CircTHBS1 promotes trophoblast cell migration and invasion and inhibits trophoblast apoptosis by regulating miR-136-3p/IGF2R axis.

The precise molecular mechanism behind fetal growth restriction (FGR) is still unclear, although there is a strong connection between placental dysfunction, inadequate trophoblast invasion, and its etiology and pathogenesis. As a new type of non-coding RNA, circRNA has been shown to play a crucial role in the development of FGR. This investigation identified the downregulation of hsa_circ_0034533 (circTHBS1) in FGR placentas through high-sequencing analysis and confirmed this finding in 25 clinical placenta samples using qRT-PCR. Subsequent in vitro functional assays demonstrated that silencing circTHBS1 inhibited trophoblast proliferation, migration, invasion, and epithelial mesenchymal transition (EMT) progression and promoted apoptosis. Furthermore, when circTHBS1 was overexpressed, cell function experiments showed the opposite result. Analysis using fluorescence in situ hybridization revealed that circTHBS1 was primarily found in the cytoplasmic region. Through bioinformatics analysis, we anticipated the involvement of miR-136-3p and IGF2R in downstream processes, which was subsequently validated through qRT-PCR and dual-luciferase assays. Moreover, the inhibition of miR-136-3p or the overexpression of IGF2R partially reinstated proliferation, migration, and invasion abilities following the silencing of circTHBS1. In summary, the circTHBS1/miR-136-3p/IGF2R axis plays a crucial role in the progression and development of FGR, offering potential avenues for the exploration of biological indicators and treatment targets.

Ru-Doped NiFe-MIL-53 with Facilitated Reconstruction and Active Hydrogen Supplement for Enhanced Nitrate Reduction.

The Electrochemical reduction of nitrate to ammonia (NH3) is a process of great significance to energy utilization and environmental protection. However, it suffers from sluggish multielectron/proton-involved steps involving coupling reactions between different reaction intermediates and active hydrogen species (Hads) produced by water decomposition. In this study, a Ru-doped NiFe-MIL-53 (NiFeRu-MIL-53) supported on Ni foam (NF) has been designed for the nitrate reduction reaction (NO3RR). The NiFeRu-MIL-53 exhibits excellent NO3RR activity with a maximum Faradaic efficiency (FE) of 100% at -0.4 V vs. RHE for NH3 and a maximum NH3 yield of 62.39 mg h-1 cm-2 at -0.7 V vs. RHE in alkaline media. This excellent performance for the NO3RR is attributed to a strong synergistic effect between Ru and reconstructed NiFe(OH)2. Additionally, the doped Ru facilitates water dissociation, leading to an appropriate supply of Hads required for N species hydrogenation during NO3RR, thereby further enhancing its performance. Furthermore, in situ Raman analysis reveals that incorporating Ru facilitates the reconstruction of MOFs and promotes the formation of hydroxide active species during the NO3RR process. This work provides a valuable strategy for designing electrocatalysts to improve the efficiency of the reduction of electrochemical nitrate to ammonia.

Ru-Doped Ultrasmall Cu Nanoparticles Decorated with Carbon for Electroreduction of Nitrate to Ammonia.

Electrocatalytic nitrate reduction reaction offers a sustainable approach to treating wastewater and synthesizing high-value ammonia under ambient conditions. However, electrocatalysts with low faradaic efficiency and selectivity severely hinder the development of nitrate-to-ammonia conversion. Herein, Ru-doped ultrasmall copper nanoparticles loaded on a carbon substrate (Cu-Ru@C) were fabricated by the pyrolysis of Cu-BTC metal-organic frameworks (MOFs). The Cu-Ru@C-0.5 catalyst exhibits a high faradaic efficiency (FE) of 90.4% at -0.6 V (vs RHE) and an ammonia yield rate of 1700.36 µg h-1mgcat.-1 at -0.9 V (vs RHE). Moreover, the nitrate conversion rate is almost 100% over varied pHs (including acid, neutral, and alkaline electrolytes) and different nitrate concentrations. The remarkable performance is attributed to the synergistic effect between Cu and Ru and the excellent conductivity of the carbon substrate. This work will open an exciting avenue to exploring MOF derivatives for ambient ammonia synthesis via selective electrocatalytic nitrate reduction.

Structure and Defect Engineering Synergistically Boost High Solar-to-Chemical Conversion Efficiency of Cerium oxide/Au Hollow Nanomushrooms for Nitrogen Photofixation.

Photocatalytic nitrogen fixation using solar illumination under ambient conditions is a promising strategy for production of the indispensable chemical NH3 . However, due to the catalyst's limitations in solar energy utilization, loss of hot electrons during transfer, and low nitrogen adsorption and activation capacity, the unsatisfactory solar-to-chemical conversion (SCC) efficiencies of most photocatalysts limit their practical applications. Herein, cerium oxide nanosheets with abundant strain-VO defects were anchored on Au hollow nanomushroom through atomically sharp interfaces to construct a novel semiconductor/plasmonic metal hollow nanomushroom-like heterostructure (denoted cerium oxide-AD/Au). Plasmonic Au extended the absorption of light from the visible to the second near-infrared region. The superior interface greatly enhanced the transfer efficiency of hot electrons. Abundant strain-VO defects induced by interfacial compressive strain promoted adsorption and in situ activation of nitrogen, and such synergistic promotion of strain and VO defects was further confirmed by density functional theory calculations. The judicious structural and defect engineering co-promoted the efficient nitrogen photofixation of the cerium oxide-AD/Au heterostructures with a SCC efficiency of 0.1 % under simulated AM 1.5G solar illumination, which is comparable to the average solar-to-biomass conversion efficiency of natural photosynthesis by typical plants, thus exhibiting significant potential as a new candidate for artificial photosynthesis.

Unconventional hcp/fcc Nickel Heteronanocrystal with Asymmetric Convex Sites Boosts Hydrogen Oxidation.

Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.

Powerful Orbital Hybridization of Copper-Silver Bimetallic Nanosheets for Electrocatalytic Nitrogen Reduction to Ammonia.

Electrochemical nitrogen reduction (eNRR) is a promising strategy to replace the energy- and capital-intensive Haber-Bosch process. Unfortunately, the low selectivity of the eNRR process impedes the industrial application of this approach. In this work, a highly efficient and stable NRR electrocatalyst is obtained via coreduction of Cu and Ag precursors using the holly leaves as reducing agents. The as-obtained Cu3Ag bimetallic nanosheets exhibit excellent NRR performance with an NH3 production rate of 31.3 µg h-1 mg-1cat. and a Faradaic efficiency of 31.3% at -0.2 V vs RHE. According to density functional theory (DFT) calculation, the outstanding performance of Cu3Ag bimetallic nanosheets could be caused by the fact that Ag optimizes the 3d orbital occupation of Cu and synergistically enhances the charge transfer during the NRR process, resulting in a suitable adsorption strength of the intermediates.

Selenite-Decorated Polycrystalline NiO Nanosheets Generated from Cathodic Reconstruction for Electrocatalytic Hydrogen Production.

Precatalyst reconstruction in alkaline hydrogen evolution reaction (HER) usually leads to changes in the morphology, composition, and structure, thus improving the catalytic activity, which recently receives intensive attention. However, the design strategies of cathodic reconstruction and the structural features of reconstruction products have not achieved a profound understanding. Here, from the point of thermodynamic stability, metastable nickel selenite dihydrate (NiSeO3·2H2O) is deliberately fabricated as a precatalyst to comprehensively study the reconstruction dynamics in alkaline HER. Multiple in/ex situ techniques capture the geometric, component, and phase evolutions, proving that NiSeO3·2H2O can be transformed into SeO32--decorated polycrystalline NiO nanosheets with rich active sites and good conductivity under alkaline HER conditions, which act as a real catalytic active species. Density functional theory calculations demonstrate that the adsorption of SeO32- can further promote the HER activity of NiO due to the optimized free energy of water activation and hydrogen adsorption. As a result, the SeO32--NiO catalyst exhibits a low overpotential at -10 mA cm-2 (90 mV) and long-term stability (>100 h). This work highlights the targeted design of precatalyst to trigger and utilize cathodic reconstruction and provides an available method for the development of adsorption-modulated efficient electrocatalysts.

Increased Oxygen Vacancies in CeO2 for Improved Electrocatalytic Nitrogen Reduction Performance.

Electrochemical nitrogen fixation is a sustainable and economical strategy to produce ammonia. However, fabricating efficient electrocatalysts for nitrogen fixation is still challenging. Theoretical predictions prove that the oxygen vacancy is able to modulate the electronic state of CeO2 and enhance its electrical conductivity, thus promoting the electrochemical nitrogen reduction reaction (NRR) process. Herein, CeO2 with high oxygen vacancy concentration was prepared via a two-step pyrolysis strategy of Ce metal-organic frameworks (MOFs, denoted H-CeO2). Compared to CeO2 with low oxygen vacancy concentration synthesized via one-step pyrolysis of Ce-MOFs (denoted L-CeO2), H-CeO2 exhibits a large NH3 yield rate (25.64 µg h-1 mgcat-1 at -0.5 V vs reversible hydrogen electrode, RHE) and high faradaic efficiency (FE, 6.3% at -0.4 V vs RHE).

Performance of whole-genome promoter nucleosome profiling of maternal plasma cell-free DNA for prenatal noninvasive prediction of fetal macrosomia: a retrospective nested case-control study in mainland China.

BACKGROUND: Fetal macrosomia is common occurrence in pregnancy, which is associated with several adverse prognosis both of maternal and neonatal. While, the accuracy of prediction of fetal macrosomia is poor. The aim of this study was to develop a reliable noninvasive prediction classifier of fetal macrosomia. METHODS: A total of 3600 samples of routine noninvasive prenatal testing (NIPT) data at 12+ 0-27+ 6 weeks of gestation, which were subjected to low-coverage whole-genome sequencing of maternal plasma cell-free DNA (cfDNA), were collected from three independent hospitals. We identified set of genes with significant differential coverages by comparing the promoter profiling between macrosomia cases and controls. We selected genes to develop classifier for noninvasive predicting, by using support vector machine (SVM) and logistic regression models, respectively. The performance of each classifier was evaluated by area under the curve (AUC) analysis. RESULTS: According to the available follow-up results, 162 fetal macrosomia pregnancies and 648 matched controls were included. A total of 1086 genes with significantly differential promoter profiling were found between pregnancies with macrosomia and controls (p < 0.05). With the AUC as a reference，the classifier based on SVM (CMA-A2) had the best performance, with an AUC of 0.8256 (95% CI: 0.7927-0.8586). CONCLUSIONS: Our study provides that assessing the risk of fetal macrosomia by whole-genome promoter nucleosome profiling of maternal plasma cfDNA based on low-coverage next-generation sequencing is feasible.

In vitro transcriptomes analysis identifies some special genes involved in pathogenicity difference of the Beauveria bassiana against different insect hosts.

Typical entomopathogenic filamentous fungi such as Beauveria bassiana infect susceptible hosts via penetration of insect cuticle. The pathogenicity of B. bassiana strain to diverse insect hosts is different. While the molecular mechanisms of B. bassiana adapt to different insects are not well clear. B. bassiana GXsk1011 is a hyper-virulent strain from silkworm, which was investigated on the metabolic responses to three cuticle extracts of Bombyx mori, Helicoverpa armigera and Clanis bilineata at 24 h by RNA-seq method. A total of 638 up- and 400 down-regulated differentially expressed genes (DEGs) were identified in B. bassiana grown on H. armigera compared with B. mori, and 910 up- and 401 down-regulated genes for C. bilineata compared with B. mori. Functional categorization showed that DEGs are mainly involved in metabolic processes, localization, catalytic activity and transporter activity. Analysis of 20 highest fold change genes in DEGs showed that when B. bassiana transferred to non-original hosts as H. armigera and C. bilineata, the adhesion (Mad1), protease (Pr2) and cell surface protein (BBA_09174), etc. were down-regulated. While the class III chitinase ChiA2 (BBA_05353, Bbchi-17), major allergen Asp f 2-like protein (BBA_05395, Bb-f2) and nonribosomal peptide synthase, etc. were up-regulated. The secretory lipase that responded to H. armigera and the phosphate permease responded to C. bilineata were also up-regulated in the Top 20 DEGs. These special expressed genes indicate when the B. bassiana transferred to non-original hosts (or called as non-natural hosts), the strain appeared the changes of metabolic response and infection strategies to adapt to new hosts, and implied the key actions of infected adaptation were to break the barrier of different cuticle chitin component and against the immune stress of hosts. This study provided an insight into the B. bassiana that with wide host ranges how to adapt to infect different insect hosts, which will help us to further understand the pathogenesis of B. bassiana infection.

[Experimental Research on Detection of Breast Carcinoma and Adjacent Tissues Based on Open-ended Coaxial Probe Tumor Sensor with Radio Frequencies].

This study aimed to verify whether the open-ended coaxial line tumor sensor with radio frequency was effective or not in detecting the differences in permittivity and conductivity between the breast malignant tissues and adjacent tissues.Sixteen breast infiltrating ductal carcinoma samples were freshly obtained from the department of general surgery in Zhujiang Hospital.The permittivity and conductivity of cancerous nidus points of breast samples,3cm adjacent tissue points and 5cm adjacent tissue points were detected respectively by the open-ended coaxial line tumor sensor with radio frequency noninvasively in conjunction with vector network analyzer at the frequency ranging from 42.85~500 MHz.All the detected points were marked.After finishing the detection,we conducted postoperative pathological examinations on all the marked points.According to the statistics,there were statistically significant differences between the breast cancerous tissues and the 3cm adjacent tissues for the dielectric properties(P<0.01).There were statistically significant differences between the breast cancerous tissues and the 5cm adjacent tissues for the dielectric properties(P<0.01).There was no statistically significant difference in the dielectric properties between the 3cm adjacent tissues and 5cm adjacent tissues(P>0.05).Both the 3cm adjacent tissues and5 cm adjacent tissues were found no breast cancer cell infiltration.The results indicated that the open-ended coaxial line tumor sensor at radio frequency could be effective in detecting the differences in permittivity and conductivity between breast cancerous tissues and adjacent tissues and,therefore,it may have a potential prospect in making a final diagnosis to confirm whether the detected breast tissue is malignant or not.

Pt@UiO-66 heterostructures for highly selective detection of hydrogen peroxide with an extended linear range.

In this study, a good core-shell heterostructure of Pt NPs@UiO-66 was fabricated by encapsulating presynthesized platinum nanoparticles (Pt NPs) into the host matrix of UiO-66 which possesses the slender triangular windows with a diameter of 6 Å. The transmission electron microscopy images exhibited that the number of the encapsulated Pt NPs and the crystalline morphology of as-synthesized core-shell heterostructure samples had a series of changes with increasing the volume of the injected Pt NPs precursor solution. Among these samples, the Pt NPs@UiO-66-2 sample had a good crystalline morphology with several well-dispersed Pt NPs encapsulated in UiO-66 frameworks. But there were no obvious Pt NPs observed in the Pt NPs@UiO-66-1 sample, and for the Pt NPs@UiO-66-3 sample, the number of Pt NPs encapsulated in UiO-66 matrix notably reduced and the metal organic framework (MOF) crystals became small and aggregated. The electrochemical measurements showed that the Pt NPs@UiO-66-2 sample modified glass carbon electrode (GCE) presented a remarkable electrocatalytic activity toward hydrogen peroxide (H2O2) oxidation, including an excellent anti-interference performance even if the concentration of the interference species was the same as the H2O2, an extended linear range from 5 µM to 14.75 mM, a low detection limit, as well as good stability and reproducibility. The results indicate the superiority of MOFs in H2O2 detection. And more importantly, it will provide a new opportunity to promote the anti-interference performance of the nonenzyme electrochemical sensors.

Ni/CdS bifunctional Ti@TiO2 core-shell nanowire electrode for high-performance nonenzymatic glucose sensing.

In this work, a Ni/CdS bifunctional Ti@TiO2 core-shell nanowire electrode with excellent electrochemical sensing property was successfully constructed through a hydrothermal and electrodeposition method. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were employed to confirm the synthesis and characterize the morphology of the as-prepared samples. The results revealed that the CdS layer between Ni and TiO2 plays an important role in the uniform nucleation and the following growth of highly dispersive Ni nanoparticle on the Ti@TiO2 core-shell nanowire surface. The bifunctional nanostructured electrode was applied to construct an electrochemical nonenzymatic sensor for the reliable detection of glucose. Under optimized conditions, this nonenzymatic glucose sensor displayed a high sensitivity up to 1136.67 µA mM(-1) cm(-2), a wider liner range of 0.005-12 mM, and a lower detection limit of 0.35 µM for glucose oxidation. The high dispersity of Ni nanoparticles, combined with the anti-poisoning faculty against the intermediate derived from the self-cleaning ability of CdS under the photoexcitation, was considered to be responsible for these enhanced electrochemical performances. Importantly, favorable reproducibility and long-term performance were also obtained thanks to the robust frameworks. All these results indicate this novel electrode is a promising candidate for nonenzymatic glucose sensing.

A large deletion in TSC2 causes tuberous sclerosis complex by dysregulating PI3K/AKT/mTOR signaling pathway.

BACKGROUND/AIM: Tuberous sclerosis complex (TSC) is a multi-system syndrome caused by loss-of-function mutation in TSC1 or TSC2. Most TSC patients present with cardiac rhabdomyoma or cortical tubers during fetal life, and the symptoms are not uniform as their age. The gene products of TSC1/2 are components of the TSC protein complex and are important role in the PI3K/AKT/mTOR (PAM) signaling pathway. Based on three members of a family with variable expressivity, the purpose of this study was to clarify the clinical features of TSC in different age groups and to analyze the genetic characteristics of TSC2 gene. METHODS: Clinical exome sequencing and co-segregation were used to identify a three-generation family with four affected individuals. HEK-293T cell model was constructed for subsequent experiments. Quantitative RT-PCR, western blotting, and subcellular localization were used to analyze the expression effect of TSC2 mutation. CCK-8 assay, wound healing assay, and cell cycle analysis were used to analyze the function effect of TSC2 mutation. RESULT: We identified a TSC family with heterozygous deletion of exon 4 in TSC2 by clinical exon sequencing. Sanger sequencing indicated that the affected individuals have 2541-bp deletion that encompassed exon 4 and adjacent introns. Deletion of exon 4 decreased the TSC2 mRNA and protein levels in HEK-293T cells, and activated the PI3K/AKT/mTOR pathway, thereby altering the cell cycle and promoting cell proliferation and migration. CONCLUSION: We confirmed the pathogenicity of the large deletion in TSC2 in a three- generations family.. Deletion of exon 4 of TSC2 affected cell proliferation, migration, and cell cycle via abnormal activation of the PAM pathway. This study evaluated the pathogenic effect of deletion of exon 4 of TSC2 and investigated the underlying mechanism.

CO-Tolerant Hydrogen Oxidation Electrocatalysts for Low-Temperature Hydrogen Fuel Cells.

The severe performance degradation of low-temperature hydrogen fuel cells upon exposure to trace amounts of carbon monoxide (CO) impurities in reformate hydrogen fuels is one of the challenges that hinders their commercialization. Despite significant efforts that have been made, the CO-tolerance performance of electrocatalysts for the hydrogen oxidation reaction (HOR) is still unsatisfactory. This Perspective discusses the path forward for the rational design of CO-tolerant HOR electrocatalysts. The fundamentals of the CO-tolerant mechanisms on commercialized platinum group metal (PGM) electrocatalysts via either promoting CO electrooxidation or weakening CO adsorption are provided, and comprehensive discussions based on these strategies are presented with typical examples. Given the recent progress, some emerging strategies, including blocking CO diffusion with a barrier layer and developing non-PGM HOR catalysts, are also discussed. We conclude with a discussion of the strengths and limitations of these strategies along with the perspectives of the major challenges and opportunities for future research on CO-tolerant HOR electrocatalysts.

Co(3)O(4) microspheres with free-standing nanofibers for high performance non-enzymatic glucose sensor.

Co3O4 microspheres with free-standing or bundled nanofibers (NFs) were fabricated for use as a platform for non-enzymatic glucose sensing. The sensor based on free-standing Co3O4 NFs displays enhanced sensitivity (1440 µA mM(-1) cm(-2)), a wider linear range (0.005-12 mM) and superior selectivity. The application of this glucose sensor in human blood serum has also been demonstrated successfully.

Dysfunction of ZNF554 promotes ROS-induced apoptosis and autophagy in Fetal Growth Restriction via the p62-Keap1-Nrf2 pathway.

Fetal growth restriction (FGR) is one of the most common complications of an abnormal pregnancy. Placental dysplasia has been established as a significant contributing factor to FGR. Zinc finger protein 554 (ZNF554) is a member of the Krüppel-associated box domain zinc finger protein subfamily, primarily expressed in the placenta and essential for maintaining normal pregnancy outcomes. However, its precise role in FGR remains uncertain. In this study, we confirmed that ZNF554 was low expressed in the placenta of the FGR pregnancy. To further elucidate the impact of ZNF554 on trophoblasts, we conducted experiments using siRNA and overexpression plasmids on HTR8/SVneo and JEG3 cells. Our findings revealed that silencing ZNF554 increased apoptosis and inhibited migration and invasion, while overexpression reduced apoptosis and promoted migration and invasion. Notably, ZNF554 knockdown decreased cellular antioxidant capacity and elevated the production of reactive oxygen species (ROS). Conversely, ZNF554 activated the nuclear factor E2-related factor 2 (NRF2) signaling pathway, exerting its antioxidant effects. Additionally, ZNF554 knockdown promoted cellular autophagy by suppressing P62 and enhancing LC3-II/LC3-I expression. Importantly, the antioxidant N-acetylcysteine (NAC) partially mitigated the impact of ZNF554 knockdown on mitochondrial ROS in trophoblast cells and subsequent effects on cellular autophagy and apoptosis. In conclusion, our results suggest that ZNF554 plays a pivotal role in modulating trophoblast cell invasion and may serve as a prognostic marker and potential therapeutic target for FGR.

Highly conductive nanostructured C-TiO2 electrodes with enhanced electrochemical stability and double layer charge storage capacitance.

The present work reports the structural and electrochemical properties of carbon-modified nanostructured TiO(2) electrodes (C-TiO(2)) prepared by anodizing titanium in a fluoride-based electrolyte followed by thermal annealing in an atmosphere of methane and hydrogen in the presence of Fe precursors. The C-TiO(2) nanostructured electrodes are highly conductive and contain more than 1 × 10(10) /cm(2) of nanowires or nanotubes to enhance their double layer charge capacitance and electrochemical stability. Electrogenerated chemiluminescence (ECL) study shows that a C-TiO(2) electrode can replace noble metal electrodes for ultrasensitive ECL detection. Dynamic potential control experiments of redox reactions show that the C-TiO(2) electrode has a broad potential window for a redox reaction. Double layer charging capacitance of the C-TiO(2) electrode is found to be 3 orders of magnitude higher than an ideal planar electrode because of its high surface area and efficient charge collection capability from the nanowire structured surface. The effect of anodization voltage, surface treatment with Fe precursors for carbon modification, the barrier layer between the Ti substrate, and anodized layer on the double layer charging capacitance is studied. Ferrocene carboxylic acid binds covalently to the anodized Ti surface forming a self-assembled monolayer, serving as an ideal precursor layer to yield C-TiO(2) electrodes with better double layer charging performance than the other precursors.

MOF-Derived Cu3P nanoparticles coated with N-doped carbon for nitrogen fixation.

Electrochemical nitrogen reduction is a significant alternative route for synthesizing ammonia, but constructing efficient catalysts for electrochemical nitrogen fixation still faces tough challenges. In this work, Cu3P@NC (NC: nitrogen-doped carbon) nanosheets were prepared via the low-temperature pyrolysis-phosphating of Cu-MOFs. When applied to the nitrogen reduction reaction, Cu3P@NC exhibited a high ammonia yield rate of 10.4 µg h-1 mg-1cat at -0.3 V (vs. RHE) and a faradaic efficiency (FE) of 6.3% at -0.1 V (vs. RHE). The outstanding performance was attributed to the large electrochemical surface area and the defects induced as a result of N doping, which helped enhance N2 adsorption. This work provides a novel strategy for preparing N-doped carbon materials for wide-ranging applications.

Amorphous ReS2 decorated TiO2 nanowire arrays for highly-efficient nitrogen reduction.

Herein, we constructed amorphous ReS2 nanosheets anchored on TiO2 nanowires by delicately forming Ti-O-Re bonds, which exhibited considerable average ammonia yield and faradaic efficiency as high as 5.3 µg h-1 cm-2cat. and 49.8% at an applied potential of -0.2 V (vs. RHE) in 0.1 M Na2SO4. The high NRR performance could be attributed to the amorphous feature of the ReS2 nanosheets, the rich oxygen vacancies in the TiO2 nanowires and their semiconducting feature, which not only facilitate the sufficient exposure of active sites but also efficiently boost the faradaic efficiency due to the good regulation of surface proton or electron accessibility.