Your browser doesn't support javascript.
loading
Unraveling the Kinetics and Mechanism of Surfactant-Induced Wetting in Membrane Distillation: An In Situ Observation with Optical Coherence Tomography.
Shao, Senlin; Shi, Danting; Hu, Jiangshuai; Qing, Weihua; Li, Xianhui; Li, Xue; Ji, Bin; Yang, Zhe; Guo, Hao; Tang, Chuyang Y.
Afiliação
  • Shao S; School of Civil Engineering, Wuhan University, Wuhan 430072, PR China.
  • Shi D; School of Civil Engineering, Wuhan University, Wuhan 430072, PR China.
  • Hu J; Department of Water and Wastewater Engineering, Wuhan University of Science and Technology, Wuhan 430081, PR China.
  • Qing W; Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, New Jersey 07102, United States.
  • Li X; Key Laboratory for City Cluster Environmental Safety and Green Development of the Ministry of Education, Institute of Environmental and Ecological Engineering, Guangdong University of Technology, Guangzhou 510006, China.
  • Li X; School of Civil Engineering, Wuhan University, Wuhan 430072, PR China.
  • Ji B; Department of Water and Wastewater Engineering, Wuhan University of Science and Technology, Wuhan 430081, PR China.
  • Yang Z; Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong SAR, China.
  • Guo H; Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong SAR, China.
  • Tang CY; Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong SAR, China.
Environ Sci Technol ; 56(1): 556-563, 2022 01 04.
Article em En | MEDLINE | ID: mdl-34928146
ABSTRACT
In this study, we performed a direct contact membrane distillation and successfully demonstrated the non-invasive imaging of surfactant-induced wetting using optical coherence tomography. This method enabled us to investigate the wetting kinetics, which was found to follow a "three-region" relationship between the wetting rate and surfactant concentration the (i) nonwetted region, (ii) concentration-dependent region, and (iii) concentration-independent region at low, intermediate, and high surfactant concentrations, respectively. This wetting behavior was explained by the "autophilic effect", i.e., the wetting was caused by the transfer of surfactants from the water-vapor interface to the unwetted membrane and rendered this membrane hydrophilic, and then the wetting frontier moved forward under capillary forces. At region-(i), the surfactant concentration in the water-vapor interface (Clv) was too low to make the unwetted membrane sufficiently hydrophilic; thereby, the membrane could not be wetted. At region-(ii), due to the fast adsorption of the surfactant on the newly wetted membrane, the wetting rate was determined by the advection/diffusion of surfactants from the feed stream. Consequently, the wetting rate increased with the increases in the water flux and surfactant concentration. At region-(iii), the advection/diffusion provided excess surfactants for adsorption, and thus Clv reached its upper limit (maximum surface excess) and the wetting rate leveled off.
Assuntos
Palavras-chave

Texto completo: 1 Base de dados: MEDLINE Assunto principal: Tensoativos / Purificação da Água Idioma: En Revista: Environ Sci Technol Ano de publicação: 2022 Tipo de documento: Article

Texto completo: 1 Base de dados: MEDLINE Assunto principal: Tensoativos / Purificação da Água Idioma: En Revista: Environ Sci Technol Ano de publicação: 2022 Tipo de documento: Article