Dental age assessment in the living: a comparison of two common stage classifications for assessing radiographic visibility of the root canals in mandibular third molars.

After dentition is complete, degenerative tooth characteristics can be used for dental age assessment. Radiological assessment of the visibility of the root canals of the mandibular third molars in dental panoramic radiographs (DPRs) is known to be one such suitable feature. Essentially, two different stage classifications are available for evaluating the visibility of the root canals of mandibular third molars in the DPR. The aim of this study was to determine if one method outperforms the other. Therefore, the 2010 method of Olze et al. was directly compared to the 2017 method of Lucas et al. in the 2020 modification of Al Qattan et al. To this end, 233 DPRs from 116 females and 117 males aged 20.0 to 40.9 years were evaluated by three independent experienced examiners. In addition, one examiner ran two independent evaluations. Correlation between age and stage was investigated, and the inter- and intra-rater reliability was estimated for both methods. Correlation between age and stage was higher with the Olze method (Spearman rho 0.388 [95% CI 0.309, 0.462], males and 0.283 [95% CI 0.216, 0.357], females) than the Lucas method (0.212 [95% CI 0.141, 0.284], males and 0.265 [95% CI 0.193, 0.340], females). The intra-rater repeatability of the Olze method (Krippendorff's α = 0.576 [95% CI 0.508, 0.644], males and α = 0.592 [95% CI 0.523, 0.661], females) was greater than that for the Lucas method (intra-rater α = 0.422 [95% CI 0.382, 0.502], males and α = 0.516 [95% CI 0.523, 0.661], females). Inter-rater reproducibility was also greater for the Olze method (α = 0.542 [95% CI 0.463, 0.620], males and α = 0.533 [95% CI 0.451, 0.615], females) compared to the Lucas method (α = 0.374 [95% CI 0.304, 0.443], males and α = 0.432 [95% CI 0.359, 0.505], females). The method of Olze et al. was found to present marginal advantages to the Lucas et al. method across all examinations and may be a more appropriate method for application in future studies.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Factors associated with the outcome of root canal treatment-A cohort study conducted in a private practice.

AIM: To investigate the association of various pre-, intra- and post-operative factors on root canal treatment outcome. METHODOLOGY: In this cohort study, primary or secondary root canal treatment of mature permanent teeth was performed by a single endodontist in a private practice over 13 years, and followed 1-4 years after treatment. Treatment details and clinical and radiographic data were collected. The proportion of successfully treated teeth and roots based on strict radiographic (periapical index (PAI) ≤2) and clinical criteria (absence of pain, swelling or sinus tract) was estimated. To evaluate joint associations of prognostic factors and treatment success probability, 44 pre, intra- and post-operative factors were investigated using bivariate associations, and a multiple logistic regression model was fitted using Generalized Estimating Equations. RESULTS: 1259 teeth (2445 roots, 3149 canals) were assessed with a recall rate of 91%. The proportion of successfully treated teeth was 79.9% [95% confidence interval 77.7-82.1]. Eleven prognostic factors were identified that significantly reduced the odds ratio (OR) for treatment success at tooth level. Six were preoperative: injury history (OR = 0.05[0.01-0.24]), root PAI (OR = 0.29[0.20-0.42], 0.21[0.13-0.34] and 0.22[0.12-0.42] for PAI = 3, 4 and 5, respectively, against PAI = 1), lesion diameter (OR = 0.30[0.21-0.43] and 0.24[0.16-0.37] for diameters of 1-5 mm and ≥6 mm, respectively, against no lesion), tooth type (OR = 0.51[0.27-0.97] and OR = 0.45[0.24-0.83] for premolars and molars, respectively, against incisors or canines), tenderness to periapical palpation (OR = 0.64[0.43-0.94]) and two canals per root (OR = 0.67[0.54-0.83]). Four factors were intraoperative: root filling of unsatisfactory quality (OR = 0.18[0.08-0.40]) or extending beyond or shorter than 2 mm from the apex (OR = 0.44[0.26-0.75] and 0.62[0.40-0.97] respectively), resin sealer (OR = 0.58[0.39-0.87] against bioceramic sealer) and single visit treatment (OR = 0.40[0.21-0.75] against multiple visits). One factor was post-operative: defective coronal restoration (OR = 0.35[0.21-0.56]). CONCLUSION: The following factors were associated with unsuccessful root canal treatment: (i) history of injury, apical periodontitis with increased severity (larger lesion, higher PAI, tenderness to periapical palpation), or complicated anatomic conditions (premolar or molar, two canals in a single root); (ii) technically suboptimal root filling (of unsatisfactory quality or not ending within 2 mm of radiographic apex) performed in a single-visit, or use of resin sealer instead of novel bioceramic sealer; (iii) suboptimal quality coronal restoration.

The effect of root canal preparation tapers on planktonic bacteria and biofilm reduction in the apical third: A correlative microtomography and microbiological laboratory study.

AIM: To evaluate the influence of different preparation tapers on the reduction in planktonic bacteria and biofilms of Enterococcus faecalis and Candida albicans in the apical third (4 mm) of the mesial roots of mandibular molars, correlating decontamination with canal shape. METHODOLOGY: After microtomography analysis for morphological standardization of the canals, 48 mandibular molar roots, each containing two canals (96 canals), were contaminated with E. faecalis and C. albicans and divided into four groups (n = 11) for canal instrumentation using ProDesign Logic 2 files with different tapers G (.03): # 25.03; G (.04): # 25.04; G (.05): # 25.05; and G (.06): # 25.06 and irrigation with 2.5% sodium hypochlorite. Four roots were examined under a scanning electron microscope (SEM) to qualitatively assess biofilm formation. Eight roots were used as the negative control group (samples were not contaminated). Bacteriological samples were taken exclusively from the apical third of the roots before and after chemical-mechanical preparation and bacterial counts were determined (CFU/mL). The final micro-CT scan was used to quantify the volume variation and unprepared canal area in the apical third. Statistical analysis was performed using the Kruskal-Wallis, Student-Newman-Keuls and Wilcoxon tests for analysis of microbiological data. anova and the Tukey or Games-Howell test were used for analysis of micro-CT data and Spearman's test for correlations (α = 5%). RESULTS: All groups showed a significant reduction in bacteria (p < .05), with no statistically significant difference between groups. There was no significant difference in per cent volume increase between groups. The unprepared area (Δ%) was affected by the file used (p = .026) and was significantly lower for G (.06) compared to G (.03). There was no statistically significant correlation among bacterial reduction, volume and unprepared area (p > .05). CONCLUSION: The different preparation tapers influenced root canal shaping in the apical third but did not improve decontamination in this region.

Assessment of the quality of root canal fillings performed on extracted teeth by undergraduate dental students in a sample from Saudi Arabia.

BACKGROUND: The educational process in the field of endodontics commences with preclinical exercises to enhance students' proficiency in cleaning, shaping, and performing root canal fillings. Therefore, this study aimed to radiographically evaluate the technical quality of root canal fillings performed by preclinical students on extracted teeth at the College of Dentistry, University of Ha'il, Saudi Arabia. METHODS: A total of 788 extracted human teeth received root canal treatment by undergraduate students. The samples were then gathered and radiographically assessed using the three quality criteria of length, density, and taper. The category of root canal fillings was classified as either acceptable or unacceptable. The criteria for evaluating the acceptability of filling quality were defined based on the presence of adequate length, density, and taper. The effectiveness of root canal fillings was also evaluated in relation to the tooth type, sex, and treatment year. The agreement between the examiners was evaluated using Cohen's kappa test, and the relationship between the research variables was determined using the chi-squared test. The significance threshold was set at 0. 05. RESULTS: The overall quality of root filling was determined to be satisfactory in 532 (67.5%) of 788 endodontically treated extracted teeth. The majority of the research sample (88.1%) had enough length, 89.6% had adequate density, and 86.4% had acceptable taper. The quality of anterior teeth was substantially better than that of posterior teeth (p < 0.001). Our findings showed that the quality of root canals was better in 2022 than it had been in earlier years (p = 0.001). The three RCT quality criteria differed significantly when compared between sexes (p = 0.002). CONCLUSIONS: The quality of the root canal fillings completed by undergraduate students was rated as acceptable. The findings of the research suggest that the implementation of routine assessments to evaluate the technical competence of undergraduate dental students performing root canal treatments could provide significant insights into the efficacy of the curriculum requirements.

Microcomputed tomographic evaluation of 6 NiTi files on the pericervical dentin and the smallest dentin thickness zones in mesial root canals of mandibular molars: an in vitro study.

OBJECTIVE: The aim of this study was to evaluate six files on the pericervical dentin (PCD) and the smallest dentin thickness zones (SDTZ) in mesial root canals of mandibular molars. MATERIALS AND METHODS: Sixty mandibular molars with two mesial canals and Vertucci configuration were aleatory allocated in 6 experimental groups of 10 molars and 20 root canals. Specimens were scanned before instrumentation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WaveOne Gold (WG), group 2 with Reciproc Blue (RB), group 3 with TRUShape (TS), group 4 with XP-endo Shaper (XP), group 5 with iRace (IR), and group 6 with TruNatomy (TN). After instrumentation, the molars were scanned again and the images recorded were reconstructed with the NRecon v.1.7 (Bruker micro-CT) and analyzed with CTAn v.1.20.8 software (Bruker micro-CT) quantifying the changes produced in the surface, volume, structure thickness, SMI, and centroids at the Pericervical Dentin area of the root canals (PCD) located from the root canal orifices at the floor of the pulp chamber to 4 mm in the apical direction, and the changes in the Smallest Dentin Thickness Zones (SDTZ) located (from the furcation to 4 mm and 7 mm in the apical direction. The data obtained were compared using Wilcoxon and ANOVA with a 5% significance level. RESULTS: XP and TN were similar in all the parameters (P >.05) at the PCD, but TN showed significant differences from WG, RB, TS, and IR (P <.05), while XP showed significant differences from WG (P <.05) in volume, surface, and structure thickness. Regarding the changes in the SDTZ, the amount of dentin removed was similar between the groups in both canals at the middle 1/3, at the cervical 1/3 for MB canals, and in ML canals for RB, TS, XP, IR, and TN (P>.05). The action of WG was significantly different from that of XP and TN in the cervical 1/3 of the ML canal (P <.05). CONCLUSIONS: XP and TN rotatory files with small taper and volume maintained better with minor changes at the PCD and SDTZ, while WG reciprocation file produced the largest change. All the files were maintained centered at the PCD, and their performances were safe with a minimal thickness higher 0.5 mm at the SDTZ, and without risk of perforation. TRIAL REGISTRATION: No clinical trials were indicated in this study. CLINICAL RELEVANCE: The choice of endodontic files is a relevant factor in the conservative performance of root canal treatments.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Micro-computed tomographic analysis of the morphology of maxillary lateral incisors.

OBJECTIVE: This study aimed to investigate the morphology of maxillary lateral incisors (MxLI) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: The root canal configurations (RCC) of maxillary lateral incisors (MxLI) of a mixed Swiss-German population were examined using micro-CT, 3D imaging, and a 4-digit system code indicating the main root canal from coronal to apical thirds and the main foramina number. RESULTS: The most frequently observed RCC of MxLI were 1-1-1/1 (Vertucci I/Ve I, 80.0%), 1-1-2/2 (Ve V, 7.3%), 1-2-1/1 (Ve III, 6.4%), 2-1-1/1 (Ve II, 1.8%), and 1-1-1/2 (1.8%)(n = 110). Three additional RCC were observed less frequently (0.9%). The MxLI showed one physiological foramen in 89.1%, two in 9.1%, and seldom three (1.8%). Most accessory canals were identified in the apical third of a root (20.0%), and no accessory canals in 72.7% of the samples. CONCLUSIONS: Detailed information on the internal morphology of MxLI of a Swiss-German population is given. The most frequently observed RCC of MxLI is 1-1-1/1 (Ve I). However, accessory canals may occur in all apical thirds, and 20% of all teeth investigated showed a challenging RCC for clinical treatment. CLINICAL RELEVANCE: This study offers clinicians comprehensive data on MxLI morphology, emphasizing the significance of understanding varied RCC and accessory canal presence for improving root canal treatment outcomes. Over 25% of teeth exhibited complex RCC or accessory canals, influencing decisions during root canal treatment.

A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies. MATERIALS AND METHODS: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software. RESULTS: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%). CONCLUSIONS: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure. CLINICAL RELEVANCE: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

The effect of cone beam computerized tomography voxel size and the presence of root filling on the assessment of middle mesial canals in mandibular molar teeth.

INTRODUCTION: The study aims to compare the detection of the middle mesial canal (MMC) in mandibular molar teeth using cone beam computed tomography (CBCT) with different voxel sizes when the mesiobuccal (MB) and mesiolingual (ML) canals have three distinct phases (unpreparation, preparation and obturation and the removal of the obturation and repreparation). METHODS: Two hundred forty-two extracted human mandibular molars were collected and kept in a physiological saline solution prior to use. 0.2-, 0.28- and 0.35-mm voxel sizes CBCT (n = 242) were performed in three phases (Ph): Ph1, no MB and ML canal preparation or obturation; Ph2, after MB and ML canals preparation and obturation; and Ph3, after the removal of the obturation of MB and ML canals and canals repreparation. Images were analyzed using OnDemand3D® software. After the CBCT acquisition in Ph3, all the samples were clarified to visualize the presence of the MMC directly. A blinded, previously calibrated examiner analyzed all the images. RESULTS: The MMC was detected in 15 of the 242 teeth after the clearing technique. The lowest MMC detection rate was observed at 0.35-mm voxel size regardless of the ML and MB canal condition, while the highest was observed at 0.2-mm voxel size (P < 0.05). There is no statistically significant difference between 0.2-mm and 0.28-mm voxel sizes (P > 0.05). In all voxel sizes, the highest rate of detectability of the MMC was seen in Phase 1, while the lowest was in Phase 2. CONCLUSIONS: It may be appropriate to take a 0.20-mm voxel size CBCT image, especially after the removal of root canal filling. CLINICAL RELEVANCE: An appropriate CBCT voxel size and the absence of root canal filling in the root canal system help to detect the missing MMC.

Cone-beam computed tomography evaluation of shaping ability of kedo-S square and fanta AF™ baby rotary files compared to manual K-files in root canal preparation of primary anterior teeth.

BACKGROUND: Pediatric rotary file systems were developed to solve manual file limitations. With many systems available, it may be tricky to select the most appropriate one. AIM: to assess & compare Kedo-S Square, Fanta-AF™-Baby rotary files with manual K-file concerning removed dentin amount, canal transportation, centric ability & root canal taper using CBCT in primary anterior teeth. DESIGN: Extracted Seventy-five upper primary anterior teeth with intact 2/3 root length were collected and divided into three groups based on root canal instrumentation, group-I: prepared using K-file, group-II: prepared using Kedo-S Square, and group-III: prepared using Fanta AF™ Baby file. The teeth were imaged with CBCT before & following canal instrumentation. Then, the removed dentin amount was calculated at each root-canal level. The Kruskal-Wallis test was utilized to statistically analyze study data. RESULT: The difference among the three groups was highly statistically significant at cervical & apical thirds concerning dentin thickness changes on both mesial & distal sides following canal preparation with the least removed dentin in the Kedo-S Square group(P < 0.0001). Regarding transportation & centering ability, a non-significant difference between the three groups was found. 80% of the Fanta AF™ Baby group had good-tapered preparation compared to the Kedo-S Square (72%) and K-file (40%) groups(P < 0.05). CONCLUSION: Kedo-S Square was preferable to Fanta-AFTM-Baby & manual K-files in primary root canal preparation.

Second mesiobuccal canal segmentation with YOLOv5 architecture using cone beam computed tomography images.

The objective of this study is to use a deep-learning model based on CNN architecture to detect the second mesiobuccal (MB2) canals, which are seen as a variation in maxillary molars root canals. In the current study, 922 axial sections from 153 patients' cone beam computed tomography (CBCT) images were used. The segmentation method was employed to identify the MB2 canals in maxillary molars that had not previously had endodontic treatment. Labeled images were divided into training (80%), validation (10%) and testing (10%) groups. The artificial intelligence (AI) model was trained using the You Only Look Once v5 (YOLOv5x) architecture with 500 epochs and a learning rate of 0.01. Confusion matrix and receiver-operating characteristic (ROC) analysis were used in the statistical evaluation of the results. The sensitivity of the MB2 canal segmentation model was 0.92, the precision was 0.83, and the F1 score value was 0.87. The area under the curve (AUC) in the ROC graph of the model was 0.84. The mAP value at 0.5 inter-over union (IoU) was found as 0.88. The deep-learning algorithm used showed a high success in the detection of the MB2 canal. The success of the endodontic treatment can be increased and clinicians' time can be preserved using the newly created artificial intelligence-based models to identify variations in root canal anatomy before the treatment.

Can ultrasonography be used to determine working length in endodontic treatment? An in vitro study.

This study was conducted to evaluate efficacy of ultrasonography (USG) in determining working length in in-vitro conditions. Twenty five access cavities of maxillary incisor teeth were opened and actual working lengths (AWL) were measured with dental operating microscope. The working length were then measured with an electronic apex locator and USG. USG and apex locator measurements were statistically analyzed using one sample t-test and compared with AWL. The mean AWL measurment was 20.68 mm. USG measured the working length slightly longer (21.09 mm) than the measurements of apex locator (20.64 mm). Statistical analysis showed that the USG method provided similar measurements to electronic apex locators and with no statistical difference with actual working length (P < .05). USG emerges as a promising method for working length measurement that allows simultaneous visualization of root tip anatomy in cases where electronic apex locators may be insufficient and there is buccal cortical bone loss.

An automated method to analyze root filling voids and gaps using confocal microscopy images.

This study evaluated the feasibility of an automated method to delimit the required area to quantitatively analyze root filling voids and gaps from cross-sectional confocal laser scanning microscopy (CLSM) images. Root canals of maxillary canines were prepared with rotary instruments and filled by lateral compaction technique using gutta-percha and AH Plus sealer. The roots were stored (100% humidity, 37 °C) for a period of 24 h and then transversally sectioned to obtain 2-mm-thick slices from the apical and middle thirds. The areas corresponding to filling materials, gaps, and voids were manually delimited or automatically demarked by ImageJ software after converting the images to the RGB color system. Based on manual and automatic delimitations, the percentages of voids and gaps were calculated. Data of voids and gaps between middle and apical thirds were individually compared by paired t-test. Pearson`s correlation test was used to assess the correlation of data between the methods. Irrespective of the method of area delimitation, no difference was observed between the root thirds for both voids and gaps, while the p-values calculated for each method were similar. Almost perfect correlations between the methods were observed for both outcomes. The proposed method to automatically delimit the areas corresponding to filling material, voids, and gaps appears to be a valid method to facilitate the quantitative analysis of defects in root canal fillings using topographic CSLM images.

Characterization of the root and canal anatomy of maxillary premolar teeth in an Iraqi subpopulation: a cone beam computed tomography study.

This study aims to evaluate the number of roots and root canal morphology types of maxillary premolars in relation to a patient's gender and age in an Iraqi population using two classification systems. Cone beam computed tomography (CBCT) scans of 1116 maxillary premolars from 385 patients were evaluated for the number of roots and root canal morphology types according to Vertucci's classification and Ahmed et al. classification systems. Differences in the number of roots and root canal morphology types with regard to tooth type, patients' gender and age groups were evaluated and the degree of bilateral symmetry was determined. Chi-squared test was used for statistical analysis. About 51.1% of the 1st premolars were double rooted. The majority (87.9%) of the 2nd premolars were single rooted. The three-rooted form presented in only 1.2% and 0.7% of the 1st and 2nd premolars, respectively. Vertucci Type IV (Ahmed et al. code 2MaxP B1P1) and Vertucci Type I (Ahmed et al. code 1MaxP1) were the most common canal morphology types in the 1st and 2nd premolars, respectively. Females showed a lower number of roots and a higher prevalence of Vertucci Type I configuration (P < 0.05). Younger age groups showed a higher prevalence of Vertucci Type I configuration (P < 0.05). Bilateral symmetry was seen in more than half of the maxillary premolars. There is a considerable variation in the number of roots and root canal configurations of maxillary premolars in the studied Iraqi population, with a significant difference by gender and age groups. Ahmed et al. classification provided more accurate presentation of the root and canal anatomy in maxillary premolars compared to Vertucci's classification.

A microcomputed tomography analysis of adaptation in premolars with flared root canals restored with different digitally custom fabricated post materials.

STATEMENT OF PROBLEM: Preserving and strengthening the remaining tooth structure of compromised flared root canals after endodontic treatment is challenging. PURPOSE: The purpose of this in vitro study was to compare the adaptation of milled polymer- infiltrated ceramic, fiber-reinforced composite resin, and high-performance semicrystalline thermoplastic resin posts as used to restore mandibular premolars with flared root canals. MATERIAL AND METHODS: Forty sound mandibular premolars were randomly divided into 4 groups: custom Vita Enamic (CV), custom fiber-reinforced composite resin (CF), custom polyetherketoneketone (CP), and prefabricated fiber (RF) posts. After endodontic treatment, each tooth was sectioned 1.5 mm occlusal to the cementoenamel junction. Then, the post space was prepared and flared, except the RF group, to a depth of 9 mm. The post space in RF group was prepared with a post drill. For the CV, CF, and CP groups, the posts were milled, finished, and cemented to their corresponding teeth. Each tooth was scanned using a microcomputed tomography device, and the reconstructed images were analyzed in mesiodistal, buccolingual, and horizontal planes. The cement thickness, cement volume, and volume of voids were measured. The data were analyzed using 3-way ANOVA (cement thickness) and 2-way ANOVA (cement volume and voids volume) tests followed by the post hoc Tukey test (α=.05). RESULTS: The 3-way ANOVA test revealed a significant interaction (P<.001) between material type, section, and surface on the cement thickness. The mean cement thickness in the RF group was significantly higher than in the CV group (P=.001) and CF group (P=.005). The least mean cement thickness was at the apical section followed by the cervical and middle sections. Regarding cement volume, the 2-way ANOVA test showed statistically significant interaction between material type and section. The mean cement volume in the RF group was significantly lower than in the CV group (P=.001), CF group (P=.001), and CP group (P=.001). The highest mean cement volume was in the cervical section followed by the middle and apical sections. The 2-way ANOVA test showed statistically significant interaction (P<.001) between material type and section on the volume of voids. Significant differences were found between the mean volume of voids at the cervical and middle sections (P=.001) and the cervical and apical sections (P=.002). CONCLUSIONS: Compared with prefabricated fiber posts, digitally fabricated polymer-infiltrated ceramic and fiber-reinforced composite resin posts had a thinner cement layer with minimal thickness at the apical section. The digitally fabricated posts had higher cement volume, especially at the cervical section, than prefabricated fiber posts. High volumes of voids were related to the cervical section of all tested posts.

Age estimation by pulp canal/root ratio in Yorkshire terrier dogs.

Background: The study of the morphological parameters of teeth on dental radiographic images, especially evaluation of the pulp canal/root ratio (PCRR), has been presented as a reliable method to estimate age both in humans and animals. Evaluating PCRR involves a simple, nondestructive procedure that can be used both in living individuals and in cadavers. There is a scarcity of studies assessing the relationship between PCRR and age in dogs (Canis lupus familiaris). Objective: The aim of this study was to evaluate the relationship between PCRR and age in Yorkshire terrier dogs. Animals and procedures: Dental radiographs of 53 Yorkshire terrier dogs from the database of the Odontovet Veterinary Dentistry Center (Brazil) were analyzed. Using ImageJ software, 3 consecutive measurements of the widths of 2 roots (mesial and distal) and their respective pulp canals were taken at both mandibular molar teeth (left, 309 and right, 409). The PCRR was then calculated using width means. Results: The PCRR decreased with increasing age in both mesial (0.21 ± 0.09 in animals aged < 24 mo, 0.12 ± 0.04 in animals aged between 25 and 96 mo, and 0.09 ± 0.03 in dogs aged > 96 mo) and distal (0.24 ± 0.11, 1.01 ± 0.03, and 0.09 ± 0.03, by the same order) roots. A statistically significant, moderate negative correlation was demonstrated between age and PCRR of the mesial [rs (97) = -0.545; P < 0.001] and distal [rs (98) = -0.578; P < 0.001] roots. Conclusion and clinical relevance: This work contributes to the knowledge of PCRR in dogs and its relationship with age, paving the way for further studies using larger samples in different canine breeds.

Estimation de l'âge par le rapport canal pulpaire/racine chez des chiens de race Yorkshire. Contexte: L'examen des paramètres morphologiques des dents sur des radiographies dentaires, particulièrement l'évaluation du rapport canal pulpaire/racine (PCRR), a été présenté comme une méthode fiable d'estimer l'âge chez les humains et les animaux. L'évaluation du PCRR est faite au moyen d'une procédure simple et non-destructive qui peut être utilisée autant chez les individus vivants que sur des cadavres. Il y a peu d'études évaluant la relation entre le PCRR et l'âge chez les chiens (Canis lupus familiaris). Objectif: L'objectif de la présente étude était d'évaluer la relation entre le PCRR et l'âge chez des chiens de race Yorkshire. Animaux et procédures: Les radiographies dentaires de 53 chiens de race Yorkshire provenant de la base de données du Centre de dentisterie vétérinaire Odontovet (Brésil) ont été analysées. À l'aide du logiciel ImageJ, 3 mesures consécutives de la largeur de 2 racines (mésiale et distale) et de leur canal pulpaire respectif ont été prises au niveau des dents molaires mandibulaires (gauche, 309 et droite, 409). Le PCRR a par la suite été calculé utilisant les moyennes des largeurs. Résultats: Le PCRR diminuait avec une augmentation de l'âge autant pour la racine mésiale (0,21 ± 0,09 chez les animaux âgés de < 24 mo, 0,12 ± 0,04 chez les animaux âgés entre 25 et 96 mo, et 0,09 ± 0,03 chez les chiens de > 96 mo) que pour la racine distale (0,24 ± 0,11, 1,01 ± 0,03, 0,09 ± 0,03, dans le même ordre d'âge). Une différence statistiquement significative, corrélation modérément négative a été mise en évidence entre l'âge et le PCRR pour la racine mésiale [rs (97) = −0,545; P < 0,001] et la racine distale [rs (98) = −0,578; P < 0,001]. Conclusion et pertinence clinique: Cette étude contribue à la connaissance du PCRR chez les chiens et sa relation avec l'âge, ouvrant la voie à des études ultérieures avec un échantillonnage plus grand et différentes races de chien.(Traduit par Dr Serge Messier).

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Micro-computed tomography analysis of calcium hydroxide delivery efficacy in C-shaped canal system of mandibular second molars.

BACKGROUND: Calcium hydroxide [Ca(OH)2] is widely accepted as a biocompatible interappointment intracanal medicament. This study aimed to analyze the efficacy of Ca(OH)2 placement into the C-shaped canal system of mandibular second molars using the syringe method with and without lentulo spiral utilizing micro-computed tomography (micro-CT). METHODS: Twenty-four extracted mandibular second molars were instrumented and classified into C-shaped floors (n = 12) and non-C-shaped floors (n = 12). Both groups were placed with Ca(OH)2 using the syringe system, then all teeth were scanned and cleaned, and placed with Ca(OH)2 again but with the syringe system followed by lentulo spiral and rescanned. The specimens were scanned using micro-CT to analyze the volume, volume percentage, uncontacted surface area, and uncontacted surface area percentage of Ca(OH)2 with the two delivery methods in the entire canal and at the apical 4 mm of the canal. Mann-Whitney test and Wilcoxon signed-rank test were used to determine the statistical differences among the groups. RESULTS: Syringe administration used in conjunction with lentulo spiral presented lower uncontacted surface area, a lower percentage of uncontacted surface area, larger volume, and a higher percentage of volume than syringe without lentulo spiral (P < 0.05). There was no significant difference between the C-shaped floor group and the non-C-shaped floor group (P > 0.05) in the Ca(OH)2 uncontacted surface area, volume, and percentages at different regions of canals and among different delivery techniques groups. CONCLUSIONS: The lentulo spiral and syringe technique combination can increase the volume and contacted surface area of Ca(OH)2 in the C-shaped canal system of mandibular second molars.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.