Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 4.926
Filtrar
Mais filtros

Intervalo de ano de publicação
1.
Clin Oral Investig ; 28(5): 255, 2024 Apr 17.
Artigo em Inglês | MEDLINE | ID: mdl-38630185

RESUMO

OBJECTIVES: To evaluate the trueness of the digital maxillary occlusal records in comparison with the conventional records for the fabrication of complete-arch implant-supported fixed prostheses. MATERIALS AND METHODS: This randomized controlled clinical trial followed the recommendations of the CONSORT statement. Twenty participants who used a mandibular interim complete-arch fixed prosthesis and conventional complete maxillary dentures were included in the study. The participants were randomized into two types of maxillary occlusal records: conventional (COR) and digital (DOR) (TRIOS; Shape A/S). After fabricating the prostheses, the distribution and number of occlusal contact points, and the time taken to obtain the maxillary occlusal record and work model were evaluated. Descriptive analysis was used to evaluate the distribution of occlusal contact points. The Wilcoxon test was employed for assessing the number of occlusal contact points, while the Mann-Whitney U test was used for the time taken to obtain the working casts and the maxillary occlusal record and occlusal adjustment times (p < 0.05). RESULTS: There was a similarity in the jaw relation recording methods regarding the distribution of occlusal contact points. There was no difference in the number of occlusal contact points between the anterior (p = 0.439) and posterior (p = 0.227) teeth. No relationship was observed between the distribution and number of occlusal contact points (COR, p = 0.288; DOR, p = 0.183). DOR required less occlusal and clinical adjustment time, on the other hand more laboratory and total workflow time than COR (p < 0.001). CONCLUSION: The DOR may be an option for obtaining the functional space necessary for the assembly of teeth in complete-arch implant-supported fixed prostheses; however, it requires more working time. CLINICAL RELEVANCE: The digital occlusal recording method can be used to assess the interocclusal space for the virtual tooth setup of a complete-arch implant-supported fixed prosthesis.


Assuntos
Implantes Dentários , Humanos , Prótese Total , Registro da Relação Maxilomandibular , Laboratórios , Mandíbula
2.
Clin Oral Investig ; 28(4): 233, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38556612

RESUMO

OBJECTIVES: Reconstruction of a three-dimensional jaw position determined by a bite recording is an important aspect of prosthetic therapy. Different materials are used for this purpose. In the dental technical workflow, recordings are used to mount a lower jaw cast in a patient-like spatial position relative to the upper jaw cast. We evaluated the accuracy of positioning under the influence of different jaw positions and materials. MATERIALS AND METHODS: In an experimental setup, comprising an articulator, a pair of metal casts, and an optoelectronic measurement system, the spatial position of the incisal point and two condylar points were measured. To evaluate the accuracy of repeated repositioning of casts in the technical workflow, 324 measurements were taken from 108 recordings, consisting of silicone bite-stops made of addition curing silicone with 95 shore hardness, acrylic wafers, and wax recordings. The recordings were obtained in four jaw relations differing in vertical and protrusive components. RESULTS: Of the three materials/material combinations examined, silicone showed the most consistent results across all measurements, followed by the acrylic wafer system, and then wax recordings. Generally, recordings with smaller gaps between the jaws and no protrusive components showed greater deviations compared to jaw positions with greater protrusion and higher vertical dimensions. CONCLUSIONS AND CLINICAL RELEVANCE: To achieve reliable model mounting with high accuracy, recordings should include the use of a frontal jig and four small recording platelets made of silicone, especially if only a slight elevation of the vertical dimension is needed.


Assuntos
Articuladores Dentários , Mandíbula , Humanos , Registro da Relação Maxilomandibular/métodos , Dimensão Vertical , Silicones
3.
Clin Oral Investig ; 28(6): 320, 2024 May 16.
Artigo em Inglês | MEDLINE | ID: mdl-38750145

RESUMO

OBJECTIVES: The purpose of this scoping review was to identify different methods employed for recording the maxillomandibular relationship (MMR) for computer-aided designed and manufactured (CAD-CAM) complete dentures (CDs). MATERIALS AND METHODS: This scoping review followed the PRISMA-ScR guidelines and was developed according to Arksey and O'Malley and The Joanna Briggs Institute protocol. The methods were registered on the Open Science Framework (< osf.io/rf4xm> ). The focus question was: "What are the different techniques for recording the maxillomandibular relationship in the digital workflow used in CECDs?" Two investigators searched 3 online databases [MEDLINE (PubMed), Scopus, and Science Direct] independently. The inclusion criteria were clinical studies and reviews that assessed techniques for recording MMR using digital workflow for manufacturing of CECDs. A descriptive analysis was performed considering the study design, manufacturing system, clinical steps, and tools for the determination of MMR, and the difficulty level of procedures. RESULTS: 4779 articles were identified in the electronic search and 10 studies were included for data analysis. The review identified 4 commercially available CAD-CAM denture systems and 3 innovative methods suitable for abbreviating the number of appointments (2 to 4 visits). The trial denture is inherent to the procedure for the Baltic System and 3 innovative techniques. Three techniques (2 innovative and WholeYouNexteeth) demonstrated lower difficulty levels for performing the clinical procedures, regardless of the professional skills. CONCLUSIONS: The commercially available and innovative techniques for the recording of MMR may provide predictability of the treatment. The techniques are effective, however, rely on the learning curve and the patient's clinical condition. CLINICAL RELEVANCE: Recording of the maxillomandibular relationship is paramount for the manufacturing and functionality of complete dentures. Clinicians should be aware of the different tools and techniques described for registering the jaw relationship.


Assuntos
Desenho Assistido por Computador , Planejamento de Dentadura , Prótese Total , Humanos , Planejamento de Dentadura/métodos , Registro da Relação Maxilomandibular/métodos
4.
J Esthet Restor Dent ; 36(5): 710-722, 2024 May.
Artigo em Inglês | MEDLINE | ID: mdl-38131436

RESUMO

OBJECTIVE: The purpose of this article was to introduce a method for the digital application of three-dimensional (3D) diagnosis and treatment with a virtual articulator and 3D data. CLINICAL CONSIDERATION: With the use of cone-beam computed tomography (CBCT) and intraoral and facial scans, we can create a virtual articulator and evaluate the mandibular position in maximum intercuspation and centric-related occlusion for the patient with an unstable occlusion and temporomandibular disorders (TMD). Based on this, we treated a case using a digital mandibular position indicator (MPI) and fabricated a stabilization splint using a 3D printer. This approach eliminates the traditional impression or model mounting process and the analog face bow transfer. Furthermore, the design of the stabilization splint is accomplished using software. CONCLUSIONS: The approach outlined in this article offers the potential for a digital diagnosis and treatment process by seamlessly integrating CBCT, intraoral scans, and facial scans with a high degree of accuracy. This may enhance precision in diagnosis and treatment planning, especially for patients with complicated TMD, in addition to facilitating effective communication with orthodontic patients who require thorough attention. CLINICAL SIGNIFICANCE: Utilizing a virtual articulator and digital MPI for the occlusal evaluation of patients with TMD and unstable occlusion makes it possible to diagnose and analyze the occlusal condition accurately. This approach also allows for precision and efficiency in treatment.


Assuntos
Articuladores Dentários , Imageamento Tridimensional , Humanos , Registro da Relação Maxilomandibular/métodos , Imageamento Tridimensional/métodos , Modelos Dentários , Oclusão Dentária , Tomografia Computadorizada de Feixe Cônico/métodos
5.
BMC Oral Health ; 24(1): 345, 2024 Mar 18.
Artigo em Inglês | MEDLINE | ID: mdl-38500122

RESUMO

BACKGROUND: Finding and registering the maxillary-mandibular jaw relation is crucial in dental practice. Several comparative studies have been conducted to investigate the reproducibility and accuracy of techniques for determining the centric relation (CR) position of the mandible. The aim of our study was to determine which of seven different CR determination methods had the smallest deviation from the theoretical zero with the help of a digital mandibular motion analyser. The chosen theoretical zero position, the maximal intercuspal position (MIP), is the most reproducible and widely used position. METHODS: Thirty-four volunteers (24 females and 10 males) with a mean (SD) age of 29.1 (± 7.3) years with a negative history of temporomandibular disorder (TMD) participated in the study. A digital mandibular motion analyser was used to register the condylar position after the use of each technique for the determination of CR. The calibration was performed to the maximal intercuspal position (MIP) for each volunteer. The investigated techniques were (A) the gothic arch tracer, (B) the adduction field method, (C) Dawson's bimanual manipulation, (D) the patient placing the tongue tip on the palatal rugae, (E) the patient placing the tongue tip to the border of the hard and soft palate, (F) the patient actively pulling the chin backwards, and (G) the examiner pushing the patient's chin back. RESULTS: The position of the mandibular condyle was illustrated in a three-dimensional coordinate system, where the origin represented the MIP. Among the seven methods examined, five showed significant deviations compared to the MIP. Among these, two methods resulted in posterior deviation of the condyles. Methods C and E coincided with the MIP in all directions. CONCLUSIONS: Within the limitations of our study, we found that the smallest deviations from our theoretical zero (MIP) among the investigated centric relation determining methods were obtained with the bimanual mandibular manipulation technique derived from Dawson and the placement of the tongue tip on the border of the hard and soft palate (linguomandibular homotrophy theory).


Assuntos
Mandíbula , Côndilo Mandibular , Masculino , Feminino , Humanos , Adulto Jovem , Adulto , Relação Central , Reprodutibilidade dos Testes , Queixo , Registro da Relação Maxilomandibular
6.
Int J Comput Dent ; 27(1): 37-48, 2024 Mar 26.
Artigo em Inglês | MEDLINE | ID: mdl-36811289

RESUMO

AIM: To summarize the features of condylar kinematics in patients with condylar reconstruction using a mandibular motion simulation method based on intraoral scanning registration. MATERIALS AND METHODS: Patients undergoing unilateral segmental mandibulectomy and autogenous bone reconstruction as well as healthy volunteers were enrolled in the study. Patients were grouped based on whether the condyles were reconstructed. Mandibular movements were recorded using a jaw tracking system, and kinematic models were simulated after registration. The path inclination of the condyle point, margin of border movement, deviation, and chewing cycle were analyzed. A t test and one-way analysis of variance (ANOVA) were carried out. RESULTS: A total of 20 patients, including 6 with condylar reconstruction and 14 with condylar preservation as well as 10 healthy volunteers were included. The patients with condylar reconstruction showed flatter movement paths of the condyle points. The mean inclination angle of the condylar movement paths of the patients with condylar reconstruction (0.57 ± 12.54 degrees) was significantly smaller than that of those with condylar preservation (24.70 ± 3.90 degrees, P = 0.014) during both maximum opening and protrusion (7.04 ± 12.21 degrees and 31.12 ± 6.79 degrees, respectively, P = 0.022). The inclination angle of the condylar movement paths of the healthy volunteers was 16.81 ± 3.97 degrees during maximum opening and 21.54 ± 2.80 degrees during protrusion; no significant difference compared with the patients. The condyles of the affected side tended to deviate laterally in all patients during mouth opening and protrusion. Patients with condylar reconstruction showed more severe symptoms of mouth opening limitation and mandibular movement deviation as well as shorter chewing cycles than patients with condylar preservation. CONCLUSION: Patients with condylar reconstruction showed flatter movement paths of the condyle points, greater lateral motion range, and shorter chewing cycles than those with condylar preservation. The method of mandibular motion simulation based on intraoral scanning registration was feasible to simulate condylar movement.


Assuntos
Côndilo Mandibular , Transtornos da Articulação Temporomandibular , Humanos , Côndilo Mandibular/cirurgia , Fenômenos Biomecânicos , Registro da Relação Maxilomandibular , Movimento , Rotação , Articulação Temporomandibular , Amplitude de Movimento Articular
7.
Clin Oral Investig ; 27(7): 4039-4050, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-37126145

RESUMO

OBJECTIVE: Whether it is primarily the spine that reacts with pain to the negative consequences of everyday stress and possibly the temporomandibular system as a result (ascending chain), or whether incorrect stress in the dental area has an influence on body geometry (descending chain), is still a controversially discussed topic. The aim of this study is to investigate possible relationships between constitutional, axiographic, and dental parameters with upper body posture. MATERIAL AND METHODS: A total of 106 subjectively healthy women between 31 and 40 years of age voluntarily participated in this study. Data collection was done by filling out a questionnaire with constitutional and anamnestic parameters and by evaluating orthodontic casts, axiographic measurements, and video raster stereographic measurements. These data were analyzed using correlations and group comparisons, with the significance level set at p ≤ 0.05. RESULTS: Positive correlations were shown between the constitutional factors of body weight and BMI and the lumbar bending angle (p = 0.01), the kyphosis angle (p = 0.001), and lordosis angle (weight p = 0.05; BMI p = 0.03). In the cast analysis, regardless of the direction of the midline shift (left/right/none), a left lateral tilt can be seen which is greatest at 2.12° with a left midline shift. In addition, the elevated pelvic side correlates with the side of the displacement of the jaw, with the stronger manifestation being on the left side. With a vertical anterior bite in the normal range, the kyphosis angle is 48.09°, while with a deep bite, it is 60.92°, and with an open bite, it is 62.47°; thus, the group in the normal range differs significantly (p = 0.01) from the other two. The greater the protrusion, the smaller the sagittal plane angles (kyphosis angle, lumbar bending angle, each p = 0.03), and the more dorsal the posture (p = 0.04). The lordosis angle differs significantly (p = 0.001) between the group of subjects with a protrusion in the normal range (52.34°) and the group with an increased advancement of the mandible (41.79°). CONCLUSION: There is a correlation between body weight, BMI, midline shift, and protrusion, as well as the vertical anterior step and upper body posture in women between 31 and 40 years of age. Interdisciplinary functional examinations of the temporomandibular musculature, and also sustained orthodontic treatment, can contribute to an improvement in upper body posture.


Assuntos
Cifose , Lordose , Humanos , Feminino , Adulto , Postura , Registro da Relação Maxilomandibular , Peso Corporal
8.
Clin Oral Investig ; 27(2): 489-504, 2023 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-36577849

RESUMO

BACKGROUND: To explore the digitisation of jaw movement trajectories through devices and discuss the physiological factors and device-dependent variables with their subsequent effects on the jaw movement analyses. METHODS: Based on predefined eligibility criteria, the search was conducted following PRISMA-P 2015 guidelines on MEDLINE, EBSCO Host, Scopus, PubMed, and Web of Science databases in 2022 by 2 reviewers. Articles then underwent Cochrane GRADE approach and JBI critical appraisal for certainty of evidence and bias evaluation. RESULTS: Thirty articles were included following eligibility screening. Both in vitro experiments (20%) and in vivo (80%) devices ranging from electronic axiography, electromyography, optoelectronic and ultrasonic, oral or extra-oral tracking, photogrammetry, sirognathography, digital pressure sensors, electrognathography, and computerised medical-image tracing were documented. 53.53% of the studies were rated below "moderate" certainty of evidence. Critical appraisal showed 80% case-control investigations failed to address confounding variables while 90% of the included non-randomised experimental studies failed to establish control reference. CONCLUSION: Mandibular and condylar growth, kinematic dysfunction of the neuromuscular system, shortened dental arches, previous orthodontic treatment, variations in habitual head posture, temporomandibular joint disorders, fricative phonetics, and to a limited extent parafunctional habits and unbalanced occlusal contact were identified confounding variables that shaped jaw movement trajectories but were not highly dependent on age, gender, or diet. Realistic variations in device accuracy were found between 50 and 330 µm across the digital systems with very low interrater reliability for motion tracing from photographs. Forensic and in vitro simulation devices could not accurately recreate variations in jaw motion and muscle contractions.


Assuntos
Mandíbula , Movimento , Registro da Relação Maxilomandibular/métodos , Reprodutibilidade dos Testes
9.
Clin Oral Investig ; 27(7): 4017-4028, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-37247089

RESUMO

OBJECTIVES: This clinical study aimed to compare the performance of various virtual articulator (VA) mounting procedures in the participants' natural head position (NHP). MATERIALS AND METHODS: Fourteen participants with acceptable dentitions and jaw relationships were recruited in this study registered in the Clinical Trials Registry (#NCT05512455; August 2022). A virtual facebow was designed for virtual mounting and hinge axis measurement. Intraoral scans were obtained, and landmarks were placed on each participant's face to register the horizontal plane in NHP. Six virtual mounting procedures were performed for each participant. The average facebow group (AFG) used an indirect digital procedure by using the average facebow record. The average mounting group (AMG) aligned virtual arch models to VA's average occlusal plane. The smartphone facial scan group (SFG) and professional facial scan group (PFG) used facial scan images with Beyron points and horizontal landmarks, respectively. The cone-beam computed tomography (CBCT) scan group (CTG) used the condyle medial pole, and horizontal landmarks were applied. The kinematic facebow group (KFG) served as the control group, and a direct digital procedure was applied using a kinematic digital facebow and the 3D skull model. Deviations of the reference plane and the hinge axis between the KFG and other groups were calculated. The inter-observer variability in virtual mounting software operation was then evaluated using the interclass correlation coefficient (ICC) test. RESULTS: In virtual condylar center deviations, the CTG had the lowest condylar deviations. The AFG showed larger condylar deviations than PFG, SFG, and CTG. There was no statistically significant difference between the AFG and the AMG and between the PFG and the SFG. In reference plane deviations, the AMG showed the largest angular deviation (8.23 ± 3.29°), and the AFG was 3.89 ± 2.25°. The angular deviations of PFG, SFG, and CTG were very small (means of each group < 1.00°), and there was no significant difference among them. There was no significant difference between the researchers, and the ICC test showed moderate to excellent reliability for the virtual condylar center and good to excellent reliability for the reference plane in the operation of the virtual mounting software. CONCLUSIONS: CBCT scan provided the lowest hinge axis deviation in virtual mounting compared to average mounting, facebow record, and facial scans. The performance of the smartphone facial scanner in virtual mounting was similar to that of the professional facial scanner. Direct virtual mounting procedures using horizontal landmarks in NHP accurately recorded the horizontal plane. CLINICAL RELEVANCE: Direct digital procedures can be reliably used for virtual articulator mounting. The use of a smartphone facial scanner provides a suitable and radiation-free option for clinicians.


Assuntos
Articuladores Dentários , Oclusão Dentária , Humanos , Registro da Relação Maxilomandibular/métodos , Maxila , Reprodutibilidade dos Testes
10.
J Oral Rehabil ; 50(7): 617-626, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-36943389

RESUMO

BACKGROUND: Evaluating occlusal contacts during maximum intercuspation is one of the requirements for guiding clinicians during occlusal corrections and has been a topic of considerable importance for researchers over many decades. OBJECTIVE: This systematised review intends to evaluate the average number of occlusal contacts present in dentate adults, as documented within the dental literature over the past four decades (1980s-2022). METHODOLOGY: Electronic searches were conducted in three databases (PubMed, Livivo and Ovid) using a combination of search words. RESULTS: A total of 651 records were identified through PubMed and another 37 records through Livivo and Ovid databases. After eliminating duplicates and irrelevant records, 168 records were screened. Full texts of 61 articles remained, out of which 18 relevant papers that presented occlusal contacts in quantifiable value were considered. Various occlusal indicators, such as articulating paper, wax sheets, shimstock foil, impression material, gnathodynamometers and digital occlusal analysis systems, were used to evaluate occlusal contacts. The number of occlusal contacts widely ranged from 11 to 70. These variations likely depends upon the type and technique of occlusal indicator used, diversity among sampled populations and differing data collection procedures. CONCLUSION: Different methods of identifying occlusal contacts in the intercuspal position yield different numbers and patterns of contacts, depending on the nature and physical properties of the indicators used.


Assuntos
Materiais para Moldagem Odontológica , Oclusão Dentária , Humanos , Adulto , Registro da Relação Maxilomandibular/métodos , Mandíbula
11.
J Esthet Restor Dent ; 35(7): 1068-1076, 2023 10.
Artigo em Inglês | MEDLINE | ID: mdl-37132534

RESUMO

OBJECTIVE: This technique aimed to describe a fully digital workflow to register maxillomandibular relation for fixed prosthetic rehabilitation. CLINICAL CONSIDERATIONS: Mandibular kinematics could be reproduced in a four-dimensional (4D) virtual patient based on the intraoral scan, facial scan, cone beam computed tomography, and jaw motion trajectory, which helped record centric relation and determine a proper occlusal vertical dimension in a virtual environment. The therapeutic position could be exported directly to the dental computer-aided design software for digital waxing design with a facial scan. The 4D virtual patient was also used to verify the functional and esthetic outcomes of provisional restorations. CONCLUSIONS: This novel approach digitized the process of determination, delivery, and double-check of maxillomandibular relation, thus contributing to the establishment of a completely digital workflow for fixed prosthetic rehabilitation. CLINICAL SIGNIFICANCE: Registration of maxillomandibular relation, including centric relation and occlusal vertical dimension is critical to the success of prosthetic rehabilitation. Traditional procedures are complex and time-consuming, and heavily rely on the clinical experience of dentists. A fully digital approach to creating a 4D virtual patient and registering the maxillomandibular relation is established, which guides to determine a proper occlusal vertical dimension in centric relation. Digital delivery and double-check can simplify the conventional procedure and ensure that the determined maxillomandibular relation is reliable.


Assuntos
Desenho Assistido por Computador , Mandíbula , Humanos , Fluxo de Trabalho , Dimensão Vertical , Registro da Relação Maxilomandibular/métodos
12.
J Prosthet Dent ; 130(1): 119-123, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-34736765

RESUMO

STATEMENT OF PROBLEM: Scientific data to support scannable and computer-aided design and computer-aided manufacturing (CAD-CAM)-compatible interocclusal registration materials are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the ability of different registration materials (conventional versus scannable) to record maxillary-mandibular relationships and compare the dimensional stability of these records after storage times of 1 hour and 48 hours. MATERIAL AND METHODS: Six groups of interocclusal registration materials were tested: 3 conventional (Registrado X-tra, Futar D Fast, and O-Bite) and 3 scannable (Registrado Scan, Futar Cut & Trim Fast, and O-Bite Scan). Eight registrations were made for each group by using a custom-made device with a dial gauge to measure vertical discrepancies. Records were stored at room temperature, and discrepancies measured after 1 hour and 48 hours. The data were statistically analyzed with the Wilcoxon test with respect to time and the Kruskal-Wallis test with respect to materials, followed by the Mann-Whitney test with the Bonferroni-Holm correction (α=.05). RESULTS: The median vertical discrepancies ranged from -2 µm (FS) to 11 µm (O-Bite) after 1 hour and from 3 µm (Futar Cut & Trim Fast) to 13 µm (Registrado X-tra and O-Bite) after 48 hours. A statistically significant difference (P<.001) was found between the results after 1 hour and 48 hours for all materials. All scannable interocclusal registration materials showed significantly lower vertical discrepancies than the corresponding conventional materials after 1 hour and 48 hours (P<.05). CONCLUSIONS: All registration materials showed vertical discrepancies that might be clinically acceptable. Vertical discrepancies increased after 48 hours of storage for all materials but were still clinically acceptable.


Assuntos
Materiais para Moldagem Odontológica , Siloxanas , Registro da Relação Maxilomandibular , Polivinil , Oclusão Dentária , Desenho Assistido por Computador
13.
J Prosthet Dent ; 130(3): 288-294, 2023 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-34887077

RESUMO

This technique report presents a novel method of digitally replicating a treatment denture and converting it into a definitive denture. The procedure accurately duplicates the appearance of the mucosal surface and border of the treatment dentures, mounts the jaw relation on a virtual articulator to arrange artificial teeth, and optimizes the occlusion based on recorded mandibular motion tracks. This technique uses personalized jaw relation transfer and dynamic occlusal adjustment to establish balanced occlusion, which accomplishes the digital duplication of the treatment denture with high accuracy and minimal effort.


Assuntos
Prótese Total , Ajuste Oclusal , Fluxo de Trabalho , Planejamento de Dentadura/métodos , Oclusão Dentária , Articuladores Dentários , Registro da Relação Maxilomandibular/métodos
14.
J Prosthet Dent ; 129(3): 472-477, 2023 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-34330530

RESUMO

STATEMENT OF PROBLEM: Research evaluating the accuracy of anterior tooth mold templates to computer-aided design and computer-aided manufacture (CAD-CAM) fabricated complete removable dental prostheses (CRDPs) is limited. PURPOSE: The purpose of this in vitro study was to investigate the accuracy of the anterior denture tooth arrangement on CAD-CAM complete removable dental prostheses made with the anterior tooth mold template. MATERIAL AND METHODS: A maxillary and mandibular edentulous model was mounted on a semiadjustable articulator to simulate a patient's maxillary arch. Definitive impressions and jaw relation records were made as per the manufacturer's protocol. A maxillary and mandibular anatomic measuring device was completely seated onto the edentulous models, centered on the edentulous model midline, and horizontally positioned parallel to the mandibular ridge. A medium-size anterior tooth mold template sticker was attached on the anatomic measuring device to identify the maxillary dental midline and incisal edge position and was sent to the manufacturer as the proposed tooth arrangement reference for the definitive complete removable dental prostheses. A total of 10 milled complete removable dental prostheses were generated for 2 groups by using 2 different tooth arrangement techniques. One group (n=5) used the monobloc milling technique without bonding of denture teeth, while the other group (n=5) used the bonding system for denture teeth on the milled denture base. For comparison, a camera mounted on a tripod was used for photographic documentation. Reference markers placed on the edentulous model were used to orient and measure the difference of 4 aspects of the anterior tooth arrangement: average incisal edge position, intercanine distance, midline, and clinical crown length of the left central incisor. The difference values between the tooth mold template and definitive complete removable dental prostheses were statistically analyzed by multivariate ANOVA (α=.05) and 1-sample t tests (adjusted α=.0125). RESULTS: Overall, statistically significant differences were found between the tooth mold template (control) and definitive complete removable dental prostheses at all measuring aspects except for the midline of the midline of the milled arrangement technique (P<.0125). In terms of the midline value, the value of the milled group did not show a significant difference compared with tooth mold template (-0.19 mm). However, the value of the bonded group indicated a significant difference of midline (0.44 mm toward to the left of the tooth mold template midline). When the complete removable dental prosthesis milled denture tooth and complete removable dental prosthesis bonded denture tooth techniques were compared, there was no difference in the tested variables between the milled and the bonded groups (P>.0125). CONCLUSIONS: The tooth mold template did not represent an accurate position for definitive complete removable dental prostheses for either the milled or bonded techniques. The largest differences were found at the average incisal edge of the anterior teeth and the intercanine distance for both groups. However, there was overall no clinical difference between the 2 groups (milled and bonded) of CAD-CAM complete removable dental prostheses.


Assuntos
Planejamento de Dentadura , Boca Edêntula , Humanos , Planejamento de Dentadura/métodos , Desenho Assistido por Computador , Prótese Total , Registro da Relação Maxilomandibular
15.
Beijing Da Xue Xue Bao Yi Xue Ban ; 55(1): 101-107, 2023 Feb 18.
Artigo em Zh | MEDLINE | ID: mdl-36718696

RESUMO

OBJECTIVE: To verify the consistency between the digital manufacturing simple intraoral Gothic arch-tracing device and the traditional intraoral Gothic arch-tracing device in determining the centric relation of complete dentures restoration. METHODS: Ten outpatients with edentulous jaws were selec-ted, and the centric relation of the patients was determined by digital manufacturing of simple intraoral Gothic arch-tracing device (T1) and traditional intraoral Gothic arch-tracing device (T2); the difference of clinical operation time between the two methods was recorded; the upper and lower edentulous jaw plaster models were scanned with two kinds of centric relation, the Standard Triangle Language (STL) files imported into Geomagic studio software to apply the best fitting of multiple points of the both upper jaw models, the fitted STL files imported into the 3 shape viewer software, and the maximum position deviations of the vertical, labial (buccal) and lingual directions of the mandibular midline area and molar areas in T1 and T2 groups measured. During the clinical complete dentures try-in, we observed whether there was midline deviation in the mouth of T1 group and T2 group, and whether the occlusion of posterior teeth was stable or not. RESULTS: The mean time spent on determining the centric relation of T1 and T2 groups was (41.90±2.64) min, (57.50±2.37) min respectively. Paired t test was conducted in the two groups, P < 0.01 with significant statistical difference; The mean maximum position deviation between T1 group and T2 group of the midline mandibular region in labial lingual direction was (0.32±0.14) mm, that was (0.40±0.23) mm in vertical direction; the mean maximum position deviation of molar area in buccal lingual direction was (0.35±0.23) mm and that was (0.33±0.20) mm in vertical direction. In the vertical and horizontal directions, the maximum position deviation of mandibles between group T1 and group T2 was controlled within 0.5 mm. In the process of clinical complete dentures try-in, there was no deviation from the center line of dentures. There was not warping, swinging and other poor stability phenomena in T1 and T2 groups. CONCLUSION: The digital manufacturing of simple intraoral Gothic arch-tracing device can be used to determine the centric relation of complete dentures, which can not only save time of clinical operation, but also ensure the accuracy of the centric relation.


Assuntos
Arcada Edêntula , Boca Edêntula , Humanos , Relação Central , Registro da Relação Maxilomandibular/métodos , Prótese Total
16.
J Prosthodont ; 32(1): 10-17, 2023 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-35344633

RESUMO

The ever-expanding world of digital technology has produced many changes, including the availability of virtual articulators. The use of such digital technology requires an understanding of the features that have been available with different mechanical articulators. These features include such items as facebow, intercondylar distance, incisal guide table, condylar inclination, reference plane, lateral condylar inclination, immediate mandibular translation, and ability to verify a centric relation record. This paper reviews the adjustable features that have been available with different types of mechanical articulators so that clinicians can determine if these features should be included in the virtual articulators they choose to use. Regardless of whether one is utilizing a mechanical or virtual articulator, the rationale for which type of articulator to select is the same and is predicated on the needs of the patient, the occlusal philosophy of the clinician, and the required accuracy.


Assuntos
Articuladores Dentários , Dente , Humanos , Mandíbula , Relação Central , Registro da Relação Maxilomandibular
17.
J Prosthodont ; 32(6): 482-488, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-36074517

RESUMO

PURPOSE: Centric relation (CR) is a universally recognized term and an acceptable reference position with a long history of success. The problem is that there is little consensus as to its definition or the method of recording it, and this has created an uprising to abolish it. METHODS: A review of pertinent literature related to its definition, method of recording, anatomic considerations, and long-standing principles was conducted. RESULTS: Centric relation is an established term but there are valid concerns over its definition and method of recording. There is consensus on using it as a restorative position in a patient in need of full-arch reconstruction, and there is no substantive clinical research to contradict this. If a clinician decides to use a different position, it should have a different name. CONCLUSIONS: Centric relation is a reproducible reference position that can be utilized for diagnostic and restorative dental procedures with substantial scientific evidence to support that premise. There are numerous well-documented techniques, all of which are intermaxillary, that can replicate the position. There is little scientific evidence to support a premise as to where the exact position of the condyle should be in relation to the fossa.


Assuntos
Oclusão Dentária Central , Côndilo Mandibular , Humanos , Relação Central , Consenso , Registro da Relação Maxilomandibular/métodos
18.
J Prosthodont ; 32(5): 439-444, 2023 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-35907256

RESUMO

PURPOSE: To compare the accuracy of occlusal wear facet morphology designed using different bite registration methods for mandibular first molar crowns. MATERIALS AND METHODS: The posterior teeth and intraoral intercuspal occlusions of 12 participants were scanned. The abutment shape of the mandibular first molars for complete crowns was virtually designed, and the anatomic coping design method was used to design crowns. In the anatomic coping design, digital wax patterns were constructed by elevating the wear facets on the original surface of the first molars and then adjusting the facets with 2 types of virtual occlusions determined by buccal bite registration (BBR) or segmented tooth registration (STR) methods, where the displacement of teeth under bite force was considered (STR) or not (BBR). The occlusal distance between the original wear facets and the antagonists as well as 3D deviations between the facets on the designed crowns and on the surfaces of the original teeth were measured. Paired-samples t-test was used to analyze the results (α = 0.05). RESULTS: Regarding occlusal distance, the mean 3D deviation and the root mean square (RMS) values of BBR were greater than those of the STR groups (p < 0.001 and p = 0.008). The mean 3D deviations of the crowns of the BBR and STR groups were 0.19 ±0.04 mm and 0.14 ±0.06 mm, respectively and the RMS values were 0.22 ±0.03 mm and 0.18 ±0.04 mm (p < 0.001), respectively. CONCLUSIONS: The morphology of occlusal wear facets of mandibular first molar crowns designed with the occlusion constructed using the segmented tooth registration method are more coincident with the original morphology.


Assuntos
Atrito Dentário , Humanos , Coroa do Dente , Coroas , Dente Molar , Registro da Relação Maxilomandibular
19.
J Prosthodont ; 32(6): 497-504, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-36573906

RESUMO

PURPOSE: To assess the reproducibility of four different centric relation (CR) recording techniques, and time spent performing each technique in edentulous individuals. MATERIALS AND METHODS: Four techniques were assessed: extraoral gothic arch (EOGA) tracing, intraoral gothic arch (IOGA) tracing, deglutition (D), and frontal manipulation with tongue elevation (FMTE). Twelve subjects participated in the study; four technique records were performed on each volunteer by the same operator. Each record was repeated three times, in the same period of the day, with a 30 min interval between each technique. The reproducibility of each technique was assessed by the tri-dimensional displacement of the position of the condylar housing (mandible condyle) to the wall of the condylar guide (glenoid cavity) in the semi-adjustable articulator (anteroposterior, mediolateral, and superior-inferior). The time spent on each technique was timed in seconds (from the beginning of each technique until the wax occlusion fixation). The analysis of variance (ANOVA) and the Tukey test were performed for anteroposterior displacement (two-way) and for time spent on CT recording techniques (one-way) (α < 0.05). Regarding mediolateral and superior-inferior displacements, the nonparametric Kruskal-Wallis was performed for the comparison between recording methods, whereas the Mann-Whitney test was performed for the comparison between sides (α < 0.05). RESULTS: The factor recording technique interfered with the anteroposterior displacement (ANOVA: α < 0.001; F = 11.396). The technique D (right side: 3.78 ± 0.69 mm; left side: 3.45 ± 0.74 mm) showed a statistically significant difference compared to the other techniques (EOGA: right side: 3.00 ± 0.00 mm; left side: 3.00 ± 0.00 mm; FMTE: right side: 2.81 ± 0.52 mm; left side: 2.82 ± 0.79 mm; IOGA: right side: 2.90 ± 0.65 mm; left side: 3.12 ± 0.44 mm). The time spent on the recording technique influenced the results (ANOVA: α < 0.001; F = 21.118). The IOGA (340.40 ± 163.41 s) and EOGA (285.93 ± 133.84 s) required more time compared to the D (86.00 ± 34.33 s) and FMTE (101.33 ± 36.72 s) techniques. CONCLUSION: Graphic recordings showed better reproducibility and accuracy of the position of the centric relation.


Assuntos
Boca Edêntula , Humanos , Relação Central , Registro da Relação Maxilomandibular/métodos , Reprodutibilidade dos Testes , Estudos Transversais , Côndilo Mandibular
20.
J Contemp Dent Pract ; 24(12): 936-939, 2023 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-38317389

RESUMO

AIM: The aim of the current study was to evaluate the dimensional accuracy of three various interocclusal recording materials. MATERIALS AND METHODS: A total of 90 disc-shaped samples were prepared using polyether paste, wax, and polyvinyl siloxane material with the support of stainless steel die. For the purposes of this investigation, three frequently utilized interocclusal recording materials were chosen, and 30 samples from each material were prepared. Group I: Bite registration using polyether paste; Group II: Bite registration using wax; Group III: Bite registration using polyvinyl siloxane material. No samples were exposed to direct sunlight during storage and were kept at room temperature. Using a 10x universal measuring microscope, each sample disc was examined for the presence of horizontal and vertical lines inscripted in the die. For each of the samples, readings were taken at different time periods of 24, 48, and 72 hours. RESULTS: After 24 hours, the less dimensional changes were found in polyether paste group (0.11 ± 0.07) followed by polyvinyl siloxane material group (0.19 ± 0.04) and wax group (0.25 ± 0.12). After 48 hours, the less dimensional changes were found in polyether paste group (0.34 ± 0.02) followed by polyvinyl siloxane material group (0.42 ± 0.01) and wax group (0.94 ± 0.12). After 72 hours, the least dimensional changes were found in polyether paste group (0.46 ± 0.14) followed by polyvinyl siloxane material group (0.92 ± 0.03) and wax group (1.14 ± 0.09). CONCLUSION: The present study concluded that both the material and time factors had an impact on dimensional stability. The most dimensionally stable group was the polyether paste group, which was followed by the polyvinyl siloxane and wax material groups. CLINICAL SIGNIFICANCE: Interocclusal recording material records the occlusal connection between real or artificial teeth for occlusal rehabilitation planning and for creating removable and fixed dentures. The creation of a clinically acceptable prosthesis is dependent upon the accuracy of the patient's diagnostic or working casts and the interocclusal record. How to cite this article: Sonkesriya S, Subramanian D, Saha P, et al. In Vitro Assessment of Dimensional Accuracy of Three Different Types of Interocclusal Recording Materials. J Contemp Dent Pract 2023;24(12):936-939.


Assuntos
Materiais para Moldagem Odontológica , Siloxanas , Humanos , Registro da Relação Maxilomandibular/métodos , Polivinil
SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa