RESUMO
An ion-based synaptic transistor (synaptor) is designed to emulate a biological synapse using controlled ion movements. However, developing a solid-state electrolyte that can facilitate ion movement while achieving large-scale integration remains challenging. Here, a bio-inspired organic synaptor (BioSyn) with an in situ ion-doped polyelectrolyte (i-IDOPE) is demonstrated. At the molecular scale, a polyelectrolyte containing the tert-amine cation, inspired by the neurotransmitter acetylcholine is synthesized using initiated chemical vapor deposition (iCVD) with in situ doping, a one-step vapor-phase deposition used to fabricate solid-state electrolytes. This method results in an ultrathin, but highly uniform and conformal solid-state electrolyte layer compatible with large-scale integration, a form that is not previously attainable. At a synapse scale, synapse functionality is replicated, including short-term and long-term synaptic plasticity (STSP and LTSP), along with a transformation from STSP to LTSP regulated by pre-synaptic voltage spikes. On a system scale, a reflex in a peripheral nervous system is mimicked by mounting the BioSyns on various substrates such as rigid glass, flexible polyethylene naphthalate, and stretchable poly(styrene-ethylene-butylene-styrene) for a decentralized processing unit. Finally, a classification accuracy of 90.6% is achieved through semi-empirical simulations of MNIST pattern recognition, incorporating the measured LTSP characteristics from the BioSyns.
RESUMO
A novel biomimicked neuromorphic sensor for an energy efficient and highly scalable electronic tongue (E-tongue) is demonstrated with a metal-oxide-semiconductor field-effect transistor (MOSFET). By mimicking a biological gustatory neuron, the proposed E-tongue can simultaneously detect ion concentrations of chemicals on an extended gate and encode spike signals on the MOSFET, which acts as an input neuron in a spiking neural network (SNN). Such in-sensor neuromorphic functioning can reduce the energy and area consumption of the conventional E-tongue hardware. pH-sensitive and sodium-sensitive artificial gustatory neurons are implemented by using two different sensing materials: Al2O3 for pH sensing and sodium ionophore X for sodium ion sensing. In addition, a sensitivity control function inspired by the biological sensory neuron is demonstrated. After the unit device characterization of the artificial gustatory neuron, a fully hardware-based E-tongue that can classify two distinct liquids is demonstrated to show a practical application of the artificial gustatory neurons.
Assuntos
Nariz Eletrônico , Neurônios , Redes Neurais de Computação , Neurônios/fisiologia , Óxidos , Semicondutores , SódioRESUMO
A single transistor neuron (1T-neuron) is demonstrated by using a vertically protruded nanowire from an 8 in. silicon (Si) wafer. The 1T-neuron adopts a gate-all-around structure to completely surround the Si nanowire (Si-NW) to make a floating body and allow aggressive downscaling. The Si-NW is composed of an n+ drain at the top, n+ source at the bottom, and p-type floating body at the middle, which are self-aligned vertically. Thus, it occupies a small footprint area. The gate controls an excitatory/inhibitory function. In addition, myelination of a biological neuron that changes membrane capacitance is mimicked by an inherently asymmetric source/drain structure. Two spiking frequencies at the same input current are controlled by whether the neuron is myelinated or unmyelinated. Using the vertical 1T-neuron, pattern recognition is demonstrated with both measurements and semiempirical circuit simulations. Furthermore, handwritten numbers in the MNIST database are recognized with accuracy of 93% by software-based simulations. Applicability of the vertical 1T-neuron to various neural networks is verified, including a single-layer perceptron, multilayer perceptron, and spiking neural network.
Assuntos
Nanofios , Silício , Redes Neurais de Computação , NeurôniosRESUMO
Realizing a neuromorphic-based artificial visual system with low-cost hardware requires a neuromorphic device that can react to light stimuli. This study introduces a photoresponsive neuron device composed of a single transistor, developed by engineering an artificial neuron that responds to light, just like retinal neurons. Neuron firing is activated primarily by electrical stimuli such as current via a well-known single transistor latch phenomenon. Its firing characteristics, represented by spiking frequency and amplitude, are additionally modulated by optical stimuli such as photons. When light is illuminated onto the neuron transistor, electron-hole pairs are generated, and they allow the neuron transistor to fire at lower firing threshold voltage. Different photoresponsive properties can be modulated by the intensity and wavelength of the light, analogous to the behavior of retinal neurons. The artificial visual system can be miniaturized because a photoresponsive neuronal function is realized without bulky components such as image sensors and extra circuits.
Assuntos
Neurônios , FótonsRESUMO
Reservoir computing can greatly reduce the hardware and training costs of recurrent neural networks with temporal data processing. To implement reservoir computing in a hardware form, physical reservoirs transforming sequential inputs into a high-dimensional feature space are necessary. In this work, a physical reservoir with a leaky fin-shaped field-effect transistor (L-FinFET) is demonstrated by the positive use of a short-term memory property arising from the absence of an energy barrier to suppress the tunneling current. Nevertheless, the L-FinFET reservoir does not lose its multiple memory states. The L-FinFET reservoir consumes very low power when encoding temporal inputs because the gate serves as an enabler of the write operation, even in the off-state, due to its physical insulation from the channel. In addition, the small footprint area arising from the scalability of the FinFET due to its multiple-gate structure is advantageous for reducing the chip size. After the experimental proof of 4-bit reservoir operations with 16 states for temporal signal processing, handwritten digits in the Modified National Institute of Standards and Technology dataset are classified by reservoir computing.
RESUMO
An artificial multisensory device applicable to in-sensor computing is demonstrated with a single-transistor neuron (1T-neuron) for multimodal perception. It simultaneously receives two sensing signals from visual and thermal stimuli. The 1T-neuron transforms these signals into electrical signals in the form of spiking and then fires them for a spiking neural network at the same time. This feature makes it feasible to realize input neurons for multimodal sensing. Visual and thermal sensing is achieved due to the inherent optical and thermal behaviors of the 1T-neuron. To demonstrate a neuromorphic multimodal sensing system with the artificial multisensory 1T-neuron, fingerprint recognition, widely used for biometric security, is implemented. Owing to the simultaneous sensing of heat as well as light, the proposed fingerprint recognition system composed of multisensory 1T-neurons not only identifies a genuine pattern but also judges whether or not it is forged.
RESUMO
A ternary logic system to realize the simplest multivalued logic architecture can enhance energy efficiency compared to a binary logic system by reducing the number of transistors and interconnections. For the ternary logic system, a ternary logic device to harness three stable states is needed. In this study, a vertically integrated complementary metal-oxide-semiconductor ternary logic device is demonstrated by monolithically integrating a thin-film transistor (TFT) over a transistor-based threshold switch (TTS). Because the TFT and the TTS have their own source (S), drain (D), and gate (G), there are physically six electrodes. But the hybrid ternary logic device of the TFT over the TTS has only four electrodes: S, D, GTFT, and GTTS like a single MOSFET. It is because the D of the underlying TTS is electrically tied with the S of the superjacent TFT. By combining an on- and off-state of the TFT and the TTS, ternary logic values of low current ("0"-state), middle current ("1"-state), and high current ("2"-state) are realized. Particularly, static power consumption at the "1"-state is decreased by employing the TTS with low off-state leakage current compared to previously reported other ternary logic devices. In addition, a footprint of the ternary logic device with the vertically overlaying structure that has a framework of "one over the other" can be lowered by roughly twice compared to that with the laterally deployed structure that has an organization of "one alongside the other".
RESUMO
Neuromorphic hardware with a spiking neural network (SNN) can significantly enhance the energy efficiency for artificial intelligence (AI) functions owing to its event-driven and spatiotemporally sparse operations. However, an artificial neuron and synapse based on complex complementary metal-oxide-semiconductor (CMOS) circuits limit the scalability and energy efficiency of neuromorphic hardware. In this work, a neuromorphic module is demonstrated composed of synapses over neurons realized by monolithic vertical integration. The synapse at top is a single thin-film transistor (1TFT-synapse) made of poly-crystalline silicon film and the neuron at bottom is another single transistor (1T-neuron) made of single-crystalline silicon. Excimer laser annealing (ELA) is applied to activate dopants for the 1TFT-synapse at the top and rapid thermal annealing (RTA) is applied to do so for the 1T-neuron at the bottom. Internal electro-thermal annealing (ETA) via the generation of Joule heat is also used to enhance the endurance of the 1TFT-synapse without transferring heat to the 1T-neuron at the bottom. As neuromorphic vision sensing, classification of American Sign Language (ASL) is conducted with the fabricated neuromorphic module. Its classification accuracy on ASL is ≈92.3% even after 204 800 update pulses.
RESUMO
Although SRAM is a well-established type of volatile memory, data remanence has been observed at low temperature even for a power-off state, and thus it is vulnerable to a physical cold boot attack. To address this, an ultra-fast data sanitization method within 5 ns is demonstrated with physics-based simulations for avoidance of the cold boot attack to SRAM. Back-bias, which can control device parameters of CMOS, such as threshold voltage and leakage current, was utilized for the ultra-fast data sanitization. It is applicable to temporary erasing with data recoverability against a low-level attack as well as permanent erasing with data irrecoverability against a high-level attack.
RESUMO
A neuromorphic module of an electronic nose (E-nose) is demonstrated by hybridizing a chemoresistive gas sensor made of a semiconductor metal oxide (SMO) and a single transistor neuron (1T-neuron) made of a metal-oxide-semiconductor field-effect transistor (MOSFET). By mimicking a biological olfactory neuron, it simultaneously detects a gas and encoded spike signals for in-sensor neuromorphic functioning. It identifies an odor source by analyzing the complicated mixed signals using a spiking neural network (SNN). The proposed E-nose does not require conversion circuits, which are essential for processing the sensory signals between the sensor array and processors in the conventional bulky E-nose. In addition, they do not have to include a central processing unit (CPU) and memory, which are required for von Neumann computing. The spike transmission of the biological olfactory system, which is known to be the main factor for reducing power consumption, is realized with the SNN for power savings compared to the conventional E-nose with a deep neural network (DNN). Therefore, the proposed neuromorphic E-nose is promising for application to Internet of Things (IoT), which demands a highly scalable and energy-efficient system. As a practical example, it is employed as an electronic sommelier by classifying different types of wines.
Assuntos
Redes Neurais de Computação , Olfato , Nariz Eletrônico , Neurônios/fisiologia , ÓxidosRESUMO
A mnemonic-opto-synaptic transistor (MOST) that has triple functions is demonstrated for an in-sensor vision system. It memorizes a photoresponsivity that corresponds to a synaptic weight as a memory cell, senses light as a photodetector, and performs weight updates as a synapse for machine vision with an artificial neural network (ANN). Herein the memory function added to a previous photodetecting device combined with a photodetector and a synapse provides a technical breakthrough for realizing in-sensor processing that is able to perform image sensing and signal processing in a sensor. A charge trap layer (CTL) was intercalated to gate dielectrics of a vertical pillar-shaped transistor for the memory function. Weight memorized in the CTL makes photoresponsivity tunable for real-time multiplication of the image with a memorized photoresponsivity matrix. Therefore, these multi-faceted features can allow in-sensor processing without external memory for the in-sensor vision system. In particular, the in-sensor vision system can enhance speed and energy efficiency compared to a conventional vision system due to the simultaneous preprocessing of massive data at sensor nodes prior to ANN nodes. Recognition of a simple pattern was demonstrated with full sets of the fabricated MOSTs. Furthermore, recognition of complex hand-written digits in the MNIST database was also demonstrated with software simulations.
RESUMO
A self-powered artificial mechanoreceptor module is demonstrated with a triboelectric nanogenerator (TENG) as a pressure sensor with sustainable energy harvesting and a biristor as a neuron. By mimicking a biological mechanoreceptor, it simultaneously detects the pressure and encodes spike signals to act as an input neuron of a spiking neural network (SNN). A self-powered neuromorphic tactile system composed of artificial mechanoreceptor modules with an energy harvester can greatly reduce the power consumption compared to the conventional tactile system based on von Neumann computing, as the artificial mechanoreceptor module itself does not demand an external energy source and information is transmitted with spikes in a SNN. In addition, the system can detect low pressures near 3 kPa due to the high output range of the TENG. It therefore can be advantageously applied to robotics, prosthetics, and medical and healthcare devices, which demand low energy consumption and low-pressure detection levels. For practical applications of the neuromorphic tactile system, classification of handwritten digits is demonstrated with a software-based simulation. Furthermore, a fully hardware-based breath-monitoring system is implemented using artificial mechanoreceptor modules capable of detecting wind pressure of exhalation in the case of pulmonary respiration and bending pressure in the case of abdominal breathing.
Assuntos
Robótica , Tato , Mecanorreceptores , Monitorização Fisiológica , Redes Neurais de Computação , Tato/fisiologiaRESUMO
Neuromorphic devices have been extensively studied to overcome the limitations of a von Neumann system for artificial intelligence. A synaptic device is one of the most important components in the hardware integration for a neuromorphic system because a number of synaptic devices can be connected to a neuron with compactness as high as possible. Therefore, synaptic devices using silicon-based memory, which are advantageous for a high packing density and mass production due to matured fabrication technologies, have attracted considerable attention. In this study, a segmented transistor devoted to an artificial synapse is proposed for the first time to improve the linearity of the potentiation and depression (P/D). It is a complementary metal oxide semiconductor (CMOS)-compatible device that harnesses both non-ohmic Schottky junctions of the source and drain for improved weight linearity and double-layered nitride for enhanced speed. It shows three distinct and unique segments in drain current-gate voltage transfer characteristics induced by Schottky junctions. In addition, the different stoichiometries of SixNy for a double-layered nitride is utilized as a charge trap layer for boosting the operation speed. This work can bring the industry potentially one step closer to realizing the mass production of hardware-based synaptic devices in the future.
RESUMO
Cointegration of multistate single-transistor neurons and synapses was demonstrated for highly scalable neuromorphic hardware, using nanoscale complementary metal-oxide semiconductor (CMOS) fabrication. The neurons and synapses were integrated on the same plane with the same process because they have the same structure of a metal-oxide semiconductor field-effect transistor with different functions such as homotype. By virtue of 100% CMOS compatibility, it was also realized to cointegrate the neurons and synapses with additional CMOS circuits. Such cointegration can enhance packing density, reduce chip cost, and simplify fabrication procedures. The multistate single-transistor neuron that can control neuronal inhibition and the firing threshold voltage was achieved for an energy-efficient and reliable neural network. Spatiotemporal neuronal functionalities are demonstrated with fabricated single-transistor neurons and synapses. Image processing for letter pattern recognition and face image recognition is performed using experimental-based neuromorphic simulation.
RESUMO
A ternary logic decoder (TLD) is demonstrated with independently controlled double-gate (ICDG) silicon-nanowire (Si-NW) MOSFETs to confirm a feasibility of mixed radix system (MRS). The TLD is essential component for realization of the MRS. The ICDG Si-NW MOSFET resolves the limitations of the conventional multi-threshold voltage (multi-Vth) schemes required for the TLD. The ICDG Si-NW MOSFETs were fabricated and characterized. Afterwards, their electrical characteristics were modeled and fitted semi-empirically with the aid of SILVACO ATLAS TCAD simulator. The circuit performance and power consumption of the TLD were analyzed using ATLAS mixed-mode TCAD simulations. The TLD showed a power-delay product of 35 aJ for a gate length (LG) of 500 nm and that of 0.16 aJ for LG of 14 nm. Thanks to its inherent CMOS-compatibility and scalability, the TLD based on the ICDG Si-NW MOSFETs would be a promising candidate for a MRS using ternary and binary logic.