RESUMO
Cd isotopes (107Cd and 109Cd) are generated from the silver target body during the bombardment of [18O]water in the routine production of 2-[18F]fluoro-2-deoxy-d-glucose ([18F]FDG) for PET (Positron Emission Tomography) diagnosis. Cadmium isotopes contribute significantly to the total activity of generated impurities and, due to being potentially radiotoxic to living organisms, they should be effectively reduced from FDG to prevent accidental injection of even small concentrations into patients. Purification of the final [18F]FDG can be based on a set of columns, fulfilling various functions in the cleaning process. To assess cadmium impurities and the efficiency of the purification process, a low background gamma spectrometry system with high resolution has been applied. Even activity of 3.5 kBq and 290 kBq has been measured on QMA (Sep-Pak Light Accell Plus QMA) columns for 109Cd and 107Cd isotopes, respectively. 107Cd activity in the five column set was higher than that of 109Cd. The rate of 18F production process was about 1 GBq/min, while that of 107Cd and 109Cd radionuclides was about 4.2 kBq/min and 50 Bq/min respectively. The same purification efficiency of both isotopes has been obtained at each step of the process. The production rate of 107Cd and 109Cd radionuclides was insignificant compared to the 18F production rate. Therefore [18F]FDG final product for use in injections before PET diagnostics was efficiently purified from cadmium radionuclide impurities.