Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII (bpy)33+ Oxidant.

The cobalt substituted polyoxotungstate [Co6 (H2 O)2 (α-B-PW9 O34 )2 (PW6 O26 )]17- (Co6) displays fast electron transfer (ET) kinetics to photogenerated RuIII (bpy)33+ , 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II)-OH2 and Co6(II)-OH, respectively, whose speciation in aqueous solution is associated to a pKa of 7.6), and generates a Co(III)-OH moiety (Co6(III)-OH), as proven by transient absorption spectroscopy; (ii) at pH>pKa , the Co6(II)-OH→RuIII (bpy)33+ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH

Synthesis, characterization and biological evaluation of octyltrimethylammonium tetrathiotungstate.

Octyltrimethylammonium tetrathiotungstate salt (ATT-C8) was synthesized and its ability to chelate copper was evaluated. The biological and toxic aspects were evaluated by in vitro and in vivo assays, using bovine aorta endothelial cells (BAEC) and zebrafish (Danio rerio) embryos. The obtained results suggest that ATT-C8 has better biocompatibility, showing a significantly lower lethal concentration 50 (LC50) value in comparison to ammonium tetrathiotungstate (ATT). Zebrafish embryos assay results indicate that both tetrathiotungstate salts at the studied concentrations increase the hatching time. Even more, an in vivo assay showed that synthesized materials behave as copper antagonists and have the ability to inhibit its toxicological effects. Also, both materials were found to be active for the in vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. The characterization of the materials was carried out using the following spectroscopic techniques: Ultraviolet-Visible (UV-Vis), Fourier Transform Infrared (FTIR) and proton nuclear magnetic resonance (1H-NRM).

Metal (Mo, W, Ti) Carbide Catalysts: Synthesis and Application as Alternative Catalysts for Dry Reforming of Hydrocarbons-A Review.

Dry reforming of hydrocarbons (DRH) is a pro-environmental method for syngas production. It owes its pro-environmental character to the use of carbon dioxide, which is one of the main greenhouse gases. Currently used nickel catalysts on oxide supports suffer from rapid deactivation due to sintering of active metal particles or the deposition of carbon deposits blocking the flow of gases through the reaction tube. In this view, new alternative catalysts are highly sought after. Transition metal carbides (TMCs) can potentially replace traditional nickel catalysts due to their stability and activity in DR processes. The catalytic activity of carbides results from the synthesis-dependent structural properties of carbides. In this respect, this review presents the most important methods of titanium, molybdenum, and tungsten carbide synthesis and the influence of their properties on activity in catalyzing the reaction of methane with carbon dioxide.

Synthesis, Characterization, Electrochemistry, Photoluminescence and Magnetic Properties of a Dinuclear Erbium(III)-Containing Monolacunary Dawson-Type Tungstophosphate: [{Er(H2O)(CH3COO)(P2W17O61)}2]16.

Reaction of the trilacunary Wells-Dawson anion {α-P2W15O56}12- with ErIII ion in a 1 M LiOAc/HOAc buffer (pH 4.8) solution produces a dinuclear erbium(III) substituted sandwich-type structure [{Er(H2O)(CH3COO)(P2W17O61)}2]16- (1). The isolated compound was structurally characterized using single crystal and powder X-ray diffraction, FTIR spectroscopy, mass spectrometry and thermogravimetric analysis. The electrochemical, electrocatalytic, photoluminescence and magnetic properties of 1 were investigated.

Unraveling the Self-Assembly of Heterocluster Janus Dumbbells into Hybrid Cubosomes with Internal Double-Diamond Structure.

Cubosomes are bicontinuous cubic-phase particles generated by amphiphile self-assembly with bicontinuous cubic phases, which creates an intricate network of interconnected nanochannels that endow these materials with special functions for advanced applications. On the other hand, clusters are an attractive class of molecules that exhibit intriguing functions and properties that differ from those of atoms and nanoparticles. Inspired by lipid self-assembly and attracted to the new functionalities of clusters, we prepared special heterocluster Janus dumbbells (HCJDs) composed of dissimilar nanoclusters: namely, a polyoxometalate and a polyhedral oligomeric silsesquioxane. HCJDs resemble conventional amphiphiles and, as such, they self-assemble in solution into faceted hybrid cubosomes via the transformation of vesicles into spongelike aggregates. Multiple mechanisms that lead to equilibrium, including molecular self-assembly, vesicle accumulation, membrane fusion, inner-structure reorganization, and cubic crystal growth, contributed to the overall process. On the basis of these results, we proposed a strategy for self-assembly-from basic molecular design that goes beyond traditional amphiphiles to the construction of micro- or nanomaterials with hierarchical structures and advanced functions.

Cobalt- and Nickel-Containing Germanotungstates Based on Open Wells-Dawson Structure: Synthesis and Characterization of Tetrameric Anion.

Two transition-metal-substituted compounds K10H10{[Co(H2O)2]2[Co(H2O)3]2(Ge4W36O130)}·32H2O (1Co) and K10H10{[Ni(H2O)2]2[Ni(H2O)3]2(Ge4W36O130)}·32H2O (2Ni), have been successfully synthesized, both of which consist of the S-shaped tetrameric structure {Ge4W36} constructed from trivacant Keggin-type germanotungstate precursor K8Na2[ A-α-GeW9O34]·25H2O. These compounds were characterized by single crystal X-ray diffraction crystallography, X-ray powder diffraction (XRD), Raman spectra, thermogravimetric analysis (TGA), electrochemistry, and IR spectra. In addition, the UV spectra and the electrospray-ionization mass spectra (ESI-MS) were employed to investigated the stable pH value range of 1Co and 2Ni in aqueous solution.

A novel method to construct a 3D FeWO4 microsphere-array electrode as a non-enzymatic glucose sensor.

As the special sensor for glucose detection, a non-noble-metal nanoarray architecture is extremely attractive due to its easy accessibility to target molecules and more exposed surface area. In this communication, we report the first synthesis of FeWO4 microsphere-array on the three-dimensional (3D) Ni foam (FeWO4 microspheres/NF) as the mimetic electrode for efficient catalytic oxidation of glucose in an alkaline medium. When used as an artificial analog glucose sensor, the result of the present sensing system can also be calculated with a sensitivity of 2810 µA mM cm-2, a linear range from 0.04 mM to 2 mM and a detection limit up to 1.4 µM (S/N = 3). This glucose sensor with satisfactory stability and reproducibility can also be applied to the detection of glucose in human serum. As a promising sensing platform, this proposed 3D FeWO4 microspheres/NF may open a new strategy for pursuing electrochemical detection of biomolecules.

Towards Covalent Photosensitizer-Polyoxometalate Dyads-Bipyridyl-Functionalized Polyoxometalates and Their Transition Metal Complexes.

A triol-functionalized 2,2'-bipyridine (bpy) derivative has been synthesized and used for the tris-alkoxylation of polyoxometalate (POM) precursors. The resultant POM-bpy conjugates of the Wells-Dawson- and Anderson-type feature a C-C bond as a linkage between the POM and bpy fragments. This structural motif is expected to increase the hydrolytic stability of the compounds. This is of particular relevance with respect to the application of POM-bpy metal complexes, as photocatalysts, in the hydrogen-evolution reaction (HER) in an aqueous environment. Accordingly, Rh(III) and Ir(III) complexes of the POM-bpy ligands have been prepared and characterized. These catalyst-photosensitizer dyads have been analyzed with respect to their electrochemical and photophysical properties. Cyclic and square-wave voltammetry, as well as UV/vis absorption and emission spectroscopy, indicated a negligible electronic interaction of the POM and metal-complex subunits in the ground state. However, emission-quenching experiments suggested an efficient intramolecular electron-transfer process from the photo-excited metal centers to the POM units to account for the non-emissive nature of the dyads (thus, suggesting a strong interaction of the subunits in the excited state). In-depth photophysical investigations, as well as a functional characterization, i.e., the applicability in the HER reaction, are currently ongoing.

Substitution Effect on the Charge Transfer Processes in Organo-Imido Lindqvist-Polyoxomolybdate.

Two new aromatic organo-imido polyoxometalates with an electron donor triazole group ([n-Bu4N]2[Mo6O18NC6H4N3C2H2]) (1) and a highly conjugated fluorene ([n-Bu4N]2[Mo6O18NC13H9]) (2) have been obtained. The electrochemical and spectroscopic properties of several organo-imido systems were studied. These properties were analysed by the theoretical study of the redox potentials and by means of the excitation analysis, in order to understand the effect on the substitution of the organo-imido fragment and the effect of the interaction to a metal centre. Our results show a bathochromic shift related to the charge transfer processes induced by the increase of the conjugated character of the organic fragment. The cathodic shift obtained from the electrochemical studies reflects that the electronic communication and conjugation between the organic and inorganic fragments is the main reason of this phenomenon.

Supramolecular Copolymerization of Short Peptides and Polyoxometalates: toward the Fabrication of Underwater Adhesives.

Peptide assembly has reached exquisite levels of efficiency in the creation of bioactive materials. However, we have not yet been able to take what we have learned from peptide assembly to develop a general strategy for the fabrication of biomimetic underwater adhesives, which retain significant advantages as medical glue for clinical treatment. Herein we report a simple approach to prepare peptide-based adhesives through the supramolecular polymerization of cationic peptides drove by polyoxometalates (PMs). Mass spectra, Fourier-transform infrared spectra and 183W NMR spectra confirmed the structural integrity of peptides and PMs during the coassembly process. Scanning electron microscopy demonstrated that the multivalent interactions between peptides and polyoxometaltes led to the formation of robust 3D network structures. The rheological study revealed that the peptide/PM assemblies exhibited mechanically rigid gel-like behavior and self-healing property. Interestingly, the assemblies showed the capacity to adhere various wet solid materials under waterline. The shear strength of the peptide-based adhesives are stronger than that of the commercially available fibrin glue. This finding is exciting and serves to expand our capability of the fabrication of peptide-based materials.

Synthesis and evaluation of pyridinium polyoxometalates as anti-HIV-1 agents.

The unique properties of polyoxometalates, such as molecular polarity, redox potential, surface charge distribution, shape and acidity, influence their response of recognition to targeted biological macromolecules. By using PM-19 (K7PTi2W10O40) as a lead-compound, a series of novel pyridinium polyoxometalates (A7PTi2W10O40), which hadn't been reported in literatures, were designed and synthesized. The evaluation was conducted using the single-cycle pseudovirus infection assay (TZM-bl assay), CCK-8 method was used for determining the cytotoxicity. The results indicated that the designed pyridinium polyoxometalates had a lower toxicity to TZM-bl cells, and showed higher inhibitory activity against HIV-1 virus.

Wet and Functional Adhesives from One-Step Aqueous Self-Assembly of Natural Amino Acids and Polyoxometalates.

Sessile organisms have undergone long-term evolution to develop the unique ability by positioning themselves on wet solid surface through secreting adhesive proteins. The present study reveals that natural amino acid monomers can also exhibit similar adhesion capacity. This kind of biomimetic adhesives were created by the one-step aqueous assembly of basic amino acids with assistance of anionic polyoxometalates. The polyoxometalates not only serve as multivalent scaffold to initiate the supramolecular cross-linking of amino acid molecules, but also function as a redox component, bestowing the wet adhesives with electrochromic features.

Differentiation of stem cells into insulin-producing cells under the influence of nanostructural polyoxometalates.

Two polyoxometalates (POMs) with W were synthesized by a two-step, self-assembling method. They were used for stimulation of mesenchymal stem cell differentiation into insulin-producing cells. The nanocompounds (tris(vanadyl)-substituted tungsto-antimonate(III) anions [POM1] and tris-butyltin-21-tungsto-9-antimonate(III) anions [POM2]) were characterized by analytical techniques, including ultraviolet-visible, Fourier transform infrared, nuclear magnetic resonance spectroscopy, and transmission electron microscopy. We found that these polyoxotungstates, with 2-4 nm diameters, did not present toxic effects at the tested concentrations. In vitro, POM1 stimulated differentiation of a greater number of dithizone-positive cells (also organized in clusters) than the second nanocompound (POM2). Based on our in vitro studies, we have concluded that both the POMs tested had significant biological activity acting as active stimuli for differentiation of stem cells into insulin-producing cells.

Degradation of Amaranth azo dye in water by heterogeneous photo-Fenton process using FeWO4 catalyst prepared by microwave irradiation.

FeWO4 particles were synthesized by a simple, rapid and facile microwave technique and their catalytic properties in heterogeneous photo-Fenton reaction were evaluated. This material was employed in the degradation of Amaranth azo dye. Individual and interactive effects of operational parameters such as pH, dye concentration and H2O2 dosage on the decolorization efficiency of Amaranth dye were evaluated by 2(3) central composite design. According to characterization techniques, a porous material and a well-crystallized phase of FeWO4 oxide were obtained. Regarding the photo-Fenton reaction assays, up to 97% color and 58% organic carbon removal were achieved in the best experimental conditions. In addition, the photo-Fenton process maintained treatment efficiency over five catalyst reuse cycles to indicate the durability of the FeWO4 catalyst. In summary, the results reveal that the synthesized FeWO4 material is a promising catalyst for wastewater treatment by heterogeneous photo-Fenton process.

Reactivity and O2 Formation by Mn(IV)- and Mn(V)-Hydroxo Species Stabilized within a Polyfluoroxometalate Framework.

Manganese(IV,V)-hydroxo and oxo complexes are often implicated in both catalytic oxygenation and water oxidation reactions. Much of the research in this area is designed to structurally and/or functionally mimic enzymes. On the other hand, the tendency of such mimics to decompose under strong oxidizing conditions makes the use of molecular inorganic oxide clusters an enticing alternative for practical applications. In this context it is important to understand the reactivity of conceivable reactive intermediates in such an oxide-based chemical environment. Herein, a polyfluoroxometalate (PFOM) monosubstituted with manganese, [NaH2(Mn-L)W17F6O55](q-), has allowed the isolation of a series of compounds, Mn(II, III, IV and V), within the PFOM framework. Magnetic susceptibility measurements show that all the compounds are high spin. XPS and XANES measurements confirmed the assigned oxidation states. EXAFS measurements indicate that Mn(II)PFOM and Mn(III)PFOM have terminal aqua ligands and Mn(V)PFOM has a terminal hydroxo ligand. The data are more ambiguous for Mn(IV)PFOM where both terminal aqua and hydroxo ligands can be rationalized, but the reactivity observed more likely supports a formulation of Mn(IV)PFOM as having a terminal hydroxo ligand. Reactivity studies in water showed unexpectedly that both Mn(IV)-OH-PFOM and Mn(V)-OH-PFOM are very poor oxygen-atom donors; however, both are highly reactive in electron transfer oxidations such as the oxidation of 3-mercaptopropionic acid to the corresponding disulfide. The Mn(IV)-OH-PFOM compound reacted in water to form O2, while Mn(V)-OH-PFOM was surprisingly indefinitely stable. It was observed that addition of alkali cations (K(+), Rb(+), and Cs(+)) led to the aggregation of Mn(IV)-OH-PFOM as analyzed by electron microscopy and DOSY NMR, while addition of Li(+) and Na(+) did not lead to aggregates. Aggregation leads to a lowering of the entropic barrier of the reaction without changing the free energy barrier. The observation that O2 formation is fastest in the presence of Cs(+) and ∼fourth order in Mn(IV)-OH-PFOM supports a notion of a tetramolecular Mn(IV)-hydroxo intermediate that is viable for O2 formation in an oxide-based chemical environment. A bimolecular reaction mechanism involving a Mn(IV)-hydroxo based intermediate appears to be slower for O2 formation.

Tris-functionalized hybrid Anderson polyoxometalates: synthesis, characterization, hydrolytic stability and inversion of protein surface charge.

Single- and double-sided functionalized hybrid organic-inorganic Anderson polyoxomolybdates with Ga(III) and Fe(III) positioned as central heteroatoms have been synthesized in a mild, two-step synthesis in an aqueous medium. Compounds 1-4 were isolated as hydrated salts, [TBA]3[GaMo6O18(OH)3{(OCH2)3CCH2OH}]×12 H2O (1) (TBA = tetrabutylammonium), Na3[FeMo6O18{(OCH2)3CCH2OH}2]×11 H2O (2), [TMA]2[GaMo6O18(OH)3{(OCH2)3CNH3}]×7 H2O (3) (TMA = tetramethylammonium), and Na[TMA]2[FeMo6O18(OH)3{(OCH2)3CNH3}](OH)×6 H2O (4). All the compounds were characterized based on single-crystal X-ray diffraction (SXRD), FTIR, UV/Vis, thermogravimetric, ESI-MS, NMR, and elemental analyses. Compound 1 was also crystallized with two smaller organic cations, giving [TMA]3[GaMo6O18(OH)3{(OCH2)3CCH2OH}]×n H2O (5) and [GDM]3[GaMo6O18(OH)3{(OCH2)3CCH2OH}]×n H2O (6) (GDM = guanidinium) and were characterized based on UV/Vis, NMR, FTIR, and elemental analyses. The use of these compounds as additives in macromolecular crystallography was investigated by examining their hydrolytic stability by using ESI-MS in a pH range of 4 to 9. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis showed that BSA remains intact in a solution containing up to 100 equivalents of 1 or 4 over more than four days at 20 °C. Zeta potential measurements demonstrate that 1-4 induce charge inversions on the positively charged surface of BSA (1 mg mL(-1)) with concentrations starting as low as 1.29 mM for compounds 1 and 2, which have the highest negative surface charge.

Generation of photocurrent by visible-light irradiation of conjugated dawson polyoxophosphovanadotungstate-porphyrin copolymers.

Four hybrid polyoxometalate-porphyrin copolymer films were obtained by the electrooxidation of zinc octaethylporphyrin in the presence of four different Dawson-type polyoxometalates bearing two pyridyl groups (POM(py)2) with various spacers. The POM monomers were designed around 1,3,5-trisubstituted benzene rings. Two of the substituents of the benzene ring are linked to the pyridyl groups, and the third is connected to the POM subunit. The four monomers vary in the relative positions of the nitrogen atoms of the pyridine rings or in the distance from the carbonyl group. The monomers were fully characterized by (1)H, (31)P, and (13)C NMR spectroscopy, electrospray mass spectrometry, IR and UV/Vis spectroscopy, and electrochemistry. The copolymers were characterized by UV/Vis spectroscopy, X-ray photoelectron spectroscopy, electrochemistry, and AFM. Their photovoltaic performance under visible light irradiation was investigated by photocurrent transient measurements under visible illumination.

Functionalization of Krebs-type polyoxometalates with N,O-chelating ligands: a systematic study.

The first organic derivatives of 3d-metal-disubstituted Krebs-type polyoxometalates have been synthesized under mild bench conditions via straightforward replacement of labile aqua ligands with N,O-chelating planar anions on either preformed or in situ-generated precursors. Nine hybrid clusters containing carboxylate derivatives of five- or six-membered aromatic N-heterocycles as antenna ligands have been obtained as pure crystalline phases and characterized by elemental and thermal analyses, infrared spectroscopy, and single-crystal X-ray diffraction. They all show the general formula [{M(II)L(H2O)}2(WO2)2(B-ß-XW9O33)2](n-) and can be classified as follows: 1-SbM, where L = 1H-imidazole-4-carboxylate (imc), X = Sb(III), n = 12, and M(II) = Mn, Co, Ni, Zn; 1-TeM, where L = imc, X = Te(IV), n = 10, and M(II) = Mn, Co; 2-SbNi, where L = 1H-pyrazole-3-carboxylate (pzc), X = Sb(III), n = 12, and M(II) = Ni; and 3-SbM, where L = pyrazine-2-carboxylate (pyzc), X =Sb(III), n = 12, and M(II) = Co, Zn. The 3d-metal-disubstituted tungstotellurate(IV) skeleton of compounds 1-TeM is unprecedented in polyoxometalate chemistry. The stability of these hybrid Krebs-type species in aqueous solution has been confirmed by (1)H NMR spectroscopy performed on the diamagnetic 1-SbZn and 3-SbZn derivatives. Our systematic study of the reactivity of disubtituted Krebs-type polyoxotungstates toward diazole-, pyridine-, and diazinecarboxylates demonstrates that organic derivatization is strongly dependent on the nature of the ligand, as follows: imc displays a "universal ligand" character, as functionalization takes place regardless of the external 3d metal and heteroatom; pzc and pyzc show selectivity toward specific 3d metals; pyridazine-3-carboxylate and pyrimidine-4-carboxylate promote partial decomposition of specific precursors, leading to [M(II)L2(H2O)2] complexes; and picolinate is inert under all conditions tested.

Synthesis and Structure of Hexatungstochromate(III), [H3Cr(III)W6O24]6-.

The hexatungstochromate(III) [H(3)Cr(III)W(6)O(24)](6-) (1) was synthesized in aqueous, basic medium by simple reaction of chromium(III) nitrate nonahydrate and sodium tungstate dihydrate in a 1:6 ratio. Polyanion 1 represents the first Anderson-Evans type heteropolytungstate with a trivalent hetero element. The sodium salt of 1 with the formula Na(6)[H(3)Cr(III)W(6)O(24)]·22H(2)O (1a) was fully characterized in the solid state by single crystal XRD, FT-IR spectroscopy, and thermogravimetric analysis.

All-inorganic networks and tetramer based on tin(II)-containing polyoxometalates: tuning structural and spectral properties with lone-pairs.

Two MOF-like but all-inorganic polyoxometalate-based networks, [Na7X2W18Sn9Cl5O68·(H2O)m]n (1, X = Si, m = 35; 2, X = Ge, m = 41), and the molecular tetramer Na6[{Na(µ-OH2)(OH2)2}6{Sn6(B-SbW9O33)2}2]·50H2O (3) have been prepared and characterized by X-ray diffraction and spectroscopic methods. All three compounds exhibit unique structural features, and networks 1 and 2 incorporate the highest nuclearity of Sn(II)-containing POMs to date. Tetramer 3 comprises bridging Sn(II) ions with [B-SbW9O33](9-) units and exhibits two highly unusual features, a long-range Sb···Sb interaction and an intramolecular charge-transfer transition involving donation of the lone-pair electron density on both Sb(III) and Sn(II) to the POM. The electronic structure and excited-state dynamics have been studied by transient spectroscopy, spectroelectrochemistry, DFT calculations, and resonance Raman spectroscopy. The synergistic effect of two types of stereoactive lone-pairs on Sb(III) and Sn(II) is critical for the charge-transfer absorption feature in the visible.