digital microfluidics (DMF). DMF is a "lab on a chip" method allowing for the movement, mixing, splitting, and dispensing of µL-sized droplets. The goal is for DMF to supply oxygenated water to keep the organisms alive while NMR detects metabolomic changes. Here, both vertical and horizontal NMR coil configurations are compared. While a horizontal configuration is ideal for DMF, NMR performance was found to be sub-par and instead, a vertical-optimized single-sided stripline showed most promise. In this configuration, three organisms were monitored in vivo using 1H-13C 2D NMR. Without support from DMF droplet exchange, the organisms quickly showed signs of anoxic stress; however, with droplet exchange, this was completely suppressed. The results demonstrate that DMF can be used to maintain living organisms and holds potential for automated exposures in future. However, due to numerous limitations of vertically orientated DMF, along with space limitations in standard bore NMR spectrometers, we recommend future development be performed using a horizontal (MRI style) magnet which would eliminate practically all the drawbacks identified here.
Assuntos
Imageamento por Ressonância Magnética , Microfluídica , Espectroscopia de Ressonância Magnética/métodos , Metabolômica/métodos , Dispositivos Lab-On-A-ChipRESUMO
The rapid development of micromanipulation technologies has opened exciting new opportunities for the actuation, selection and assembly of a variety of non-biological and biological nano/micro-objects for applications ranging from microfabrication, cell analysis, tissue engineering, biochemical sensing, to nano/micro-machines. To date, a variety of precise, flexible and high-throughput manipulation techniques have been developed based on different physical fields. Among them, optoelectronic tweezers (OET) is a state-of-art technique that combines light stimuli with electric field together by leveraging the photoconductive effect of semiconductor materials. Herein, the behavior of micro-objects can be directly controlled by inducing the change of electric fields on demand in an optical manner. Relying on this light-induced electrokinetic effect, OET offers tremendous advantages in micromanipulation such as programmability, flexibility, versatility, high-throughput and ease of integration with other characterization systems, thus showing impressive performance compared to those of many other manipulation techniques. A lot of research on OET have been reported in recent years and the technology has developed rapidly in various fields of science and engineering. This work provides a comprehensive review of the OET technology, including its working mechanisms, experimental setups, applications in non-biological and biological scenarios, technology commercialization and future perspectives.
Assuntos
Micromanipulação , Semicondutores , Micromanipulação/métodos , Eletricidade , Pinças ÓpticasRESUMO
Microrobotics extends the reach of human-controlled machines to submillimeter dimensions. We introduce a microrobot that relies on optoelectronic tweezers (OET) that is straightforward to manufacture, can take nearly any desirable shape or form, and can be programmed to carry out sophisticated, multiaxis operations. One particularly useful program is a serial combination of "load," "transport," and "deliver," which can be applied to manipulate a wide range of micrometer-dimension payloads. Importantly, microrobots programmed in this manner are much gentler on fragile mammalian cells than conventional OET techniques. The microrobotic system described here was demonstrated to be useful for single-cell isolation, clonal expansion, RNA sequencing, manipulation within enclosed systems, controlling cell-cell interactions, and isolating precious microtissues from heterogeneous mixtures. We propose that the optoelectronic microrobotic system, which can be implemented using a microscope and consumer-grade optical projector, will be useful for a wide range of applications in the life sciences and beyond.
Assuntos
Micromanipulação/instrumentação , Robótica/instrumentação , Análise de Célula Única/instrumentação , Eletrônica/instrumentação , Eletrônica/métodos , Humanos , Células MCF-7 , Microfluídica/instrumentação , Microfluídica/métodos , Micromanipulação/métodos , Imagem Óptica/instrumentação , Imagem Óptica/métodos , Robótica/métodos , Análise de Célula Única/métodosRESUMO
The rectification of ion transport through biological ion channels has attracted much attention and inspired the thriving invention and applications of ionic diodes. However, the development of high-performance ionic diodes is still challenging, and the working mechanisms of ionic diodes constructed by 1D ionic nanochannels have not been fully understood. This work reports the systematic investigation of the design and mechanism of a new type of ionic diode constructed from horizontally aligned multi-walled carbon nanotubes (MWCNTs) with oppositely charged polyelectrolytes decorated at their two entrances. The major design and working parameters of the MWCNT-based ionic diode, including the ion channel size, the driven voltage, the properties of working fluids, and the quantity and length of charge modification, are extensively investigated through numerical simulations and/or experiments. An optimized ionic current rectification (ICR) ratio of 1481.5 is experimentally achieved on the MWCNT-based ionic diode. These results promise potential applications of the MWCNT-based ionic diode in biosensing and biocomputing. As a proof-of-concept, DNA detection and HIV-1 diagnosis is demonstrated on the ionic diode. This work provides a comprehensive understanding of the working principle of the MWCNT-based ionic diodes and will allow rational device design and optimization.
Assuntos
Nanotubos de Carbono , DNA , Transporte de Íons , Íons , PolieletrólitosRESUMO
Micromanipulation techniques that are capable of assembling nano/micromaterials into usable structures such as topographical micropatterns (TMPs) have proliferated rapidly in recent years, holding great promise in building artificial electronic and photonic microstructures. Here, a method is reported for forming TMPs based on optoelectronic tweezers in either "bottom-up" or "top-down" modes, combined with in situ photopolymerization to form permanent structures. This work demonstrates that the assembled/cured TMPs can be harvested and transferred to alternate substrates, and illustrates that how permanent conductive traces and capacitive circuits can be formed, paving the way toward applications in microelectronics. The integrated, optical assembly/preservation method described here is accessible, versatile, and applicable for a wide range of materials and structures, suggesting utility for myriad microassembly and microfabrication applications in the future.
Assuntos
Micromanipulação , Óptica e Fotônica , Eletrônica , FótonsRESUMO
BACKGROUND: Blood typing, donor compatibility testing, and hematocrit analysis are common tests that are important in many clinical applications, including those found in high-stakes settings such as the trauma center. These tests are typically performed in centralized laboratories with sample batching; the minutes that are lost in this mode can lead to adverse outcomes, especially for critical-care patients. As a step toward providing rapid results at the bedside, we developed a point-of-care hemagglutination system relying on digital microfluidics (DMF) and a unique, automated readout tool, droplet agglutination assessment using digital microfluidics (DAAD). METHODS: ABO and Rhesus blood grouping, donor crossmatching, and hematocrit assays were developed on a portable DMF platform that allowed for automated sample processing. The result of each assay could be determined by eye or automatically with the DAAD imaging tool. RESULTS: DMF-DAAD was applied to 109 samples collected from different sources (including commercial samples, pinpricks from volunteers, and a hospital blood bank), with perfect fidelity to gold-standard results. Some of these tests were carried out by a nonexpert in a hospital trauma center. Proof-of-concept results were also collected from smaller sample sets for donor compatibility testing and hematocrit analysis. CONCLUSION: DMF-DAAD shows promise for delivering rapid, reliable results in a format well suited for a trauma center and other settings where every minute counts.
Assuntos
Tipagem e Reações Cruzadas Sanguíneas , Microfluídica , Bancos de Sangue , Hemaglutinação , Hematócrito , Humanos , Microfluídica/métodosRESUMO
Distance-based detection methods, as used in development of microfluidic paper analytical devices (µPADs), rely on the dynamic formation of a colored band along the length of the paper microfluidic channels. The color change is driven by the reaction of chromogenic reagents (typically water-insoluble) that are bound to the paper, thus not subject to being washed away by the sample flow along the detection channel. Here, we introduce the use of an anion-exchange filter paper (as a replacement for standard, unmodified filter paper) for distance-based detection in µPADs, in order to immobilize the water-soluble anionic reagents upon the paper detection channels based on ion-exchange interactions of the oppositely charged paper (protonated tertiary amine groups) and the anionic groups of the reagents. The ion-exchange (IE) paper was initially characterized and its properties were compared with standard cellulose paper. The IE paper was shown to be capable of strong retention of anionic reagents exhibiting acidic functional groups (carboxylic, sulfonic), which become deprotonated and negatively charged when in contact with the IE paper. The effect of the ionic strength (10-250 mM Cl-) and pH (1-13) on the immobilization of the investigated reagents were also determined. The IE-µPADs were then modified with anionic chromogenic reagents and applied to distance-based determination of total calcium (LOD = 0.03 mM) and total acidity (LOD = 2.5 mM) content in serum and wine samples, respectively. The detailed mechanisms of the developed assays on the IE paper are also discussed. We propose that IE-µPADs represent a useful new addition to the distance-based detection toolbox and considerably enhance the applicability of such a detection method.
RESUMO
Digital microfluidics (DMF) is a platform that enables highly reconfigurable and automated fluidic operations using a generic device architecture. A unique hallmark of DMF is its "flexibility": a generic device design can be used and reused for many different, divergent fluidic operations. The flexibility of DMF is compromised when devices are permanently modified with embedded sensors. Here we introduce a solution to the "flexibility gap" between fluidic operations in digital microfluidics and embedded sensors: "plug-n-play DMF" (PnP-DMF). In PnP-DMF, devices are designed to allow for rapid and seamless exchange of sensors depending on the application needs. This paper provides "proof of concept" for PnP-DMF using commercial biosensors for glucose and ß-ketone, a custom paper-based electrochemical sensor for lactate, and a generic screen-printed electroanalytical cell. We demonstrate that hot-swapping sensors between experiments allows for convenient implementation of complex processes such as automated analysis of blood samples by standard addition. Finally, we explored the suitability for using PnP sensors in tandem with other sensing modalities, combining biosensor-based electrochemical measurement of glucose with a chemiluminescent magnetic bead-based sandwich immunoassay for insulin. The latter is notable, as it constitutes the first report of an analysis of different analytes in both the supernatant and precipitate from a single sample-aliquot in a microfluidic device. The results presented here highlight the versatility of PnP-DMF, illustrating how it may be useful for a wide range of applications in diagnostics and beyond.
RESUMO
In this work, we investigated the use of optoelectronic tweezers (OET) to manipulate objects that are larger than those commonly positioned with standard optical tweezers. We studied the forces that could be produced on differently sized polystyrene microbeads and MCF-7 breast cancer cells with light-induced dielectrophoresis (DEP). It was found that the DEP force imposed on the bead/cell did not increase linearly with the volume of the bead/cell, primarily because of the non-uniform distribution of the electric field above the OET bottom plate. Although this size-scaling work focuses on microparticles and cells, we propose that the physical mechanism elucidated in this research will be insightful for other micro-objects, biological samples, and micro-actuators undergoing OET manipulation.
Assuntos
Eletricidade , Microesferas , Pinças Ópticas , Desenho de Equipamento , Humanos , Células MCF-7 , Poliestirenos/químicaRESUMO
In digital microfluidics, discrete droplets of fluid are made to move on an open surface with no microchannels. These systems are commonly operated by application of electrical driving forces to an array of electrodes. While these driving forces are well characterized, the dissipative forces opposing droplet movement have not been as thoroughly examined. In recognition of this deficit, we used force-velocity plots to characterize droplet movement in digital microfluidics, which was found to be consistent with a simple theoretical framework for understanding dissipation effects for droplets in two-plate, air-filled devices. Interestingly, in some conditions, a previously unreported â³velocity saturationâ³ effect was observed. When examined across a range of different liquids, the forces at which this saturation occurs seem to be lower for liquids with smaller surface tensions. Furthermore, when driven at forces that cause saturation, physical phenomena are observed that are akin to what has been reported for stationary droplets in the electrowetting literature. These phenomena are detrimental to device performance, leading to a new "force window" approach that delineates the optimum operation conditions for different liquids. We propose that these findings may be useful for a wide range of applications for experts and new users alike in this growing field.
RESUMO
Microcoil nuclear magnetic resonance (NMR) has been interfaced with digital microfluidics (DMF) and is applied to monitor organic reactions in organic solvents as a proof of concept. DMF permits droplets to be moved and mixed inside the NMR spectrometer to initiate reactions while using sub-microliter volumes of reagent, opening up the potential to follow the reactions of scarce or expensive reagents. By setting up the spectrometer shims on a reagent droplet, data acquisition can be started immediately upon droplet mixing and is only limited by the rate at which NMR data can be collected, allowing the monitoring of fast reactions. Here we report a cyclohexene carbonate hydrolysis in dimethylformamide and a Knoevenagel condensation in methanol/water. This is to our knowledge the first time rapid organic reactions in organic solvents have been monitored by high field DMF-NMR. The study represents a key first step towards larger DMF-NMR arrays that could in future serve as discovery platforms, where computer controlled DMF automates mixing/titration of chemical libraries and NMR is used to study the structures formed and kinetics in real time.
RESUMO
Optical micromanipulation has become popular for a wide range of applications. In this work, a new type of optical micromanipulation platform, patterned optoelectronic tweezers (p-OET), is introduced. In p-OET devices, the photoconductive layer (that is continuous in a conventional OET device) is patterned, forming regions in which the electrode layer is locally exposed. It is demonstrated that micropatterns in the photoconductive layer are useful for repelling unwanted particles/cells, and also for keeping selected particles/cells in place after turning off the light source, minimizing light-induced heating. To clarify the physical mechanism behind these effects, systematic simulations are carried out, which indicate the existence of strong nonuniform electric fields at the boundary of micropatterns. The simulations are consistent with experimental observations, which are explored for a wide variety of geometries and conditions. It is proposed that the new technique may be useful for myriad applications in the rapidly growing area of optical micromanipulation.
Assuntos
Micromanipulação/métodos , Pinças Ópticas , Animais , Separação Celular , HumanosRESUMO
Optoelectronic tweezers (OET) are a microsystem actuation technology capable of moving microparticles at mm s-1 velocities with nN forces. In this work, we analyze the behavior of particles manipulated by negative dielectrophoresis (DEP) forces in an OET trap. A user-friendly computer interface was developed to generate a circular rotating light pattern to control the movement of the particles, allowing their force profiles to be conveniently measured. Three-dimensional simulations were carried out to clarify the experimental results, and the DEP forces acting on the particles were simulated by integrating the Maxwell stress tensor. The simulations matched the experimental results and enabled the determination of a new "hopping" mechanism for particle-escape from the trap. As indicated by the simulations, there exists a vertical DEP force at the edge of the light pattern that pushes up particles to a region with a smaller horizontal DEP force. We propose that this phenomenon will be important to consider for the design of OET micromanipulation experiments for a wide range of applications.
RESUMO
Isaac Newton famously observed that "if I have seen further it is by standing on the shoulders of giants." We propose that this sentiment is a powerful motivation for the "open-source" movement in scientific research, in which creators provide everything needed to replicate a given project online, as well as providing explicit permission for users to use, improve, and share it with others. Here, we write to introduce analytical chemists who are new to the open-source movement to best practices and concepts in this area and to survey the state of open-source research in analytical chemistry. We conclude by considering two examples of open-source projects from our own research group, with the hope that a description of the process, motivations, and results will provide a convincing argument about the benefits that this movement brings to both creators and users.
RESUMO
We report the fabrication of a scaffold (hereafter referred to as AngioChip) that supports the assembly of parenchymal cells on a mechanically tunable matrix surrounding a perfusable, branched, three-dimensional microchannel network coated with endothelial cells. The design of AngioChip decouples the material choices for the engineered vessel network and for cell seeding in the parenchyma, enabling extensive remodelling while maintaining an open-vessel lumen. The incorporation of nanopores and micro-holes in the vessel walls enhances permeability, and permits intercellular crosstalk and extravasation of monocytes and endothelial cells on biomolecular stimulation. We also show that vascularized hepatic tissues and cardiac tissues engineered by using AngioChips process clinically relevant drugs delivered through the vasculature, and that millimetre-thick cardiac tissues can be engineered in a scalable manner. Moreover, we demonstrate that AngioChip cardiac tissues implanted with direct surgical anastomosis to the femoral vessels of rat hindlimbs establish immediate blood perfusion.
Assuntos
Materiais Biocompatíveis/química , Células Endoteliais da Veia Umbilical Humana/metabolismo , Dispositivos Lab-On-A-Chip , Fígado/metabolismo , Monócitos/metabolismo , Miocárdio/citologia , Engenharia Tecidual , Alicerces Teciduais/química , Anastomose Cirúrgica , Animais , Fêmur/irrigação sanguínea , Fêmur/citologia , Fêmur/metabolismo , Células Endoteliais da Veia Umbilical Humana/citologia , Humanos , Fígado/irrigação sanguínea , Fígado/citologia , Monócitos/citologia , Miocárdio/metabolismo , Porosidade , Ratos , Ratos Endogâmicos Lew , Engenharia Tecidual/instrumentação , Engenharia Tecidual/métodosRESUMO
Immunoprecipitation (IP) is a common method for isolating a targeted protein from a complex sample such as blood, serum, or cell lysate. In particular, IP is often used as the primary means of target purification for the analysis by mass spectrometry of novel biologically derived pharmaceuticals, with particular utility for the identification of molecules bound to a protein target. Unfortunately, IP is a labor-intensive technique, is difficult to perform in parallel, and has limited options for automation. Furthermore, the technique is typically limited to large sample volumes, making the application of IP cleanup to precious samples nearly impossible. In recognition of these challenges, we introduce a method for performing microscale IP using magnetic particles and digital microfluidics (DMF-IP). The new method allows for 80% recovery of model proteins from approximately microliter volumes of serum in a sample-to-answer run time of approximately 25 min. Uniquely, analytes are eluted from these small samples in a format compatible with direct analysis by mass spectrometry. To extend the technique to be useful for large samples, we also developed a macro-to-microscale interface called preconcentration using liquid intake by paper (P-CLIP). This technique allows for efficient analysis of samples >100× larger than are typically processed on microfluidic devices. As described herein, DMF-IP and P-CLIP-DMF-IP are rapid, automated, and multiplexed methods that have the potential to reduce the time and effort required for IP sample preparations with applications in the fields of pharmacy, biomarker discovery, and protein biology.
RESUMO
Digital microfluidics (DMF) is a droplet-based liquid-handling technology that has recently become popular for cell culture and analysis. In DMF, picoliter- to microliter-sized droplets are manipulated on a planar surface using electric fields, thus enabling software-reconfigurable operations on individual droplets, such as move, merge, split, and dispense from reservoirs. Using this technique, multistep cell-based processes can be carried out using simple and compact instrumentation, making DMF an attractive platform for eventual integration into routine biology workflows. In this review, we summarize the state-of-the-art in DMF cell culture, and describe design considerations, types of DMF cell culture, and cell-based applications of DMF.