The Use of Iron-Doped Anatase TiO2 Nanofibers for Enhanced Photocatalytic Fenton-like Reaction to Degrade Tylosin.

The removal of antibiotics from wastewater to prevent their environmental accumulation is significant for human health and ecosystems. Herein, iron (Fe)-atom-doped anatase TiO2 nanofibers (Fe-TNs) were manufactured for the photocatalytic Fenton-like decomposition of tylosin (TYL) under LED illumination. Compared with the pristine TiO2 nanofibers (TNs), the optimized Fe-TNs exhibited improved visible-light-driven photocatalytic Fenton-like activity with a TYL degradation efficiency of 98.5% within 4 h. The effective TYL degradation could be attributed to the expanded optical light absorption and accelerated separation and migration of photogenerated electrons and holes after the introduction of Fe. The photogenerated electrons were highly conducive to the generation of active SO4•- radicals as they facilitated Fe(III)/Fe(II) cycles, and to oxidizing TYL. Moreover, the holes could be involved in TYL degradation. Thus, a significant enhancement in TYL degradation could be achieved. This research verifies the use of iron-doped anatase nanofibers as an effective method to synthesize novel photocatalytic Fenton-like catalysts through surface engineering for wastewater remediation.

Effect of local coordination on catalytic activities and selectivities of Fe-based catalysts for N2 reduction.

Electrochemical reduction of nitrogen is considered a promising route for achieving green and sustainable ammonia synthesis under ambient conditions. A transition metal atom loaded on N-doped graphene is commonly used in the nitrogen reduction reaction (NRR), but the effect of the graphene's coordination environment on electron transfer has rarely been studied. Herein, the NRR performance of Fe1/2/3 clusters, anchored on single-vacancy and N-doped graphene, is investigated systematically via density functional theory (DFT). The calculation results show that the Fe2 cluster supported by two N atom-modified single-vacancy graphene displays the highest catalytic performance of NRR with the lowest energy barrier of 0.62 eV among the 12 candidates, and exhibits efficient selectivity. It has superior performance because of the highly asymmetrical distribution of electrons on graphene, the large positive charge of the Fe2, and the strong adsorption of *NNH. This study provides a new strategy to improve the NRR performance by regulating the Fe1/2/3 clusters coordination environment.

An Unsaturated Bond Strategy to Regulate Active Centers of Metal-Free Covalent Organic Frameworks for Efficient Oxygen Reduction.

Unsaturated environment is the key to affect catalytic activity of the oxygen reduction reaction (ORR). Unveiling the effect of unsaturated sites toward ORR activity is of importance due to the vague unsaturated states. Reported here is a proof-of-concept strategy on the evaluation of unsaturated bonds (UBs) on adjacent carbon environment by precisely developing two metal-free vinyl-/azo-decorated covalent organic frameworks (Vinyl-COF and Azo-COF) as catalysts. The as-prepared UB-COFs exhibit good performance than the control Py-COF and comparable to the most reported carbon catalysts. Supported by theory calculations and in situ Raman spectra-electrochemistry, it is revealed that the UBs in organic catalysts can produce para-activation, identifying the para C=N groups as active centers. Importantly, the intrinsic UBs can induce local charge redistribution, and make the molecular skeleton possess high isosurface map distribution, with an efficient affinity for oxygen intermediates.

Red Phosphorus Decorated TiO2 Nanorod Mediated Photodynamic and Photothermal Therapy for Renal Cell Carcinoma.

Clear cell renal cell carcinoma (ccRCC) is a serious and tenacious disease. Photodynamic therapy (PDT) and photothermal therapy (PTT) are effective means of cancer treatment. However, PDT combined with PTT has been rarely reported in ccRCC treatment. In the present study, by developing the core-shell structured TiO2 @red phosphorus nanorods (TiO2 @RP NRs) as a photosensitizer, the feasibility and effectiveness of synchronous PDT and PTT treatments for ccRCC are demonstrated. The core-shell structured TiO2 @RP NRs are synthesized to drive the PDT and PTT for ccRCC, in which the RP shell is the sensitizer even in the near-infrared (NIR) region. The optimized TiO2 @RP NRs can respond to NIR and produce local heat under irradiation. The NRs are estimated in ccRCC treatments via cell counting kit-8 assay, propidium iodide staining, qRT-PCR, and reactive oxygen species (ROS) probes in vitro, while terminal deoxynucleotidyl transferase dUTP nick-end labeling is conducted in vivo. After NIR irradiation, TiO2 @RP NRs can efficiently kill ccRCC cells by producing local heat and ROS and cause low injury to normal kidney cells. Furthermore, treatment with TiO2 @RP NRs and NIR can kill significant numbers of deep-tissue ccRCC cells in vivo. This work highlights a promising photo-driven therapy for kidney cancer.

Controlled Asymmetric Charge Distribution of Active Centers in Conjugated Polymers for Oxygen Reduction.

Active center reconstruction is essential for high performance oxygen reduction reaction (ORR) electrocatalysts. Usually, the ORR activity stems from the electronic environment of active sites by charge redistribution. We introduce an asymmetry strategy to adjust the charge distribution of active centers by designing conjugated polymer (CP) catalysts with different degrees of asymmetry. We synthesized asymmetric backbone CP (asy-PB) by modifying B←N coordination bonds and asymmetric sidechain CP (asy-PB-A) with different alkyl chain lengths. Both CPs with backbone and sidechain asymmetry exhibit superior ORR performance to their symmetric counterparts (sy-P and sy-PB). The asy-PB with greater asymmetry shows higher catalytic activity than asy-PB-A with relatively smaller asymmetry. DFT calculations reveal that the increased dipole moment and non-uniform charge distribution caused by asymmetric structure endows the center carbon atom of bipyridine with efficient catalytic activity.

Sodium-Decorated Amorphous/Crystalline RuO2 with Rich Oxygen Vacancies: A Robust pH-Universal Oxygen Evolution Electrocatalyst.

The oxygen evolution reaction (OER) is a key reaction for many electrochemical devices. To date, many OER electrocatalysts function well in alkaline media, but exhibit poor performances in neutral and acidic media, especially the acidic stability. Herein, sodium-decorated amorphous/crystalline RuO2 with rich oxygen vacancies (a/c-RuO2 ) was developed as a pH-universal OER electrocatalyst. The a/c-RuO2 shows remarkable resistance to acid corrosion and oxidation during OER, which leads to an extremely high catalytic stability, as confirmed by a negligible overpotential increase after continuously catalyzing OER for 60 h at pH=1. Besides, a/c-RuO2 also exhibits superior OER activities to commercial RuO2 and most reported OER catalysts under all pH conditions. Theoretical calculations indicated that the introduction of Na dopant and oxygen vacancy in RuO2 weakens the adsorption strength of the OER intermediates by engineering the d-band center, thereby lowering the energy barrier for OER.

Metal-Free Thiophene-Sulfur Covalent Organic Frameworks: Precise and Controllable Synthesis of Catalytic Active Sites for Oxygen Reduction.

Defective or heteroatom-doped metal-free carbon materials (MFCMs) have been regarded as efficient oxygen reduction reaction (ORR) catalysts in the past decade. However, the active centers for ORR in MFCMs are hard to confirm precisely and synthesize controllably through common methods such as high-temperature pyrolysis or heteroatom doping. To verify the precise structure acting as the active center for the ORR, we first report two crystalline metal-free thiophene-sulfur covalent organic frameworks (MFTS-COFs) as ORR catalysts. The MFTS-COFs show more positive catalytic capability than the thiophene-free COF, indicating that pentacyclic thiophene-sulfur building blocks act as active centers to induce ORR catalytic activity. MFTS-COFs with higher contents of thiophene-sulfur exhibit better ORR performance. The experimental identification is supported by density functional theory calculations. These results thus demonstrate that rational design and precise synthesis of metal-free crystalline organic materials can promote the development of new ORR catalysts.

Sulfur-Modified Oxygen Vacancies in Iron-Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark.

The oxygen vacancies of defective iron-cobalt oxide (FeCoOx -Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co-S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoOx -Vo-S to exhibit much superior OER activity. FeCoOx -Vo-S exhibits a mass activity of 2440.0 A g-1 at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO2 . The Tafel slope is as low as 21.0 mV dec-1 , indicative of its excellent charge transfer rate. When FeCoOx -Vo-S (anode catalyst) is paired with the defective CoP3 /Ni2 P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm-2 and 406.0 mA cm-2 at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.

Understanding the Activity of Co-N4-x Cx in Atomic Metal Catalysts for Oxygen Reduction Catalysis.

Atomic metal catalysis (AMC) provides an effective way to enhance activity for the oxygen reduction reaction (ORR). Cobalt anchored on nitrogen-doped carbon materials have been extensively reported. The carbon-hosted Co-N4 structure was widely considered as the active site; however, it is very rare to investigate the activity of Co partially coordinated with N, for example, Co-N4-x Cx . Herein, the activity of Co-N4-x Cx with tunable coordination environment is investigated as the active sites for ORR catalysis. The defect (di-vacancies) on carbon is essential for the formation of Co-N4-x Cx . N species play two important roles in promoting the intrinsic activity of atomic metal catalyst: N coordinated with Co to manipulate the reactivity by modification of electronic distribution and N helped to trap more Co to increase the number of active sites.

A [001]-Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide-Spectrum-Responsive Photocatalytic Hydrogen Evolution from Pure Water.

Red phosphorus is a promising photocatalyst with wide visible-light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]-oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 µmol h-1 from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]-oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron-hole separation and transfer, which benefited the photocatalytic HER performance.

3D Sulfur and Nitrogen Codoped Carbon Nanofiber Aerogels with Optimized Electronic Structure and Enlarged Interlayer Spacing Boost Potassium-Ion Storage.

Carbonaceous materials are promising anodes for potassium-ion batteries (PIBs). However, it is hard for large K ions (1.38 Å) to achieve long-distance diffusion in pristine carbonaceous materials. In this work, the following are synthesized: S/N codoped carbon nanofiber aerogels (S/N-CNFAs) with optimized electronic structure by S/N codoping, enhanced interlayer spacing by S doping, and a 3D interconnected porous structure of aerogel, through a pyrolysis sustainable seaweed (Fe-alginate) aerogel strategy. Specifically, the S/N-CNFAs electrode delivers high reversible capacities of 356 and 112 mA h g-1 at 100 and 5000 mA g-1 , respectively. The capacity reaches 168 mA h g-1 at 2000 mA g-1 after 1000 cycles. A full cell with a S/N-CNFAs anode and potassium prussian blue cathode displays a specific capacity of 198 mA h g-1 at 200 mA g-1 . Density functional theory calculations indicate that S/N codoping is beneficial to synergistically improve K ions storage of S/N-CNFAs by enhancing the adsorption of K ions and reducing the diffusion barrier of K ions. This work offers a facile heteroatom doping paradigm for designing new carbonaceous anodes for high-performance PIBs.

Capture and separation of circulating tumor cells using functionalized magnetic nanocomposites with simultaneous in situ chemotherapy.

Circulating tumor cells (CTCs) are a type of rare cell that are firstly shed from solid tumors and then exist in the bloodstream. The effective capture and separation of CTCs has significant meaning in cancer diagnosis and prognosis. In this study, novel Fe3O4-FePt magnetic nanocomposites (Fe3O4-FePt MNCs) were constructed by integrating face centered cubic (fcc) FePt nanoparticles (NPs) onto the surface of the Fe3O4@SiO2 core. After further modification with NH2-PEG-COOH and the tumor-targeting molecule tLyP-1, the acquired Fe3O4-FePt MNCs possesses excellent biocompatibility and stability and could efficiently target and capture tLyP-1 receptor-positive CTCs. Based on the acidic microenvironment within cancer cells, the FePt layer could rapidly release active Fe2+ ions, which could catalyze H2O2 into reactive oxygen species (ROS) and further induce in situ apoptosis in cancer cells while having no distinct cytotoxicity to normal cells. Moreover, the Fe3O4@SiO2 core with its intrinsic magnetism has huge potential for the bioseparation of CTCs. The in vitro ROS fluorescence imaging experiments and cell capture and separation experiments indicated that the Fe3O4-FePt MNCs could specifically capture and separate cancer cells in the CTCs model and further induce in situ apoptosis. Therefore, the Fe3O4-FePt MNCs could serve as a promising multifunctional nanoseparator for efficiently capturing CTCs and simultaneously inducing in situ chemotherapy.

Heterocyclization Strategy for Construction of Linear Conjugated Polymers: Efficient Metal-Free Electrocatalysts for Oxygen Reduction.

Exploring cost-effective and efficient metal-free electrocatalysts for the oxygen reduction reaction (ORR) is crucial for the development of energy conversion and storage technologies. Reported here is a novel heterocyclization strategy to construct efficient ORR catalysts based on linear conjugated polymers (LCPs), which are composed of N-, S-, or Se-heterocycles. Among these polymers, the covalently linked pyridine and thiophene molecule (P-T) with reduced graphene oxide (rGO) exhibits a remarkable half-wave potential of 0.79 V (vs. RHE) and excellent electrochemical stability, which are among the highest values for metal-free polymers as ORR catalysts. Density-functional theory (DFT) calculations reveal that the molecule with a phenyl unit (P-Ph) is catalytically inactive, and when a thiophene unit is introduced to replace the phenyl unit in the conjugated backbone it features highly efficient electrocatalytic active sites. More importantly, the well-defined molecular structures and controllable active sites in the pyrolysis and metal-free polymers highlight new opportunities for the catalytic metal-free ORR.

A Surfactant-Free and Scalable General Strategy for Synthesizing Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets for the Oxygen Evolution Reaction.

Metal-organic framework (MOFs) two-dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top-down or bottom-up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF-74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top-down) or the conventional solvothermal method (bottom-up). The ultrathin iron-cobalt MOF-74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF-74 particles and the state-of-the-art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.

Charge Polarization from Atomic Metals on Adjacent Graphitic Layers for Enhancing the Hydrogen Evolution Reaction.

Atomic metal species-based catalysts (AMCs) show remarkable possibilities in various catalytic reactions. The coordination configuration of the metal atoms has been widely recognized as the determining factor to the electronic structure and the catalytic activity. However, the synergistic effect between the adjacent layers of the multilayered AMCs is always neglected. We reported an atomic Co and Pt co-trapped carbon catalyst, which exhibits a ultrahigh activity for HER in the wide range of pH (η10 =27 and 50 mV in acidic and alkaline media, respectively) with ultralow metal loadings (1.72 and 0.16 wt % for Co and Pt, respectively), which is much superior to the commercial Pt/C. Theoretical analysis reveals that the atomic metals on the inner graphitic layers significantly alter the electronic structure of the outmost layer, thus tailoring the HER activity. This finding arouses a re-thinking of the intrinsic activity origins of AMCs and suggests a new avenue in the structure design of AMCs.

Coordination of Atomic Co-Pt Coupling Species at Carbon Defects as Active Sites for Oxygen Reduction Reaction.

Platinum (Pt) is the state-of-the-art catalyst for oxygen reduction reaction (ORR), but its high cost and scarcity limit its large-scale use. However, if the usage of Pt reduces to a sufficiently low level, this critical barrier may be overcome. Atomically dispersed metal catalysts with high activity and high atom efficiency have the possibility to achieve this goal. Herein, we report a locally distributed atomic Pt-Co nitrogen-carbon-based catalyst (denoted as A-CoPt-NC) with high activity and robust durability for ORR (267 times higher than commercial Pt/C in mass activity). The A-CoPt-NC shows a high selectivity for the 4e- pathway in ORR, differing from the reported 2e- pathway characteristic of atomic Pt catalysts. Density functional theory calculations suggest that this high activity originates from the synergistic effect of atomic Pt-Co located on a defected C/N graphene surface. The mechanism is thought to arise from asymmetry in the electron distribution around the Pt/Co metal centers, as well as the metal atoms' coordination with local environments on the carbon surface. This coordination results from N8V4 vacancies (where N8 represents the number of nitrogen atoms and V4 indicates the number of vacant carbon atoms) within the carbon shell, which enhances the oxygen reduction reaction via the so-called synergistic effect.

Sub-1.5 nm Ultrathin CoP Nanosheet Aerogel: Efficient Electrocatalyst for Hydrogen Evolution Reaction at All pH Values.

Transition metal phosphides (TMPs) are certified high performance electrocatalysts for the hydrogen evolution reaction (HER). The ultrathin 2D structure of TMPs can offer abundant adsorption sites to boost HER performance. Herein, an ice-templating strategy is developed to prepare CoP aerogels composed of 2D ultrathin CoP nanosheets (<1.5 nm) using sustainable alginate biomass (seaweed extract) as the precursor. The highly porous aerogel structure can not only deliver facile mass transfer, but also prevent aggregation of the nanosheets into layered structures. As expected, the obtained CoP nanosheet aerogels exhibit remarkable stability and excellent electrocatalytic HER performance at all pH values. For instance, the sample CoP-400 presents a low overpotential of 113, 154, and 161 mV versus RHE at a current density of 10 mA cm-2 in 0.5 m H2SO4, 1 m KOH, and 1 m phosphate buffer solution, respectively. In addition, CoP-400 displays low Tafel slopes at all pH values due to the interconnected highly porous structure of the aerogel, indicating that the sample can provide low-resistance channels for mass transport. Density functional theory calculations reveal that P-top and Co bridge on (011) facet of CoP are more favorable sites during the process of HER in acid and alkaline solutions, respectively.

Performance of Preformed Au/Cu Nanoclusters Deposited on MgO Powders in the Catalytic Reduction of 4-Nitrophenol in Solution.

The deposition of preformed nanocluster beams onto suitable supports represents a new paradigm for the precise preparation of heterogeneous catalysts. The performance of the new materials must be validated in model catalytic reactions. It is shown that gold/copper (Au/Cu) nanoalloy clusters (nanoparticles) of variable composition, created by sputtering and gas phase condensation before deposition onto magnesium oxide powders, are highly active for the catalytic reduction of 4-nitrophenol in solution at room temperature. Au/Cu bimetallic clusters offer decreased catalyst cost compared with pure Au and the prospect of beneficial synergistic effects. Energy-dispersive X-ray spectroscopy coupled with aberration-corrected scanning transmission electron microscopy imaging confirms that the Au/Cu bimetallic clusters have an alloy structure with Au and Cu atoms randomly located. Reaction rate analysis shows that catalysts with approximately equal amounts of Au and Cu are much more active than Au-rich or Cu-rich clusters. Thus, the interplay between the Au and Cu atoms at the cluster surface appears to enhance the catalytic activity substantially, consistent with model density functional theory calculations of molecular binding energies. Moreover, the physically deposited clusters with Au/Cu ratio close to 1 show a 25-fold higher activity than an Au/Cu reference sample made by chemical impregnation.

Plasma-Triggered Synergy of Exfoliation, Phase Transformation, and Surface Engineering in Cobalt Diselenide for Enhanced Water Oxidation.

Various strategies, such as increasing active site numbers and structural and surface engineering, have been used to improve the oxygen evolution reaction (OER) performance of transition-metal dichalcogenides. However, it is challenging to combine these strategies in one system to realize the full catalytic potential. Now, an Ar/O2 plasma method is used to simultaneously induce exfoliation, surface reorganization (formation of an oxidative layer with rich oxygen vacancies), and phase transformation (cubic-to-orthorhombic) on CoSe2 to generate an exceptionally outstanding OER electrocatalysts. The as-made samples require an overpotential of only 251 mV at 10 mA cm-2 , outperforming commercial RuO2 and most reported OER catalysts. The striking catalytic activity originates from the optimized chemical and electronic environment. This work provides valuable insights into the design of promising OER electrocatalysts with high natural abundance via multilevel structural modulation.

Selective Capture of Toxic Selenite Anions by Bismuth-based Metal-Organic Frameworks.

Chemically durable and effective absorbent materials for selenite (SeO32- ) remain highly desirable for contamination remediation. Now a bismuth-based metal-organic framework (Bi-MOF, CAU-17) was used as adsorbent to capture SeO32- anions from aqueous solution with ultrahigh adsorption capacity of 255.3 mg g-1 and fast kinetics. Furthermore, the adsorbent showed excellent selectivity for SeO32- and was able to work steadily in a broad pH range of 4-11. Density functional theory (DFT) calculation, XANES modeling, and EXAFS fitting suggested that SeO32- anions were immobilized by forming Bi-O-Se bonds (T-3 structural model) though splitting the O-Bi-O bond in the crystal structure, leading to a structural transformation of CAU-17 in the solid state.