Effect of membrane properties on the odor emanating from training aids for explosive-detecting canines.

Canines are widely used for real-time detection of explosives and have proven to be on par with instrumental methods. Canines are thought to rely largely upon detection of volatile chemical constituents of the explosives, though not necessarily the explosive itself. Hence, it is crucial to understand the odor available to them as generated by training aids. Previous studies have established that the Training Aid Delivery Device (TADD) developed by SciK9 is a reliable training aid that reduces cross-contamination and doubles as a storage device. A TADD comprises a standardized container, a synthetic membrane, a membrane holder, and a lid. In the work presented, activated charcoal strips were placed above and below the TADD membrane to determine the relative amounts of volatiles emitted by dynamite (i.e., ethylene glycol dinitrate (EGDN) and trinitroglycerin (NG)). The strips were eluted and the extracts tested using gas chromatography-mass spectrometry in negative ion chemical ionization mode. A series of t-tests at 95% confidence level were performed to determine any differences in vapor composition above and below the membranes. Nine synthetic membranes and six glass fiber membranes were tested in this study. It was expected that the relative concentration of volatiles would remain the same on both sides of the membrane; however, selective removal of nitroglycerin by some membranes was observed. Synthetic membranes with larger pore sizes showed no alteration in the vapor composition. Both synthetic and glass fiber membranes did not show a significant change in relative concentration of the other volatile compound in dynamite, i.e., EGDN. Out of all the membranes tested, three synthetic membranes and four glass fiber membranes showed selective alteration in odor availability of nitroglycerin in dynamite. For training purposes, membranes that do not alter the vapor composition should be used in the training aid.

Powders to Thin Films: Advances in Conjugated Microporous Polymer Chemical Sensors.

Chemical sensing of harmful species released either from natural or anthropogenic activities is critical to ensuring human safety and health. Over the last decade, conjugated microporous polymers (CMPs) have been proven to be potential sensor materials with the possibility of realizing sensing devices for practical applications. CMPs found to be unique among other porous materials such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) due to their high chemical/thermal stability, high surface area, microporosity, efficient host-guest interactions with the analyte, efficient exciton migration along the π-conjugated chains, and tailorable structure to target specific analytes. Several CMP-based optical, electrochemical, colorimetric, and ratiometric sensors with excellent selectivity and sensing performance were reported. This review comprehensively discusses the advances in CMP chemical sensors (powders and thin films) in the detection of nitroaromatic explosives, chemical warfare agents, anions, metal ions, biomolecules, iodine, and volatile organic compounds (VOCs), with simultaneous delineation of design strategy principles guiding the selectivity and sensitivity of CMP. Preceding this, various photophysical mechanisms responsible for chemical sensing are discussed in detail for convenience. Finally, future challenges to be addressed in the field of CMP chemical sensors are discussed.

Microecological characteristics of water bodies/sediments and microbial remediation strategies after 50 years of pollution exposure in ammunition destruction sites in China.

The effects of long-term ammunition pollution on microecological characteristics were analyzed to formulate microbial remediation strategies. Specifically, the response of enzyme systems, N/O stable isotopes, ion networks, and microbial community structure/function levels were analyzed in long-term (50 years) ammunition-contaminated water/sediments from a contamination site, and a compound bacterial agent capable of efficiently degrading trinitrotoluene (TNT) while tolerating many heavy metals was selected to remediate the ammunition-contaminated soil. The basic physical and chemical properties of the water/sediment (pH (up: 0.57-0.64), nitrate (up: 1.31-4.28 times), nitrite (up: 1.51-5.03 times), and ammonium (up: 7.06-70.93 times)) were changed significantly, and the significant differences in stable isotope ratios of N and O (nitrate nitrogen) confirmed the degradability of TNT by indigenous microorganisms exposed to long-term pollution. Heavy metals, such as Pb, Zn, Cu, Cd, Cs, and Sb, have synergistic toxic effects in ammunition-contaminated sites, and significantly decreased the microbial diversity and richness in the core pollution area. However, long-term exposure in the edge pollution area induced microorganisms to use TNT as a carbon and nitrogen sources for life activities and growth and development. The Bacteroidales microbial group was significantly inhibited by ammunition contamination, whereas microorganisms such as Proteobacteria, Acidobacteriota, and Comamonadaceae gradually adapted to this environmental stress by regulating their development and stress responses. Ammunition pollution significantly affected DNA replication and gene regulation in the microecological genetic networks and increased the risk to human health. Mg and K were significantly involved in the internal mechanism of microbial transport, enrichment, and metabolism of TNT. Nine strains of TNT-utilizing microbes were screened for efficient TNT degradation and tolerance to typical heavy metals (copper, zinc and lead) found in contaminated sites, and a compound bacterial agent prepared for effective repair of ammunition-contaminated soil significantly improved the soil ecological environment.

Quantitative analysis of CL-20 explosive by smartphone-based chemiluminescence method.

A new smartphone-based chemiluminescence method has been introduced for the quantitative analysis of CL-20 (Hexanitroazaisowuertzitan) explosive. The solvent mixture, oxidizer agent, and concentration of the reactants were optimized using statistical procedures. CL-20 explosive showed a quenching effect on the chemiluminescence intensity of the luminol-NaClO reaction in the solvent mixture of DMSO/H2O. A smartphone was used as a detector to record the light intensity of chemiluminescence reaction as a video file. The recorded video file was converted to an analytical signal as intensity luminescence-time curve by a written code in MATLAB software. Dynamic range and limit of detection of the proposed method were obtained 2.0-240.0 and 1.1 mg⋅L-1, respectively, in optimized concentrations 1.5 × 10-3 mol⋅L-1 luminol and 1.0 × 10-2 mol⋅L-1 NaClO. Precursors TADB, HBIW, and TADNIW in CL-20 explosive synthesis did not show interference in measurement the CL-20 purity. The analysis of CL-20 spiked samples of soil and water indicated the satisfactory ability of the method in the analysis of real samples. The interaction of CL-20 molecules and OCl- ions is due to quench of chemiluminescence reaction of the luminol-NaClO.

A Benzil- and BODIPY-Based Turn-On Fluorescent Probe for Detection of Hydrogen Peroxide.

Faced with rising threats of terrorism, environmental and health risks, achieving sensitive and selective detection of peroxide-based explosives (PEs) has become a global focus. In this study, a turn-on fluorescent probe (BOD) based on benzil (H2O2-recognition element) and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) derivative (fluorophore) was developed to sensitively and specifically detect hydrogen peroxide (H2O2). The synthesized BOD had a very weak fluorescence due to intramolecular donor-excited photo-induced electron transfer (d-PET) effect; however, it could emit a strong fluorescence since H2O2 selectively oxidized the benzil moiety and released free BODIPY fluorophore (BOD-COOH). As a result, the proposed BOD detected H2O2 in linear detection ranged from 25 to 125 µM with a detection limit of 4.41 µM. Meanwhile, the proposed BOD showed good selectivity toward H2O2, which is not affected by other common reactive oxygen species (ROS) and ions from explosive residues. In addition, a blue shift from 508 to 498 nm was observed in the absorption spectra upon addition of H2O2. More importantly, the BOD was successfully applied for rapid detection of H2O2 vapor with good sensitivity (down to 7 ppb), which holds great potential for practical use in public safety, forensic analysis and environmental monitoring.

In-situ comparison of high-order detonations and low-order deflagration methodologies for underwater unexploded ordnance (UXO) disposal.

The unexploded ordnance (UXO) on the seabed off Northwest Europe poses a hazard to offshore developments such as windfarms. The traditional removal method is through high-order detonation of a donor explosive charge placed adjacent to the UXO, which poses a risk of injury or death to marine mammals and other fauna from the high sound levels produced and is destructive to the seabed. This paper describes a sea-trial in the Danish Great Belt to compare the sound produced by high-order detonations with that produced by deflagration, a low-order disposal method that offers reduced environmental impact from noise. The results demonstrate a substantial reduction over high-order detonation, with the peak sound pressure level and sound exposure level being around 20 dB lower for the deflagration. The damage to the seabed was also considerably reduced for deflagration, although there was some evidence for residues of explosives related chemicals in sediments.

Modeling and simulation on spontaneous detonation of ammonium nitrate explosive induced by sulfide ores.

In this work, the characteristics of the exothermic reaction between ammonium nitrate and sulfide ores were explored using COMSOL Multiphysics. This reaction can cause an increase in temperature within the blast holes of sulfide mines and can potentially induce premature explosions of the explosives. Initially, simulations were conducted to observe temperature variations in blast holes before and after the loading of explosives. Then, the impact of blast hole diameter and initial temperature on the thermal environment was assessed. Subsequent analysis focused on the fluid field's dynamics, examining flow rate changes and the concentration of signature gases produced by the reaction. Additionally, the influence of blast hole diameter on these parameters was evaluated. The results show that the blast hole temperature is positively related to its diameter and initial temperature. When the diameter of the blast hole is 120 mm and 165 mm, a significant change in flow rate is observed, with a trend of being rapidly increased and then rapidly decreased. The production of NH3 is always found to be greater than that of the other two gases. As for NO and SO2, their production is characterized by an approximate ratio of 1:2. The numerical simulation results can provide important theoretical guidance for the spontaneous detonation of blast hole in sulfide mines.

A study into the natural occurrence of inorganic ions relevant to forensic explosives investigations on human hands.

The natural occurrence of 16 inorganic ions relevant to forensic explosives investigations on human hands was studied to support the evaluation of activity-level propositions when such traces are found on the hands or in the fingerprints of a suspect. A total of 594 hand swab extracts from 297 participants throughout Europe and the United States of America were analyzed using Ion Chromatography - Mass Spectrometry. The data provides a reference framework for future covert investigations and forensic casework. The results indicate that thiocyanate, chlorate, nitrite, lithium, strontium, and barium are rarely detected on the hands of individuals who have had no direct contact with explosives (P<0.03) and in quantities below 6 µg. Perchlorate contamination sporadically occurs without deliberately handling perchlorates (P=0.03), albeit at low levels (<12 µg). It also seems that the presence of perchlorate on hands is generally related to professions that involve explosives. Detecting substantial amounts of any of these rare ions on a suspect's hands would require a specific explanation. Because legitimate activities exist that can also result in elevated levels of ions of interest on hands, the context surrounding their presence has to be carefully assessed for each individual case.

Differences in external load among indoor and beach volleyball players during elite matches.

The aim of this cross-sectional study was to examine relationships of external load variables between beach and indoor volleyball amongst individual positions on the team. The movements of eight beach and fourteen indoor female volleyball players were recorded during elite playoff matches; in total, 2,336 three-dimensional trajectories were analyzed. Time-outs and intervals between rallies or sets were excluded from active play time. In both beach and indoor volleyball, 80% of rallies lasted up to 10 s, and players covered 4.5 to 10 m of court during 60% of rally play. Differences in dependent variables of external load were found between independent variables of sports and player positions (p < 0.05). The distance covered in beach volleyball rallies and Player Load™ parameters was significantly higher by up to 23%. The unstable court surface with sand in beach volleyball elevated explosive Player Load™ (accelerations in all three orthogonal planes of motion higher than 3.5 m/s3) in beach volleyball players compared to those of players on stable flooring in indoor. While beach volleyball blocker and defender positions showed no significant difference in parameters between each other, they differed in all parameters when compared to player positions in indoor volleyball. Indoor blocker and libero reached higher loads than setter, outside and opposite positions in various parameters. Factors that influence external load include the larger relative court areas covered by each player in beach volleyball, complexity of players' roles, and game strategy. This data adds to the knowledge of elite match demands in female volleyball. Specified agility-drill distances and times are essential for training optimization and must be supported by scientific observation. Researchers, coaches, and conditioning specialists should find this helpful for achieving a higher degree of training regulation.

Colloidal Quantum Dots for Explosive Detection: Trends and Perspectives.

Sensitive, accurate, and reliable detection of explosives has become one of the major needs for international security and environmental protection. Colloidal quantum dots, because of their unique chemical, optical, and electrical properties, as well as easy synthesis route and functionalization, have demonstrated high potential to meet the requirements for the development of suitable sensors, boosting the research in the field of explosive detection. Here, we critically review the most relevant research works, highlighting three different mechanisms for explosive detection based on colloidal quantum dots, namely photoluminescence, electrochemical, and chemoresistive sensing. We provide a comprehensive overview and an extensive discussion and comparison in terms of the most relevant sensor parameters. We highlight advantages, limitations, and challenges of quantum dot-based explosive sensors and outline future research directions for the advancement of knowledge in this surging research field.

Canine detection of explosives under adverse environmental conditions with and without acclimation training.

Canines are one of the best biological detectors of energetic materials available; however, canine detection of explosives is impacted by a number of factors, including environmental conditions. The objectives of this study were: 1) determine how canine detection limits vary when both the canine and odorant are tested in varying temperature and humidity conditions (canine and odor interactive effects); and 2) determine if an acclimatization plan can improve detection limits in an adverse environmental condition. Eight working line canines were trained to detect four energetics: prill ammonium nitrate (AN), Composition 4 (C4), trinitrotoluene (TNT) and double base smokeless powder (SP). In Experiment 1, canines completed a 3-alternative forced choice 3-down-1-up staircase threshold assessment in five environmental conditions: 40°C and 70% relative humidity (RH), 40°C and 40% RH, 0°C and 90% RH, 0°C and 50% RH and 21°C and 50% RH. Canines showed a 3.5-fold detection limit increase (poorer detection) for C4 in 40°C and 70% RH compared to their detection limit at 21°C and 50% RH. In Experiment 2, the eight canines were split into two groups (n = 4), control and acclimation groups. The control group completed the threshold assessment for C4 at 21°C and 50% RH each day for 20 days, with 5 minutes of petting prior to testing. The acclimation group completed the same assessment daily starting at 21°C and 50% RH but temperature and RH were incremented daily over the course of 6 days to the 40°C and 70% RH condition. After the initial six days, the acclimation group completed daily assessments at 40°C and 70% RH condition for the remainder of the experiment. All acclimatization group canines started their session with 5 minutes of toy or food retrieves. Detection limits for C4 for all dogs were tested in 40°C and 70% RH on day 11 and day 22. The acclimatization plan improved detection limits in the 40°C and 70% RH condition for C4 compared to the non-acclimated group. In this set of experiments, canine detection limits for four explosive odorants were found to vary based on environmental condition and were mostly driven by impacts on the canine rather than odor availability. The acclimatization plan did result in lower detection limits (i.e., increased performance). Future work should determine what factor (exercise or environmental exposure) is more effective in acclimatization for odor detection work.

Movement of TNT and RDX from composition B detonation residues in solution and sediment during runoff.

Energetics used in military exercises can potentially contaminate ground and surface waters. This study was conducted to evaluate the movement of Composition B, a formulation that includes TNT (2,4,6-trinitrotoluene), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), and HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), in runoff. Mechanisms of transport we examined include movement of energetics dissolved in runoff, as particles and adsorbed to suspended sediment, and in infiltration. Rainfall simulations were conducted under controlled conditions with two rainfall rates (approximately 30 and 50 mm h-1), two soils with different infiltration capacities, and four energetic particle sizes (4.75-9.51 mm, 2.83-4.75 mm, 2-2.83 mm, and <2 mm). Particles remaining on the soil surface after rainfall were measured as well as energetics dissolved in runoff, in suspended sediment, and in infiltration. Greater concentrations of TNT than RDX and HMX were found dissolved in runoff due to its higher solubility and dissolution rates. We also found that particle transport in runoff increased with decrease in particle size. Smaller particle sizes also led to greater transport dissolved in solution. Relationships were found relating runoff and sediment yield to the transport of RDX and TNT. The results of this study allow improved prediction of Composition B transport in runoff and therefore its contamination potential.

Physical properties of odorants affect behavior of trained detection dogs during close-quarters searches.

Trained detection dogs have a unique ability to find the sources of target odors in complex fluid environments. How dogs derive information about the source of an odor from an odor plume comprised of odorants with different physical properties, such as diffusivity, is currently unknown. Two volatile chemicals associated with explosive detection, ammonia (NH3, derived from ammonium nitrate-based explosives) and 2-ethyl-1-hexanol (2E1H, associated with composition C4 plastic explosives) were used to ascertain the effects of the physical properties of odorants on the search behavior and motion of trained dogs. NH3 has a diffusivity 3.6 times that of 2E1H. Fourteen civilian detection dogs were recruited to train on each target odorant using controlled odor mimic permeation systems as training aids over 6 weeks and then tested in a controlled-environment search trial where behavior, motion, and search success were analyzed. Our results indicate the target-odorant influences search motion and time spent in the stages of searching, with dogs spending more time in larger areas while localizing NH3. This aligns with the greater diffusivity of NH3 driving diffusion-dominated odor transport when dogs are close to the odor source in contrast to the advection-driven transport of 2E1H at the same distances.

Explosive weld joint characteristics of Copper-Tantalum via simulation.

This report aims to examine the effects of impact velocity, impact depth, and impact orientation on the Cu-Ta weld joint of the explosive welding process via MD simulation. The findings indicate that the residual shear stress in the welded block mostly increases as the impact velocity rises. The bottom Ta block is more severely distorted than the higher Cu block due to the impact direction. During the tensile test, three stress zones can be identified including the low-stress Cu block, the high-stress Ta block, and the medium-stress weld joint in the middle of the samples. The weld joint position is lower than the median line of the welded block. The Cu-Ta welded block with 500 m/s impact velocities had the highest ultimate tensile strength (UTS) value of 6.49 GPa. With increasing impact depth, the atomic strain level, residual shear stress, and weld joint dimensions all noticeably increase. The Cu-Ta welded block with an impact depth of 7.5 Å has the greatest UTS values, measuring 11.65 GPa, because of its well-crystal structure. Changing the impact orientation does not result in a dramatic change in atomic strain. Orientation (001) vs (001) has the highest strain and stress rates. With an impact orientation of (110) vs. (111), the Cu-Ta welded block gets the highest UTS value of 8.03 GPa compared to other orientations.

Towards maintaining canine training aid integrity: Effects of environmental factors and operational use on the triacetone triperoxide polymer odor capture-and-release system.

There are many factors that may affect the longevity of or guide the use of canine training aids. Literature to date has mainly focused on identifying the headspace volatiles associated with training aids or odors and only minimal research exists into how different variables may alter those volatiles. The current study examines several factors affecting canine training aids: humidity, air flow, transportation, and operational deployment, using the triacetone triperoxide polymer odor capture-and-release canine training aid (TATP POCR) as the target. The TATP POCR is an absorption-based canine training aid developed to be used to safely train canines to detect the odor of the explosive TATP in operational settings. Comparisons of the TATP POCR to neat TATP are made throughout the manuscript. First, humidity increased the background components of the POCR matrix, as well as the amount of TATP recovered was above the POCR. Humidity thus affected the amount of TATP detected but did not prevent detection. Second, air flow lessened the lifetime of the TATP POCR. Third, the practice of using primary and secondary containment successfully prevented contamination, cross-contamination, and significant target loss, thereby maintaining kit integrity. Finally, the absorption of background odors from training environments was not observed. TATP headspace concentrations between a Deployed and Control POCR kit were not significantly different at time 0 (i.e., upon opening), which suggests that the operational use does not affect the function of the TATP POCR system. This information provides pivotal evidence for explosives detection canine handlers or trainers who utilize the TATP POCR.

Developing a novel ultraselective and ultrasensitive label-free direct spectrofluorimetric nanobiosensor for direct highly fast field detection of explosive triacetone triperoxide.

BACKGROUND: Direct detection of the notorious explosive triacetone triperoxide (TATP) is very difficult because it lacks facile ionization and UV absorbance or fluorescence. Besides, the current indirect methods are time-consuming and need a pre-step for TATP cleavage to hydrogen peroxide. Moreover, they commonly show significant false-positive results in the presence of some camouflage which limits their field applications. Herein, for the first time, a novel label-free field-applicable spectrofluorimetric nanobiosensor was developed for direct TATP detection using a novel activated-protein protected gold nanocluster (ABSA-AuNCs; QY = 28.3 %) synthesized by a combined protein-assisted-ultrasonication procedure. RESULTS: The ABSA-AuNCs revealed a fluorescence spectrum centered at 330.0 nm which was significantly quenched by TATP (binding constant = 154.06 M-1; ΔG = -12.5 kJ mol-1; E(%) = 88.5 %). This phenomenon was used as a basis for direct TATP quantification, providing a working range of 0.01-40.0 mg L-1 and a detection limit of 6.7 µg L-1 which is the lowest LOD provided for TATP detection up to now. A %RSD of 0.9 % and 1.56 % was obtained for repeatability and inter-day reproducibility, respectively. The selectivity was checked against a variety of camouflages, revealing ultra-selectivity. Several synthetic samples prepared by several camouflages and real samples (clay soil and real water media) were analyzed, revealing quantitative recoveries of TATP. SIGNIFICANCE: During the production of the notorious explosive TATP, it can be discharged into water and soil. This novel method eliminated the false-positive results of traditional methods and is applicable for direct quantitative detection of camouflaged TATP and its residues in real soil and water samples in a highly short response time (2 min). The camouflaged TATP analysis is important for tracking the terrorist attacks in field conditions and analysis of soil and water can provide a first indication of the location of the production site.

Metabolic activation of 2,4,6-trinitrotoluene; a case for ROS-induced cell damage.

The explosive compound 2,4,6-trinitrotoluene (TNT) is well known as a major component of munitions. In addition to its potential carcinogenicity and mutagenicity in humans, recent reports have highlighted TNT toxicities in diverse organisms due to its occurrence in the environment. These toxic effects have been linked to the intracellular metabolism of TNT, which is generally characterised by redox cycling and the generation of noxious reactive molecules. The reactive intermediates formed, such as nitroso and hydroxylamine compounds, also interact with oxygen molecules and cellular components to cause macromolecular damage and oxidative stress. The current review aims to highlight the crucial role of TNT metabolism in mediating TNT toxicity, via increased generation of reactive oxygen species. Cellular proliferation of reactive species results in depletion of cellular antioxidant enzymes, DNA and protein adduct formation, and oxidative stress. While TNT toxicity is well known, its ability to induce oxidative stress, resulting from its reductive activation, suggests that some of its toxic effects may be caused by its reactive metabolites. Hence, further research on TNT metabolism is imperative to elucidate TNT-induced toxicities.

Electrochemical sensing at the fingertips: Wearable glove-based sensors for detection of 4-nitrophenol, picric acid and diazepam.

A wearable glove-based sensor is a portable and practical approach for onsite detection/monitoring of a variety of chemical threats. Herein, we report a flexible and sensitive wearable sensor fabricated on the nitrile glove fingertips by stencil-printing technique. The working electrodes were modified with multiwalled carbon nanotubes (MWCNTs)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) for sensitive and real-time analyses of hazardous or chemical treats, as picric acid (PA) explosive, diazepam (DZ) as drug-facilitated crimes and the emerging pollutant 4-nitrophenol (4-NP). The multi-sensing platform towards PA, 4-NP, and DZ offers the ability of in-situ qualitative and quantitative analyses of powder and liquid samples. A simple sampling by touching or swiping the fingertip sensor on the sample or surface under investigation using an ionic hydrogel combined with fast voltammetry measurement provides timely point-of-need analyses. The wearable glove-based sensor uses the square wave voltammetry (SWV) technique and exhibited excellent performance to detect PA, 4-NP, and DZ, resulting in limits of detection (LOD) of 0.24 µM, 0.35 µM, 0.06 µM, respectively, in a wide concentration range (from 0.5 µM to 100 µM). Also, we obtained excellent manufacturing reproducibility with relative standard deviations (RSD) in the range of 3.65%-4.61% using 7 different wearable devices (n = 7) and stability in the range of 4.86%-6.61% using different electrodes stored for 10 days at room temperature (n = 10), demonstrating the excellent sensor-to-sensor reproducibility and stability for reliable in-field measurements. The stretchable sensor presented great mechanical robustness, supporting up to 80 bending or stretching deformation cycles without significant voltammetric changes. Collectively, our wearable glove-based sensor may be employed for analyses of chemical contaminants of concern, such as explosives (PA), drugs (DZ), and emerging pollutants (4-NP), helping in environmental and public safety control.

El impacto de las minas antipersona en Colombia en los últimos treinta años / The impact of antipersonnel mines in Colombia in the last thirty years / O impacto das minas antipessoais na Colômbia durante os últimos trinta anos

El conflicto armado en Colombia se ha caracterizado por la presencia de grupos al margen de la ley, quienes utilizan las minas antipersona como unas de sus armas principales. El objetivo de esta investigación consistió en evaluar estadísticamente los casos relacionados con las víctimas de minas antipersona en Colombia entre 1990 y 2020. El proceso investigativo se generó a partir de los datos suministrados por la Oficina del Alto Comisionado para la Paz, y se empleó un análisis de correspondencia múltiple y distribución de frecuencia. Se encontró que el 60.5% de las estadísticas relacionadas con las minas antipersona se asocian a personal militar vinculado a las Fuerzas Militares, además que en el 19.7% de los incidentes con dichas armas la persona afectada pierde su vida, y también que el 10.2% de los casos reportados corresponden a menores de edad. Igualmente, se halló que en los departamentos de Antioquia, Meta, Nariño y Caquetá se presentaron el mayor número de hechos. Se concluye que el país debe dar su máximo esfuerzo para erradicar del territorio las minas que aún están sembradas, y trabajar junto con la Comunidad Internacional y los exguerrilleros reintegrados a la sociedad con el fin de promover un país libre de minas.

The armed conflict in Colombia has been characterized by the presence of illegal groups, who use landmines as one of their main weapons. The objective of this research was to statistically evaluate the cases related to landmine victims in Colombia between 1990 and 2020. The research process was generated from data provided by the Office of the High Commissioner for Peace, and a multiple correspondence and frequency distribution analysis was used. It was found that 60.5% of the statistics related to antipersonnel mines are associated with military personnel linked to the Armed Forces, and that in 19.7% of the incidents involving these weapons the affected person loses his or her life, and also that 10.2% of the reported cases correspond to minors. It was also found that the departments of Antioquia, Meta, Nariño and Caquetá had the highest number of incidents. It is concluded that the country must make its maximum effort to eradicate the mines that are still planted in the territory, and work together with the international community and the ex-guerrillas reintegrated into society in order to promote a mine-free country.

O conflito armado na Colômbia tem sido caracterizado pela presença de grupos armados ilegais, que utilizam minas terrestres como uma de suas principais armas. O objetivo desta pesquisa era avaliar estatisticamente os casos relacionados às vítimas de minas terrestres na Colômbia entre 1990 e 2020. O processo de pesquisa foi gerado a partir de dados fornecidos pelo Alto Comissariado para a Paz, e foi utilizada uma análise de correspondência múltipla e distribuição de freqüência. Constatou-se que 60,5% das estatísticas relacionadas às minas antipessoais estão associadas a militares ligados às Forças Armadas, e que em 19,7% dos incidentes envolvendo essas armas, a pessoa afetada perde a vida, e que 10,2% dos casos relatados correspondem a menores. Também foi constatado que os departamentos de Antioquia, Meta, Nariño e Caquetá tiveram o maior número de incidentes. Conclui-se que o país deve fazer o máximo para erradicar as minas que ainda estão plantadas no território e trabalhar junto com a comunidade internacional e os ex-guerrilheiros reintegrados à sociedade para promover um país livre de minas.