Ligand structural effects on Cu2S2 bonding and reactivity in side-on disulfido-bridged dicopper complexes.

To assess supporting ligand effects on S-S bond activation, a series of [Cu2(mu-eta2:eta2-S2)]2+ complexes supported by various beta-diketiminate or anilido-imine ligands (L) were synthesized via the reaction of Cu(I) precursors LCu(CH(3)CN) with S8. For the cases where L = beta-diketiminate, the syntheses were complicated by formation of clusters [Cu(SR)]4, where SR represents the ligand functionalized by sulfur at the central methine position. The [Cu2(mu-eta2:eta2-S2)]2+ products were characterized by X-ray crystallography and electronic absorption and resonance Raman spectroscopy. Correlations among the Cu-S, Cu-Cu, and S-S distances and the nu(S-S) values were observed and interpreted within the framework of a previously described bonding picture (Chen, P.; Fujisawa, K.; Helton, M. E.; Karlin, K. D.; Solomon, E. I. J. Am. Chem. Soc. 2003, 125, 6394). Comparison of these data to those for other relevant species revealed a remarkable degree of S-S bond activation in the compounds supported by the beta-diketiminate and anilido-imine ligands, which through strong electron donation increase backbonding from the copper ions into the S-S sigma* orbital and cause S-S bond weakening. Reactions of one of the complexes supported by an anilido-imine ligand with PPh(3) and xylyl isocyanide were explored, revealing facile transfer of sulfur to PPh(3) but only displacement of sulfur to yield a LCu(I)-CNAr (Ar = xylyl) complex with the isocyanide.

Electronic tuning of beta-diketiminate ligands with fluorinated substituents: effects on the O2-reactivity of mononuclear Cu(I) complexes.

Copper(i) complexes with the beta-diketiminate ligands HC{C(R)N(Dipp)}{C(R')N(Dipp)}(-) (Dipp = C(6)H(3)(i)Pr(2-)2,6; L(1), R = CF(3), R' = CH(3); L(2), R = R' = CF(3)) have been isolated and fully characterized. On the basis of X-ray structural comparisons with the previously reported complex LCu(CH(3)CN) (L = HC{C(CH(3))N(Dipp)}(2)(-)), the ligand environments at the copper centers in the analogous nitrile adducts with L(1) and L(2) impose similar steric demands. L(1)Cu(CH(3)CN) reacts instantaneously at low temperature with O(2) to form a thermally-unstable intermediate with an isotope-sensitive vibration at 977 cm(-1) (928 cm(-1) with (18)O(2)), in accord with the peroxo O-O stretch associated with side-on coordination for LCu(O(2)). However, L(2)Cu(CH(3)CN) is unreactive toward O(2) even at room temperature. Evaluation of the redox potentials of the nitrile adducts and the CO stretching frequencies of the carbon monoxide adducts revealed an incremental adjustment of the electronic environment at the copper center that correlated with the extent of ligand fluorination. Furthermore, theoretical calculations (DFT, CASPT2) predicted that an increasing extent of Cu(ii)-superoxo character and end-on coordination of the O(2) moiety in the Cu/O(2) product (L(2) > L(1) > L) are accompanied by increases in the free energy for the oxygenation reaction, with L(2) unable to support a Cu/O(2) intermediate. Calculations also predict the 1 : 1 Cu/O(2) adducts to be unreactive with respect to hydrogen atom abstraction from hydrocarbon substrates on the basis of their stability towards both reduction and protonation.

Effects of thioether substituents on the O2 reactivity of beta-diketiminate-Cu(I) complexes: probing the role of the methionine ligand in copper monooxygenases.

The activation of dioxygen by dopamine beta-monooxygenase (DbetaM) and peptidylglycine alpha-hydroxylating monooxygenase (PHM) is postulated to occur at a copper site ligated by two histidine imidazoles and a methionine thioether, which is unusual because such thioether ligation is not present in other O2-activating copper proteins. To assess the possible role of the thioether ligand in O2 activation by DbetaM and PHM, two new ligands comprising beta-diketiminates with thioether substituents were synthesized and Cu(I) and Cu(II) complexes were isolated. The Cu(II) compounds are monomeric and exhibit intramolecular thioether coordination. While the Cu(I) complexes exhibit a multinuclear topology in the solid state, variable-temperature 1H NMR studies implicate equilibria in solution, possibly including monomers with intramolecular thioether coordination that are structurally defined by DFT calculations. Low-temperature oxygenation of solutions of the Cu(I) complexes generates stable 1:1 Cu/O2 adducts, which on the basis of combined experimental and theoretical studies adopt side-on "eta(2)" structures with negligible Cu-thioether bonding and significant peroxo-Cu(III) character. In contrast to previously reported findings with related ligands lacking the thioether group, however (cf., Aboelella; et al. J. Am. Chem. Soc. 2004, 126, 16896), purging the solutions of the thioether-containing adducts with argon results in conversion to bis(mu-oxo)dicopper(III) species. A role for the thioether in promoting loss of O2 from the 1:1 Cu/O2 adduct and facilitating trapping of the resulting Cu(I) complex to yield the bis(mu-oxo) species is proposed, and the possible relevance of this role to that of the methionine in the active sites of DbetaM and PHM is discussed.

Reactivity of a 1:1 copper-oxygen complex: isolation of a Cu(II)-o-iminosemiquinonato species.

While a 1:1 Cu-O2 adduct is generally unreactive with organic substrates, phosphines displace O2 via an associative process and added Cu(I) leads to a novel internal ligand oxidation to yield a Cu(II)-o-iminosemiquinone complex.

Dioxygen activation at a single copper site: structure, bonding, and mechanism of formation of 1:1 Cu-O2 adducts.

To evaluate the fundamental process of O(2) activation at a single copper site that occurs in biological and catalytic systems, a detailed study of O(2) binding to Cu(I) complexes of beta-diketiminate ligands L (L(1) = backbone Me; L(2) = backbone tBu) by X-ray crystallography, X-ray absorption spectroscopy (XAS), cryogenic stopped-flow kinetics, and theoretical calculations was performed. Using synchrotron radiation, an X-ray diffraction data set for L(2)CuO(2) was acquired, which led to structural parameters in close agreement to theoretical predictions. Significant Cu(III)-peroxo character for the complex was corroborated by XAS. On the basis of stopped-flow kinetics data and theoretical calculations for the oxygenation of L(1)Cu(RCN) (R = alkyl, aryl) in THF and THF/RCN mixtures between 193 and 233 K, a dual pathway mechanism is proposed involving (a) rate-determining solvolysis of RCN by THF followed by rapid oxygenation of L(1)Cu(THF) and (b) direct, bimolecular oxygenation of L(1)Cu(RCN) via an associative process.

Mixed metal bis(mu-oxo) complexes with [CuM(mu-O)2]n+(M = Ni(III) or Pd(II)) cores.

Two highly reactive heterodinuclear bis(mu-oxo) complexes were prepared by combining mononuclear peroxo species with reduced metal precursors at -80 degrees C and were identified by UV-vis, EPR/NMR, and resonance Raman spectroscopy, with corroboration in the case of the CuPd system from density functional calculations.

A new class of (mu-eta2:eta2-disulfido)dicopper complexes: synthesis, characterization, and disulfido exchange.

Rare examples of (mu-eta2:eta2-disulfido)dicopper complexes have been prepared from Cu(I) and Cu(II) complexes of beta-diketiminate and anilido-imine supporting ligands. A novel byproduct derived from sulfur functionalization of the methine position of a beta-diketiminate ligand was identified. DFT calculations on [(LCu)2X2] (L = beta-diketiminate, X = O or S) complexes rationalize the absence of a bis(mu-sulfido)dicopper isomer, [Cu2(mu-S)2](2+), in the synthetic reactions, yet predict that a [Cu2(mu-S)2](0) core is a stable product of 2-electron reduction of the [Cu2(mu-eta2:eta2-S2)](2+) unit. Exchange of the disulfido ligand was discovered upon reaction of a (mu-eta2:eta2-disulfido)dicopper complex with a Cu(I) reagent.

Snapshots of dioxygen activation by copper: the structure of a 1:1 Cu/O(2) adduct and its use in syntheses of asymmetric Bis(mu-oxo) complexes.

The X-ray structure of a 1:1 Cu/O(2) adduct revealed side-on (eta(2)) O(2) coordination. Density functional calculations corroborated the structure, indicated a significant contribution of a Cu(III)-(O(2)(2-)) resonance form, and provided insights into the key bonding interactions. Reaction of a 1:1 adduct supported by a slightly different beta-diketiminate ligand with Cu(I) reagents resulted in the formation of novel asymmetric bis(mu-oxo) complexes that were identified by EPR, UV-vis, and Raman spectroscopy, as well as by an X-ray structure in one instance.

beta-diketiminate ligand backbone structural effects on Cu(I)/O(2) reactivity: unique copper-superoxo and bis(mu-oxo) complexes.

Copper(I) and -(II) complexes of beta-diketiminate ligands with identical flanking 2,6-diisopropylphenyl groups but divergent backbone substitution patterns were prepared and structurally characterized, and reactions of the Cu(I) species with O(2) at low temperature were explored. Despite being far removed from the coordinated metal ion, the different backbone patterns significantly influence the steric encumbrance exerted by the ligands, as revealed by differences in (a) the structural features of the Cu(I) and Cu(II) complexes and (b) the course of the oxygenation reactions of the Cu(I) compounds. With the less hindered ligand, a rare example of a neutral bis(mu-oxo)dicopper complex was identified on the basis of its diagnostic spectral features (UV-vis, resonance Raman, EPR) and the stoichiometry of O(2) uptake (Cu:O(2) = 2:1). In contrast, oxygenation of the Cu(I) complexes supported by the more hindered ligands yielded novel (superoxo)copper complexes, identified by a Cu:O(2) ratio of 1:1, a lack of an EPR signal, and O-isotope sensitive resonance Raman spectral features (nu(O)(-)(O) = 968 cm(-1), Delta(18)O(2) = 51 cm(-1)). Symmetric coordination of the superoxo ligand is proposed on the basis of Raman data acquired using (16)O(18)O (single peak at 943 cm(-1)).