Development and large volume production of extremely high current density YBa2Cu3O7 superconducting wires for fusion.

The fusion power density produced in a tokamak is proportional to its magnetic field strength to the fourth power. Second-generation high temperature superconductor (2G HTS) wires demonstrate remarkable engineering current density (averaged over the full wire), JE, at very high magnetic fields, driving progress in fusion and other applications. The key challenge for HTS wires has been to offer an acceptable combination of high and consistent superconducting performance in high magnetic fields, high volume supply, and low price. Here we report a very high and reproducible JE in practical HTS wires based on a simple YBa2Cu3O7 (YBCO) superconductor formulation with Y2O3 nanoparticles, which have been delivered in just nine months to a commercial fusion customer in the largest-volume order the HTS industry has seen to date. We demonstrate a novel YBCO superconductor formulation without the c-axis correlated nano-columnar defects that are widely believed to be prerequisite for high in-field performance. The simplicity of this new formulation allows robust and scalable manufacturing, providing, for the first time, large volumes of consistently high performance wire, and the economies of scale necessary to lower HTS wire prices to a level acceptable for fusion and ultimately for the widespread commercial adoption of HTS.

J e (4.2 K, 31.2 T) beyond 1 kA/mm2 of a ~3.2 µm thick, 20 mol% Zr-added MOCVD REBCO coated conductor.

A main challenge that significantly impedes REBa2Cu3Ox (RE = rare earth) coated conductor applications is the low engineering critical current density J e because of the low superconductor fill factor in a complicated layered structure that is crucial for REBa2Cu3Ox to carry supercurrent. Recently, we have successfully achieved engineering critical current density beyond 2.0 kA/mm2 at 4.2 K and 16 T, by growing thick REBa2Cu3Ox layer, from ∼1.0 µm up to ∼3.2 µm, as well as controlling the pinning microstructure. Such high engineering critical current density, the highest value ever observed so far, establishes the essential role of REBa2Cu3Ox coated conductors for very high field magnet applications. We attribute such excellent performance to the dense c-axis self-assembled BaZrO3 nanorods, the elimination of large misoriented grains, and the suppression of big second phase particles in this ~3.2 µm thick REBa2Cu3Ox film.

A Feasibility Study of High-Strength Bi-2223 Conductor for High-Field Solenoids.

We performed a feasibility study on a high-strength Bi2-x Pb x Sr2Ca2Cu3O10-x (Bi-2223) tape conductor for high-field solenoid applications. The investigated conductor, DI-BSCCO Type HT-XX, is a pre-production version of Type HT-NX, which has recently become available from Sumitomo Electric Industries (SEI). It is based on their DI-BSCCO Type H tape, but laminated with a high-strength Ni-alloy. We used stress-strain characterizations, single- and double-bend tests, easy- and hard-way bent coil-turns at various radii, straight and helical samples in up to 31.2 T background field, and small 20-turn coils in up to 17 T background field to systematically determine the electro-mechanical limits in magnet-relevant conditions. In longitudinal tensile tests at 77 K, we found critical stress- and strain-levels of 516 MPa and 0.57%, respectively. In three decidedly different experiments we detected an amplification of the allowable strain with a combination of pure bending and Lorentz loading to ≥ 0.92% (calculated elastically at the outer tape edge). This significant strain level, and the fact that it is multi-filamentary conductor and available in the reacted and insulated state, makes DI-BSCCO HT-NX highly suitable for very high-field solenoids, for which high current densities and therefore high loads are required to retain manageable magnet dimensions.

Comparison of growth texture in round Bi2212 and flat Bi2223 wires and its relation to high critical current density development.

Why Bi(2)Sr(2)CaCu(2)Ox (Bi2212) allows high critical current density Jc in round wires rather than only in the anisotropic tape form demanded by all other high temperature superconductors is important for future magnet applications. Here we compare the local texture of state-of-the-art Bi2212 and Bi2223 ((Bi,Pb)(2)Sr(2)Ca(2)Cu(3)O(10)), finding that round wire Bi2212 generates a dominant a-axis growth texture that also enforces a local biaxial texture (FWHM <15°) while simultaneously allowing the c-axes of its polycrystals to rotate azimuthally along and about the filament axis so as to generate macroscopically isotropic behavior. By contrast Bi2223 shows only a uniaxial (FWHM <15°) c-axis texture perpendicular to the tape plane without any in-plane texture. Consistent with these observations, a marked, field-increasing, field-decreasing J(c)(H) hysteresis characteristic of weak-linked systems appears in Bi2223 but is absent in Bi2212 round wire. Growth-induced texture on cooling from the melt step of the Bi2212 J(c) optimization process appears to be the key step in generating this highly desirable microstructure.

Template engineering of Co-doped BaFe2As2 single-crystal thin films.

Understanding new superconductors requires high-quality epitaxial thin films to explore intrinsic electromagnetic properties and evaluate device applications. So far, superconducting properties of ferropnictide thin films seem compromised by imperfect epitaxial growth and poor connectivity of the superconducting phase. Here we report new template engineering using single-crystal intermediate layers of (001) SrTiO(3) and BaTiO(3) grown on various perovskite substrates that enables genuine epitaxial films of Co-doped BaFe(2)As(2) with a high transition temperature (T(c,rho=0) of 21.5 K, where rho=resistivity), a small transition width (DeltaT(c)=1.3 K), a superior critical current density J(c) of 4.5 MA cm(-2) (4.2 K) and strong c-axis flux pinning. Implementing SrTiO(3) or BaTiO(3) templates to match the alkaline-earth layer in the Ba-122 with the alkaline-earth/oxygen layer in the templates opens new avenues for epitaxial growth of ferropnictides on multifunctional single-crystal substrates. Beyond superconductors, it provides a framework for growing heteroepitaxial intermetallic compounds on various substrates by matching interfacial layers between templates and thin-film overlayers.

Diversity of discrete breathers observed in a josephson ladder

We generate and observe discrete rotobreathers in Josephson junction ladders with open boundaries. Rotobreathers are localized excitations that persist under the action of a spatially uniform force. We find a rich variety of stable dynamic states including pure symmetric, pure asymmetric, and mixed states. The parameter range where the discrete breathers are observed in our experiment is limited by retrapping due to dissipation.

Observation of breathers in Josephson ladders.

We report on the observation of spatially localized excitations in a ladder of small Josephson junctions. The excitations are whirling states which persist under a spatially homogeneous force due to the bias current. These states of the ladder are visualized using a low temperature scanning laser microscopy. We also compute breather solutions with high accuracy in corresponding model equations. The stability analysis of these solutions is used to interpret the measured patterns in the I-V characteristics.