The zinc finger protein Miz1 suppresses liver tumorigenesis by restricting hepatocyte-driven macrophage activation and inflammation.

Chronic inflammation plays a central role in hepatocellular carcinoma (HCC), but the contribution of hepatocytes to tumor-associated inflammation is not clear. Here, we report that the zinc finger transcription factor Miz1 restricted hepatocyte-driven inflammation to suppress HCC, independently of its transcriptional activity. Miz1 was downregulated in HCC mouse models and a substantial fraction of HCC patients. Hepatocyte-specific Miz1 deletion in mice generated a distinct sub-group of hepatocytes that produced pro-inflammatory cytokines and chemokines, which skewed the polarization of the tumor-infiltrating macrophages toward pro-inflammatory phenotypes to promote HCC. Mechanistically, Miz1 sequestrated the oncoprotein metadherin (MTDH), preventing MTDH from promoting transcription factor nuclear factor κB (NF-κB) activation. A distinct sub-group of pro-inflammatory cytokine-producing hepatocytes was also seen in a subset of HCC patients. In addition, Miz1 expression inversely correated with disease recurrence and poor prognosis in HCC patients. Our findings identify Miz1 as a tumor suppressor that prevents hepatocytes from driving inflammation in HCC.

A TNFα/Miz1-positive feedback loop inhibits mitophagy in hepatocytes and propagates non-alcoholic steatohepatitis.

BACKGROUND & AIMS: Non-alcoholic steatohepatitis (NASH) is a chronic inflammatory disease that can further progress to cirrhosis and hepatocellular carcinoma. However, the key molecular mechanisms behind this process have not been clarified. METHODS: We analyzed human NASH and normal liver tissue samples by RNA-sequencing and liquid chromatography-mass spectrometry, identifying hepatocyte cytosolic protein Myc-interacting zinc-finger protein 1 (Miz1) as a potential target in NASH progression. We established a Western diet+fructose-induced NASH model in hepatocyte-specific Miz1 knockout and adeno-associated virus type 8-overexpressing mice. Human NASH liver organoids were used to confirm the mechanism, and immunoprecipitation and mass spectrometry were used to detect proteins that could interact with Miz1. RESULTS: We demonstrate that Miz1 is reduced in hepatocytes in human NASH. Miz1 is shown to bind to peroxiredoxin 6 (PRDX6), retaining it in the cytosol, blocking its interaction with mitochondrial Parkin at Cys431, and inhibiting Parkin-mediated mitophagy. In NASH livers, loss of hepatocyte Miz1 results in PRDX6-mediated inhibition of mitophagy, increased dysfunctional mitochondria in hepatocytes, and production of proinflammatory cytokines, including TNFα, by hepatic macrophages. Crucially, the increased production of TNFα results in a further reduction in hepatocyte Miz1 by E3-ubiquitination. This produces a positive feedback loop of TNFα-mediated hepatocyte Miz1 degradation, resulting in PRDX6-mediated inhibition of hepatocyte mitophagy, with the accumulation of dysfunctional mitochondria in hepatocytes and increased macrophage TNFα production. CONCLUSIONS: Our study identified hepatocyte Miz1 as a suppressor of NASH progression via its role in mitophagy; we also identified a positive feedback loop by which TNFα production induces degradation of cytosolic Miz1, which inhibits mitophagy and thus leads to increased macrophage TNFα production. Interruption of this positive feedback loop could be a strategy to inhibit the progression of NASH. IMPACT AND IMPLICATIONS: Non-alcoholic steatohepatitis (NASH) is a chronic inflammatory disease that can further develop into cirrhosis and hepatocellular carcinoma. However, the key molecular mechanism of this process has not been fully clarified. Herein, we identified a positive feedback loop of macrophage TNFα-mediated hepatocyte Miz1 degradation, resulting in PRDX6-mediated inhibition of hepatocyte mitophagy, aggravation of mitochondrial damage and increased macrophage TNFα production. Our findings not only provide mechanistic insight into NASH progression but also provide potential therapeutic targets for patients with NASH. Our human NASH liver organoid culture is therefore a useful platform for exploring treatment strategies for NASH development.

Macroscopic Gradient Ordered α-Fe/Pr2Fe14B Nanocomposites with Ultrahigh Energy Density.

Nanoparticle self-assembly enables the generation of complex ordered nanostructures with enhanced properties or new functionalities. However, the ordering is often limited to the micrometer scale with chemical strategies due to the relative weak supramolecular interactions that govern the self-assembly process. Here a physical strategy via temperature-gradient-assisted self-assembly is reported to create three-dimensional (3D) macroscopic ordered nanocomposites with different gradient variations in grain size, constituent content, and crystal orientation. The resulting α-Fe/Pr2Fe14B ordered nanostructure with reverse gradients in both the grain size and α-Fe content exhibits a record-high energy density of about 25 MGOe for isotropic α-Fe/Pr2Fe14B systems, approximately 130% higher than that of its disordered counterpart. Both experiments and micromagnetic simulations demonstrate that creating ordered nanostructures is an alternative approach to develop high-performance permanent-magnet materials. Our findings make a significant step toward creating 3D macroscopic ordered nanostructures and will stimulate the development of ordered nanomaterials.

Efficient Probabilistic Computing with Stochastic Perovskite Nickelates.

Probabilistic computing has emerged as a viable approach to solve hard optimization problems. Devices with inherent stochasticity can greatly simplify their implementation in electronic hardware. Here, we demonstrate intrinsic stochastic resistance switching controlled via electric fields in perovskite nickelates doped with hydrogen. The ability of hydrogen ions to reside in various metastable configurations in the lattice leads to a distribution of transport gaps. With experimentally characterized p-bits, a shared-synapse p-bit architecture demonstrates highly parallelized and energy-efficient solutions to optimization problems such as integer factorization and Boolean satisfiability. The results introduce perovskite nickelates as scalable potential candidates for probabilistic computing and showcase the potential of light-element dopants in next-generation correlated semiconductors.

Discotic Liquid Crystal Epoxy Resins Integrating Intrinsic High Thermal Conductivity and Intrinsic Flame Retardancy.

The integration of intrinsic thermal conductivity and intrinsic flame retardancy of epoxy resins shows wider application prospects in electricals and electronics. Discotic liquid crystal epoxy (D-LCE) is synthesized from pyrocatechol, 2-allyloxyethanol, and 3-chloroperoxybenzoic acid. P/Si synergistic flame-retardant co-curing agent (DOPO-POSS, DP) is synthesized from p-hydroxybenzaldehyde, 9, 10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO), and amino terminated polysilsesquioxane (POSS). Finally, D-LCE is cured within liquid crystal range with 4, 4'-diaminodiphenyl methane (DDM) and DP, to obtain intrinsic highly thermal conductive/flame-retardant epoxy resins (D-LCERDP ). D-LCERDP-10.0 (10.0 wt% DP) synchronously possesses excellent intrinsic thermal conductivity and intrinsic flame retardancy, with thermal conductivity coefficient in vertical and parallel direction (λ⊥ and λ∥ ) of 0.34 and 1.30 W m-1 K-1 , much higher than that of general bisphenol A epoxy resin (E-51, λ⊥ of 0.19 W m-1 K-1 , λ∥ of 0.65 W m-1 K-1 ). The limiting oxygen index (LOI) value of D-LCERDP-10.0 reaches 31.1, also better than those of E-51 (19.8) and D-LCER (21.3).

Three-Dimensional Covalent Organic Framework with ceq Topology.

Three-dimensional covalent organic frameworks (3D-COFs) are emerging as designable porous materials because of their unique structural characteristics and porous features. However, because of the lack of 3D organic building units and the less reversible covalent bonds, the topologies of 3D-COFs to date have been limited to dia, ctn, ffc, bor, rra, srs, pts, lon, stp, acs, tbo, bcu, and fjh. Here we report a 3D-COF with the ceq topology utilizing a D3h-symmetric triangular prism vertex with a planar triangular linker. The as-synthesized COF displays a twofold-interpenetrated structure with a Brunauer-Emmett-Teller surface area of 1148.6 m2 g-1. Gas sorption measurements revealed that 3D-ceq-COF could efficiently absorb CO2, CH4, and H2 under a moderate surface area. This work provides new building units and approaches for structural and application exploration of 3D-COFs.

Rewritable Nanoplasmonics through Room-Temperature Phase Manipulations of Vanadium Dioxide.

The interactions between light and plasmonic charge oscillations in conducting materials are important venues for realizing nanoscale light manipulations. Conventional metal-based plasmonic devices lack tunability due to the fixed material permittivities. Here, we show that reconfigurable plasmonic functionalities can be achieved using the spatially controlled phase transitions in strongly correlated oxide films. The experimental results discussed here are enabled by a recently developed scanning probe-based technique that allows a nonvolatile, monoclinic-metal VO2 phase to be reversibly patterned at the nanoscale in ambient conditions. Using this technique, rewritable waveguides, spatially modulated plasmonic resonators, and reconfigurable wire-grid polarizers are successfully demonstrated. These structures, effectively controlling infrared lights through spatially confined mobile carriers, showcase a great potential for building programmable nanoplasmonic devices on correlated oxide platforms.

Electrochemically triggered degradation of silicon membranes for smart on-demand transient electronic devices.

Transient electronics is an emerging technology that enables unique functional transformation or the physical disappearance of electronic devices, and is attracting increasing attention for potential applications in data secured hardware as an ultimate solution against data breaches. Developing smart triggered degradation modalities of silicon (Si) remain the key challenge to achieve advanced non-recoverable on-demand transient electronics. Here, we present a novel electrochemically triggered transience mechanism of Si by lithiation, allowing complete and controllable destruction of Si devices. The depth and microstructure of the lithiation-affected zone over time is investigated in detail and the results suggest a few hours of lithiation is sufficient to create microcracks and significantly promote lithium penetration. Finite element models are proposed to confirm the mechanism. Electrochemically triggered degradation of thin film Si ribbons and Si integrated circuit chips with metal-oxide-semiconductor field-effect transistors from a commercial 0.35 micrometer complementary metal-oxide-semiconductor technology node is performed to demonstrate the potential applications for commercial electronics. This work opens new opportunities for versatile triggered transience of Si-based devices for critical secured information systems and green consumer electronics.

Engineering Bulk, Layered, Multicomponent Nanostructures with High Energy Density.

The precise control of individual components in multicomponent nanostructures is crucial to realizing their fascinating functionalities for applications in electronics, energy-conversion devices, and biotechnologies. However, this control remains particularly challenging for bulk, multicomponent nanomaterials because the desired structures of the constitute components often conflict. Herein, a strategy is reported for simultaneously controlling the structural properties of the constituent components in bulk multicomponent nanostructures through layered structural design. The power of this approach is illustrated by generating the desired structures of each constituent in a bulk multicomponent nanomaterial (SmCo + FeCo)/NdFeB, which cannot be attained with existing methods. The resulting nanostructure exhibits a record high energy density (31 MGOe) for this class of bulk nanocomposites composed of both hard and soft magnetic materials, with the soft magnetic fraction exceeding 20 wt%. It is anticipated that other properties beyond magnetism, such as the thermoelectric and mechanical properties, can also be tuned by engineering such layered architectures.

Controllably Manipulating Three-Dimensional Hybrid Nanostructures for Bulk Nanocomposites with Large Energy Products.

Hybrid nanostructures that comprise two or more nanoscale functional components are fascinating for applications in electronics, energy conversion devices, and biotechnologies. Their performances are strongly dependent on the characteristics of the individual components including the size, morphology, orientation, and distribution. However, it remains challenging to simultaneously control these structural properties in a three-dimensional (3D) hybrid nanostructure. Here, we introduce a robust strategy for concurrently manipulating these characteristics in a bulk SmCo/Fe(Co) nanocomposite. This method can tune nanocrystals in size (down to sub-10 nm), morphology (sphere, rod, or disc), and crystallographic orientation (isotropic or anisotropic). We have therefore achieved the desired nanostructures: oriented hard magnetic SmCo grains and homogeneously distributed soft magnetic Fe(Co) grains with high fractions (∼26 wt %) and small sizes (∼12.5 nm). The resulting anisotropic nanocomposite exhibits an energy product that is approximately 50% greater than that of its corresponding pure SmCo magnet and 35% higher than the reported largest value in isotropic SmCo/Fe(Co) systems. Our findings pave a new way to manipulating 3D hybrid nanostructures in a controllable manner.

Correlated metals as transparent conductors.

The fundamental challenge for designing transparent conductors used in photovoltaics, displays and solid-state lighting is the ideal combination of high optical transparency and high electrical conductivity. Satisfying these competing demands is commonly achieved by increasing carrier concentration in a wide-bandgap semiconductor with low effective carrier mass through heavy doping, as in the case of tin-doped indium oxide (ITO). Here, an alternative design strategy for identifying high-conductivity, high-transparency metals is proposed, which relies on strong electron-electron interactions resulting in an enhancement in the carrier effective mass. This approach is experimentally verified using the correlated metals SrVO3 and CaVO3, which, despite their high carrier concentration (>2.2 × 10(22) cm(-3)), have low screened plasma energies (<1.33 eV), and demonstrate excellent performance when benchmarked against ITO. A method is outlined to rapidly identify other candidates among correlated metals, and strategies are proposed to further enhance their performance, thereby opening up new avenues to develop transparent conductors.

Consistent Thermal Conductivities of Spring-Like Structured Polydimethylsiloxane Composites under Large Deformation.

Flexible and highly thermally conductive materials with consistent thermal conductivity (λ) during large deformation are urgently required to address the heat accumulation in flexible electronics. In this study, spring-like thermal conduction pathways of silver nanowire (S-AgNW) fabricated by 3D printing are compounded with polydimethylsiloxane (PDMS) to prepare S-AgNW/PDMS composites with excellent and consistent λ during deformation. The S-AgNW/PDMS composites exhibit a λ of 7.63 W m-1 K-1 at an AgNW amount of 20 vol%, which is ≈42 times that of PDMS (0.18 W m-1 K-1) and higher than that of AgNW/PDMS composites with the same amount and random dispersion of AgNW (R-AgNW/PDMS) (5.37 W m-1 K-1). Variations in the λ of 20 vol% S-AgNW/PDMS composites are less than 2% under a deformation of 200% elongation, 50% compression, or 180° bending, which benefits from the large deformation characteristics of S-AgNW. The heat-transfer coefficient (0.29 W cm-2 K-1) of 20 vol% S-AgNW/PDMS composites is ≈1.3 times that of the 20 vol% R-AgNW/PDMS composites, which reduces the temperature of a full-stressed central processing unit by 6.8 °C compared to that using the 20 vol% R-AgNW/PDMS composites as a thermally conductive material in the central processing unit.

First­line endocrine therapy for hormone receptor positive and HER­2 negative metastatic breast cancer: A Bayesian network meta­analysis.

Endocrine therapy has become the fundamental treatment option for hormone receptor-positive (HR+) and receptor tyrosine-protein kinase erbB-2-negative (HER2-) metastatic breast cancer (mBC). While treatments incorporating cyclin-dependent kinase (CDK)4 and 6 inhibitors are more prevalent than ever, comparisons among those regimens are scarce. The aim of the present study was to identify the most effective maintenance treatment for patients with HR+ and HER2- mBC. To this end, databases including PubMed, Embase, Cochrane Library, Scopus and Google Scholar were searched from inception to August, 2023. The endpoints comprised overall survival (OS) and progression free survival (PFS). For dichotomous variants, hazard ratios (HRs) and odds ratios (ORs) were generated, while standard mean difference (SMD) was used for consecutive variants by Bayesian network meta-analysis to make pairwise comparisons among regimens, to determine the optimal therapy. These processes were conducted using Rstudio 4.2.2 orchestrated with STATA 17.0 MP. A total of 16 randomized controlled trials including 7,174 patients with 11 interventions were analyzed. Compared with aromatase inhibitor (AI), palbociclib plus AI (PalboAI) exhibited a significantly longer PFS up to the 36th month of follow-up [HR=1.7; 95% credible interval, 1.36-2.16], including on the 3rd [OR=2.22; 95% confidence interval (CI), 1.10-4.47], 6th (OR=2.39; 95% CI, 1.21-4.69), 12th (OR=1.94; 95% CI, 1.34-2.79), 18th (OR=2.38; 95% CI, 1.65-3.44), 24th (OR=2.39; 95% CI, 1.67-3.43), 30th (OR=2.10; 95% CI, 1.62-2.74) and 36th (OR=2.66; 95% CI, 1.37-5.18) month of follow-up. Additionally, abemaciclib plus fulvestrant exhibited significant effects compared with AI alone between 12 and 36 months. Ribociclib plus fulvestrant, ribociclib plus AI and dalpiciclib plus AI exerted significant effects compared with AI alone between 12 and 30 months. Considering the effect on OS and PFS together with adverse reactions, safety, medical compliance and route of administration, PalboAI was found to be the optimal treatment for HR+/HER2-mBC. However, additional head-to-head clinical trials are warranted to confirm these findings.

Fast fabrication of a hierarchical nanostructured multifunctional ferromagnet.

Materials with multifunctionality affect society enormously. However, the inability to surmount multiple functionality trade-offs limits the discovery of next-generation multifunctional materials. Departing from conventional alloying design philosophy, we present a hierarchical nanostructure (HNS) strategy to simultaneously break multiple performance trade-offs in a material. Using a praseodymium-cobalt (PrCo5) ferromagnet as a proof of concept, the resulting HNS outperforms contemporary high-temperature ferromagnets with a 50 to 138% increase in electrical resistivity while achieving their highest energy density. Our strategy also enables an exceptional thermal stability of coercivity (-0.148%/°C)-a key characteristic for device accuracy and reliability-surpassing that of existing commercial rare-earth magnets. The multifunctionality stems from the deliberately introduced nanohierarchical structure, which activates multiple micromechanisms to resist domain wall movement and electron transport, offering an advanced design concept for multifunctional materials.

Perspective and Prospects for Ordered Functional Materials.

Many functional materials are approaching their performance limits due to inherent trade-offs between essential physical properties. Such trade-offs can be overcome by engineering a material that has an ordered arrangement of structural units, including constituent components/phases, grains, and domains. By rationally manipulating the ordering with abundant structural units at multiple length scales, the structural ordering opens up unprecedented opportunities to create transformative functional materials, as amplified properties or disruptive functionalities can be realized. In this perspective article, a brief overview of recent advances in the emerging ordered functional materials across catalytic, thermoelectric, and magnetic materials regarding the fabrication, structure, and property is presented. Then the possibility of applying this structural ordering strategy to highly efficient neuromorphic computing devices and durable battery materials is discussed. Finally, remaining scientific challenges are highlighted, and the prospects for ordered functional materials are made. This perspective aims to draw the attention of the scientific community to the emerging ordered functional materials and trigger intense studies on this topic.

Temperature and pressure-mediated structural transition of ZnS nanoparticles.

We demonstrate that the structural transition of ZnS nanoparticles from sphalerite to wurtzite is influenced by high pressures and temperatures. Under the pressure of 1 GPa, the structural transition of ZnS nanoparticles commences at 250 degrees C, much lower than that 400-500 degrees C for ZnS nanoparticles under normal pressures. With the increase of the annealing temperature, the transition is enhanced then inhibited with a maximum transition fraction of 14% at 300 degrees C and disappears at 500 degrees C. At the annealing temperature of 300 degrees C, the structural transition of ZnS nanoparticles keeps almost invariable with the increase of the pressure from 0.6 GPa to 1 GPa. The mechanism for the phenomenon is discussed.

Preparation of sodium alginate/konjac glucomannan active films containing lycopene microcapsules and the effects of these films on sweet cherry preservation.

In this study, lycopene microcapsules (LMs) were prepared using chitosan (CS) and carboxymethyl CS (CMCS) as the wall materials. Sodium alginate (SA) and konjac glucomannan (KGM) were used as substrates to fabricate LM/SA/KGM composite films. Results showed that when 2.0 % CMCS was employed, the resulting LMs had the maximum embedding rate of 83.17 %, smallest particle sizes, and stable zeta potentials. The LMs still had a high retention rate after 10 days of storage at 4 and 25 °C. When 2.0 % LMs were used, the corresponding composite film exhibited the best antibacterial properties, oxidation resistance, a high transparency (82.3 %), and a strong water vapor barrier (2.39 × 10-10 g/m·s·Pa). Finally, the effects of the as-prepared composite films on the preservation of sweet cherries stored at 0 °C for 15 days were investigated. The results indicated that the LM/SA/KGM composite film effectively prolonged the shelf lives of sweet cherries and efficiently delayed the decline in the decay rate, pH, contents of soluble solids, and other indicators. The application of LM/SA/KGM composite films in fruit and vegetable preservation has development prospects and provides a reference for expanding the application range of lycopene and enhancing fruit and vegetable preservation.

Engineered EGCG-Containing Biomimetic Nanoassemblies as Effective Delivery Platform for Enhanced Cancer Therapy.

Nano-based immunotherapy of therapeutic biomolecules is attractive but tremendously hampered by the poor delivery efficiency. This study reports a novel delivery system of fluorinated-coordinative-epigallocatechin gallate (EGCG), referring as FEGCG/Zn, through the integration of fluorination and zinc ions (Zn2+ ) into EGCG. The robust therapeutics of FEGCG/Zn are measured in terms of the regulating effect on programmed cell death ligand 1 (PD-L1), the effective delivery of diverse biomolecules, and the hitchhiking ability using living cells. Taking small interfering RNA of PD-L1 (siPD-L1) and erythrocytes as an example, the fabricated biomimetic system achieves excellent siPD-L1 delivery and further improves siPD-L1 accumulation in tumors. Finally, the combination of FEGCG/Zn and siPD-L1 promotes antitumor immunotherapy through alleviation of T cells exhaustion by regulating PD-L1 expression in tumor cells. The results demonstrate that FEGCG/Zn substantially regulates PD-L1 expression and improves immune-biomolecule delivery by forming biomimetic nanoassemblies, offering a versatile platform for cancer immunotherapy.

TOX deficiency facilitates the differentiation of IL-17A-producing γδ T cells to drive autoimmune hepatitis.

The specification of the αß/γδ lineage and the maturation of medullary thymic epithelial cells (mTECs) coordinate central tolerance to self-antigens. However, the mechanisms underlying this biological process remain poorly clarified. Here, we report that dual-stage loss of TOX in thymocytes hierarchically impaired mTEC maturation, promoted thymic IL-17A-producing γδ T-cell (Tγδ17) lineage commitment, and led to the development of fatal autoimmune hepatitis (AIH) via different mechanisms. Transfer of γδ T cells from TOX-deficient mice reproduced AIH. TOX interacted with and stabilized the TCF1 protein to maintain the balance of γδ T-cell development in thymic progenitors, and overexpression of TCF1 normalized αß/γδ lineage specification and activation. In addition, TOX expression was downregulated in γδ T cells from AIH patients and was inversely correlated with the AIH diagnostic score. Our findings suggest multifaceted roles of TOX in autoimmune control involving mTEC and Tγδ17 development and provide a potential diagnostic marker for AIH.

Manipulating Offense and Defense Signaling to Fight Cold Tumors with Carrier-Free Nanoassembly of Fluorinated Prodrug and siRNA.

Chemoimmunotherapy has shown great potential to activate an immune response, but the immunosuppressive microenvironment associated with T cell exhaustion remains a challenge in cancer therapy. The proper immune-modulatory strategy to provoke a robust immune response is to simultaneously regulate T-cell exhaustion and infiltration. Here, a new kind of carrier-free nanoparticle is developed to simultaneously deliver chemotherapeutic drug (doxorubicin, DOX), cytolytic peptide (melittin, MPI), and anti-TOX small interfering RNA (thymocyte selection-associated high mobility group box protein, TOX) using a fluorinated prodrug strategy. In this way, the enhanced immunogenic cell death (ICD) induced by the combination of DOX and MPI can act as "offense" signaling to increase CD8+ T-cell infiltration, while the decreased TOX expression interfered with siTOX can serve as "defense" signaling to mitigate CD8+ T-cell exhaustion. As a result, the integration of DOX, MPI, and siTOX in such a bifunctional system produced a potent antitumor immune response in liver cancer and metastasis, making it a promising delivery platform and effective strategy for converting "cold" tumors into "hot" ones.