Volar locking and angular stability plate for treatment of comminuted scaphoid fractures: a case series of 44 cases.

BACKGROUND: The primary method employed worldwide for the treatment of scaphoid fractures is screw fixation. However, in unstable and comminuted fractures, percutaneous fixation could produce complications due to technical challenges, such as improper axis positioning, inaccurate screw length measurement, intra-articular screw penetration, and impingement. Alternative open approaches for the surgical management of scaphoid fractures have been proposed, and in recent years, a new specific volar locking plate for the treatment of scaphoid fractures has been developed. This study aims to present the outcomes of this technique applied to 44 patients with unstable and comminuted fractures of the scaphoid. AIMS: The purpose of the study is to verify the effectiveness of the volar plate in the treatment of comminuted scaphoid fractures and the necessity for plate removal when consolidation has occurred. METHODS: Between January 2021 and March 2023, a specific volar locking plate for the treatment of scaphoid fractures was used in 44 patients. A retrospective study was conducted involving all patients, consisting of continuous clinical and radiographic assessments, functional evaluations (using QuickDASH and MHQ), and patient satisfaction surveys. RESULTS: All patients achieved clinical and radiographic recovery. However, the plate can impinge with nearby structures and should be removed once the fracture is consolidated. After plate removal, further improvement in range of motion was observed. CONCLUSION: The plate and screws system is a viable and appropriate method of osteosynthesis in the treatment of unstable and comminuted recent fractures occurring in the middle third of the carpal scaphoid.

Treatment of comminuted radial head fractures with personalized radial head prosthesis produced with 3-dimensional printing technology.

BACKGROUND: The radial head is the forearm's pivot point for supination-pronation. Although radial head resection can be performed in comminuted radial head fractures, radial head prosthesis has gained popularity in order to prevent possible complications such as progressive valgus instability in the elbow and secondary ulnocarpal impaction that may develop due to proximal displacement of the radius. As for radial head prostheses, standard prosthetic designs do not provide the same results in everyone, and the alignment of the radial head and radial neck angle cannot be fully achieved. We believe that the radial head must be reconstructed with a complete anatomical implant. We designed and applied personalized prostheses to our patients, and in this study, we wished to share the 2-year results of these patients. METHODS: In this study, 23 patients who had comminuted radial head fractures had personalized radial head prostheses inserted. Preoperative variables such as type of injury, age, side, additional ligament injury, operation time, number of radial head parts, neck angle of individual prosthesis, stem length, and stem diameter were noted. The mean operating time was 26 ± 9 minutes. One month postoperatively, after physical therapy, elbow range of motion, loss of strength compared to the opposite joint, Mayo elbow scores, QuickDASH scores, and patient satisfaction were evaluated. Patients were evaluated 2 years postoperatively. RESULTS: QuickDASH and Mayo elbow scores were satisfactorily good (mean QuickDASH score: 9.091, mean Mayo score: 91.08). According to the results of the patient satisfaction questionnaire, 16 of the 23 patients reported excellent satisfaction, 5 patients good satisfaction, and 2 patients moderate satisfaction. None of the patients reported poor results. DISCUSSION: Since personalized radial head prosthesis consists of a single monoblock, its surgical application consists of a single step and has a short operating time. As the applications in the literature increase and more studies are conducted, this subject will be better understood. Our study demonstrated that these patients, whose anatomies were individually replicated, achieved good range of motion and patient satisfaction. In fact, none of the patients reported negative results. In comminuted radial head fractures, surgical implantation of personalized radial head prosthesis is a treatment modality with easy application, short operating time, and good functional results.

Novel classification system for periprosthetic distal femoral fractures: a consideration for comminution.

PURPOSE: Comminution is an aspect of periprosthetic distal femoral fractures (PDFFs) that can influence postoperative outcomes and treatment selection, but is not included in current classification systems. We propose a new classification system for PDFFs based on comminution and cortical reads. This study aims to prove its reliability and efficacy to predict fracture severity and guide treatment. METHODS: A retrospective chart review of patients treated with single or dual locking plates for PDFFs was performed. Two fellowship-trained orthopedic joint reconstruction specialists used available imaging to classify each PDFF as either type 1 (minimal or no comminution allowing for reconstruction of medial and lateral cortices), type 2 (comminution reasonably allowing for reconstruction of either medial or lateral cortex), and type 3 (extensive comminution not allowing reasonable reconstruction of medial or lateral cortex). Each PDFF was then analyzed for radiographic outcomes including lateral distal femoral angle (LDFA) and the posterior distal femoral angle (PDFA). RESULTS: Interobserver reliability assessed by Cohen's Kappa statistic was 0.707, and average intraobserver reliability was 0.843, showing substantial reliability. Type 3 PDFFs had greater varus deformity than type 1 (p = 0.0457) or 2 (0.0198). CONCLUSION: The proposed classification system accounts for comminution, demonstrates strong interobserver and intraobserver reliability, and can be used to guide treatment in regard to single versus dual plating. LEVEL OF EVIDENCE: Retrospective comparative study, Level IV.

Use of an Intramedullary Allogenic Fibular Strut Bone and Lateral Locking Plate for Distal Femoral Fracture with Supracondylar Comminution in Patients over 50 Years of Age.

Background and Objectives: Distal femoral fracture is a severe injury that makes surgery challenging, particularly comminuted fractures in the supracondylar region. This study aimed to evaluate the outcomes of distal femoral fracture treated with the application of an intramedullary fibular allogenic bone strut in open reduction and internal fixation (ORIF) with precontoured locking plates in patients over 50 years of age. Materials and Methods: The study retrospectively enrolled 202 patients over 50 years of age with traumatic comminuted distal femoral fracture (AO/OTA 33-A3, 33-C2 and 33-C3) treated with ORIF with a locking plate from January 2016 to December 2019. The two groups were divided into patients who received an intramedullary allogenic bone strut and those who did not. Patients were followed for at least 1 year, with their function scores and radiographic data recorded. Results: A total of 124 patients were recruited, comprising 60 men and 64 women with an average age of 62.4 ± 8.5 years. The 36 patients who had received an intramedullary allogenic fibular bone strut reported lower postoperative pain scores at 1 month and lower postoperative Knee Society Scores (KSS) at 3 months than the control group. The application of an intramedullary allogenic fibular bone strut appeared to be significantly correlated with better 3-month postoperative KSS. Conclusions: The ORIF of distal femoral comminuted fracture with an intramedullary allogenic fibular bone strut can reduce pain and improve knee function in the early stages of postoperative rehabilitation and may reduce the time to union in patients over 50 years of age.

A hybrid technique combining intramedullary pinning with extramedullary plate fixation in unstable and comminuted radial head fractures following on-table reconstruction.

BACKGROUND: Management of comminuted radial fractures remains controversial. Currently, the emergence of on-table reconstruction technique has made fixation in comminuted radial head fractures more viable. However, the present study reported an intro-operative unstable displacement from the reconstructed radial head to the neck during plate fixation, characterized by a poor radiocapitellar contact and incongruity between the radial head and neck. A hybrid technique combining with intramedullary pining was performed in our study to restore the normal alignment and maintain the stability of fixation. Therefore, the purpose of this article aimed to prove the feasibility of unstable comminuted radial head fractures treated with the extramedullary plate and intramedullary pinning fixation using titanium elastic nails. METHODS: The clinical, functional and radiographic outcomes of the groups were compared during follow-up. The radiographic examination was conducted to evaluate the status of bone union, heterotopic ossification and post-traumatic arthritis. The functional assessment was performed to evaluate clinical effects, which included measurements of range of motion (ROM) in the elbow, Visual Analog Scale (VAS) score, Elbow Self-Assessment score (ESAS), Mayo Elbow Performance score (MEPS), and Disabilities of the Arm, Shoulder, and Hand (DASH)Outcome Measure score. RESULTS: Thirteen patients with unstable fractures were participated with an average follow-up of (38.6 ± 4.5) months for the experimental group and (32.0 ± 6.3) months for the control group, respectively. The functional outcomes in the experimental group, including MEPS and DASH, were significantly superior to the control group. However, no significant difference was observed in the elbow ROM and VAS score between two groups. In the last follow-up, one patient with post-traumatic arthritis rated as grades 1 and two with heterotopic ossifications were observed in the experimental group. In the control group, degenerative changes were observed in three cases (grade 1 in two cases and grade 2 in one case) and heterotopic ossifications rated as grade I were found in two patients. CONCLUSION: Collectively, intramedullary pinning with extramedullary plate fixation is feasible in unstable comminuted radial head fractures, which can be considered as a remedial surgery for on-table reconstruction technique.

Does posterior configuration have similar strength as parallel configuration for treating comminuted distal humerus fractures? A cadaveric biomechanical study.

BACKGROUND: The posterior plating technique could be used as a clinical alternative to parallel plating for treating comminuted distal humerus fractures (DHFs) successfully with good clinical results. However, the biomechanical characteristics for posterior fixation are still unclear. The purpose of this study is to evaluate the biomechanical properties of the posterior fixation and to make comparisons between the parallel and the posterior fixation systems. MATERIALS AND METHODS: We performed a cadaveric biomechanical testing with two posterior plating systems (a posterior two plating and a single posterior pre-contoured Y plating system) and one parallel two plating system to treat AO/OTA type-C2.3 DHFs. Among three groups, we compared construct stiffness, failure strength, and intercondylar width changes after 5000-cycle fatigue loading and failure loads and failure modes after destructive tests in both the axial compression and (sagittal) posterior bending directions. The correlations between construct failure loads and bone marrow density (BMD) were also compared. RESULTS: In axial direction, there were no significant differences in the stiffness and failure load between the posterior and the parallel constructs. However, in sagittal direction, the two-plate groups (posterior two plating and parallel plating group) had significant higher stiffness and failure loads than the one-plate group (single posterior Y plating). There was no fixation failure after 5000-cyclic loading in both directions for all groups. Positive correlation was noted between BMD and failure loads on parallel fixation. CONCLUSIONS: We found that when using two plates for treating comminuted DHFs, there were no significant differences in terms of most biomechanical measurements between posterior and parallel fixation. However, the single pre-contoured posterior Y plate construct was biomechanically weaker in the sagittal plane than the parallel and the posterior two-plate constructs, although there was no fixation failure after the fatigue test for all groups regardless of the fixation methods. LEVEL OF EVIDENCE: Biomechanical study.

The Use of Bone Marrow-Derived Stem Cells in the Treatment of a Comminuted Tibiotarsal Fracture in a Juvenile Red-legged Seriema (Cariama cristata).

An adult red-legged seriema (Cariama cristata) presented with a comminuted fracture of the tibiotarsus and fibula. Surgery was performed, and a type II external fixator, with 2 distal and 2 proximal pins, was used to stabilize the fracture. After a 10-day stabilization period, the bird developed a second fracture on the same bone, proximal to the first fracture site. Another surgery was performed on the seriema similar to the first one. However, in this second surgical procedure a single pin, instead of 2 perpendicular pins, was placed proximally to the fracture site. After the second surgical procedure, bone marrow stem cells (BMSCs) from the seriema's left ulna were collected. Twenty-seven days after the second surgery, the BMSCs were transplanted, into the fracture sites. Twenty-four days after the stem cells were injected into the fractures (51 days after the second surgical procedure), radiographic images revealed healing bone calluses at the fracture sites. The fracture healing was relatively long for this case (a total of 75 days). The addition of bone marrow stem cell therapy to the use of external fixation may have contributed to the healing observed radiographically 24 days after administration; therefore, bone marrow stem cell therapy, in addition to traditional surgical fracture reduction and stabilization, may be a promising therapeutic approach for avian cases with similar injuries and bone anatomy. However, as this is a single case, this therapeutic modality deserves further application and study. Moreover, we suggest modifications in the bone marrow stem cell collection and therapy, which may be useful for future studies and application involving birds.

The application of intraoperative ankle dislocation approach in the treatment of the unstable trimalleolar fractures involving posterior ankle comminuted fracture: a retrospective cohort study.

BACKGROUND: The aim of this study was to introduce a novel intraoperative lateral ankle dislocation approach during surgical treatment for patients with unstable trimalleolar fractures involving posterior ankle comminuted fractures and compare its effects and safety with those with conventional approach. METHODS: From June 2006 to June 2014, 69 patients diagnosed as unstable trimalleolar fractures involving posterior ankle comminuted fracture were included in this study. The patients were divided into intraoperative dislocating ankle group (experimental group) and conventional treatment group (control group) according to surgical modalities. The following parameters including rate of primary healing, healing time, incidence of talus necrosis, incidence of post-traumatic arthritis, functional outcomes according to Baird-Jackson classification system, and any possible complications in two groups were recorded and compared. RESULTS: There were no significant differences regarding the rate of primary healing, healing time and the rate of talus necrosis in two groups (P > 0.05). The incidence of post-traumatic arthritis in experimental and control group were 0 and 24.24% (P = 0.0006), respectively. The rate of excellent and good outcomes were achieved in 91.67% in experimental group and 72.73% in control group (P = 0.038), respectively. CONCLUSIONS: The findings suggest that the intraoperative ankle dislocation approach appears to be a promising surgical option for unstable trimalleolar fractures involving posterior ankle comminuted fracture because it can provide better functional outcomes and lower incidence of post-traumatic arthritis while not compromising primary healing and healing time.

Treatment of comminuted proximal humeral fractures using locking plate with strut allograft.

BACKGROUND: This study compared the radiologic outcome of fixation using locking plate only with fixation using locking plate with an endosteal strut allograft in the treatment of comminuted proximal humeral fracture. METHODS: Among 52 patients with comminuted proximal humeral fracture, 32 patients underwent fixation with locking plate only, and 20 patients underwent fixation using locking plate with an endosteal strut allograft. The strut allograft was inserted into the intramedullary cavity of the humerus to support the humeral head and fixed with the locking plate. Immediate postoperative radiologic findings were compared with those of 6 months or more after the surgery, and loss of anatomic fixation was defined if the varus malalignment of neck-shaft angle (NSA) was more than 5° or if the change of humeral head height (HHH) was more than 3 mm. RESULTS: In the locking plate-only group, 22 of 32 patients (69%) showed the change in NSA of more than 5°, with an average of 10.2°. The HHH change in 20 patients (62.5%) was more than 3 mm, with an average of 4 mm. Among 20 patients who underwent locking plate with the endosteal strut allograft, the average NSA and HHH change was 3° and 1 mm, respectively. Varus malalignment was evident in 2 patients (10%). The HHH change was more than 3 mm in 1 patient (5%). CONCLUSION: Fixation using a locking plate with an endosteal strut allograft can be considered a reasonable option to maintain the anatomic reduction in elderly patients with comminuted proximal humeral fracture.

Prospective study of the reproducibility of X-rays and CT scans for assessing trochanteric fracture comminution in the elderly: a series of 110 cases.

BACKGROUND: Trochanteric fractures are common but difficult to analyse in the elderly on plain X-rays. Fixation failures are related to the severity of the comminution, but comminution and the degree of instability are not easy to determine on standard X-rays. Use of computed tomography (CT) improves assessment of complex fractures, but this finding has not been confirmed versus intraoperative data. The primary objective of this prospective study was to determine the error rate when evaluating comminution on X-rays and CT scans. The secondary objectives were to determine whether CT data on comminution and stability were consistent with intraoperative findings and to define the fracture characteristics. HYPOTHESIS: Standard X-ray assessment underestimates the complexity of trochanteric fractures and is not very reproducible. METHODS: Between January and December 2013, all proximal femur fractures in the trochanter area of patients aged 75 years or older (mean age 85) were analysed prospectively with standard X-rays and computed tomography (CT). One hundred and ten patients (88 women and 22 men) with trochanteric fractures were included in the study. Fracture stability was evaluated using the Müller AO classification; the other fracture characteristics were evaluated independently. A senior surgeon evaluated the anonymised X-rays. A radiologist specialised in musculoskeletal imaging interpreted the CT scan images. All patients underwent total hip arthroplasty (110 patients) and 104 fixations of the greater trochanter. The X-ray and CT findings were compared to the intraoperative findings (gold standard) to evaluate their reproducibility. RESULTS: The reproducibility of the X-ray evaluation was poor for comminution, with a kappa of 0.4, sensitivity of 44 % and a negative predictive value of 29 % but a positive predictive value and specificity of 100 %. The CT evaluation had a kappa of 0.94, sensitivity of 95 % and negative predictive value of 79 %. According to the AO classification, unstable fractures were found in 65 patients based on X-rays, 80 patients based on CT scan and 83 patients based on intraoperative findings. Comminution was mainly identified during surgery; it was medial in 34 % of cases, posterior in 22 % and posteromedial in 21.8 %. DISCUSSION AND CONCLUSION: In the current study, 75.4 % of fractures were complex and unstable, with medial and/or posterior comminution present in three-quarters of these fractures. X-ray assessment underestimates posterior comminution and the complexity of the fracture line and was not very reproducible. The current results of this study suggest that comminution contributes to instability and that this finding is not taken into account in the AO classification, which is not well suited for this type of fracture and raises the question of how to best evaluate and treat these fractures. LEVEL OF EVIDENCE: Prospective diagnostic study, Level III.

Patellectomy, an old treatment in patellar fracture which is still alive: A case report.

INTRODUCTION: Comminuted patella fractures comprise 55 % of patellar fractures. In spite of advances in internal fixation of patella, patellectomy remains an effective treatment in comminuted fractures. In the shadow of different efficient methods of internal fixation, little attention is paid to patellectomy as an old treatment in patellar fracture which is a treatment option in circumstances like comminuted fractures and osteomyelitis. PRESENTATION OF CASE: A 54-year-old male presented with complaint of knee pain and limited range of motion. The patient experienced patella fracture four years ago and several sessions of surgery have been performed on his patella including tension band wiring, partial patellectomy, and arthroscopic release. Lastly, pain and severe limited range of motion, convinced us to perform total patellectomy. The result is satisfactory after one year; flexion is up to 90° and no limping or extension lag is observed. The only complaint is mild anterior knee pain. DISCUSSION: Patella has two important biomechanical functions including linking and displacement. Preserving even a single fragment of the patella substantially improves linking and displacement function of the patella. Total patellectomy is reserved for conditions like failed internal fixation, comminuted fractures, and patellar osteomyelitis. Although function of the knee cannot be thoroughly restored after removing of the patella, total patellectomy can lead to a relative satisfaction in performing activities of daily living. CONCLUSION: In spite of various types of treatment for patellar fracture, total patellectomy, is still an efficient treatment option in circumstances like comminuted fractures, failed internal fixation, and osteomyelitis.

Effects of Erythropoietin-Promoted Fracture Healing on Bone Turnover Markers in Cats.

In orthopaedics, erythropoietin (EPO) is applied in the preoperative management of anaemic patients, but also as a stimulating factor to assist bone regeneration due to its angiogenic and osteoinductive potential. Since orthopaedists mainly rely on their clinical experience to assess bone healing, additional and more objective methods such as studying the dynamics of bone markers are needed. Therefore, the aim of this study was to investigate the plasma activity of bone-specific alkaline phosphatase (BALP), the N-terminal propeptide of type I collagen (PINP), the C-terminal telopeptide of type I collagen (CTX), and deoxypyridinoline (DPD) during the first 2 months of healing of comminuted fractures in cats, either non-stimulated or locally stimulated with recombinant human erythropoietin (rhEPO). The study included twelve cats of mixed breeds, aged 7.2 ± 4 months, weighing 2.11 ± 1.1 kg, with comminuted diaphyseal fractures of the femur. Surgical treatment with plate osteosynthesis was performed in all animals. The cats were randomly divided into two groups-a control (n = 6) and an EPO group (n = 6). The locally applied EPO leads to the increased activity of bone formation markers (BALP and PINP) during the second week after the osteosynthesis, preceding the peaks in the control group by two weeks. The studied bone resorption markers (DPD, CTX) varied insignificantly during the studied period. In conclusion, erythropoietin could serve as a promoter of bone healing in comminuted fractures in cats.

Treatment of Complex Central Talar Fractures with Lateral Plate Combination with Medial Screw Fixation.

OBJECTIVE: The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures. METHODS: The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system. RESULTS: The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%). CONCLUSION: The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon's thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

The Effects and Risk Factors of Femoral Neck Shortening after Internal Fixation of Femoral Neck Fractures.

Backgroud: Internal fixation has been established as a treatment of choice in relatively young patients with femoral neck fractures. Due to the characteristics of femoral neck anatomy and blood supply, complications such as malunion, nonunion, avascular necrosis, and femoral neck shortening can occur after internal fixation of femoral neck fractures. Unlike other complications such as avascular necrosis or nonunion, femoral neck shortening has not been relatively well studied. This study aimed to investigate the risk factors and clinical outcomes of femoral neck shortening after internal fixation of femoral neck fractures. Methods: From June 2012 to July 2022, among 102 patients who underwent internal fixation of femoral neck fractures, 94 patients who met inclusion and exclusion criteria were retrospectively analyzed. Internal fixation of the femoral neck was done with cannulated compression screws or a femoral neck system. Patients were divided into 2 groups; femoral neck shortening (≥ 5 mm) and no shortening (< 5 mm) according to measurement on follow-up hip anteroposterior (AP) simple radiographs compared with postoperative hip AP simple radiographs. Demographic and radiographic data were compared between the 2 groups. The modified Harris Hip Score (mHHS) and a visual analog scale (VAS) were used to evaluate the clinical outcomes. Results: Among 94 patients, femoral neck shortening was observed in 33 (35.1%). In chi-square test, Pauwels angle, Garden type III or IV (displacement), and cortical comminution were significantly correlated with neck shortening (p < 0.05). In the multifactorial logistic regression test, cortical comminution was significantly correlated with femoral neck shortening (p < 0.01). The shortening group showed significantly lower clinical scores in terms of mHHS and VAS (p < 0.01). Conclusions: The femoral neck shortening group showed significantly lower clinical scores of mHHS and VAS than the no-shortening group. The presence of cortical comminution in preoperative hip computed tomography is a risk factor of femoral neck shortening after internal fixation of femoral neck fractures.

Avulsion Fracture of the Tibialis Anterior Tendon Associated with First Metatarsal Base Fracture: A Case Report and Literature Review.

We present a unique case of a 59-year-old shipyard worker who sustained an avulsion fracture of the tibialis anterior tendon, concurrently with a comminuted fracture at the base of the first metatarsal. This is the first reported case highlighting this concomitant presentation, which underlines the possibility of avulsion fractures accompanying comminuted fractures. Importantly, such avulsion fractures could lead to skin tenting and potential necrosis, necessitating early identification and prompt intervention. The patient underwent successful surgical intervention and displayed good functional restoration 15 months postoperatively.

Versatility of Titanium Mesh in Comminuted Maxillofacial Fractures. A Retrospective Study.

Background: Titanium mesh provides three-dimensional stability, it is easier and quick in placement, highly malleable and adaptable hence, proved to be worth in restoring the function and form in cases of comminuted maxillofacial fractures. Materials and Methods: A total of 12 patients were included in this retrospective study at Department of Oral and maxillofacial surgery, Sri Rajiv Gandhi College of Dental Science and Hospital, from December 2015 to June 2020. Out of 12 patients, 7 reported with frontal bone fracture and 5 reported with mandibular fracture. Patients were followed up for upto 18 months to evaluate efficacy of titanium mesh on postoperative long-term healing, aesthetic outcomes and return to normal function were evaluated. Results: The results have shown that titanium mesh has low complication rates and the ability to maintain occlusion and chewing postoperatively. Union occurred without complication in 90% of fractures, and patients treated for frontal bone fracture had excellent cosmetic results. Conclusion: The semi rigid nature of the titanium mesh fixation allows micro movement at the healing bone ends, reduces stress shielding effect which may improve functional bone healing. Bony continuity of the mandible can be restored providing three-dimensional morphology and stability. The versatile placement of screws is the principal advantage.

An automatic reduction method of 3D bone fragments based on a novel section contour point descriptor.

Comminuted fractures are orthopedic traumas with greater surgical difficulty. In clinical treatment, a great challenge is precise reduction of multiple broken bone fragments; Another great challenge is personalized and precise internal fixation after reduction. For these two issues, we designed an automated method framework for precise reduction and internal fixation of comminuted fractures. First, the Gaussian mixture model (GMM) is used to distinguish section points and noise points in a broken bone model; Second, ellipse fitting is carried out to achieve section points matching and a descriptor is proposed to describe the section features; Then, the Convolution Auto-Encoder (CAE) and genetic algorithm are used to extract feature vectors; Finally, after broken bone models registration, internal fixed plate can be reconstructed. Three verification experiments for comminuted bone fracture show this method has high accuracy and good efficiency. It can provide support for minimally invasive treatment for comminuted fractures.

Surgical Challenges and Outcomes in Treating a Floating Upper Arm With Multiple Humerus Fractures and Radial Neck Fractures.

Complex humerus fractures associated with high-energy trauma present significant surgical challenges due to their impact on limb functionality and structural integrity. This case report details the treatment of a floating upper arm injury, characterized by multiple humerus fractures and a radial neck fracture, in a 50-year-old male following a vehicular accident. The patient exhibited fractures at the proximal, mid-shaft, and distal segments of the humerus, necessitating an integrated surgical approach to effectively manage these injuries. Dual surgical approaches and perpendicular plating were employed to address the multifaceted nature of the fractures. The patient achieved satisfactory functional recovery, regaining a significant range of motion, which highlights the efficacy of the chosen surgical strategy. This case contributes to the existing literature by illustrating the benefits of specific surgical techniques in managing complex humerus fractures, emphasizing the necessity for meticulous planning and execution to optimize patient outcomes.

Cerclage Wiring Improves Biomechanical Stability in Distal Tibia Spiral Fractures Treated by Intramedullary Nailing.

BACKGROUND: Partial weight-bearing after operatively treated fractures has been the standard of care over the past decades. Recent studies report on better rehabilitation and faster return to daily life in case of immediate weight-bearing as tolerated. To allow early weight-bearing, osteosynthesis needs to provide sufficient mechanical stability. The purpose of this study was to investigate the stabilizing benefits of additive cerclage wiring in combination with intramedullary nailing of distal tibia fractures. METHODS: In 14 synthetic tibiae, a reproducible distal spiral fracture was treated by intramedullary nailing. In half of the samples, the fracture was further stabilized by additional cerclage wiring. Under clinically relevant partial and full weight-bearing loads the samples were biomechanically tested and axial construct stiffness as well as interfragmentary movements were assessed. Subsequently, a 5 mm fracture gap was created to simulate insufficient reduction, and tests were repeated. RESULTS: Intramedullary nails offer already high axial stability. Thus, axial construct stiffness cannot be significantly enhanced by an additive cerclage (2858 ± 958 N/mm NailOnly vs. 3727 ± 793 N/mm Nail + Cable; p = 0.089). Under full weight-bearing loads, additive cerclage wiring in well-reduced fractures significantly reduced shear (p = 0.002) and torsional movements (p = 0.013) and showed similar low movements as under partial weight-bearing (shear 0.3 mm, p = 0.073; torsion 1.1°, p = 0.085). In contrast, additional cerclage had no stabilizing effect in large fracture gaps. CONCLUSIONS: In well-reduced spiral fractures of the distal tibia, the construct stability of intramedullary nailing can be further increased by additional cerclage wiring. From a biomechanical point of view, augmentation of the primary implant reduced shear movement sufficiently to allow immediate weight-bearing as tolerated. Especially, elderly patients would benefit from early post-operative mobilization, which allows for accelerated rehabilitation and a faster return to daily activities.

Assessing the risks of children with preoperative comorbidities undergoing comminuted fracture surgery.

Introduction: Comminuted fractures are characterized by bones broken in at least two places, destabilizing the bone and requiring surgery. Children whose bones are still developing and maturing tend to have a higher risk of sustaining comminuted fractures as the result of trauma. Trauma is a major cause of death in children and constitutes a major issue in orthopedics because of the unique properties of children's bones compared to adult bones and the associated complications. Methods: This retrospective, cross-sectional study aimed to refine the association between comorbid disease and comminuted fractures in pediatric subjects using a large, national database. All data were extracted from the National Inpatient Sample (NIS) database from 2005 to 2018. Logistic regression analysis was used to evaluate associations between comorbidities and comminuted fracture surgery and between various comorbidities and LOS or unfavorable discharge. Results: A total of 2,356,483 patients diagnosed with comminuted fractures were selected initially, of whom 101,032 patients aged younger than 18 years who underwent surgery for comminuted fractures were included. Study results suggest that patients with any comorbidities undergoing orthopedic surgery for comminuted fracture appear to have longer LOS and a higher proportion of discharge to long-term care facilities. Discussion: Almost all comorbidities were significantly associated with poor in-hospital outcomes and longer LOS. The analysis of comminuted fractures in children may provide useful information to help first responders and medical personnel evaluate and manage comminuted fractures appropriately.