RESUMO
Poly(ethylene oxide) has been widely investigated as a potential separator for solid-state lithium metal batteries. However, its applications were significantly restricted by low ionic conductivity and a narrow electrochemical stability window (<4.0 V vs Li/Li+) at room temperature. Herein, a novel molecular self-assembled ether-based polyrotaxane electrolyte was designed using different functional units and prepared by threading cyclic 18-crown ether-6 (18C6) to linear poly(ethylene glycol) (PEG) via intermolecular hydrogen bond and terminating with hexamethylene diisocyanate trimer (HDIt), which was strongly confirmed by local structure-sensitive solid/liquid-state nuclear magnetic resonance (NMR) techniques. The designed electrolyte has shown an obviously increased room-temperature ionic conductivity of 3.48 × 10-4 S cm-1 compared to 1.12 × 10-5 S cm-1 without assembling polyrotaxane functional units, contributing to the enhanced cycling stability of batteries with both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathode materials. This advanced molecular self-assembled strategy provides a new paradigm in designing solid polymer electrolytes with demanded performance for lithium metal batteries.
RESUMO
PURPOSE: To evaluate the correlation between the degree of preoperative contralateral foraminal stenosis(CFS) and the incidence of contralateral root symptoms after unilateral transforaminal lumbar interbody fusion(TLIF) and to evaluate the appropriate candidate of preventive decompression according to the degree of preoperative contralateral foraminal stenosis. METHODS: An ambispective cohort study was conducted to investigate the incidence of contralateral root symptoms after unilateral transforaminal lumbar interbody fusion (TLIF) and the effectiveness of preventive decompression. A total of 411 patients were included in the study, all of whom met the inclusion and exclusion criteria and underwent surgery at the Department of Spinal Surgery, Ningbo Sixth Hospital, between January 2017 and February 2021. The study was divided into two groups: retrospective cohort study A and prospective cohort study B. The 187 patients included in study A from January 2017 to January 2019 did not receive preventive decompression. They were divided into four groups based on the degree of preoperative contralateral intervertebral foramen stenosis: no stenosis group A1, mild stenosis group A2, moderate stenosis group A3, and severe stenosis group A4. A Spearman rank correlation analysis was used to evaluate the correlation between the preoperative contralateral foramen stenosis degree and the incidence of contralateral root symptoms after unilateral TLIF. From February 2019 to February 2021, 224 patients were included in the prospective cohort group B. The decision to perform preventive decompression during the operation was based on the degree of preoperative contralateral foramen stenosis. Severe intervertebral foramen stenosis was treated with preventive decompression as group B1, while the rest were not treated with preventive decompression as group B2. The baseline data, surgical-related indicators, the incidence of contralateral root symptoms, clinical efficacy, imaging results, and other complications were compared between group A4 and group B1. RESULTS: All 411 patients completed the operation and were followed up for an average of 13.5 ± 2.8 months. In the retrospective study, there was no significant difference in baseline data among the four groups (P > 0.05). The incidence of postoperative contralateral root symptoms increased gradually, and a weak positive correlation was found between the degree of preoperative intervertebral foramen stenosis and the incidence of postoperative root symptoms (rs = 0.304, P < 0.001). In the prospective study, there was no significant difference in baseline data between the two groups. The operation time and blood loss in group A4 were less than those in group B1 (P < 0.05). The incidence of contralateral root symptoms in group A4 was higher than that in group B1 (P = 0.003). However, there was no significant difference in leg VAS score and ODI index between the two groups at 3 months after the operation (P > 0.05). There was no significant difference in cage position, intervertebral fusion rate, and lumbar stability between the two groups (P > 0.05). No incisional infection occurred after the operation. No pedicle screw loosening, displacement, fracture, or interbody fusion cage displacement occurred during follow-up. CONCLUSION: This study found a weak positive correlation between the degree of preoperative contralateral foramen stenosis and the incidence of contralateral root symptoms after unilateral TLIF. Intraoperative preventive decompression of the contralateral side may prolong the operation time and increase intraoperative blood loss to some extent. However, when the contralateral intervertebral foramen stenosis reaches the severe level, it is recommended to perform preventive decompression during the operation. This approach can reduce the incidence of postoperative contralateral root symptoms while ensuring clinical efficacy.
Assuntos
Vértebras Lombares , Fusão Vertebral , Humanos , Estudos Retrospectivos , Estudos Prospectivos , Estudos de Coortes , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Fusão Vertebral/efeitos adversos , Fusão Vertebral/métodos , Resultado do Tratamento , Procedimentos Cirúrgicos Minimamente Invasivos/métodosRESUMO
PURPOSE: To analyze the risk factors of contralateral symptomatic foraminal stenosis (FS) after unilateral transforaminal lumbar interbody fusion (TLIF) and to guide and standardize the operation process of unilateral TLIF to reduce the occurrence of contralateral symptomatic FS. METHODS: A retrospective study was undertaken on 487 patients with lumbar degeneration who underwent unilateral TLIF in the Department of Spinal Surgery of Ningbo Sixth Hospital between January 2017 and January 2021, comprising 269 males and 218 females, with a mean age of 57.1 years (range, 48-77 years). Cases of intraoperative improper operations, such as screw deviation, postoperative hematoma, and contralateral disc herniation, were excluded, and cases of nerve root symptoms caused by contralateral FS were analyzed. Post-surgery, 23 patients with nerve root symptoms caused by contralateral FS were categorized as group A, and 60 patients without nerve root symptoms were randomly selected as group B during the same period. The general data (gender, age, body mass index (BMI), bone mineral density (BMD), and diagnosis) and imaging parameters before and after operation (including contralateral foramen area (CFA), lumbar lordosis angle (LL), segmental lordosis angle (SL), disc height (DH), foramen height (FH), foramen width (FW), fusion cage position, and the difference between postoperative and preoperative) were compared between the two groups. Univariate analysis was performed, and multivariate analysis was undertaken through logistics analysis to determine the independent risk factors. Additionally, the clinical outcomes of the two groups were compared immediately before surgery and one year after surgery, using the visual analogue scale (VAS) score and the Japanese Orthopaedic Association (JOA) score for evaluation. RESULTS: The patients in this study were followed up for a period of 19-25 (22.8atien months. Among them, 23 cases (4.72% incidence) were diagnosed with contralaterally symptomatic FS after the surgery. Univariate analysis indicated significant differences between the two groups in CFA, SL, FW, and cage coronal position. Logistic regression analysis identified preoperative contralateral foramen area (OR = 1.176, 95% CI (1.012, 1.367)), small segmental lordosis angle (OR = 2.225, 95% CI (1.124, 4.406)), small intervertebral foramen width (OR = 2.706, 95% CI (1.028, 7.118)), and cage coronal position not crossing the midline (OR = 1.567, 95% CI (1.142, 2.149)) as independent risk factors for contralateral symptomatic FS after unilateral TLIF. However, there was no statistically significant difference in the pain VAS score between the two groups one year after the operation. In contrast, there was a significant difference in the JOA score between the two groups. CONCLUSION: The identified risk factors for contralateral symptomatic FS after TLIF include preoperative contralateral intervertebral foramen stenosis, a small segmental lordosis angle, a small intervertebral foramen width, and the coronal position of the cage not crossing the midline. For patients with these risk factors, it is recommended to carefully lock the screw rod during the recovery of lumbar lordosis and ensure that the coronal position of the fusion cage is implanted beyond the midline. If necessary, preventive decompression should also be considered. However, this study did not quantify the imaging data for each risk factor, and further research is needed to improve our understanding of the topic.
Assuntos
Lordose , Fusão Vertebral , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Constrição Patológica/etiologia , Lordose/etiologia , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Procedimentos Cirúrgicos Minimamente Invasivos , Estudos Retrospectivos , Fatores de Risco , Fusão Vertebral/efeitos adversos , Fusão Vertebral/métodos , Resultado do Tratamento , IdosoRESUMO
The utilization of compounds from natural sources to prepare functional materials is of great importance. Herein, we describe for the first time the preparation of organic-inorganic hybrid catalysts by using natural phytic acid as building block. Zirconium phosphonate (Zr-PhyA) was synthesized by reaction of phytic acid and ZrCl4 and was obtained as a mesoporous material with pore sizes centered around 8.5â nm. Zr-PhyA was used to catalyze the mild and selective Meerwein-Ponndorf-Verley (MPV) reduction of various carbonyl compounds, e.g., of levulinic acid and its esters into γ-valerolactone. Further studies indicated that both Zr and phosphate groups contribute significantly to the excellent performance of Zr-PhyA.
RESUMO
Solid-state Li metal batteries (SSLMBs) are widely investigated since they possess promising energy density and high safety. However, the poor interfacial compatibility between the electrolyte and electrodes limits their promising development. Herein, a robust composite electrolyte (poly(vinyl ethylene carbonate) electrolyte with 3 wt % of BaTiO3, PVEC-3BTO) with excellent interfacial performance is rationally designed by incorporating ferroelectric BaTiO3 (BTO) nanoparticles into the poly(vinyl ethylene carbonate) (PVEC) electrolyte matrix. Benefiting from the high dielectric constant and ferroelectric properties of BTO, the interfacial compatibility between electrolytes and electrodes was significantly improved. The enhanced Li+ transference number (0.64) of solid electrolyte and in situ generated BaF2 inorganic interphase contribute to the enhanced cycling stability of PVEC-3BTO based Li//Li symmetrical batteries. Furthermore, the antioxidation ability of PVEC-3BTO has also been enhanced by modulating the local electric field for good pairing with high-voltage LiCoO2 material. Therefore, in this work, the mechanism of BTO for improving interfacial compatibility is revealed, and also useful methods for addressing the interface issues of SSLMBs have been provided.
RESUMO
The "single-crystal" lithium-rich layered oxide (SC-LLO) material is applied for the first time to construct a composite cathode by a co-sintering process for garnet-based high-energy all-solid-state lithium metal batteries, which exhibit the high initial discharge capacity of â¼226 mA h g-1, and good capacity retention after tens of cycles.
RESUMO
A thin free-standing composite solid electrolyte film (CSE, â¼15 µm) is prepared by a tape casting and solution infusion method, which owns a high ionic conductivity (2.76 × 10-4 S cm-1 at 25 °C) and a wide electrochemical stability window (4.8 V vs. Li+/Li). The CSE-based solid-state lithium metal batteries with the LiCoO2 cathode present good cycling stability and capacity retention with a 4.5 V cut-off voltage.
RESUMO
The preparation of functional materials and value-added chemicals using biomass-derived feedstocks is an interesting topic. Herein, we propose a method to prepare Ru/graphene catalyst using glucose as the carbon source. The catalyst was characterized by scanning and transmission electron microscopies, Raman and X-ray photoelectron spectroscopies, and X-ray diffraction. It was found that Ru particles of 2-6â nm were supported uniformly on high-quality graphene. The performance of the Ru/graphene for hydrogenation of levulinic acid to γ-valerolactone was studied. The Ru/graphene had much higher activity for the hydrogenation reaction than commercial Ru/C, and was active even at room temperature. The high activity was partially due to the unique structure of graphene, which resulted in an electron-enriched Ru nanocatalyst. In addition, the Ru/graphene could be reused at least four times without considerable decrease in activity, indicating the excellent stability of the catalyst under our conditions.
Assuntos
Glucose/química , Grafite/química , Lactonas/química , Ácidos Levulínicos/química , Rutênio/química , Carbono/química , Catálise , Hidrogenação , Tamanho da Partícula , Espectroscopia Fotoeletrônica , Análise Espectral Raman , Temperatura , Difração de Raios XRESUMO
Ionic liquid 1-benzyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BnMIm][NTf2]) can promote the generation of the ËOOH free radical and thereby efficiently transformed the ß-O-4 lignin model compound 2-phenoxyacetophenone into benzoic acid and phenol using O2 as the oxidant. Furthermore, the IL-based metal-free catalytic system can also depolymerize other lignin model compounds and organosolv lignin effectively.