RESUMO
The hollow core anti-resonant fibers (HC-ARFs) based on soft glass are in high demand for 3-6 µm laser delivery. A HC-ARF based on tellurite glass with 6 touching capillaries as cladding was designed and fabricated for the first time, to the best of our knowledge. A relatively low loss of 3.75â dB/m at 4.45 µm was realized in it. The effects of capillary number, core diameter, wall thickness of capillary, and material absorption loss on the loss of the HC-ARF were analyzed by the numerically simulation. The output beam quality was measured and the influence of bending on the fiber loss was discussed. The results of numerical simulation suggested that the theoretical loss of the prepared fiber can be reduced to 0.1â dB/m, indicating that tellurite HC-ARFs have great potential for mid-infrared laser applications.
RESUMO
In this Letter, we focus on investigating the ultrafast photonics applications of two-layer HfS3 nanosheets. We prepared two-layer HfS3 nanosheets and carried out experiments to study their nonlinear saturable absorption properties. The results showed that the two-layer HfS3-based saturable absorber exhibited a modulation depth of 16.8%. Additionally, we conducted theoretical calculations using first principles to estimate the structural and electronic band properties of the two-layer HfS3 material. Furthermore, we utilized the two-layer HfS3 materials as SAs in an erbium-doped fiber cavity to generate mode-locked laser pulses. We measured a repetition frequency of 8.74â MHz, a pulse duration of 540â fs, and a signal-to-noise ratio of 77â dB. Overall, our findings demonstrate that the two-layer HfS3 material can serve as a reliable saturable absorber, possessing properties comparable to currently used two-dimensional materials. This expands the application fields of HfS3 materials and highlights their potential for advanced optoelectronic devices.
RESUMO
We investigate the power scaling and thermal management of multi-point side-pumped 2.825â µm heavily-erbium-doped fluoride fiber lasers by numerical simulation. The 4-point (or 6-point) erbium-doped fluoride fiber laser with polished erbium-doped fluoride fiber-based side-pump couplers delivers an output laser power of over 100 W at each launched 981â nm pump power of 100 W (or 75 W). Meanwhile, the core temperature increases of the gain fiber tips are below 1â K, making it possible for a highly reflective fiber Bragg grating to work stably in high-power operation. Once the preparation processes of these erbium-doped fluoride fiber-based side-pump couplers and endcaps with effective coatings are mature, the proposed multi-point side-pumped erbium-doped fluoride fiber lasers with some feasibility may theoretically pave the way for the development of hundred-watt mid-infrared fiber lasers with effective thermal management.
RESUMO
Mid-infrared fiber combiners have great potential in power and spectral combination. However, studies on mid-infrared transmission optical field distributions using these combiners are limited. In this study, we designed and fabricated a 7 × 1 multimode fiber combiner based on sulfur-based glass fibers and observed approximately 80% per-port transmission efficiency at 4.778â µm wavelength. We investigated the propagation properties of the prepared combiners and explored the effects of transmission wavelength, output fiber length, and fusion deviation on the transmitted optical field and beam quality factor M2. Additionally, we assessed the effect of coupling on the excitation mode and spectral combination of the mid-infrared fiber combiner for multiple light sources. Our results provide an in-depth understanding of the propagation properties of the mid-infrared multimode fiber combiners, which may find applications in high-beam-quality laser devices.
RESUMO
Chalcogenide hollow-core anti-resonant fibers (HC-ARFs) are a promising propagation medium for high-power mid-infrared (3-5â µm) laser delivery, while their properties have not been well understood and their fabrications remain challenging. In this paper, we design a seven-hole chalcogenide HC-ARF with touching cladding capillaries, which was then fabricated from purified As40S60 glass by combining the "stack-and-draw" method with a dual gas path pressure control technique. In particular, we predict theoretically and confirm experimentally that such medium exhibits higher-order mode suppression properties and several low-loss transmission bands in the mid-infrared spectrum, with the measured fiber loss being as low as 1.29â dB/m at 4.79â µm. Our results pave the way for the fabrication and implication of various chalcogenide HC-ARFs in mid-infrared laser delivery systems.
RESUMO
Polydopamine (PDA)-modified NaEr0.8Yb0.2 F4nanoparticles were synthesized, with strong NIR-II emission, quantum yield of 29.63%, and excellent photothermal performance. Crystal phases and microstructures are characterized. Optical properties such as absorption, NIR-II emission, and light stability are studied, and the luminescence mechanism is discussed in detail. Key factors in NIR-II imaging were evaluated in fresh pork tissue, including penetration depth, spatial resolution, and signal-to-noise ratio (SNR). A high penetration depth of 5 mm and a high spatial resolution of 1 mm were detected. Mice are imaged in vivo afterintravenousinjection. Due to the accumulation of nanoparticles in the liver, high image quality with an SNR of 5.2 was detected in the abdomen of KM mice with hair. The photothermal conversion effect of PDA-modified NPs was twice that of the reported material. These NIR-II nanoparticles have superior optical properties, high photothermal efficiency and low cytotoxicity, and are potential fluorescent probes for further disease diagnosis and treatment.
Assuntos
Nanopartículas , Polímeros , Animais , Corantes Fluorescentes/química , Indóis , Camundongos , Nanopartículas/química , Fototerapia , Polímeros/químicaRESUMO
This study proposes a novel, to the best of our knowledge, development of fluorotellurite glass fiber Bragg gratings (FBGs). Shell-like morphology was achieved using a single femtosecond laser pulse illuminated through the fiber's polymer coating. Different FBG fabrication methods and parameters were systematically studied to optimize performance. The fluorotellurite FBG exhibited a high sensitivity to writing laser power and reflectivity saturation effect in repetitive writing. A low-insertion-loss fluorotellurite FBG with a reflectivity of over 99% and bandwidth of less than 1 nm was successfully inscribed. The flexible inscription methods can write an FBG at any wavelength in the fluorotellurite glass transparent window, and are applicable to infrared fiber lasers or sensors.
RESUMO
The rapid increase in both the quantity and complexity of data that are being generated daily in the field of environmental science and engineering (ESE) demands accompanied advancement in data analytics. Advanced data analysis approaches, such as machine learning (ML), have become indispensable tools for revealing hidden patterns or deducing correlations for which conventional analytical methods face limitations or challenges. However, ML concepts and practices have not been widely utilized by researchers in ESE. This feature explores the potential of ML to revolutionize data analysis and modeling in the ESE field, and covers the essential knowledge needed for such applications. First, we use five examples to illustrate how ML addresses complex ESE problems. We then summarize four major types of applications of ML in ESE: making predictions; extracting feature importance; detecting anomalies; and discovering new materials or chemicals. Next, we introduce the essential knowledge required and current shortcomings in ML applications in ESE, with a focus on three important but often overlooked components when applying ML: correct model development, proper model interpretation, and sound applicability analysis. Finally, we discuss challenges and future opportunities in the application of ML tools in ESE to highlight the potential of ML in this field.
Assuntos
Ciência Ambiental , Aprendizado de MáquinaRESUMO
Chalcogenide glasses as kind of diamagnetic magneto-optical materials have promising applications in the field of integrated optics and optical communication systems due to their excellent properties, such as easy to be processed into waveguide and temperature independence of the Verdet constants. For clarifying the influence factors following the compositional variation on Faraday effect and finding a glass with a large Verdet constant, novel pseudo-ternary chalcogenide glass system, GeS2 - In2S3 - PbI2, was prepared and investigated. The composition, wavelength and temperature dependences on the Verdet constants were systematically investigated at the wavelengths of 635, 808, 980 and 1319 nm. PbI2 was confirmed to have positive contribution to the Verdet constant and the Becquerel rule was proved to be an effective guidance for predicting the Verdet constant in chalcogenide glasses. The 60GeS2·15In2S3·25PbI2 glass was found to possess the largest Verdet constant (V = 0.215 min·G-1·cm-1, @808nm), which is great larger than that of commercial diamagnetic glasses. These glasses also possess good glass-forming ability and VIS-IR transmittance, therefore be a good candidate for next-generation integrated optical isolator and other magneto-optical devices.
RESUMO
We reported on a highly effective chelate precursor doping technique for Yb-doped large-mode-area (LMA) fiber manufacture. By accurately controlling the evaporation temperature and flow rate of carrier gas, the chelate precursor doping technique is capable of making Yb-doped LMA silica fiber with good uniformity free of center dip, low numerical aperture of ~0.056, large preform core size of 4.46 mm, and appropriate cladding absorption of 1.17 dB/m at 976.4 nm. Based on a single-end-pump all-fiber oscillator laser setup, the laser output at 1080 nm reached 700 W with slope efficiency of 54.2%.
RESUMO
The study presents a novel design of multiring delivery fiber with large mode area for high power. Using a FiberCAD method, we investigated a fiber whose core is surrounded by alternative low- and high-index rings. Based on our calculation, the effective area is 400 µm2 at 1.08 µm, larger than the ~280 µm2 of conventional step-index fiber (20/400). The macrobending loss at 1.08 µm is estimated to be 1×10(-3) dB/m, approximately one-third that of conventional step-index fiber (20/400). The single-mode operation can be achieved by the macrobending loss contrast between the fundamental mode (<1 dB/m) and high-order mode (>100 dB/m). The results indicate that multiring delivery fiber fabricated by modified chemical vapor deposition process is a promising candidate for high-power transmission.
RESUMO
A glass-ceramic optical fiber containing Ba2TiSi2O8 nanocrystals fabricated using a novel combination of the melt-in-tube method and successive heat treatment is reported for the first time. For the melt-in-tube method, fibers act as a precursor at the drawing temperature for which the cladding glass is softened while the core glass is melted. It is demonstrated experimentally that following heat treatment, Ba2TiSi2O8 nanocrystals with diameters below 10 nm are evenly distributed throughout the fiber core. Comparing to the conventional rod-in-tube method, the melt-in-tube method is superior in terms of controllability of crystallization to allow for the fabrication of low loss glass-ceramic fibers. When irradiated using a 1030 nm femtosecond laser, an enhanced green emission at a wavelength of 515 nm is observed in the glass-ceramic fiber, which demonstrates second harmonic generation of a laser action in the fabricated glass-ceramic fibers. Therefore, this new glass-ceramic fiber not only provides a highly promising development for frequency conversion of lasers in all optical fiber based networks, but the melt-in-tube fabrication method also offers excellent opportunities for fabricating a wide range of novel glass-ceramic optical fibers for multiple future applications including fiber telecommunications and lasers.