Effect of inactivated COVID-19 vaccine on the negative conversion of nucleic acid in asymptomatic or mild patients with COVID-19.

BACKGROUND: Negative conversion of nucleic acid was a key factor in deciding discharge or the end of isolation of asymptomatic or mild COVID-19 patients. We aimed to explore the effect of vaccination on the time to negative conversion after Omicron infection. METHODS: This retrospective cohort study included asymptomatic or mild patients with COVID-19 admitted to Fangcang shelter Hospital from November 10, 2022 to December 2, 2022. The relationship between vaccination status and the time to negative conversion was analyzed by multiple linear regression. RESULTS: A total of 2,104 asymptomatic or mild COVID-19 patients were included in the analysis, of whom 1,963 were vaccinated. The mean time to negative conversion of no vaccination, one dose, two doses, and three doses were 12.57 (5.05), 12.18 (3.46), 11.67 (4.86) and 11.22 (4.02) days, respectively (p = 0.002). Compared with no vaccination, two doses (ß=-0.88, 95% CI: -1.74, -0.02, p = 0.045), and three doses (ß=-1.51, 95% CI: -2.33, -0.70, p < 0.001) were both associated with shorter time to negative conversion. Comparing with two doses, booster dose was associated significantly with shorter time to negative conversion (ß=-0.63, 95% CI: -1.07, -0.20, p = 0.004). Age was positively correlated with the time to negative conversion (ß = 0.04, 95% CI: 0.02, 0.05, p < 0.001). CONCLUSION: Vaccination with inactivated vaccine and booster dose can shorten the time to negative conversion of asymptomatic or mild COVID-19 patients. The significant prolongation of time to negative conversion with increasing age suggests the promotion of vaccination, especially booster dose, particularly in the elderly.

Tailored Properties of Carbon for Supercapacitors by Blending Lignin and Cellulose to Mimic Biomass as Carbonaceous Precursor.

KOH-activated carbon materials prepared from biomass-derived carbon source, cellulose and lignin, were compared. Mixtures of different ratios of cellulose and lignin were used to partially mimic biomass as carbon source. This allows tailoring and optimizing of the KOH activated carbon materials by getting rid of the restriction of the intrinsic proportion of cellulose and lignin in specific biomass. The results indicate that cellulose use results in a more porous structure, whereas lignin use leads to more partially activated graphite structure. The activated carbon material (CL1) prepared from blend of cellulose with lignin in mass ratio of 1 : 1 exhibits a high specific surface area of 2000.39 m2 g-1 , and in TEABF4 /ACN (tetraethylammonium tetrafluoroborate dissolved in acetonitrile) electrolyte it showed a maximum specific capacitance of 136.10 F g-1 , a maximum energy density of 18.11 Wh kg-1 , and a capacitance retention of 85.04 % under current density as high as 15 A g-1 .

An Effective Treatment of Perimenopausal Syndrome by Combining Two Traditional Prescriptions of Chinese Botanical Drugs.

Ethnopharmacological relevance: Two types of traditional Chinese formulas of botanical drugs are prescribed for treating perimenopausal syndrome (PMS), a disorder in middle-aged women during their transition to menopause. One is for treating PMS as kidney deficiency (KD) due to senescence and declining reproductive functions, and the other is for treating it as liver qi stagnation (LQS) in association with stress and anxiety. Despite the time-tested prescriptions, an objective attestation to the effectiveness of the traditional Chinese treatment of PMS is still to be established and the associated molecular mechanism is still to be investigated. Materials and methods: A model for PMS was generated from perimenopausal rats with chronic restraint stress (CRS). The effectiveness of traditional Chinese formulas of botanical drugs and a combination of two of the formulas was evaluated based on 1H NMR plasma metabolomic, as well as behavioral and physiological, indicators. To investigate whether the formulas contained ligands that could compensate for the declining level of estrogen, the primary cause of PMS, the ligand-based NMR technique of saturation transfer difference (STD) was employed to detect possible interacting molecules to estrogen receptors in the decoction. Results: Each prescription of the classical Chinese formula moderately attenuated the metabolomic state of the disease model. The best treatment strategy however was to combine two traditional Chinese formulas, each for a different etiology, to adjust the metabolomic state of the disease model to that of rats at a much younger age. In addition, this attenuation of the metabolomics of the disease model was by neither upregulating the estrogen level nor supplementing an estrogenic compound. Conclusion: Treatment of PMS with a traditional Chinese formula of botanical drugs targeting one of the two causes separately could ameliorate the disorder moderately. However, the best outcome was to treat the two causes simultaneously with a decoction that combined ingredients from two traditional prescriptions. The data also implicated a new paradigm for phytotherapy of PMS as the prescribed decoctions contained no interacting compound to modulate the activity of estrogen receptors, in contrast to the treatment strategy of hormone replacement therapy.

Supercritical fluid assisted synthesis and processing of carbon nanotubes.

Carbon nanotubes (CNTs) constitute one of the most fascinating nanomaterials with specific properties and enormous applications. Taking advantages of the unique properties of supercritical fluids (SCFs), various techniques have been developed to produce and process CNTs and related nanostructured materials when conventional techniques become unviable. Herein we propose a critical review of these SCF based techniques. The most relevant characteristics of each technique and the enabled novel structures and functions which are difficult to accomplish by traditional techniques are highlighted.

Validation of diabetes medication self-efficacy scale in Chinese with type 2 diabetes.

AIMS: Greater diabetes medication self-efficacy has been shown to associate with better medication adherence, which is critical for disease control for people living with type 2 diabetes (T2D). The Diabetes Medication Self-efficacy Scale (DMSS) is a 19-item instrument to measure diabetes medication self-efficacy. The aim of the current study was to translate the DMSS into Chinese and validate the Chinese version of DMSS (CDMSS) among Chinese T2D patients. METHODS: The CDMSS was translated using forward-backward method, and its validity and reliability were assessed among 257 Chinese T2D patients. Exploratory factor analysis, Cronbach's α and Spearman's rank correlation coefficients were used to evaluate the psychometric properties of CDMSS. Receiver operating characteristic analysis was used to assess the discrimination of CDMSS for medication adherence and glycemic control. RESULTS: Exploratory factor analysis has generated a one-factor structure of the 11-item version of CDMSS (CDMSS-11), which accounted for 63.1% of the variance. The Spearman's rank correlation coefficient between the original 19-item and 11-item scale was 0.96. The Cronbach's α for internal consistency was 0.94, and the test-retest reliability coefficient was 0.76. The CDMSS-11 score was significantly correlated with diabetes distress, medication adherence, as well as blood levels of fasting plasma glucose and hemoglobin A1c (both P<0.001). The area under receiver operating characteristic curve and its corresponding 95% CI was 0.79 (0.73-0.84) for medication adherence, and it was 0.65 (0.57-0.72) for better glycemic control. CONCLUSION: The CDMSS-11 is a valid and reliable measure to assess medication self-efficacy among Chinese T2D patients.

Supercritical fluid attachment of palladium nanoparticles on aligned carbon nanotubes.

Nanocomposite materials consisting of Pd nanoparticles deposited on aligned multi-walled carbon nanotubes have been fabricated through hydrogen reduction of palladium-beta-diketone precursor in supercritical carbon dioxide. The supercritical fluid processing allowed deposition of high-density Pd nanoparticles (approximately 5-10 nm) on both as-grown (unfunctionalized) and functionalized (using HNO3 oxidation) nanotubes. However, the wet processing for functionalization results in pre-agglomerated, bundle-shaped nanotubes, thus significantly reducing the effective surface area for Pd particle deposition, although the bundling provides more secure, lock-in-place positioning of nanotubes and Pd catalyst particles. The nanotube bundling is substantially mitigated by Pd nanoparticle deposition on the unfunctionalized and geometrically separated nanotubes, which provides much higher catalyst surface area. Such nanocomposite materials utilizing geometrically secured and aligned nanotubes can be useful for providing much enhanced catalytic activities to chemical and electrochemical reactions (e.g., fuel cell reactions), and eliminate the need for tedious catalyst recovery process after the reaction is completed.

Modification of SiO2 nanowires with metallic nanocrystals from supercritical CO2.

Through hydrogen reduction of metal precursors in supercritical CO2, Cu, and Pd, nanocrystals were deposited onto SiO2 nanowires to form different types of nanostructured materials, including nanocrystal-nanowire, spherical aggregation-nanowire, shell-nanowire composites, and "mesoporous" metals supported by the framework of nanowires. This supercritical fluid deposition technique is an attractive approach for modifying nanowires because of its generality and simplicity; the modified nanowires could be useful as catalysts and for further fabrication of multifunctional composites.

A stepwise loading method to magnetically responsive Pt-Fe3O 4/MCNT catalysts for selective hydrogenation of 3-methylcrotonaldehyde.

Pt-loaded multi-walled carbon nanotubes (Pt/MCNTs) and magnetically responsive Pt-Fe3O4/MCNT catalysts were prepared by a stepwise loading of preformed Pt and Fe3O4 nanoparticles onto multi-walled carbon nanotubes (MCNTs). The structure, composition, and magnetism of the catalysts were characterized by X-ray diffraction (XRD), TEM, H2-O2 titration, inductively coupling plasma-atomic emission spectroscopy (ICP-AES), and superconducting quantum interference device (SQUID) techniques. Ascribed to the well-controlled particle size in the preformed Pt colloids, Pt particles in the consequent Pt/MCNT and Pt-Fe3O4/MCNT catalysts are of high uniformity and dispersion. The prepared Pt catalysts show an excellent catalytic performance in the liquid phase hydrogenation of 3-methylcrotonaldehyde, one of typical α,ß-unsaturated aldehydes. A very high selectivity to 3-methylcrotonalcohol of 98% at a conversion of about 80% was available on the magnetic Pt-Fe3O4/MCNT catalyst. The magnetic catalyst, with good superparamagnetism, can be easily recovered from the liquid phase system under the external magnetic field. Moreover, both the Pt/MCNT and magnetic Pt-Fe3O4/MCNT catalysts show a good recyclability, confirmed by five cycles of reusage.