Enhanced Removal of Ultratrace Levels of Gold from Wastewater Using Sulfur-Rich Covalent Organic Frameworks.

In view of the increasing global demand and consumption of gold, there is a growing need and effort to extract gold from alternative sources besides conventional mining, e.g., from water. This drive is mainly due to the potential benefits for the economy and the environment as these sources contain large quantities of the precious metal that can be utilized. Wastewater is one of these valuable sources in which the gold concentration can be in the ppb range. However, the effective selective recovery and recycling of ultratrace amounts of this metal remain a challenge. In this article, we describe the development of a covalent imine-based organic framework with pores containing thioanisole functional groups (TTASDFPs) formed by the condensation of a triazine-based triamine and an aromatic dialdehyde. The sulfur-functionalized pores served as effective chelating agents to bind Au3+ ions, as evidenced by the uptake of more than 99% of the 9 ppm Au3+ solution within 2 min. This is relatively fast kinetics compared with other adsorbents reported for gold adsorption. TTASDFP also showed a high removal capacity of 245 mg·g-1 and a clear selectivity toward gold ions. More importantly, the material can capture gold at concentrations as low as 1 ppb.

Temperature Control of Yellow Photoluminescence from SiO2-Coated ZnO Nanocrystals.

In this study, we aimed to elucidate the effects of temperature on the photoluminescence from ZnO-SiO2 nanocomposite and to describe the preparation of SiO2-coated ZnO nanocrystals using a chemical precipitation method, as confirmed by Fourier transform infrared (FTIR) and powder X-ray diffraction analysis (XRD) techniques. Analyses using high-resolution transmission microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), and electrophoretic light scattering (ELS) techniques showed that the new nanocomposite has an average size of 70 nm and 90% silica. Diffuse reflectance spectroscopy (DRS), photoluminescence (PL), and photoluminescence-excitation (PLE) measurements at different temperatures revealed two emission bands at 385 and 590 nm when the nanomaterials were excited at 325 nm. The UV and yellow emission bands were attributed to the radiative recombination and surface defects. The variable-temperature, time-resolved photoluminescence (VT-TRPL) measurements in the presence of SiO2 revealed the increase in the exciton lifetime values and the interplay of the thermally induced nonradiative recombination transfer of the excited-state population of the yellow emission via deep centers (DC). The results pave the way for more applications in photocatalysis and biomedical technology.

Covalent Organic Framework Based on Azacalix[4]arene for the Efficient Capture of Dialysis Waste Products.

Azacalix[n]arenes (ACAs) are lesser-known cousins of calix[n]arenes that contain amine bridges instead of methylene bridges, so they generally have higher flexibility due to enlarged cavities. Herein, we report a highly substituted cationic azacalix[4]arene-based covalent organic framework (ACA-COF) synthesized by the Zincke reaction under microwave irradiation. The current work is a rare example of a synthetic strategy that utilizes the chemical functionalization of an organic macrocycle to constrain its conformational flexibility and, thereby, produce an ordered material. Considering the ACA cavity dimensions, and the density and diversity of the polar groups in ACA-COF, we used it for adsorption of uric acid and creatinine, two major waste products generated during hemodialysis treatment in patients with renal failure. This type of application, which has the potential to save ∼400 L of water per patient per week, has only been recognized in the last decade, but could effectively address the problem of water scarcity in arid areas of the world. Rapid adsorption rates (up to k = 2191 g mg-1 min-1) were observed in our COF, exceeding reported values by several orders of magnitude.

Porous Polycalix[n]arenes as Environmental Pollutant Removers.

A new and innovative class of calixarene-based polymers emerged as adsorbents for a variety of compounds and ions in solution and vapor media. These materials take advantage of the modifiable rims and hydrophobic cavities of the calixarene monomers, in addition to the porous nature of the polymeric matrix. With main-chain calixarenes' function as supramolecular hosts and the polymers' high surface areas, polycalixarenes can effectively encapsulate target analytes. This feature is particularly useful for environmental remediation as dangerous and toxic molecules reversibly bind to the macrocyclic cavity, which facilitates their removal and enables repeated use of the polymeric sorbent. This Spotlight touches on the unique characteristics of the calixarene monomers and discusses the synthetic methods of our reported calixarene-based porous polymers, including Sonogashira-Hagihara coupling, and diazo and imine bond formation. It then discusses the promising applications of these materials in adsorbing dyes, micropollutants, iodine, mercury, paraquat, and perfluorooctanoic acid (PFOA) from water. In most cases, these reports cover materials that outperform others in terms of recyclability, rates of adsorption, or uptake capacities of specific pollutants. Finally, this Spotlight addresses the current challenges and future aspects of utilizing porous polymers in pollution treatment.