The MAPK-Alfin-like 7 module negatively regulates ROS scavenging genes to promote NLR-mediated immunity.

Nucleotide-binding leucine-rich repeat (NLR) receptor-mediated immunity includes rapid production of reactive oxygen species (ROS) and transcriptional reprogramming, which is controlled by transcription factors (TFs). Although some TFs have been reported to participate in NLR-mediated immune response, most TFs are transcriptional activators, and whether and how transcriptional repressors regulate NLR-mediated plant defenses remains largely unknown. Here, we show that the Alfin-like 7 (AL7) interacts with N NLR and functions as a transcriptional repressor. Knockdown and knockout of AL7 compromise N NLR-mediated resistance against tobacco mosaic virus, whereas AL7 overexpression enhances defense, indicating a positive regulatory role for AL7 in immunity. AL7 binds to the promoters of ROS scavenging genes to inhibit their transcription during immune responses. Mitogen-activated protein kinases (MAPKs), salicylic acid-induced protein kinase (SIPK), and wound-induced protein kinase (WIPK) directly interact with and phosphorylate AL7, which impairs the AL7-N interaction and enhances its DNA binding activity, which promotes ROS accumulation and enables immune activation. In addition to N, AL7 is also required for the function of other Toll interleukin 1 receptor/nucleotide-binding/leucine-rich repeats (TNLs) including Roq1 and RRS1-R/RPS4. Our findings reveal a hitherto unknown MAPK-AL7 module that negatively regulates ROS scavenging genes to promote NLR-mediated immunity.

A potyvirus provides an efficient viral vector for gene expression and functional studies in Asteraceae plants.

Plant virus-derived vectors are rapid and cost-effective for protein expression and gene functional studies in plants, particularly for species that are difficult to genetically transform. However, few efficient viral vectors are available for functional studies in Asteraceae plants. Here, we identified a potyvirus named zinnia mild mottle virus (ZiMMV) from common zinnia (Zinnia elegans Jacq.) through next-generation sequencing. Using a yeast homologous recombination strategy, we established a full-length infectious cDNA clone of ZiMMV under the control of the cauliflower mosaic virus 35S promoter. Furthermore, we developed an efficient expression vector based on ZiMMV for the persistent and abundant expression of foreign proteins in the leaf, stem, root, and flower tissues with mild symptoms during viral infection in common zinnia. We showed that the ZiMMV-based vector can express ZeMYB9, which encodes a transcript factor inducing dark red speckles in leaves and flowers. Additionally, the expression of a gibberellic acid (GA) biosynthesis gene from the ZiMMV vector substantially accelerated plant height growth, offering a rapid and cost-effective method. In summary, our work provides a powerful tool for gene expression, functional studies, and genetic improvement of horticultural traits in Asteraceae plant hosts.

Layered 3D Covalent Organic Framework Films Based on Carbon-Carbon Bonds.

The development of covalent organic frameworks (COFs) during the past decades has led to a variety of promising applications within gas storage, catalysis, drug delivery, and sensing. Even though most described synthesis methods result in powdery COFs with uncontrolled grain size, several approaches to grow COF films have recently been explored. However, in all COFs so far presented, the isolated materials are chemically homogeneous, with all functionalities homogeneously distributed throughout the entire material. Strategies to synthetically manipulate the spatial distribution of functionalities in a single film would be game changing. Specifically, this would allow for the introduction of local functionalities and even consecutive functions in single frameworks, thus broadening their synthetic versatility and application potential. Here, we synthesize two 3D crystalline COF films. The frameworks, the ionic B-based and neutral C-based COFs, have similar unit cell parameters, which enables their epitaxial stacking in a layered 3D COF film. The film growth was monitored in real time using a quartz crystal microbalance, showing linear growth with respect to reaction time. The high degree of polymerization was confirmed by chemical analysis and vibrational spectroscopy. Their polycrystalline and anisotropic natures were confirmed with grazing incidence X-ray diffraction. We further expand the scope of the concept by making layered films from COF-300 and its iodinated derivative. Finally, the work presented here will pave the path for multifunctional COF films where concurrent functionalities are embedded in the same crystalline material.

Coordination-Promoted Bio-Catechol Electro-Reforming toward Sustainable Polymer Production.

Sustainable polymer production is essential for a carbon-neutral society. cis,cis-Muconic acid is attracting growing interest as a biomass-derived platform molecule with direct access to adipic acid and terephthalic acid, prominent monomers of commercial polymers. Here, a sustainable route of electro-reforming biorenewable catechol to cis,cis-muconic acid with concurrent H2 production has been proposed. By using a CuO foam electrode, a high cis,cis-muconate yield of 90% and a high faradaic efficiency of 87% can be achieved under ambient conditions without external oxidant. Zn2+ coordination with the catechol is central to the yield and selectivity. In a combinatory analysis via steady-state electrochemical kinetics, in situ spectroscopy, and theoretical calculation, we revealed that the reaction ensemble of catechol electrooxidation involves three major processes of polymerization, ring cleavage, and depolymerization, in which Zn2+ coordination is highly effective in delaying polymerization and promoting ring cleavage toward cis,cis-muconate. The catecholate coordinated to the Zn2+ cations reallocated its electron density with partial structural deformation to accelerate the electron transfer and facilitate the OH- nucleophilic attack. A practical two-electrode system was eventually demonstrated to efficiently and stably electro-reform catechol into isolable cis,cis-muconic acid and hydrogen, providing solutions for polymer sustainability via utilizing alternative biomass resources and electrified processes.

A rhabdovirus accessory protein inhibits jasmonic acid signaling in plants to attract insect vectors.

Plant rhabdoviruses heavily rely on insect vectors for transmission between sessile plants. However, little is known about the underlying mechanisms of insect attraction and transmission of plant rhabdoviruses. In this study, we used an arthropod-borne cytorhabdovirus, Barley yellow striate mosaic virus (BYSMV), to demonstrate the molecular mechanisms of a rhabdovirus accessory protein in improving plant attractiveness to insect vectors. Here, we found that BYSMV-infected barley (Hordeum vulgare L.) plants attracted more insect vectors than mock-treated plants. Interestingly, overexpression of BYSMV P6, an accessory protein, in transgenic wheat (Triticum aestivum L.) plants substantially increased host attractiveness to insect vectors through inhibiting the jasmonic acid (JA) signaling pathway. The BYSMV P6 protein interacted with the constitutive photomorphogenesis 9 signalosome subunit 5 (CSN5) of barley plants in vivo and in vitro, and negatively affected CSN5-mediated deRUBylation of cullin1 (CUL1). Consequently, the defective CUL1-based Skp1/Cullin1/F-box ubiquitin E3 ligases could not mediate degradation of jasmonate ZIM-domain proteins, resulting in compromised JA signaling and increased insect attraction. Overexpression of BYSMV P6 also inhibited JA signaling in transgenic Arabidopsis (Arabidopsis thaliana) plants to attract insects. Our results provide insight into how a plant cytorhabdovirus subverts plant JA signaling to attract insect vectors.

Casein Kinase 1 Regulates Cytorhabdovirus Replication and Transcription by Phosphorylating a Phosphoprotein Serine-Rich Motif.

Casein kinase 1 (CK1) family members are conserved Ser/Thr protein kinases that regulate important developmental processes in all eukaryotic organisms. However, the functions of CK1 in plant immunity remain largely unknown. Barley yellow striate mosaic virus (BYSMV), a plant cytorhabdovirus, infects cereal crops and is obligately transmitted by the small brown planthopper (SBPH; Laodelphax striatellus). The BYSMV phosphoprotein (P) exists as two forms with different mobilities corresponding to 42 kD (P42) and 44 kD (P44) in SDS-PAGE gels. Mass spectrometric analyses revealed a highly phosphorylated serine-rich (SR) motif at the C-terminal intrinsically disordered region of the P protein. The Ala-substitution mutant (PS5A) in the SR motif stimulated virus replication, whereas the phosphorylation-mimic mutant (PS5D) facilitated virus transcription. Furthermore, PS5A and PS5D associated preferentially with nucleocapsid protein-RNA templates and the large polymerase protein to provide optimal replication and transcription complexes, respectively. Biochemistry assays demonstrated that plant and insect CK1 protein kinases could phosphorylate the SR motif and induce conformational changes from P42 to P44. Moreover, overexpression of CK1 or a dominant-negative mutant impaired the balance between P42 and P44, thereby compromising virus infections. Our results demonstrate that BYSMV recruits the conserved CK1 kinases to achieve its cross-kingdom infection in host plants and insect vectors.

Ion sieving in graphene oxide membranes via cationic control of interlayer spacing.

Graphene oxide membranes-partially oxidized, stacked sheets of graphene-can provide ultrathin, high-flux and energy-efficient membranes for precise ionic and molecular sieving in aqueous solution. These materials have shown potential in a variety of applications, including water desalination and purification, gas and ion separation, biosensors, proton conductors, lithium-based batteries and super-capacitors. Unlike the pores of carbon nanotube membranes, which have fixed sizes, the pores of graphene oxide membranes-that is, the interlayer spacing between graphene oxide sheets (a sheet is a single flake inside the membrane)-are of variable size. Furthermore, it is difficult to reduce the interlayer spacing sufficiently to exclude small ions and to maintain this spacing against the tendency of graphene oxide membranes to swell when immersed in aqueous solution. These challenges hinder the potential ion filtration applications of graphene oxide membranes. Here we demonstrate cationic control of the interlayer spacing of graphene oxide membranes with ångström precision using K+, Na+, Ca2+, Li+ or Mg2+ ions. Moreover, membrane spacings controlled by one type of cation can efficiently and selectively exclude other cations that have larger hydrated volumes. First-principles calculations and ultraviolet absorption spectroscopy reveal that the location of the most stable cation adsorption is where oxide groups and aromatic rings coexist. Previous density functional theory computations show that other cations (Fe2+, Co2+, Cu2+, Cd2+, Cr2+ and Pb2+) should have a much stronger cation-π interaction with the graphene sheet than Na+ has, suggesting that other ions could be used to produce a wider range of interlayer spacings.

Linalool Induces Resistance Against Tobacco Mosaic Virus in Tobacco Plants.

The essential oil of Cinnamomum camphora is the most widely consumed and used spice in the world today. It has therapeutic effects in medicine and has been shown to have good antibacterial and bacteriostatic effects in agriculture. This study found that C. camphora oil significantly induced plant disease resistance activity. Linalool, its main active component, significantly induced plant disease resistance activity (67.49% at a concentration of 800 µg/ml) over the same concentration of the chitosan oligosaccharide positive control but had no direct effect on tobacco mosaic virus (TMV). In this study of its antiviral mechanism, linalool induced hypersensitive reaction (HR); the overexpression of related defense enzymes SOD, CAT, POD, and PAL; and the accumulation of H2O2 and SA content in N. glutinosa. Besides, linalool induced crops resistance against Colletotrichum lagenarium, Botrytis cinerea, Sclerotinia sclerotiorum, and Phytophthora capsica. Taken together, the anti-TMV mechanism of linalool involved the induction of plant disease resistance through activation of a plant immune response mediated by salicylic acid. Linalool-induced plant disease resistance activity has a long duration, broad spectrum, and rich resources; linalool thus has the potential to be developed as a new plant-derived antiviral agent and plant immune activator.

Electroactive Covalent Organic Framework Enabling Photostimulus-Responsive Devices.

Two-dimensional covalent organic frameworks (2D COFs) feature graphene-type 2D layered sheets but with a tunable structure, electroactivity, and high porosity. If these traits are well-combined, then 2D COFs can be applied in electronics to realize functions with a high degree of complexity. Here, a highly crystalline electroactive COF, BDFamide-Tp, was designed and synthesized. It shows regularly distributed pores with a width of 1.35 nm. Smooth and successive films of such a COF were fabricated and found to be able to increase the conductivity of an organic semiconductor by 103 by interfacial doping. Upon encapsulation of a photoswitchable molecule (spiropyran) into the voids of the COF layer, the resulted devices respond differently to light of different wavelengths. Specifically, the current output ratio after UV vs Vis illumination reaches 100 times, thus effectively creating on and off states. The respective positive and negative feedbacks are memorized by the device and can be reprogrammed by UV/Vis illumination. The reversible photostimulus responsivity and reliable memory of the device are derived from the combination of electroactivity and porosity of the 2D COF. This work shows the capability of 2D COFs in higher-level electronic functions and extends their possible applications in information storage.

Enhanced Separation Performance of Radioactive Cesium and Cobalt in Graphene Oxide Membrane via Cationic Control.

The great applications of nuclear power for the most promising clean energy sources have been challenged by a large amount of radioactive wastewater generated, specifically the Cs+/Co2+ separation for nuclear waste storage, retreatment or recycling of radioactive wastewater, because of their wide difference in half-life and high heat release. In this work, graphene oxide membranes (GOMs) with interlayer spacing controlled by cations were used to separate mixed Cs+/Co2+ ions. The separation factors of Cs+/Co2+ for K+-controlled graphene oxide membranes (K-GOMs) was 2∼3 times higher than that of GOMs without treatment. In addition, the separation factors of Cs+/Co2+ for K-GOMs can be further enhanced with the increase of membranes thickness and change the initial ratios of the two ions. Typically, the separation factors of K-GOMs with a thickness of ∼300 nm reached up to 73.7 ± 3.9. Moreover, the K-GOM showed outstanding stability of the separation performance under long-term operation within 7 days. First-principles calculation revealed that the enhanced ionic selectivity of controlled GOM is induced by the difference of adsorption energies between the hydrated cations and aromatic rings, resulting in a significant increase in the mobility differences between Cs+ and Co2+ through a fixed narrow interlayer spacing. This study demonstrated excellent separation performances of GO-based membranes based on their size-exclusion effect rather than electrostatic repulsion effect, and we believe this work can enable potential efficient treatment technologies for radioactive wastewater needed urgently.

Revisit the Hydrated Cation-π Interaction at the Interface: A New View of Dynamics and Statistics.

Carbon-based matter, such as biomolecules and graphitic structures, often form a liquid-solid/soft matter interface in salt solution and continuously affect the surrounding cations through hydrated cation-π interactions. In this Perspective, we revisit the effect of the hydrated cation-π interactions at the interface using statistical physics, which reveals how hydrated cation-π interactions affect every component dynamically and cause a time-dependent statistical effect at the liquid-solid/soft interface. We also highlight several pieces of experimental evidence from a statistical perspective and discuss the remarkable applications related to environmental protection, industrial manufacturing, and biological sciences.

Exciton Delocalization Counteracts the Energy Gap: A New Pathway toward NIR-Emissive Dyes.

Exciton coupling between the transition dipole moments of ordered dyes in supramolecular assemblies, so-called J/H-aggregates, leads to shifted electronic transitions. This can lower the excited state energy, allowing for emission well into the near-infrared regime. However, as we show here, it is not only the excited state energy modifications that J-aggregates can provide. A bay-alkylated quaterrylene was synthesized, which was found to form J-aggregates in 1,1,2,2-tetrachloroethane. A combination of superradiance and a decreased nonradiative relaxation rate made the J-aggregate four times more emissive than the monomeric counterpart. A reduced nonradiative relaxation rate is a nonintuitive consequence following the 180 nm (3300 cm-1) red-shift of the J-aggregate in comparison to the monomeric absorption. However, the energy gap law, which is commonly invoked to rationalize increased nonradiative relaxation rates with increasing emission wavelength, also contains a reorganization energy term. The reorganization energy is highly suppressed in J-aggregates due to exciton delocalization, and the framework of the energy gap law could therefore reproduce our experimental observations. J-Aggregates can thus circumvent the common belief that lowering the excited state energies results in large nonradiative relaxation rates and are thus a pathway toward highly emissive organic dyes in the NIR regime.

A Highly Conductive All-Carbon Linked 3D Covalent Organic Framework Film.

Here an all-carbon linked 3D covalent organic framework (COF) is introduced by employing a templated surface reaction in a continuous flow (TSRCF). The presented method of synthesis provides spatial control over the reaction chemistry and allows for the creation of ultrasmooth COF films of desired thickness and significant crystallinity. The films show high electrical conductivity (≈3.4 S m-1 ) after being doped with tetracyanoquinodimethane (TCNQ), setting a new record for 3D COF materials. The concurrence of 3D nanosized channels and high conductivity opens up for a number of hitherto unexplored applications for this class of materials, such as high surface area electrodes, electrochemical transistors, and for electronic sensing.

Hydrated cation-π interactions of π-electrons with hydrated Li+, Na+, and K+ cations.

Cation-π interactions are essential for many chemical, biological, and material processes, and these processes usually involve an aqueous salt solution. However, there is still a lack of a full understanding of the hydrated cation-π interactions between the hydrated cations and the aromatic ring structures on the molecular level. Here, we report a molecular picture of hydrated cation-π interactions, by using the calculations of density functional theory (DFT). Specifically, the graphene sheet can distort the hydration shell of the hydrated K+ to interact with K+ directly, which is hereafter called water-cation-π interactions. In contrast, the hydration shell of the hydrated Li+ is quite stable and the graphene sheet interacts with Li+ indirectly, mediated by water molecules, which we hereafter call the cation-water-π interactions. The behavior of hydrated cations adsorbed on a graphene surface is mainly attributed to the competition between the cation-π interactions and hydration effects. These findings provide valuable details of the structures and the adsorption energy of hydrated cations adsorbed onto the graphene surface.

All-Carbon-Linked Continuous Three-Dimensional Porous Aromatic Framework Films with Nanometer-Precise Controllable Thickness.

Inherently porous materials that are chemically and structurally robust are challenging to construct. Conventionally, dynamic chemistry is thought to be needed for the formation of uniform porous organic frameworks, but dynamic bonds can limit the stability of these materials. For this reason, all-carbon-linked frameworks are expected to exhibit higher stability performance than more traditional porous frameworks. However, the limited reversibility of carbon-carbon bond-forming reactions has restricted the exploration of these materials. In particular, the challenges associated with producing uniform thin films of all-carbon-linked frameworks has inhibited the study of these materials in applications where well-defined films are required. Here, we synthesize continuous and homogeneous films of two different all-carbon-linked three-dimensional porous aromatic frameworks with nanometer-precision thickness (PAF-1 and BCMP-2). This was accomplished by kinetically promoting surface reactivity while suppressing homogeneous nucleation. Through connection of the PAF film to a gold substrate via a self-assembled monolayer and use of flow conditions to continually introduce monomers, smooth and continuous PAF films can be grown with controlled thickness. This strategy allows traditional transition metal mediated carbon-carbon cross-coupling reactions to form porous, organic thin films. We expect that the chemical principles uncovered in this study will enable the synthesis of a variety of chemically and structurally diverse carbon-carbon-linked frameworks as high-quality films, which are inaccessible by conventional methods.

Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions.

Alloying is a long-established strategy to tailor properties of metals for specific applications, thus retaining or enhancing the principal elemental characteristics while offering additional functionality from the added elements. We propose a similar approach to the control of properties of two-dimensional transition metal carbides known as MXenes. MXenes (Mn+1Xn) have two sites for compositional variation: elemental substitution on both the metal (M) and carbon/nitrogen (X) sites presents promising routes for tailoring the chemical, optical, electronic, or mechanical properties of MXenes. Herein, we systematically investigated three interrelated binary solid-solution MXene systems based on Ti, Nb, and/or V at the M-site in a M2XTx structure (Ti2-yNbyCTx, Ti2-yVyCTx, and V2-yNbyCTx, where Tx stands for surface terminations) showing the evolution of electronic and optical properties as a function of composition. All three MXene systems show unlimited solubility and random distribution of metal elements in the metal sublattice. Optically, the MXene systems are tailorable in a nonlinear fashion, with absorption peaks from ultraviolet to near-infrared wavelength. The macroscopic electrical conductivity of solid solution MXenes can be controllably varied over 3 orders of magnitude at room temperature and 6 orders of magnitude from 10 to 300 K. This work greatly increases the number of nonstoichiometric MXenes reported to date and opens avenues for controlling physical properties of different MXenes with a limitless number of compositions possible through M-site solid solutions.

One-pot synthesis of folic acid modified carbonized polymer dots with red emittision for selective imaging of cancer cells.

Carbonized polymer dots (CPDs), as a novel fluorescent material, have broad application prospects in the fields of bio-imaging, bio-sensors, disease diagnosis and photovoltaic devices due to their low cost, low toxicity, easy modification and little environmental impact. In this paper, folic acid (FA) modified CPDs (FA-CPDs) are synthesized from p-Phenylenediamine (p-PD) and FA molecules using a traditional one pot hydrothermal reaction in order to detect cancer cells containing a folate receptor (FR). The synthesized FA-CPDs were characterized by transmission electron microscopy, Fourier transfrom infrared spectroscopy, x-ray photoelectron spectroscopy, x-ray diffraction, UV-vis and fluorescence techniques. The red fluorescence emission is realized by doping phosphorus atoms into the carbonized polymer. Upon excitation at 513 nm, the maximum emission wavelength of FA-CPDs aqueous solution was obtained at 613 nm. Moreover, the as-prepared FA-CPDs exhibit excellent excitation-independent behavior and good stability with high quantum yield (QY) at about 30.6%. The binding of FA-CPDs with FRs on cancer cells produces target recognition and enters the cells through endocytosis. Additionally, it is worth noting that FA-CPDs have good biocompatibility and imaging in HeLa cells has been successfully achieved. Therefore, our FA-CPDs have potential applications as biocompatibility probes for cancer diagnosis and treatment.

Unconventional Atomic Structure of Graphene Sheets on Solid Substrates.

The atomic structure of free-standing graphene comprises flat hexagonal rings with a 2.5 Å period, which is conventionally considered the only atomic period and determines the unique properties of graphene. Here, an unexpected highly ordered orthorhombic structure of graphene is directly observed with a lattice constant of ≈5 Å, spontaneously formed on various substrates. First-principles computations show that this unconventional structure can be attributed to the dipole between the graphene surface and substrates, which produces an interfacial electric field and induces atomic rearrangement on the graphene surface. Further, the formation of the orthorhombic structure can be controlled by an artificially generated interfacial electric field. Importantly, the 5 Å crystal can be manipulated and transformed in a continuous and reversible manner. Notably, the orthorhombic lattice can control the epitaxial self-assembly of amyloids. The findings reveal new insights about the atomic structure of graphene, and open up new avenues to manipulate graphene lattices.

Au nanoclusters/porous silica particles nanocomposites as fluorescence enhanced sensors for sensing and mapping of copper(II) in cells.

In this work, we first report Au nanoclusters/porous silica particles nanocomposites as fluorescence enhanced sensors for selective and sensitive detection of Cu (II). As red-emitting GSH-protected Au nanoclusters (Au NCs) were self-assemble into porous silica particles (PSPs) after ultrasonic treatment. As a result, the Au NCs can be immobilized in the nano-channels of PSPs, which leads to the observation of an immobilized induced emission enhancement phenomenon. The photoluminscence (PL) intensity of the nanocomposites can enhance dozens of times compared with Au NCs. As a result, we obtain a novel PL enhanced sensor of Au NCs/PSPs nanocomposites with excellent PL properties. The as-prepared Au NCs/PSPs nanocomposites show good water-solubility, high stability, low toxicity, and exhibit a high PL quenching for reliable, sensitive and selective detection of Cu2+. The limit of detection can reach as low as 1 ppb. What is more, the Au NCs/PSPs nanocomposites also show sensitive detection of Cu2+ in living cells. These properties provide the Au NCs/PSPs nanocomposites with promising PL sensors for Cu2+ detection in various environmental and biological systems.

Precise control of the interlayer spacing between graphene sheets by hydrated cations.

Recently, we have demonstrated that highly efficient ion rejection by graphene oxide membranes can be facilely achieved using hydrated cations to control the interlayer spacing in GO membranes. By using density functional theory calculations, we have shown that different hydrated cations can also precisely control the interlayer spacings between graphene sheets, which are smaller than graphene oxide sheets; this indicates ion sieving. The interlayer distances are 9.35, 8.96 and 8.82 Å for hydrated Li+, Na+ and K+, respectively. Since the radii of the hydrated Na+ and Li+ ions are larger than that of hydrated K+, graphene membranes controlled by the hydrated K+ ion can exclude K+ and the other two cations with larger hydrated volumes. Further analysis of charge transfer and orbit analysis showed that this type of control by the hydrated cations is attributed to the strong hydrated cation-π interactions; moreover, when soaked in a salt solution, graphene membranes adsorb hydrated Na+ and Li+ and form intercalation compounds. However, it is hard to find K-doped intercalation compounds in the inner part of graphene.