Limited effect of anatomical insert geometry on in vitro laxity in balanced anatomic posterior cruciate ligament retaining total knee arthroplasty.

PURPOSE: The present study assessed the effect of insert articular surface geometry (anatomical versus conventional insert design) on anteroposterior (AP) translation and varus-valgus (VV) laxity in balanced posterior cruciate ligament (PCL) retaining total knee arthroplasty (TKA). Secondly, we evaluated if the AP translation and VV laxity in the reconstructed knee resembled the stability of the native knee. METHODS: Nine fresh-frozen full-leg cadaver specimens were used in this study. After testing the native knee, anatomical components of a PCL-retaining implant were implanted. The knee joints were subjected to anteriorly and posteriorly directed forces (at 20° and 90° flexion) and varus-valgus stresses (at 20°, 45° and 90° flexion) in both non-weightbearing and weightbearing situations in a knee kinematics simulator. Measurements were performed in the native knee, TKA with anatomical insert geometry (3° built-in varus, medial concave, lateral convex), and TKA with symmetrical insert geometry. RESULTS: In weightbearing conditions, anterior translations ranged between 2.6 and 3.9 mm at 20° flexion and were < 1 mm at 90° flexion. Posterior translation at 20° flexion was 2.7 mm for the native knee versus 4.0 mm (p = 0.047) and 7.0 mm (p = 0.02) for the symmetrical insert and the anatomical insert, respectively. Posterior translation at 90° flexion was < 1.1 mm and not significantly different between the native knee and insert types. In non-weightbearing conditions, the anterior translation at 20° flexion was 5.9 mm for the symmetrical and 4.6 mm for the anatomical insert (n.s.), compared with 3.0 mm for the native knee (p = 0.02). The anterior translation at 90° flexion was significantly higher for the reconstructed knees (anatomical insert 7.0 mm; symmetrical insert 9.2 mm), compared with 1.6 mm for the native knee (both p = 0.02). Varus-valgus laxity at different flexion angles was independent of insert geometry. A valgus force in weightbearing conditions led to significantly more medial laxity (1°-3° opening) in the native knee at 45° and 90° flexion compared with the reconstructed knee for all flexion angles. CONCLUSIONS: Insert geometry seems to have a limited effect with respect to AP translation and VV laxity, in the well-balanced PCL-retaining TKA with an anatomical femoral component. Secondly, AP translation and VV laxity in the reconstructed knee approximated the laxity of the native knee.

Patella position is not a determinant for anterior knee pain 10 years after balanced gap total knee arthroplasty.

PURPOSE: Incidence of anterior knee pain after total knee arthroplasty (TKA) is reported to be between 4 and 49 %. The incidence of AKP at long-term follow-up and possible determinants after cruciate cruciate-retaining TKA were investigated. METHODS: A 10-year follow-up of a cohort of 55 patients (63 TKAs), who received the balanSys™ cruciate-retaining total knee system (Mathys Ltd, Bettlach, Switzerland) between 1999 and 2002, was performed. Patients had undergone the balanced gap technique, with either a fixed bearing or an AP-glide bearing. Standardised diagnostic questions regarding AKP were collected and categorised into two groups: those with and without AKP. The lateral patellar tilt, patellar displacement measurement and modified Insall-Salvati ratio were used for patella position evaluation on skyline radiographs. The Knee Society Score (KSS), the Knee Osteoarthritis Outcome Score (KOOS) and Numerical Rating Scales (NRS) for pain and satisfaction were obtained at follow-up. RESULTS: Sixteen patients in the study population experienced AKP. Incidence of AKP (fixed bearing 13/44; AP-glide bearing baring 3/17) was not dependent on type of insert (n.s.). There were no statistical differences in patella position and tibiofemoral contact point between the AKP group and the no AKP group (n.s.). KSS, KOOS, NRS-pain and NRS-satisfaction were significantly lower for the patients with AKP (all p < 0.05). CONCLUSION: Twenty-six percentage of the patients experienced AKP 10 years after balanced gap TKA. Postoperative patella positioning was not found to be a determinant for anterior knee pain after TKA. However, patellar displacement does not seem completely favourable. Moreover, type of bearing was not found a determinant for AKP at long-term follow-up. LEVEL OF EVIDENCE: Lower quality prospective cohort study (<80 % follow-up, patients enrolled at different time points in disease), Level II.

Medial open wedge high tibial osteotomy: can delayed or nonunion be predicted?

BACKGROUND: The opening wedge approach to high tibial osteotomy (HTO) is perceived to have some advantages relative to the closing wedge approach but it may be associated with delayed and nonunions. Because nonunions evolve over months, it would be advantageous to be able to identify risk factors for and early predictors of nonunion after medial opening wedge HTO. QUESTIONS/PURPOSES: We sought to determine whether (1) preoperatively identifiable patient factors, including tobacco use, body mass index > 30 kg/m(2), and degree of correction, are associated with nonunion, and (2) a modified Radiographic Union Score for Tibial Fractures (RUST) score, taken at 6 weeks and 3 months, would be predictive for delayed or nonunion after medial opening wedge HTO. METHODS: The medical records and radiographs of 185 patients, 21 bilateral cases, treated with a medial open wedge HTO using the TomoFix(®) device were retrospectively evaluated. For all patients, demographic data regarding risk factors were collected from their records. Diagnosis for delayed or nonunion was already done earlier for standard medical care by the orthopaedic surgeon based on clinical and radiographic grounds. For the retrospective radiographic evaluation, a modified RUST score was used in which each tibial cortex is scored by one observer. Logistic regression analysis was used to identify preoperative and postoperative predictive factors for developing delayed or nonunion. In the series, a total of 19 patients (9.2%) developed clinically delayed/nonunion of whom 10 patients (4.9%) developed a nonunion. RESULTS: Smoking was identified as a risk factor for developing delayed/nonunion (19% for smokers versus 5.4% for nonsmokers; p = 0.005; odds ratio, 4.1; 95% confidence interval, 1.5-10.7). By contrast, body mass index, lateral cortical hinge fracture, age, infection, and degree of correction were not risk factors. Patients with delayed/nonunion had lower RUST scores at all time points when a radiograph was taken compared with the total study group. CONCLUSIONS: The RUST score at 6 weeks and 3 months after surgery and the use of tobacco were identified as predictive factors for development of delayed union and nonunion after open wedge HTO. Based on these results, we now actively try to stop patients from smoking and these data are helpful in doing that. The RUST score may be of use to identify which patients are at risk for developing a delayed union so that interventions may be offered earlier in the course of care. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Accuracy, inter- and intrarater reliability, and user-experience of high tibial osteotomy angle measurements for preoperative planning: manual planning PACS versus semi-automatic software programs.

PURPOSE: To compare the accuracy, inter- and intrarater reliability, and user-experience of manual and semi-automatic preoperative leg-alignment measurement planning software for high tibial osteotomy (HTO). METHODS: Thirty patients (31 lower limbs) who underwent a medial opening wedge HTO between 2017 and 2019 were retrospectively included. The mechanical lateral distal femur angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and planned correction angle were measured on preoperative long-leg full weight-bearing radiographs utilising PACS Jivex Review® v5.2 manual and TraumaCad® v2.4 semi-automatic planning software. Independent measurements were performed by four raters. Two raters repeated the measurements. Accuracy in the standard error of measurement (SEM), inter- and intrarater reliability, and user-experience were analysed. Additionally, measurements errors of more than 3° were remeasured and reanalysed. RESULTS: The SEMs of all measured varus malalignment angles and planned correction angle were within 0.8° of accuracy for both software programs. Measurements utilising the manual software demonstrated moderate interrater intraclass correlation coefficient (ICC)-values for the mLDFA and mMPTA, and an excellent interrater ICC-value for the correction angle (0.810, 0.779, and 0.981, respectively). Measurements utilising the semi-automatic software indicated excellent interrater ICC-values for the mLDFA, mMPTA, and correction angle (0.980, 0.909, and 0.989, respectively). The intrarater reliability varied substantially per angle, presenting excellent intrarater agreements by both raters (ICC >  0.900) for the correction angle in each software program as well as poor-to-excellent ICC-values for the mLDFA (0.282-0.951 and 0.316-0.926) and mMPTA (0.893-0.934 and 0.594-0.941) in both the manual planning and semi-automatic software. Regarding user-experience, semi-automatic software was preferred by two raters, while the other two raters had no distinctive preference. After remeasurement of five outliers, excellent interrater ICC-values were found for the mLDFA (0.913) and mMPTA (0.957). CONCLUSIONS: Semi-automatic software outperforms the manual software when user-experience and outliers are considered. However, both software programs provide similar performance after remeasurement of the human-related erroneous outliers. For clinical practice, both programs can be utilised for HTO planning. LEVEL OF EVIDENCE: Diagnostic study, Level III.

Anatomic double-bundle anterior cruciate ligament reconstruction restores patellofemoral contact areas and pressures more closely than nonanatomic single-bundle reconstruction.

PURPOSE: To investigate the effects of anterior cruciate ligament (ACL) deficiency and nonanatomic single-bundle (SB) and anatomic double-bundle (DB) ACL reconstruction on the contact characteristics of the patellofemoral (PF) joint. METHODS: By use of a materials testing system, 7 fresh-frozen human cadaveric knees were tested. The following states were tested: ACL-intact knee, nonanatomic SB ACL reconstruction, anatomic DB ACL reconstruction, and ACL-deficient knee. Hamstring autografts were used. PF contact pressures and areas were measured with pressure-sensitive film at 30°, 60°, and 90° of knee flexion with a constant 100-N load on the quadriceps tendon. RESULTS: The total contact area of ACL-deficient and nonanatomic SB ACL-reconstructed knees (123.8 ± 63.9 and 149.6 ± 79.3 mm(2), respectively) significantly decreased when compared with those of the intact knee (206.1 ± 83.6 mm(2)) at 30° of knee flexion. The lateral-facet peak pressure of ACL-deficient and nonanatomic SB ACL-reconstructed knees (1.12 ± 0.52 and 1.22 ± 0.54 MPa, respectively) significantly decreased when compared with those of the intact knee (0.68 ± 0.38 MPa) at 90° of knee flexion. Anatomic DB ACL reconstruction restored the contact pressures and areas to values similar to those of the intact knee (no significant difference). CONCLUSIONS: ACL deficiency resulted in a significant decrease in the total and medial PF contact areas and in an increase in the lateral PF contact pressure. Anatomic DB ACL reconstruction more closely restored normal PF contact area and pressure than did nonanatomic SB ACL reconstruction. CLINICAL RELEVANCE: Our findings suggest that the changes in the PF contact area and pressures in ACL deficiency and after nonanatomic SB ACL reconstruction may be one of the causes of PF osteoarthritis or other related PF problems found at long-term follow-up. Anatomic DB ACL reconstruction may reduce the incidence of PF problems by closely restoring the contact area and pressure.

Evaluation of the tunnel placement in the anatomical double-bundle ACL reconstruction: a cadaver study.

The objective of this study was to investigate the accurate AM and PL tunnel positions in an anatomical double-bundle ACL reconstruction using human cadaver knees with an intact ACL. Fifteen fresh-frozen non-paired adult human knees with a median age of 60 were used. AM and PL bundles were identified by the difference in tension patterns. First, the center of femoral PL and AM bundles were marked with a K-wire and cut from the femoral insertion site. Next, each bundle was divided at the tibial side, and the center of each AM and PL tibial insertion was again marked with a K-wire. Tunnel placement was evaluated using a C-arm radiographic device. For the femoral side assessment, Bernard and Hertel's technique was used. For the tibial side assessment, Staubli's technique was used. After radiographic evaluations, all tibias' soft tissues were removed with a 10% NaOH solution, and tunnel placements were evaluated. In the radiographic evaluation, the center of the femoral AM tunnel was placed at 15% in a shallow-deep direction and at 26% in a high-low direction. The center of the PL bundle was found at 32% in a shallow-deep direction and 52% in a high-low direction. On the tibial side, the center of the AM tunnel was placed at 31% from the anterior edge of the tibia, and the PL tunnel at 50%. The ACL tibial footprint was placed close to the center of the tibia and was oriented sagittally. AM and PL tunnels can be placed in the ACL insertions without any coalition. The native ACL insertion site has morphological variety in both the femoral and tibial sides. This study showed, anatomically and radiologically, the AM and PL tunnel positions in an anatomical ACL reconstruction. We believe that this study will contribute to an accurate tunnel placement during ACL reconstruction surgery and provide reference data for postoperative radiographic evaluation.