RESUMO
Bio-ingestion of microplastics poses a global threat to ecosystems, yet studies within nature reserves, crucial habitats for birds, remain scarce despite the well-documented ingestion of microplastics by avian species. Located in Jiangsu Province, China, the Yancheng Wetland Rare Birds Nature Reserve is home to diverse bird species, including many rare ones. This study aimed to assess the abundance and characteristics of microplastics in common bird species within the reserve, investigate microplastic enrichment across different species, and establish links between birds' habitat types and microplastic ingestion. Microplastics were extracted from the feces of 110 birds, with 84 particles identified from 37.27% of samples. Among 8 species studied, the average microplastic abundance ranged from 0.97 ± 0.47 to 43.43 ± 61.98 items per gram of feces, or 1.5 ± 0.87 to 3.4 ± 1.50 items per individual. The Swan goose (Anser cygnoides) exhibited the highest microplastic abundance per gram of feces, while the black-billed gull (Larus saundersi) had the highest abundance per individual. The predominant form of ingested microplastics among birds in the reserve was fibers, with polyethylene being the most common polymer type. Significant variations in plastic exposure were observed among species and between aquatic and terrestrial birds. This study represents the first quantitative assessment of microplastic concentrations in birds within the reserve, filling a crucial gap in research and providing insights for assessing microplastic pollution and guiding bird conservation efforts in aquatic and terrestrial environments.
Assuntos
Aves , Monitoramento Ambiental , Fezes , Microplásticos , Áreas Alagadas , Animais , China , Microplásticos/análise , Fezes/química , Poluentes Químicos da Água/análise , Conservação dos Recursos NaturaisRESUMO
In this study, (3-mercaptopropyl) triethoxysilane (MPTMS)-modified ordered mesoporous silica (OMS) materials were prepared using a post-grifting method, with MPTMS as the organic functionalized reagent. The OMS materials were analyzed by FT-IR spectra, N2 sorption, and small angle X-ray scattering to evaluate their potential for scavenging Cd2+ from water. Moreover, a (3-mercaptopropyl) triethoxysilane-functionalized ordered mesoporous silica modified polyvinylidene fluoride (MPTMS-OMS/PVDF) membrane was synthesized using the solvent phase inversion method to remediate wastewater containing heavy metal ions. The MPTMS-OMS was characterized by a maximum specific surface area of 422 m2/g, high surface hydrophilicity, and high pure water flux. The MPTMS-OMS/PVDF exhibited a dynamic adsorption capacity for Cd2+ in water. At an MPTMS-OMS content of 5 wt%, the Cd2+ removal efficiency was 90%, whereas the pure PVDF showed no Cd2+ adsorption capacity. These results highlight the potential of the MPTMS-OMS/PVDF membrane to eliminate Cd2+ during the decontamination of aqueous streams containing low-concentrations of contaminants.
Assuntos
Metais Pesados , Dióxido de Silício , Adsorção , Cádmio , Polímeros de Fluorcarboneto , Polivinil , Espectroscopia de Infravermelho com Transformada de Fourier , ÁguaRESUMO
Amorphous MoO3-x nanosheets were fabricated by the room-temperature oxidation of molybdenum powder with H2 O2 , followed by light-irradiation reduction in methanol. When applied as a substrate for surface-enhanced Raman spectroscopy (SERS), these nanosheets exhibit higher sensitivity than the crystalline counterpart for a wide range of analytes. Moreover, the SERS activity remains stable on repeated oxygen insertion/extraction. In contrast, the performance of crystalline MoO3-x continuously deteriorates on successive redox treatments. This unique SERS activity allows the recycling of the substrate through an H2 O2 -based Fenton-like reaction. More importantly, the non-invasive SERS was unprecedentedly used for the self-diagnosis of amorphous MoO3-x as a more selective photocatalyst than its crystalline counterpart.
RESUMO
Ocean acidification (OA) and microplastics (MPs) contamination are two results of human excises. In regions like estuarine areas, OA and MPs exposure are happening at the same time. The current research investigated the synthesized effects of OA and MPs exposure for a medium-term duration on the physiology and energy budget of the thick shell mussel Mytilus coruscus. Mussels were treated by six combinations of three MPs levels (0, 10 and 1000 items L-1) × two pH levels (7.3, 8.1) for 21 d. As a result, under pH 7.3, clearance rate (CR), food absorption efficiency (AE), respiration rate (RR), and scope for growth (SFG) significantly decreased, while the fecal organic dry weight ratio (E) significantly increased. 1000 items L-1 MPs led to decrease of CR, E, SFG and increase of AE under pH 8.1. Interactive effects from combination of pH and MPs were found in terms of CR, AE, E and RR, but not for SFG of M. coruscus.
Assuntos
Mytilus , Animais , Humanos , Concentração de Íons de Hidrogênio , Microplásticos , Mytilus/fisiologia , Plásticos/farmacologia , Água do MarRESUMO
Perfluorooctanoic acid (PFOA), a typical perfluorinated carboxylic acid, is an emerging type of permanent organic pollutants that are regulated by the Stockholm Convention. The degradation of PFOA, however, is quite challenging largely due to the ultra-high stability of C-F bonds. Compared with other techniques, photocatalytic degradation offers the potential advantages of simple operation under mild conditions as well as exceptional decomposition and defluorination efficiency. Titanium dioxide (TiO2) is one of the most frequently used photocatalysts, but so far, the pristine nanosized TiO2 (e.g., the commercial P25) has been considered inefficient for PFOA degradation, since the photo-generated hydroxyl radicals from TiO2 are not able to directly attack C-F bonds. Mesoporous Sb2O3/TiO2 heterojunctions were therefore rationally designed in this work, of which the confined Sb2O3 nanoparticles in mesoporous TiO2 framework could not only tune the band structure and also increase the number of active sites for PFOA degradation. It was found that, after loading Sb2O3, the absorption of UV light was enhanced, indicating a higher efficiency of light utilization; while the band gap was reduced, which accelerated the separation of photo-generated charge carriers; and most importantly, the valence band edge of the Sb2O3/TiO2 heterojunction was significantly lifted so as to prevent the occurrence of hydroxyl radical pathway. Under the optimal ratio of Sb2O3-TiO2, the resulting catalysts managed to remove 81.7% PFOA in 2 h, with a degradation kinetics 4.2 times faster than the commercial P25. Scavenger tests and electron spin resonance spectra further revealed that such improvement was mainly attributed to the formation of superoxide radicals and photo-generated holes, in which the former drove the decarboxylation from C7F15COOH-C7F15 â¢, and the latter promoted the direct electron transfer for the conversion of C7F15COO--C7F15COOâ¢. The Sb2O3/TiO2 photocatalysts were highly recyclable, with nearly 90% of the initial activity being retained after five consecutive cycles, guaranteeing the feasibility of long-term operation.
RESUMO
Although it is well-known that the size can influence the surface plasmon resonance property of coinage metals and the electronic state of the Mott-Schottky junction formed at the metal/semiconductor interface, insights into how the size can be exploited to optimize the photocatalytic activity and selectivity of metal/semiconductor composites are lacking. Here we utilize operando SERS spectroscopy to identify the size effect on the electron-transfer dynamics and the direction at the Au/TiO2 interface. This effect was characterized by the photocatalytic reduction sites of p-nitrothiophenol, which were self-tracked with the SERS spectra from Au nanoparticle and inverse-opal structured TiO2, respectively. The size-dependent unidirectional/bidirectional transfer of photoinduced electrons at the Au/TiO2 interface was revealed by operando SERS spectroscopy, which enables the rational tuning of the reduction selectivity.
RESUMO
Perfluorocarboxylic acids (PFCAs) are an emerging class of persistent organic pollutants. During the fabrication process, it is unavoidable to form PFCA homologs or isomers which exhibit distinct occurrence, bioaccumulation, and toxicity. The precision measurement of PFCAs is therefore of significant importance. However, the existing characterization techniques, such as LC-MS/MS, cannot fully meet the requirement of isomer-specific analysis, largely due to the lack of authentic standards. Single-molecule sensors (SMSs) based on nanopore electrochemistry may be a feasible solution for PFCAs determination, thanks to their ultra-high spatiotemporal resolutions. Hence, as a first step, this work was to elucidate the influence of electrolyte concentration on the four most critical indicators of nanopore measurements, and furthermore, performance of nanopore SMSs. More specifically, three of the most representative short-chain PFCAs, perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA) and perfluoroheptanoic acid (PFHpA), were adopted as the target analytes, aerolysin nanopore was employed as the sensing interface, and 2, 3 and 4 M KCl solutions were used as electrolytes. It was found that, when the concentration of KCl solution increased from 2 to 4 M, the conductance of aerolysin nanopore increased almost linearly at a rate of 0.5 nS per molar KCl within the whole voltage range, the current blockade of PFPeA at -50 mV increased from 61.74 to 66.57% owing to the enhanced steric exclusion effect, the maximum dwell time was more than doubled from 14.5 to 31.5 ms, and the barrier limited capture rate increased by 8.3 times from 0.46 to 3.85 Hz. As a result, when using 4 M KCl as the electrolyte, over 90% of the PFPeA, PFHxA and PFHpA were accurately identified from a mixed sample, and the calculated limit of detection of PFPeA reached 320 nM, more than 24 times lower than in 2 M KCl. It was thus clear that tuning the electrolyte concentration was a simple but very effective approach to improve the performance of nanopore SMSs for PFCAs determination.
RESUMO
A current main issue on conditionals is whether the meaning of general conditionals (e.g., If a card is red, then it is round) is deterministic (exceptionless) or probabilistic (exception-tolerating). In order to resolve the issue, two experiments examined the influence of conditional contexts (with vs. without frequency information of truth table cases) on the reading of general conditionals. Experiment 1 examined the direct reading of general conditionals in the possibility judgment task. Experiment 2 examined the indirect reading of general conditionals in the truth judgment task. It was found that both the direct and indirect reading of general conditionals exhibited the duality: the predominant deterministic semantic reading of conditionals without frequency information, and the predominant probabilistic pragmatic reading of conditionals with frequency information. The context of general conditionals determined the predominant reading of general conditionals. There were obvious individual differences in reading general conditionals with frequency information. The meaning of general conditionals is relative, depending on conditional contexts. The reading of general conditionals is flexible and complex so that no simple deterministic and probabilistic accounts are able to explain it. The present findings are beyond the extant deterministic and probabilistic accounts of conditionals.