Effects of Connectivity Isomerization on Electron Transport Through Thiophene Heterocyclic Molecular Junction.

Connectivity isomerization of the same aromatic molecular core with different substitution positions profoundly affects electron transport pathways and single-molecule conductance. Herein, we designed and synthesized all connectivity isomers of a thiophene (TP) aromatic ring substituted by two dihydrobenzo[b]thiophene (BT) groups with ethynyl spacers (m,n-TP-BT, (m,n = 2,3; 2,4; 2,5; 3,4)), to systematically probe how connectivity contributes to single-molecule conductance. Single-molecule conductance measurements using a scanning tunneling microscopy break junction (STM-BJ) technique show ∼12-fold change in conductance values, which follow an order of 10-4.83 G0 (2,4-TP-BT) < 10-4.78 G0 (3,4-TP-BT) < 10-4.06 G0 (2,3-TP-BT) < 10-3.75 G0 (2,5-TP-BT). Electronic structure analysis and theoretical simulations show that the connectivity isomerization significantly changes electron delocalization and HOMO-LUMO energy gaps. Moreover, the connectivity-dependent molecular structures lead to different quantum interference (QI) effects in electron transport, e.g., a strong destructive QI near E = EF leads the smallest conductance value for 2,4-TP-BT. This work proves a clear relationship between the connectivity isomerization and single-molecule conductance of thiophene heterocyclic molecular junctions for the future design of molecular devices.

Visualizing an Electrochemically Induced Radical Cation of Bipyridine at Au(111)/Ionic Liquid Interfaces toward a Single-Molecule Switch.

Room-temperature ionic liquids (RTILs) emerged as ideal solvents, and bipyridine as one of the most used ligands have been widely employed in surface science, catalysis, and molecular electronics. Herein, in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) and STM break junction (STM-BJ) technique has been employed to probe the electrochemical process of bipyridine at Au(111)/IL interfaces. It is interestingly found that these molecules undertake a redox process with a pair of well-defined reversible peaks in cyclic voltammograms (CVs). The spectroscopic evidence shows a radical cation generated with rising new Raman peaks related to parallel CC stretching of a positively charged pyridyl ring. Furthermore, these electrochemically charged bipyridine is also confirmed by electrochemical STM-BJ at the single-molecule level, which displays a binary conductance switch ratio of about 400% at the redox potentials. This present work offers a molecular-level insight into the pyridine-mediated reaction process and electron transport in RTILs.

In Situ Raman Monitoring of Potential-Dependent Adlayer Structures on the Au(111)/Ionic Liquid Interface.

Probing the adlayer structures on an electrode/electrolyte interface is one of the most important tasks in modern electrochemistry for clarifying the electrochemical processes. Herein, we have combined cyclic voltammetry and electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy techniques to explore the potential-dependent adlayer structures on Au(111) in a room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6) without or with pyridine (Py). It is clearly found that the BMI+ cations strongly adsorb on the negatively charged surface with a flat-lying orientation, leaving a little space for Py adsorption. Upon increasing the potentials of the electrode, the variations of Raman band intensities and frequencies reveal that the interaction between the BMI+ cations and the Au surface becomes weak; meanwhile, the Py adsorption becomes strong, and its geometry turns from flat, tilted to vertical. Finally, BMI+ cations desorb and leave plenty of surface sites for Py adsorption in bulk solution, and a N-bonded compact Py adlayer is formed on the very positively charged surface. This causes obvious anodic peaks in cyclic voltammograms, and the peak currents increase with the square root of the scanning rate. The present work provides a fair molecular-level understanding of electrochemical interfaces and molecular adsorption of Py in ionic liquids.

Electrochemically activated carbon-halogen bond cleavage and C-C coupling monitored by in situ shell-isolated nanoparticle-enhanced Raman spectroscopy.

The electroreductive cleavage of carbon-halogen bonds has attracted increasing attention in both electrosynthesis and pollution remediation. Herein, by employing the in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique, we have successfully investigated the electroreductive dehalogenation process of aryl halides with the thiol group on a smooth Au electrode in aqueous solution at different pH values. The obtained potential-dependent Raman spectra directly reveal a mixture of the reduction products 4,4'-biphenyldithiol (BPDT) and thiophenol (TP). The conversion ratios of the C-Cl and C-Br bonds at pH = 7 are 37% and 55%, respectively. Furthermore, quantitative analysis of the intensity variations of ν(C-Cl), ν(C-Br) and aromatic ν(CC) stretching modes suggests electroreductive dehalogenation via both direct electron transfer reduction and electrocatalytic hydrodehalogenation. Molecular evidence for the C-C cross coupling process through TP reaction with benzene free radical intermediates is found at negative potentials, which leads to the increasing selectivity of biphenyl products.

Probing Interfacial Electronic Effects on Single-Molecule Adsorption Geometry and Electron Transport at Atomically Flat Surfaces.

Clarifying interfacial electronic effects on molecular adsorption is significant in many chemical and biochemical processes. Here, we used STM breaking junction and shell-isolated nanoparticle-enhanced Raman spectroscopy to probe electron transport and adsorption geometries of 4,4'-bipyridine (4,4'-BPY) at Au(111). Modifying the surface with 1-butyl-3-methylimidazolium cation-containing ionic liquids (ILs) decreases surface electron density and stabilizes a vertical orientation of pyridine through nitrogen atom σ-bond interactions, resulting in uniform adsorption configurations for forming molecular junctions. Modulation from vertical, tilted, to flat, is achieved on adding water to ILs, leading to a new peak ascribed to CC stretching of adsorbed pyridyl ring and 316 % modulation of single-molecule conductance. The dihedral angle between adsorbed pyridyl ring and surface decreases with increasing surface electronic density, enhancing electron donation from surface to pyridyl ring.

Comparative Study of Single Molecular Junctions with Para-Phthalic Acid and Meta-Phthalic Acid Binding to Different Metal Electrodes.

In this paper, single molecular junctions of Para-phthalic acid and Meta-phthalic acid with Au electrodes were studied by STM break junction approach. Conductance values of 10-3.55 G0 and 10-3.70 G0 were found for Para-phthalic acid and Meta-phthalic acid, respectively. The conductance order between Para-phthalic acid and Meta-phthalic acid with Au is different from that with Cu, which can be contributed to the different coupling between molecules and electrodes; different through-space interaction is proposed for such phenomenon between Cu and Au electrodes. Furthermore, the breaking off distances can reflect the length of molecules. The current work presents the important role of electrode in single molecular junctions with different position anchoring groups.

Controlling and Observing Sharp-Valleyed Quantum Interference Effect in Single Molecular Junctions.

The ability to control over the quantum interference (QI) effect in single molecular junctions is attractive in the application of molecular electronics. Herein we report that the QI effect of meta-benzene based molecule with dihydrobenzo[ b]thiophene as the anchoring group ( meta-BT) can be controlled by manipulating the electrode potential of the junctions in electrolyte while the redox state of the molecule does not change. More than 2 orders of magnitude conductance change is observed for meta-BT ranging from <10-6.0 to 10-3.3 G0 with varying the electrode potential, while the upper value is even larger than the conductance of para-BT ( para-benzene based molecule with anchoring group of dihydrobenzo[ b]thiophene). This phenomenon is attributed to the shifting of energy level alignment between the molecule and electrodes under electrode potential control. Calculation is carried out to predict the transmission function of single molecular junction and the work function of Au surface in the presence of the molecule, and good agreement is found between theory and experiments, both showing sharp-valley featured destructive QI effect for the meta-BT. The present work demonstrates that the QI effect can be tuned through electrochemical gating without change of molecular redox states, which provides a feasible way toward realization of effective molecular switches.

Conductance Measurement of Pyrazine Molecular Junction with Cu and Ag Electrodes.

We have measured the conductance of pyrazine molecular junction contacting with Cu and Ag electrodes by using an electrochemical jump-to-contact based scanning tunneling microscopy break junction (ECSTM-BJ). While conductance values of 10-2.8 and 10-3.7 G0 are measured for pyrazineCu electrode, 10-2.1 and 10-3.3 G0 are found for pyrazine-Ag contact. The result shows that the conductance of pyrazine with Ag electrode is larger than that with Cu electrode, which can contribute to the different efficiency of electron transport along the molecular junction between Ag and Cu electrodes. The current work shows the important role for the electrode material in electron transport.

Detecting Electron Transport of Amino Acids by Using Conductance Measurement.

The single molecular conductance of amino acids was measured by a scanning tunneling microscope (STM) break junction. Conductance measurement of alanine gives out two conductance values at 10-1.85 G0 (1095 nS) and 10-3.7 G0 (15.5 nS), while similar conductance values are also observed for aspartic acid and glutamic acid, which have one more carboxylic acid group compared with alanine. This may show that the backbone of NH2-C-COOH is the primary means of electron transport in the molecular junction of aspartic acid and glutamic acid. However, NH2-C-COOH is not the primary means of electron transport in the methionine junction, which may be caused by the strong interaction of the Au-SMe (methyl sulfide) bond for the methionine junction. The current work reveals the important role of the anchoring group in the electron transport in different amino acids junctions.

Enhancing electron transport in molecular wires by insertion of a ferrocene center.

We have determined the conductance of alkane-linked ferrocene molecules with carboxylic acid anchoring groups using the STM break junction technique, and three sets of conductance values were found, i.e. high conductance (HC), medium conductance (MC) and low conductance (LC) values. The enhancing effect of the incorporated ferrocene on the electron transport in saturated alkane molecular wires is demonstrated by the increased conductance of the ferrocene molecules, attributed to the reduction of the tunneling barrier and the HOMO-LUMO gap induced by the insertion of ferrocene. Furthermore, the electron-withdrawing carbonyl group on the unconjugated backbone has little or no influence on single-molecule conductance. The current work provides a feasible approach for the design of high-performance molecular wires.

Rapid detection of trace nitrobenzene in water via SERS using a portable Raman spectrometer.

Nitrobenzene is currently the most widely used explosive substance, and is known for its high toxicity and mutagenicity. It can cause severe environmental and water pollution, posing a risk to public health. Among various explosives analysis methods, surface-enhanced Raman spectroscopy (SERS) has the advantages of fast analysis speed, low detection cost, and easy operation, and has become one of the most promising analytical detection methods. Here, we present a portable and reliable sol-based SERS method for the detection of trace amounts of 2,4,6-trinitrotoluene (TNT) in different water bodies. The Meisenheimer complex formed by nitrobenzene and hydrazine hydrate can assemble on unmodified Au nanoparticles in a sol via Au-N bonds, enabling rapid detection of TNT in seawater, lake water, and tap water using a portable Raman spectrometer. Experimental results show that this SERS method can complete the detection within a few minutes and the detection sensitivity can reach 0.01 mg L-1, which is far lower than China's national standard of no more than 0.5 mg L-1. Furthermore, this method was also successfully applied to detect trace 2,4-dinitrotoluene (2,4-DNT) and picric acid (2,4,6-trinitrophenol) in water, demonstrating its strong applicability for on-site detection of nitrobenzene explosives.

In situ Raman monitoring of electroreductive dehalogenation of aryl halides at an Ag/aqueous solution interface.

Electroreductive dehalogenation as an efficient and green approach has attracted much attention in pollution remediation. Herein, we have employed a shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique to in situ probe the electroreductive dehalogenation process of aryl halides with thiol groups at Ag/aqueous solution interfaces. It is found that 4-bromothiophenol (BTP) and 4-chlorothiophenol (CTP) can turn into mixed products of 4,4'-biphenyldithiol (BPDT) and thiophenol (TP) as the electrode potential decreases. The conversion ratios estimated from the Raman intensity variations of C-Cl and C-Br vibrations are 44% and 58% for CTP and BTP in neutral solution, respectively. Furthermore, the quantitative analysis of benzene ring vibrations reveals a C-C cross coupling between the benzene free radical intermediate and adjacent TP product, which results in increased selectivity for biphenyl products at negative potentials.

Local cation-tuned reversible single-molecule switch in electric double layer.

The nature of molecule-electrode interface is critical for the integration of atomically precise molecules as functional components into circuits. Herein, we demonstrate that the electric field localized metal cations in outer Helmholtz plane can modulate interfacial Au-carboxyl contacts, realizing a reversible single-molecule switch. STM break junction and I-V measurements show the electrochemical gating of aliphatic and aromatic carboxylic acids have a conductance ON/OFF behavior in electrolyte solution containing metal cations (i.e., Na+, K+, Mg2+ and Ca2+), compared to almost no change in conductance without metal cations. In situ Raman spectra reveal strong molecular carboxyl-metal cation coordination at the negatively charged electrode surface, hindering the formation of molecular junctions for electron tunnelling. This work validates the critical role of localized cations in the electric double layer to regulate electron transport at the single-molecule level.

Recent Advances in Single-Molecule Sensors Based on STM Break Junction Measurements.

Single-molecule recognition and detection with the highest resolution measurement has been one of the ultimate goals in science and engineering. Break junction techniques, originally developed to measure single-molecule conductance, recently have also been proven to have the capacity for the label-free exploration of single-molecule physics and chemistry, which paves a new way for single-molecule detection with high temporal resolution. In this review, we outline the primary advances and potential of the STM break junction technique for qualitative identification and quantitative detection at a single-molecule level. The principles of operation of these single-molecule electrical sensing mainly in three regimes, ion, environmental pH and genetic material detection, are summarized. It clearly proves that the single-molecule electrical measurements with break junction techniques show a promising perspective for designing a simple, label-free and nondestructive electrical sensor with ultrahigh sensitivity and excellent selectivity.

Tuning the binding configurations of single-molecule junctions by molecular co-assembly.

Significant variability issues in metal-molecule contacts, such as adsorption geometry, lead to characteristic variability in the electrical responses of individual molecules. Herein, co-assembling 1-ethylimidazole (EIM) on Au(111) has been shown to be a feasible and effective strategy for tuning the binding configurations of pyridine-linked molecular junctions in the most common aqueous environments and atmospheric environments. The single-molecule conductance measurements clearly show a transition from multiple conductance peaks to a single conductance peak with increasing EIM concentration. Raman spectroscopy and DFT calculations suggest that the thermodynamically favorable EIM adsorbate results in the vertical orientation of the bipyridine.

Enhanced Gating Performance of Single-Molecule Conductance by Heterocyclic Molecules.

Enhancing the gating performance of single-molecule conductance is significant for realizing molecular transistors. Herein, we report a new strategy to improve the electrochemical gating efficiency of single-molecule conductance with fused molecular structures consisting of heterocyclic rings of furan, thiophene, or selenophene. One order magnitude of gating ratio is achieved within a potential window of 1.2 V for the selenophene-based molecule, which is significantly greater than that of other heterocyclic and benzene ring molecules. This is caused by the different electronic structures of heterocyclic molecules and transmission coefficients T(E), and preliminary resonance tunneling is achieved through the highest occupied molecular orbital at high potential. The current work experimentally shows that electrochemical gating performance can be significantly modulated by the alignment of the conducting orbital of the heterocyclic molecule relative to the metal Fermi energy.

Mechanically Induced Switching between Two Discrete Conductance States: A Potential Single-Molecule Variable Resistor.

The fabrication of solid-state single-molecule switches with high on-off conductance ratios has been proposed to advance conventional technology in areas such as molecular electronics. Herein, we employed the scanning tunneling microscope break junction (STM-BJ) technique to modulate conductance in single-molecule junctions using mechanically induced stretching. Compound 1a possesses two dihydrobenzothiophene (DHBT) anchoring groups at the opposite ends linked with rigid alkyne side arms to form a gold-molecule-gold junction, while 1b contains 4-pyridine-anchoring groups. The incorporation of ferrocene into the backbone of each compound allows rotational freedom to the cyclopentadienyl (Cp) rings to give two distinct conductance states (high and low) for each. Various control experiments and suspended junction compression/retraction measurements indicate that these high- and low-conductance plateaus are the results of conformational changes within the junctions (extended and folded states) brought about by mechanically induced stretching. A high-low switching factor of 42 was achieved for 1a, whereas an exceptional conductance ratio in excess of 2 orders of magnitude (205) was observed for 1b. To the best of our knowledge, this is the highest experimental on-off conductance switching ratio for a single-molecule junction exploiting the mechanically induced STM-BJ method. Computational studies indicated that the two disparate conductance states observed for 1a and 1b result from mechanically induced conformational changes due to an interplay between conductance and the dihedral angles associated with the electrode-molecule interfaces. Our study reveals the structure-function relationship that determines conductance in such flexible and dynamic systems and promotes the development of a single-molecule variable resistor with high on-off switching factors.

z-Piezo Pulse-Modulated STM Break Junction: Toward Single-Molecule Rectifiers with Dissimilar Metal Electrodes.

Fabricating single-molecule junctions with asymmetric metal electrodes is significant for realizing single-molecule diodes, but it remains a big challenge. Herein, we develop a z-piezo pulse-modulated scanning tunneling microscopy break junction (STM-BJ) technique to construct a robust asymmetric junction with different metal electrodes. The asymmetric Ag/BPY-EE/Au single-molecule junctions exhibit a middle conductance value in between those of the two individual symmetric metal electrode junctions, which is consistent with the order of calculated energy-dependent transmission coefficient T(E) of the asymmetric junctions at EF. Furthermore, the single-molecule conductance of Ag/BPY-EE/Au decreases by about 70% when reversing the bias voltage from 100 to -100 mV, and a clear asymmetric I-V feature at the single-molecule level is observed for these junctions. This rectifying behavior could be ascribed to a different interfacial coupling of molecules at the two end electrodes, which is confirmed by the different displacement of T(E) at the two bias voltages. Other asymmetric junctions exhibit similar rectifying behavior. The current work provides a feasible way to fabricate hybrid junctions based on asymmetric metal electrodes and investigate their electron transport toward the design of molecular rectifiers.

[SERS spectra of L-carnosine under the interaction of coordination with adsorbed SnCl2].

The authors have found that by virtue of utilizing the interaction of strongly chemically adsorbed SnCl2 with the analytes of organic/biologic molecules, the authors can not only effectively eliminate the laser carbonization and oxidation of probe molecules (e. g. pyridine), but also obtain specially enhanced Raman signals (e. g. vitamin B6). This method is applicable to the SERS spectroscopic analysis of highly reactive organic/biologic molecules. In the present paper, the authors report the investigation results on the electrochemical SERS spectra of L-carnosine (LCar) for the first time, mainly concentrating on the influence of adsorbed SnCl2 and applied potential on the SERS spectra of LCar. The SERS spectra of LCar were badly interfered by laser carbonization in the absence of SnCl2. However, in the presence of SnCl2 high quality SERS spectra of LCar could be obtained free of carbonization. It is demonstrated that LCar can be immobilized on the gold substrate indirectly via surface coordination with the pre-adsorbed SnCl2 under potential control. Apparently, such a sandwich-like adsorption configuration as Au-Sn(II)-LCar is beneficial both to sensing the strong electromagnetic field at the nanostructured gold surface and to preventing the LCar from damage by the laser.

Single-Molecule Sensing of Interfacial Acid-Base Chemistry.

Bronsted acid and base interactions are a cornerstone of chemistry describing a wide range of chemical phenomena. However, probing such interaction at the solid-liquid interface to extract the elementary and intrinsic information at a single-molecule level remains a big challenge. Herein, we employ an STM break junction (STM-BJ) technique to investigate the acid-base chemistry of carboxylic acid-based molecules at a Au (111) model surface and propose a prototype of a single-molecule pH sensor for the first time. The single-molecule measurements in different environmental conditions verify that the formation probability of molecular junctions is determined by the populations of deprotonated -COO- form in a self-assembled monolayer. Furthermore, the variation of the intensity of the conductance peaks (i.e., junction-forming probability) with the pH of the bulk solution fits well to the Henderson-Hasselbalch type equation. From the equation, a good linear relation is found between the degree of dissociation of the immobilized -COOH group and the environmental pH, providing a feasible way to design chemicals and biosensors and a detector at the single-molecule scale.