Enzymatic depolymerization of highly crystalline polyethylene terephthalate enabled in moist-solid reaction mixtures.

Less than 9% of the plastic produced is recycled after use, contributing to the global plastic pollution problem. While polyethylene terephthalate (PET) is one of the most common plastics, its thermomechanical recycling generates a material of lesser quality. Enzymes are highly selective, renewable catalysts active at mild temperatures; however, they lack activity toward the more crystalline forms of PET commonly found in consumer plastics, requiring the energy-expensive melt-amorphization step of PET before enzymatic depolymerization. We report here that, when used in moist-solid reaction mixtures instead of the typical dilute aqueous solutions or slurries, the cutinase from Humicola insolens can directly depolymerize amorphous and crystalline regions of PET equally, without any pretreatment, with a 13-fold higher space-time yield and a 15-fold higher enzyme efficiency than reported in prior studies with high-crystallinity material. Further, this process shows a 26-fold selectivity for terephthalic acid over other hydrolysis products.

The hydrolysis mechanism of a GH45 cellulase and its potential relation to lytic transglycosylase and expansin function.

Family 45 glycoside hydrolases (GH45) are endoglucanases that are integral to cellulolytic secretomes, and their ability to break down cellulose has been successfully exploited in textile and detergent industries. In addition to their industrial relevance, understanding the molecular mechanism of GH45-catalyzed hydrolysis is of fundamental importance because of their structural similarity to cell wall-modifying enzymes such as bacterial lytic transglycosylases (LTs) and expansins present in bacteria, plants, and fungi. Our understanding of the catalytic itinerary of GH45s has been incomplete because a crystal structure with substrate spanning the -1 to +1 subsites is currently lacking. Here we constructed and validated a putative Michaelis complex in silico and used it to elucidate the hydrolytic mechanism in a GH45, Cel45A from the fungus Humicola insolens, via unbiased simulation approaches. These molecular simulations revealed that the solvent-exposed active-site architecture results in lack of coordination for the hydroxymethyl group of the substrate at the -1 subsite. This lack of coordination imparted mobility to the hydroxymethyl group and enabled a crucial hydrogen bond with the catalytic acid during and after the reaction. This suggests the possibility of a nonhydrolytic reaction mechanism when the catalytic base aspartic acid is missing, as is the case in some LTs (murein transglycosylase A) and expansins. We calculated reaction free energies and demonstrate the thermodynamic feasibility of the hydrolytic and nonhydrolytic reaction mechanisms. Our results provide molecular insights into the hydrolysis mechanism in HiCel45A, with possible implications for elucidating the elusive catalytic mechanism in LTs and expansins.

Survival of thermophilic fungi in various preservation methods: A comparative study.

Thermophilic fungi have several biotechnological and industrial applications such as thermostable enzyme production, biodegradation, and tobacco processing, etc. Thermophilic fungi cannot survive at temperatures below 20 °C. Owing to their inability to grow at low temperatures, they are not stable, so stocking is very difficult. Although a large number of different storage methods are available and described, no method can be universally applied to all fungi. Thermophilic fungi present "heat-loving" characteristics, and therefore a new challenge for its preservation and there is no universal protocol for the preservation of thermophilic fungi. The aim of this study was to evaluate the viability, contamination and stability of thermophilic fungi stored under different preservation methods. In this work, 25 thermophilic fungal isolates of species Thermomyces thermophilus, Rhizomucor pusillus, Trichocladium griseum, Melanocarpus albomyces, Malbranchea cinnamomea, Thermothelomyces thermophilus, Thermothelomyces hinnuleus,Thermothielavioidesterrestris, Mycothermus thermophilus, Humicola insolens maintained constant sub-culturing at room temperature, +4 °C and +20 °C, lyophilization at +4 °C, freezing at -20 °C, freezing block at -20 °C and a new technique liquid preservation at room temperature for the periods ranging 5 years. We evaluated the effect of preservation methods by sub-culturing onto either sabouraud dextrose agar (SDA) or yeast extract soluble starch agar (YpSs) on growth, production and viability of spores and macro- and micromorphology. In this study, preservation methods for thermophilic fungi were investigated extensively for the first time and it is clearly shown that freezing block at -20 °C method and lyophilization were better methods for long-term preservation up to 5 years.

Natural Products of the Fungal Genus Humicola: Diversity, Biological Activity, and Industrial Importance.

Fungal metabolites are worthily taken into account as a pool of synthetically interesting and remarkably important new lead compounds for medical, agricultural, and chemical industries. Humicola species are known to have biotechnological and industrial potentials. Humicola genus (family Chaetomiaceae) is a prosperous fountainhead of unique and structurally diverse metabolites that have various bioactivities. Moreover, Humicola species attract substantial attention for their marked ability to produce thermostable enzymes with biotechnological and industrial importance. This review highlights the published researches on the isolated metabolites from the genus Humicola and their biological activities as well as the industrial importance of Humicola species. In the current review, more than 50 compounds are described and 84 references are cited.

Process strategies to improve biocatalytic depolymerization of post-consumer PET packages in bioreactors, and investigation on consumables cost reduction.

Massive plastics production has raised concerns about low recycling rates and disposal of these materials in nature, causing environmental and economic impacts. Poly(ethylene terephthalate) (PET) is one of main polymers used for manufacture of plastic packaging (e.g. bottles, trays). Enzymatic recycling of PET has been a route of increasing study aiming at to recover its monomers (terephthalic acid and ethylene glycol), resulting in a circular production chain. In this study, investigation of pH control and fractionation of enzyme feeding were explored in post-consumed PET (PC-PET) hydrolysis reactions catalyzed by Humicola insolens cutinase (HiC) in stirred reactors. It was found that the unbuffered reaction provided of pH control by 0.5 M NaOH addition showed 2.39-fold improvement in the released monomers (to a total of 26.3 mM), comparatively to the Tris-HCl-buffered reaction. In addition, it was observed a possibility of reducing the enzyme loading used in the process by half, leading to an increase of 2.41-fold in the specific terephthalic acid concentration released per protein amount, whilst maintaining a high products concentration (97 mM). A simplified cost analysis of reaction consumables was performed, and the data reported here demonstrates that these alternative process strategies contribute to costs reduction on the enzymatic depolymerization reactions of PET.

Biocatalyzed Synthesis of Flavor Esters and Polyesters: A Design of Experiments (DoE) Approach.

In the present work, different hydrolases were adsorbed onto polypropylene beads to investigate their activity both in short-esters and polyesters synthesis. The software MODDE® Pro 13 (Sartorius) was used to develop a full-factorial design of experiments (DoE) to analyse the thermostability and selectivity of the immobilized enzyme towards alcohols and acids with different chain lengths in short-esters synthesis reactions. The temperature optima of Candida antarctica lipase B (CaLB), Humicola insolens cutinase (HiC), and Thermobifida cellulosilytica cutinase 1 (Thc_Cut1) were 85 °C, 70 °C, and 50 °C. CaLB and HiC preferred long-chain alcohols and acids as substrate in contrast to Thc_Cut1, which was more active on short-chain monomers. Polymerization of different esters as building blocks was carried out to confirm the applicability of the obtained model on larger macromolecules. The selectivity of both CaLB and HiC was investigated and best results were obtained for dimethyl sebacate (DMSe), leading to polyesters with a Mw of 18 kDa and 6 kDa. For the polymerization of dimethyl adipate (DMA) with BDO and ODO, higher molecular masses were obtained when using CaLB onto polypropylene beads (CaLB_PP) as compared with CaLB immobilized on macroporous acrylic resin beads (i.e., Novozym 435). Namely, for BDO the Mn were 7500 and 4300 Da and for ODO 8100 and 5000 Da for CaLB_PP and for the commercial enzymes, respectively. Thc_Cut1 led to polymers with lower molecular masses, with Mn < 1 kDa. This enzyme showed a temperature optimum of 50 °C with 63% of DMA and BDO when compared to 54% and 27%, at 70 °C and at 85 °C, respectively.

Unravelling the temporal and spatial variation of fungal phylotypes from embryo to adult stages in Atlantic salmon.

Early microbial colonization has a profound impact on host physiology during different stages of ontogeny. Although several studies have focused on early bacterial colonization and succession, the composition and role of fungal communities are poorly known in fish. Here, we sequenced the internal transcribed spacer 2 (ITS2) region of fungi to profile the mycobiome associated with the eggs, hatchlings and intestine of Atlantic salmon at various freshwater and marine stages. In most of the stages studied, fungal diversity was lower than bacterial diversity. There were several stage-specific fungal phylotypes belonging to different stages of ontogeny but some groups, such as Candida tropicalis, Saccharomyces cerevisiae, Alternaria metachromatica, Davidiella tassiana and Humicola nigrescens, persisted during successive stages of ontogeny. We observed significant changes in the intestinal fungal communities during the first feeding. Prior to first feeding, Humicola nigrescens dominated, but Saccharomyces cerevisiae (10 weeks post hatch) and Candida tropicalis (12 weeks post hatch) became dominant subsequently. Seawater transfer resulted in a decrease in alpha diversity and an increase in Candida tropicalis abundance. We also observed notable variations in beta diversity and composition between the different farms. Overall, the present study sheds light on the fungal communities of Atlantic salmon from early ontogeny to adulthood. These novel findings will also be useful in future studies investigating host-microbiota interactions in the context of developing better nutritional and health management strategies for Atlantic salmon farming.

[Characterization of Humicola insolens cutinase-tachystatin A2 fusion protein and its application in treatment of recycled paper stickies].

With the decrease of forest timber resources, the recycling of waste paper has received increasing attention. However, the stickies produced in the process of waste paper recycling may negatively affect the production of recycled paper. The biological decomposition of stickies, which has the advantages of high efficiency, high specificity and pollution-free, is achieved mainly through the enzymatic cleavage of the ester bond in the stickies components to prevent flocculation. Cutinase is a serine esterase that can degrade some components of the stickies. Previous research indicated that the anchor peptide tachystatin A2 (TA2) is able to bind polyurethane. In this study, the cutinase HiC derived from Humicola insolens was used to construct a fusion protein HiC-TA2 by megaprimer PCR of the whole plasmid (MEGAWHOP). The enzymatic properties and the degradation efficiency of the fusion protein on poly(ethyl acrylate) (PEA), a model substrate of stickies component, were determined. The results showed that the degradation efficiency, the size decrease of PEA particle, and the amount of ethanol produced by HiC-TA2 were 1.5 times, 6.8 times, and 1.4 times of that by HiC, respectively. These results demonstrated that TA2 improved the degradation efficiency of HiC on PEA. This study provides a useful reference for biological decomposition of stickies produced in the process of recycled paper production.

Soil fungal communities affect the chemical quality of flue-cured tobacco leaves in Bijie, Southwest China.

Soil microorganisms could affect the quality of tobacco leaves, however, little is known about the association of tobacco chemical components and soil fungal communities. In the present study, the relationship between soil fungi and tobacco quality based on chemical components in Bijie was investigated. The results showed that the total harmony scores (THS) of the analyzed tobacco leaves ranged from 46.55 ± 3.5 to 91.55 ± 2.25. Analyses of chemical components revealed that high contents of nicotine (≥ 1.06%) and sugar (total sugar: ≥ 22.96%, reducing sugar: ≥ 19.62%), as well as low potassium level (≤ 2.68%) were the main factors limiting the quality of flue-cured tobacco leaves. Pearson correlation analysis indicated that soil nitrate, available potassium/phosphorous, and organic matter significantly correlated with tobacco nicotine, potassium, and chloride levels (p < 0.05). Besides, the analysis of alpha- and beta-diversity of soil fungal communities implied that fungal structure rather than the richness affected the chemical quality of tobacco. In detail, the relative abundance of Humicola olivacea species in soils was positively correlated with the THS of tobaccos (r = 0.52, p < 0.05). Moreover, the species including Mortierella alpina, Mortierella hyalina, Tausonia pullulan, and Humicola olivacea were negatively correlated with tobacco sugar (r ≤ - 0.45, p < 0.05) while, Codinaea acaciae and Saitozyma podzolica species were negatively correlated with tobacco nicotine (r ≤ - 0.51, p < 0.05). The present study provides a preliminary basis for utilizing fungal species in soils to improve the chemical quality of tobacco in the studied area.

Glucomannan and beta-glucan degradation by Mytilus edulis Cel45A: Crystal structure and activity comparison with GH45 subfamily A, B and C.

The enzymatic hydrolysis of barley beta-glucan, konjac glucomannan and carboxymethyl cellulose by a ß-1,4-D-endoglucanase MeCel45A from blue mussel, Mytilus edulis, which belongs to subfamily B of glycoside hydrolase family 45 (GH45), was compared with GH45 members of subfamilies A (Humicola insolens HiCel45A), B (Trichoderma reesei TrCel45A) and C (Phanerochaete chrysosporium PcCel45A). Furthermore, the crystal structure of MeCel45A is reported. Initial rates and hydrolysis yields were determined by reducing sugar assays and product formation was characterized using NMR spectroscopy. The subfamily B and C enzymes exhibited mannanase activity, whereas the subfamily A member was uniquely able to produce monomeric glucose. All enzymes were confirmed to be inverting glycoside hydrolases. MeCel45A appears to be cold adapted by evolution, as it maintained 70% activity on cellohexaose at 4 °C relative to 30 °C, compared to 35% for TrCel45A. Both enzymes produced cellobiose and cellotetraose from cellohexaose, but TrCel45A additionally produced cellotriose.

Experimental and mathematical modeling approaches for biocatalytic post-consumer poly(ethylene terephthalate) hydrolysis.

The environmental impact arising from poly(ethylene terephthalate) (PET) waste is notable worldwide. Enzymatic PET hydrolysis can provide chemicals that serve as intermediates for value-added product synthesis and savings in the resources. In the present work, some reaction parameters were evaluated on the hydrolysis of post-consumer PET (PC-PET) using a cutinase from Humicola insolens (HiC). The increase in PC-PET specific area leads to an 8.5-fold increase of the initial enzymatic hydrolysis rate (from 0.2 to 1.7 mmol L-1 h-1), showing that this parameter plays a crucial role in PET hydrolysis reaction. The effect of HiC concentration was investigated, and the enzymatic PC-PET hydrolysis kinetic parameters were estimated based on three different mathematical models describing heterogeneous biocatalysis. The model that best fits the experimental data (R2 = 0.981) indicated 1.68 mgprotein mL-1 as a maximum value of the enzyme concentration to optimize the reaction rate. The HiC thermal stability was evaluated, considering that it is a key parameter for its efficient use in PET degradation. The enzyme half-life was shown to be 110 h at 70 ºC and pH 7.0, which outperforms most of the known enzymes displaying PET hydrolysis activity. The results evidence that HiC is a very promising biocatalyst for efficient PET depolymerization.

Enhanced activity towards polyacrylates and poly(vinyl acetate) by site-directed mutagenesis of Humicola insolens cutinase.

Previous studies on the hydrolysis of polyacrylates by cutinase have found that cutinase from Humicola insolens can fulfill the requirement for a thermostable cutinase in the treatment of stickies from papermaking, but it has poor hydrolysis ability. To further improve its ability to hydrolyze the polymers in papermaking, we analyzed the structure of cutinase from H. insolens, and constructed three mutants L66A, I169A, and L66A/I169A to reduce the steric hindrance of the substrate binding region. The hydrolysis results for poly(methyl acrylate), poly(ethyl acrylate), and poly(vinyl acetate) showed the catalytic ability of the mutant L66A/I169A most significantly improved. Using polymer macroporous resin composites as substrate, the released products of L66A/I169A were 1.3-4.4 times higher than that of the wild-type enzyme. When polymer suspensions were no longer being deposited, that is, when the turbidity decrease was less than 1%, the amount of L66A/I169A added was reduced by 19%-51% compared with that of the wild-type enzyme. These results indicated that the removal of the gatekeeper structure above the substrate binding region of H. insolens cutinase enhances its ability to hydrolyze polymers, and provided a basis for the application of cutinase in the practical treatment of stickies.