RESUMO
Hard carbon (HC) is a promising anode candidate for Na-ion batteries (NIBs) because of its excellent Na-storage performance, abundance, and low cost. However, a precise understanding of its Na-storage behavior remains elusive. Herein, based on the D2O/H2SO4-based TMS results collected on charged/discharged state HC electrodes, detailed Na-storage mechanisms (the Na-storage states and active sites in different voltage regions), specific SEI dynamic evolution process (formation, rupture, regeneration and loss), and irreversible capacity contribution (dead Na0, NaH, etc.) were elucidated. Moreover, by employing the online electrochemical mass spectrometry (OEMS) to monitor the gassing behavior of HC-Na half-cell during the overdischarging process, a surprising rehydrogen evolution reaction (re-HER) process at around 0.02 V vs Na+/Na was identified, indicating the occurrence of Na-plating above 0 V vs Na+/Na. Additionally, the typical fluorine ethylene carbonate (FEC) additive was demonstrated to reduce the accumulation of dead Na0 and inhibit the re-HER process triggered by plated Na.
RESUMO
Understanding the interfacial hydrogen evolution reaction (HER) is crucial to regulate the electrochemical behavior in aqueous zinc batteries. However, the mechanism of HER related to solvation chemistry remains elusive, especially the time-dependent dynamic evolution of the hydrogen bond (H-bond) under an electric field. Herein, we combine in situ spectroscopy with molecular dynamics simulation to unravel the dynamic evolution of the interfacial solvation structure. We find two critical change processes involving Zn-electroplating/stripping, including the initial electric double layer establishment to form an H2O-rich interface (abrupt change) and the subsequent dynamic evolution of an H-bond (gradual change). Moreover, the number of H-bonds increases, and their strength weakens in comparison with the bulk electrolyte under bias potential during Zn2+ desolvation, forming a diluted interface, resulting in massive hydrogen production. On the contrary, a concentrated interface (H-bond number decreases and strength enhances) is formed and produces a small amount of hydrogen during Zn2+ solvation. The insights on the above results contribute to deciphering the H-bond evolution with competition/corrosion HER during Zn-electroplating/stripping and clarifying the essence of electrochemical window widened and HER suppression by high concentration. This work presents a new strategy for aqueous electrolyte regulation by benchmarking the abrupt change of the interfacial state under an electric field as a zinc performance-enhancement criterion.
RESUMO
In this study, state-of-the-art on-line pyrolysis MS (OP-MS) equipped with temperature-controlled cold trap and on-line pyrolysis GC/MS (OP-GC/MS) injected through high-vacuum negative-pressure gas sampling (HVNPGS) programming are originally designed/constructed to identify/quantify the dynamic change of common permanent gases and micromolecule organics from the anode/cathode-electrolyte reactions during thermal runaway (TR) process, and corresponding TR mechanisms are further perfected/complemented. On LiCx anode side, solid electrolyte interphase (SEI) would undergo continuous decomposition and regeneration, and the R-H+ (e.g., HF, ROH, etc.) species derived from electrolyte decomposition would continue to react with Li/LiCx to generate H2. Up to above 200 °C, the O2 would release from the charged NCM cathode and organic radicals would be consumed/oxidized by evolved O2 to form COx, H2O, and more corrosive HF. On the contrary, charged LFP cathode does not present obvious O2 evolution during heating process and the unreacted flammable/toxic organic species would exit in the form of high temperature/high-pressure (HT/HP) vapors within batteries, indicating higher potential safety risks. Additionally, the in depth understanding of the TR mechanism outlined above provides a clear direction for the design/modification of thermostable electrodes and non-flammable electrolytes for safer batteries.
RESUMO
The prominent problem with graphite anodes in practical applications is the detrimental Li plating, resulting in rapid capacity fade and safety hazards. Herein, secondary gas evolution behavior during the Li-plating process was monitored by online electrochemical mass spectrometry (OEMS), and the onset of local microscale Li plating on the graphite anode was precisely/explicitly detected in situ/operando for early safety warnings. The distribution of irreversible capacity loss (e.g., primary and secondary solid electrolyte interface (SEI), dead Li, etc.) under Li-plating conditions was accurately quantified by titration mass spectroscopy (TMS). Based on OEMS/TMS results, the effect of typical VC/FEC additives was recognized at the level of Li plating. The nature of vinylene carbonate (VC)/fluoroethylene carbonate (FEC) additive modification is to enhance the elasticity of primary and secondary SEI by adjusting organic carbonates and/or LiF components, leading to less "dead Li" capacity loss. Though VC-containing electrolyte greatly suppresses the H2/C2H4 (flammable/explosive) evolution during Li plating, more H2 is released from the reductive decomposition of FEC.
RESUMO
Acting as a passive protective layer, solid-electrolyte interphase (SEI) plays a crucial role in maintaining the stability of the Li-metal anode. Derived from the reductive decomposition of electrolytes (e.g., anion and solvent), the SEI construction presents as an interfacial process accompanied by the dynamic de-solvation process during Li-metal plating. However, typical electrolyte engineering and related SEI modification strategies always ignore the dynamic evolution of electrolyte configuration at the Li/electrolyte interface, which essentially determines the SEI architecture. Herein, by employing advanced electrochemical in situ FT-IR and MRI technologies, we directly visualize the dynamic variations of solvation environments involving Li+-solvent/anion. Remarkably, a weakened Li+-solvent interaction and anion-lean interfacial electrolyte configuration have been synchronously revealed, which is difficult for the fabrication of anion-derived SEI layer. Moreover, as a simple electrochemical regulation strategy, pulse protocol was introduced to effectively restore the interfacial anion concentration, resulting in an enhanced LiF-rich SEI layer and improved Li-metal plating/stripping reversibility.
RESUMO
Electrolyte engineering is crucial for improving cathode electrolyte interphase (CEI) to enhance the performance of lithium-ion batteries, especially at high charging cut-off voltages. However, typical electrolyte modification strategies always focus on the solvation structure in the bulk region, but consistently neglect the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which directly influences the CEI construction. Herein, we reveal an anti-synergy effect between Li+-solvation and interfacial electric field by visualizing the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which determines the concentration of interfacial solvated-Li+. The Li+ solvation in the charging process facilitates the construction of a concentrated (Li+-solvent/anion-rich) interface and anion-derived CEI, while the repulsive force derived from interfacial electric field induces the formation of a diluted (solvent-rich) interface and solvent-derived CEI. Modifying the electrochemical protocols and electrolyte formulation, we regulate the "inflection voltage" arising from the anti-synergy effect and prolong the lifetime of the concentrated interface, which further improves the functionality of CEI architecture.
RESUMO
Electrolyte engineering is a fascinating choice to improve the performance of Li-rich layered oxide cathodes (LRLO) for high-energy lithium-ion batteries. However, many existing electrolyte designs and adjustment principles tend to overlook the unique challenges posed by LRLO, particularly the nucleophilic attack. Here, we introduce an electrolyte modification by locally replacing carbonate solvents in traditional electrolytes with a fluoro-ether. By benefit of the decomposition of fluoro-ether under nucleophilic O-related attacks, which delivers an excellent passivation layer with LiF and polymers, possessing rigidity and flexibility on the LRLO surface. More importantly, the fluoro-ether acts as "sutures", ensuring the integrity and stability of both interfacial and bulk structures, which contributed to suppressing severe polarization and enhancing the cycling capacity retention from 39 % to 78 % after 300â cycles for the 4.8â V-class LRLO. This key electrolyte strategy with comprehensive analysis, provides new insights into addressing nucleophilic challenge for high-energy anionic redox related cathode systems.
RESUMO
Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li2 O, obtaining (Li0.66 Co0.11 â¡0.23 )2 O (CLO) cathode prelithiation agent. The synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O2 , achieving 1642.7â mAh/g~Li2O prelithiation capacity (≈980â mAh/g for prelithiation agent). Coupled 6.5â wt % CLO-based prelithiation agent with LiCoO2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270â Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles.
RESUMO
Both LiFePO4 (LFP) and NaFePO4 (NFP) are phosphate polyanion-type cathode materials, which have received much attention due to their low cost and high theoretical capacity. Substitution of manganese (Mn) elements for LFP/NFP materials can improve the electrochemical properties, but the connection between local structural changes and electrochemical behaviors after Mn substitution is still not clear. This study not only achieves improvements in energy density of LFP and cyclic stability of NFP through Mn substitution, but also provides an in-depth analysis of the structural evolutions induced by the substitution. Among them, the substitution of Mn enables LiFe0.5 Mn0.5 PO4 to achieve a high energy density of 535.3 Wh kg-1 , while NaFe0.7 Mn0.3 PO4 exhibits outstanding cyclability with 89.6% capacity retention after 250 cycles. Specifically, Mn substitution broadens the ion-transport channels, improving the ion diffusion coefficient. Moreover, LiFe0.5 Mn0.5 PO4 maintains a more stable single-phase transition during the charge/discharge process. The transition of NaFe0.7 Mn0.3 PO4 to the amorphous phase is avoided, which can maintain structural stability and achieve better electrochemical performance. With systematic analysis, this research provides valuable guidance for the subsequent design of high-performance polyanion-type cathodes.
RESUMO
As an important component connecting the upper and lower structures of a bridge, bridge bearings can reliably transfer vertical and horizontal loads to a foundation. Bearing capacity needs to be monitored during construction and maintenance. To create an intelligent pot bearing, a portable small spot welding machine is used to weld pipe-type welding strain gauges to the pot bearing to measure strain and force values. The research contents of this paper include the finite element analysis of a basin bearing, optimal arrangement of welding strain gauges, calibration testing, and temperature compensation testing of the intelligent basin bearing of the welding strain gauges. Polynomial fitting is used for the fitting and analysis of test data. The results indicate that the developed intelligent pot bearing has a high-precision force measurement function and that after temperature compensation, the measurement error is within 1.8%. The intelligent pot bearing has a low production cost, and the pipe-type welding strain gauges can be conveniently replaced. The novelty is that the bearing adopts a robust pipe-type welding strain gauge and that automatic temperature compensation is used. Therefore, the research results have excellent engineering application value.
RESUMO
Development of high-energy-density rechargeable battery systems not only needs advanced qualitative characterizations for mechanism exploration but also requires accurate quantification technology to quantitatively elucidate products and fairly assess numerous modification strategies. Herein, as a reliable quantification technology, titration mass spectroscopy (TMS) is developed to accurately quantify O-related anionic redox reactions (Li-O2 battery and nickel-cobalt-manganese (NCM)/Li-rich cathodes), parasitic carbonate deposition and decomposition (derived from air-exposure degradation and electrolyte oxidation), and dead Li0 formation (Li-metal battery and over-discharged graphite anode). TMS technology can harvest key information on products (e.g., quantification of oxidized lattice oxygen and solid electrolyte interphase (SEI)/cathode electrolyte interphase (CEI) components) and guide corresponding design strategy by enhancing understanding of the mechanism (e.g., clearly distinguish the catalytic target of highly oxidative Ni4+ on the NCM cathode). Not limited as a rigid quantification tool for widely known products/mechanisms, TMS technology has been demonstrated as a powerful and versatile tool for the investigations of advanced batteries.
RESUMO
As a full cell system with attractive theoretical energy density, challenges faced by Li-O2 batteries (LOBs) are not only the deficient actual capacity and superoxide-derived parasitic reactions on the cathode side but also the stability of Li-metal anode. To solve simultaneously intrinsic issues, multifunctional fluorinated graphene (CFx, x = 1, F-Gr) was introduced into the ether-based electrolyte of LOBs. F-Gr can accelerate O2- transformation and O2--participated oxygen reduction reaction (ORR) process, resulting in enhanced discharge capacity and restrained O2--derived side reactions of LOBs, respectively. Moreover, F-Gr induced the F-rich and O-depleted solid electrolyte interphase (SEI) film formation, which have improved Li-metal stability. Therefore, energy storage capacity, efficiency, and cyclability of LOBs have been markedly enhanced. More importantly, the method developed in this work to disperse F-Gr into an ether-based electrolyte for improving LOBs' performances is convenient and significant from both scientific and engineering aspects.
RESUMO
Aflatoxin (AF) contamination is a major concern in the food and feed industry because of its prevalence and toxicity. Improved aflatoxin detection methods are still needed. Immunoassays are an important method for total aflatoxin (TAF) analysis in food due to its technical advantages such as high specificity, sensitivity, and simplicity, but require high-quality antibodies. Here, we first review the three ways to prepare high-quality antibodies for TAF immunoassay, second, compare the advantages and disadvantages of antigen synthesis methods for B-group and G-group aflatoxins, and third, describe the status of novel genetic engineering antibodies. This review can provide new methods and ideas for the development of TAF immunoassays.
Assuntos
Aflatoxinas/análise , Análise de Alimentos/métodos , Contaminação de Alimentos/análise , Imunoensaio/métodos , Animais , Anticorpos Monoclonais/biossíntese , Inocuidade dos Alimentos , Humanos , Camundongos , Sensibilidade e Especificidade , Zea maysRESUMO
In this Letter we describe SAR investigation on the cyclopentyl-triazolol-pyrimidine scaffold in pursuit of new oral P2Y12 inhibitors. Different synthetic routes were developed for variations at the cyclopentyl core. Optimization finally led to compound 2d which was advanced into preclinical development based on better potency and safety profile in comparison to ticagrelor.
Assuntos
Ciclopentanos/farmacologia , Antagonistas do Receptor Purinérgico P2Y/farmacologia , Pirimidinas/farmacologia , Receptores Purinérgicos P2Y12/metabolismo , Triazóis/farmacologia , Administração Oral , Animais , Ciclopentanos/administração & dosagem , Ciclopentanos/química , Cães , Relação Dose-Resposta a Droga , Humanos , Estrutura Molecular , Agregação Plaquetária/efeitos dos fármacos , Plasma Rico em Plaquetas/efeitos dos fármacos , Antagonistas do Receptor Purinérgico P2Y/administração & dosagem , Antagonistas do Receptor Purinérgico P2Y/química , Pirimidinas/administração & dosagem , Pirimidinas/química , Ratos , Relação Estrutura-Atividade , Triazóis/administração & dosagem , Triazóis/químicaRESUMO
BACKGROUND: Clopidol is mainly used for the prevention and treatment of coccidiosis, which poses a serious potential hazard to public health, in veterinary medicine. The aim of this study was to prepare monoclonal antibodies (mAbs) against clopidol (CLOP) and develop an immunoassay for detecting CLOP residues in chicken tissues. After derivation, CLOP hapten was conjugated to carrier proteins to synthesize the artificial antigen, and immunized Balb/C mice were employed to screen mAbs. RESULTS: A sensitive hybridoma named C1G3 was screened out and two indirect competitive enzyme-linked immunosorbent assay (icELISA) standard curves were established. For the traditional two-step assay the linear range was from 0.06 to 98 ng mL(-1) , with half-maximal inhibitory concentration (IC50 ) and limit of detection (LOD) values of 2.76 ng mL(-1) and 0.03 ng mL(-1) respectively, while the rapid one-step icELISA had a working range from 0.08 to 102 ng mL(-1) , with IC50 and LOD values of 3.52 ng mL(-1) and 0.03 ng mL(-1) respectively. It was also indicated that a 10-fold dilution in chicken muscles gave an inhibition curve almost the same as that obtained in phosphate-buffered saline. When applied to spiking tests in chicken samples, the correlation coefficient (R(2) ) between concentrations added and measured was 0.9534. CONCLUSION: The results of this study suggest that the immunoassay described is a promising alternative for screening CLOP residues in biological matrices and is suitable for routine diagnostics.
Assuntos
Anticorpos Monoclonais , Clopidol/análise , Ensaio de Imunoadsorção Enzimática/normas , Contaminação de Alimentos/análise , Haptenos , Hibridomas , Carne/análise , Animais , Galinhas , Coccidiostáticos/análise , Dieta , Resíduos de Drogas/análise , Feminino , Haptenos/imunologia , Camundongos Endogâmicos BALB C , Músculos/químicaRESUMO
Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.
RESUMO
Developing sacrificial cathode prelithiation technology to compensate for active lithium loss is vital for improving the energy density of lithium-ion battery full-cells. Li2CO3 owns high theoretical specific capacity, superior air stability, but poor conductivity as an insulator, acting as a promising but challenging prelithiation agent candidate. Herein, extracting a trace amount of Co from LiCoO2 (LCO), a lattice engineering is developed through substituting Li sites with Co and inducing Li defects to obtain a composite structure consisting of (Li0.906Co0.043â«0.051)2CO2.934 and ball milled LiCoO2 (Co-Li2CO3@LCO). Notably, both the bandgap and LiâO bond strength have essentially declined in this structure. Benefiting from the synergistic effect of Li defects and bulk phase catalytic regulation of Co, the potential of Li2CO3 deep decomposition significantly decreases from typical >4.7 to ≈4.25 V versus Li/Li+, presenting >600 mAh g-1 compensation capacity. Impressively, coupling 5 wt% Co-Li2CO3@LCO within NCM-811 cathode, 235 Wh kg-1 pouch-type full-cell is achieved, performing 88% capacity retention after 1000 cycles.
RESUMO
Apoptosis of skin keratinocytes is closely associated with skin problems in humans and natural flavonoids have shown excellent biological activity. Hence, the study of flavonoids against human keratinocyte apoptosis has aroused the interest of numerous researchers. In this study, methyl thiazolyl tetrazolium (MTT) assay and Western blots were used to investigate the skin-protective effect of isoviolanthin, a di-C-glycoside derived from Dendrobium officinale, on hydrogen peroxide (H2O2)-triggered apoptosis of skin keratinocytes. Transcriptome sequencing (RNA-Seq) was used to detect the altered expression genes between the model and treatment group and qRT-PCR was used to verify the accuracy of transcriptome sequencing results. Finally, molecular docking was used to observe the binding ability of isoviolanthin to the selected differential genes screened by transcriptome sequencing. Our results found isoviolanthin could probably increase skin keratinocyte viability, by resisting against apoptosis of skin keratinocytes through downregulating the level of p53 for the first time. By comparing transcriptome differences between the model and drug administration groups, a total of 2953 differential expression genes (DEGs) were identified. Enrichment analysis showed that isoviolanthin may regulate these pathways, such as DNA replication, Mismatch repair, RNA polymerase, Fanconi anemia pathway, Cell cycle, p53 signaling pathway. Last, our results found isoviolanthin has a strong affinity for binding to KDM6B, CHAC2, ESCO2, and IPO4, which may be the potential target for treating skin injuries induced by reactive oxide species. The current study confirms isoviolanthin potential as a skin protectant. The findings may serve as a starting point for further research into the mechanism of isoviolanthin protection against skin damage caused by reactive oxide species (e.g., hydrogen peroxide).
Assuntos
Peróxido de Hidrogênio , Transcriptoma , Humanos , Peróxido de Hidrogênio/farmacologia , Simulação de Acoplamento Molecular , Proteína Supressora de Tumor p53/metabolismo , Queratinócitos , Flavonoides/metabolismo , Apoptose , Acetiltransferases/metabolismo , Acetiltransferases/farmacologia , Proteínas Cromossômicas não Histona/metabolismo , Histona Desmetilases com o Domínio Jumonji/metabolismoRESUMO
Anode-free lithium metal batteries (AF-LMBs) can deliver the maximum energy density. However, achieving AF-LMBs with a long lifespan remains challenging because of the poor reversibility of Li+ plating/stripping on the anode. Here, coupled with a fluorine-containing electrolyte, we introduce a cathode pre-lithiation strategy to extend the lifespan of AF-LMBs. The AF-LMB is constructed with Li-rich Li2Ni0.5Mn1.5O4 cathodes as a Li-ion extender; the Li2Ni0.5Mn1.5O4 can deliver a large amount of Li+ in the initial charging process to offset the continuous Li+ consumption, which benefits the cycling performance without sacrificing energy density. Moreover, the cathode pre-lithiation design has been practically and precisely regulated using engineering methods (Li-metal contact and pre-lithiation Li-biphenyl immersion). Benefiting from the highly reversible Li metal on the Cu anode and Li2Ni0.5Mn1.5O4 cathode, the further fabricated anode-free pouch cells achieve 350 W h kg-1 energy density and 97% capacity retention after 50 cycles.
RESUMO
Cathode electrolyte interphase (CEI) layers derived from electrolyte oxidative decomposition can passivate the cathode surface and prevent its direct contact with electrolyte. The inorganics-dominated inner solid electrolyte layer (SEL) and organics-rich outer quasi-solid-electrolyte layer (qSEL) constitute the CEI layer, and both merge at the junction without a clear boundary, which assures the CEI layer with both ionic-conducting and electron-blocking properties. However, the typical "wash-then-test" pattern of characterizations aiming at the microstructure of CEI layers would dissolve the qSEL and even destroy the SEL, leading to an overanalysis of electrolyte decomposition pathway and misassignment of CEI architecture (e.g., component and morphology). In this study, we established a full-dimensional characterization paradigm (combining Fourier transform infrared, solution NMR, X-ray photoelectron spectroscopy, and mass spectrometry technologies) and reconstructed the original CEI layer model. Besides, the feasibility of this characterization paradigm has been verified in a wide operating voltage range on a typical LiNixMnyCozO2 cathode.