Pathways in formulating foods for the elderly.

The growth of the elderly population worldwide is posing significant challenges to human society. The progressive physical and physiological changes occur with aging, including decreased appetite, incomplete digestion, and reduced absorption of nutrients. A common feature of many elderly people's diets is a deficiency in proteins (especially easily digestible ones) and micronutrients (e.g., vitamins, zinc, iron, and calcium). One of the solutions to this problem is the incorporation of these components into suitably texture-modified foods. There is a dearth of products that meet the needs of the elderly with special medical/health conditions such as dysphagia, osteoporosis, diabetes, and cardiovascular disease, as well as those who are in hospital and palliative care. Future research and development of foods for the elderly must address specific dietary needs of different subgroups of elderly people with underlying health conditions. The existence of different physical and physiological stages of the elderly means that their specific dietary requirements must be considered. This review summarizes current knowledge on nutritional requirements including those with underlying health problems and outlines the research and innovation pathways for developing new foods considering nutrition, texture, flavor, and other sensory aspects.

Physicochemical properties of active films of rose essential oil produced using soy protein isolate-polyphenol conjugates for cherry tomato preservation.

Soy protein isolate (SPI)-polyphenol conjugates were produced by grafting SPI individually with curcumin, naringenin, and catechin. The resulting conjugates showed better emulsifying properties and were used to develop active films containing rose essential oil. The effect of conjugation on the physicochemical and mechanical properties of these emulsion-based films was evaluated. The results showed that the barrier and mechanical properties of the films were improved when the SPI-polyphenol conjugates were used to emulsify the essential oil; in particular, the SPI-curcumin conjugate showed significant improvement. The improvements on the water vapor and oxygen barrier properties in the films were attributed to the formation of compact structure. Emulsion-based films stabilized by SPI-polyphenol conjugates showed antioxidant and antibacterial activities. They also demonstrated an ability to extend the shelf life of cherry tomatoes, as indicated by better preservation of weight, firmness, and ascorbic acid content.

Characteristics of Pickering emulsions stabilized by microgel particles of five different plant proteins and their application.

Pickering emulsions stabilized by protein particles are of great interest for use in real food systems. This study was to investigate the properties of microgel particles prepared from different plant proteins, i.e., soybean protein isolate (SPI), pea protein isolate (PPI), mung bean protein isolate (MPI), chia seed protein isolate (CSPI), and chickpea protein isolate (CPI). MPI protein particles had most desirable Pickering emulsion forming ability. The particles of SPI and PPI had similar particle size (316.23 nm and 294.80 nm) and surface hydrophobicity (2238.40 and 2001.13) and emulsion forming ability, while the CSPI and CPI particle stabilized emulsions had the least desirable properties. The MPI and PPI particle stabilized Pickering emulsions produced better quality ice cream than the one produced by SPI particle-stabilized emulsions. These findings provide insight into the properties of Pickering emulsions stabilized by different plant protein particles and help expand their application in emulsions and ice cream.

Mitigating quality deterioration in chilled pork by combining cinnamaldehyde nanoemulsions and a high-voltage electrostatic field.

Cinnamaldehyde nanoemulsion (CNE) was obtained through ultrasonication, using Tween 80 as an emulsifier. The CNE was then applied to chilled pork in conjunction with a high-voltage electrostatic field (HVEF) to mitigate quality deterioration during refrigerated storage. The particle size of CNE ranged from 60 to 150 nm and was positively correlated with the amount of added cinnamaldehyde. The polydispersity index and zeta potential of CNE ranged from 0.25 to 0.30 and - 12 to -11 mV, respectively, indicating a narrow size distribution and stability. The CNE released the odor specific to cinnamaldehyde to pork in the first 4 days of chilling; however, it had little effect on the taste. HVEF pretreatment reduced the initial total viable count (TVC) in pork by 1.14 log cycle. The combination of CNE with HVEF successfully slowed down the loss of moisture, decrease in pH, and accumulation of total volatile basic nitrogen in pork during refrigeration. Furthermore, it mitigated the increase in TVC of pork. Therefore, this integrated method appears to be suitable for extending the shelf life of chilled pork.

Novel strategies for enhancing quality stability of edible flower during processing using efficient physical fields: A review.

Edible flowers are an exotic part of the human diet due to their distinct sensorial properties and health benefits. Due to consumers demand edible flowers and their products with natural freshness and high nutritional value, there is increasing research on the application of green and efficient edible flower processing technologies. This paper reviews the application of a number of physical fields including ultrasound, microwave, infrared, ultraviolet, ionizing radiation, pulse electric field, high hydrostatic pressure, and reduced pressure aiming to improve the processing and product quality of edible flowers. The mechanism of action, influencing factors, and status on application of each physical energy field are critically evaluated. In addition, the advantages and disadvantages of each of these energy fields are evaluated, and trends on their future prospects are highlighted. Future research is expected to focus on gaining greater understanding of the mechanism action of physical field-based technologies when applied to processing of edible flowers and to provide the basis for broaden the application of physical field-based technologies in industrial realm.

Engineered Sustainable Omniphobic Coatings to Control Liquid Spreading on Food-Contact Materials.

The adhesion of sticky liquid foods to a contacting surface can cause many technical challenges. The food manufacturing sector is confronted with many critical issues that can be overcome with long-lasting and highly nonwettable coatings. Nanoengineered biomimetic surfaces with distinct wettability and tunable interfaces have elicited increasing interest for their potential use in addressing a broad variety of scientific and technological applications, such as antifogging, anti-icing, antifouling, antiadhesion, and anticorrosion. Although a large number of nature-inspired surfaces have emerged, food-safe nonwetted surfaces are still in their infancy, and numerous structural design aspects remain unexplored. This Review summarizes the latest scientific research regarding the key principles, fabrication methods, and applications of three important categories of nonwettable surfaces: superhydrophobic, liquid-infused slippery, and re-entrant structured surfaces. The Review is particularly focused on new insights into the antiwetting mechanisms of these nanopatterned structures and discovering efficient platform methodologies to guide their rational design when in contact with food materials. A detailed description of the current opportunities, challenges, and future scale-up possibilities of these nanoengineered surfaces in the food industry is also provided.

Fluorescent Nanocarbons: From Synthesis and Structure to Cancer Imaging and Therapy.

Nanocarbons are emerging at the forefront of nanoscience, with diverse carbon nanoforms emerging over the past two decades. Early cancer diagnosis and therapy, driven by advanced chemistry techniques, play a pivotal role in mitigating mortality rates associated with cancer. Nanocarbons, with an attractive combination of well-defined architectures, biocompatibility, and nanoscale dimension, offer an incredibly versatile platform for cancer imaging and therapy. This paper aims to review the underlying principles regarding the controllable synthesis, fluorescence origins, cellular toxicity, and surface functionalization routes of several classes of nanocarbons: carbon nanodots, nanodiamonds, carbon nanoonions, and carbon nanohorns. This review also highlights recent breakthroughs regarding the green synthesis of different nanocarbons from renewable sources. It also presents a comprehensive and unified overview of the latest cancer-related applications of nanocarbons and how they can be designed to interface with biological systems and work as cancer diagnostics and therapeutic tools. The commercial status for large-scale manufacturing of nanocarbons is also presented. Finally, it proposes future research opportunities aimed at engendering modifiable and high-performance nanocarbons for emerging applications across medical industries. This work is envisioned as a cornerstone to guide interdisciplinary teams in crafting fluorescent nanocarbons with tailored attributes that can revolutionize cancer diagnostics and therapy.

Freeze-thaw stability of Pickering emulsion stabilized by modified soy protein particles and its application in plant-based ice cream.

Pickering emulsions are of great interest to the food industry and their freeze-thaw stability important when used in frozen foods. Particles of soybean isolate (SPI) were heat treated and then crosslinked with transglutaminase (TG) enzyme to produce Pickering emulsions. The protein particles produced using unheated and uncrosslinked SPI (NSPI) was used as the benchmark. The mean particle size, absolute zeta potential, and surface hydrophobicity of protein particles produced using heat treatment and TG crosslinking (at 40 U/g) SPI (HSPI-TG-40) were the highest and substantially higher than those produced using NSPI. The thermal treatment of protein particles followed by crosslinking with TG enzyme improved the freeze-thaw stability of Pickering emulsions stabilized by them. The Pickering emulsions produced using HSPI-TG-40 had the lowest temperature for ice crystal formation and they had better freeze-thaw stability. The plant-based ice cream prepared by HSPI-TG-40 particle-stabilized Pickering emulsions had suitable texture and freeze-thaw stability compared to the ice cream produced using NSPI. The Pickering particles produced using heat treatment of SPI followed by crosslinking with TG (at 40 U/g) produced the most freeze-thaw stable Pickering emulsions. These Pickering particles and Pickering emulsions could be used in frozen foods such as ice cream.

Development, characterization, and consumer acceptance evaluation of thermally stable capsule beads containing mixed extracts of green tea and turmeric.

The aim of this study was to investigate the ability of shell (coating) formulations comprised of alginate and glucono delta lactone (GDL) to encapsulate a mixture of green tea and turmeric extracts. Three concentrations of alginate and GDL were used at 0.5%, 0.75%, and 1%, w/v and their solid ratio was varied using a factorial design. A response surface model was applied to optimize the retention of catechin and curcuminoid contents, to determine encapsulation efficiency, and to minimize undesirable flavor and taste. Increasing the concentration of alginate and GDL significantly increased the retention of catechin and curcuminoid contents, encapsulation efficiency, and consumer acceptance (p < 0.05). The encapsulating solution containing 1% of each alginate and GDL performed the best against each criterion. The thermal treatment carried out at the boiling point of water for 15 min had a significant impact on the retention of catechin and curcuminoid content which, in the thermally-treated beads, was 5.15 and 3.85 times higher than unencapsulated, respectively. The consumer acceptance of the encapsulated beads after thermal treatment was higher than that of the unencapsulated formulations as they exhibited lesser pungent flavor and bitterness. The innovative process of thermally stable microencapsulation can produce anti-cancer activity compounds involved in functional food industrial sectors.

Shiitake polysaccharides acted as a non-competitive inhibitor to α-glucosidase and inhibited glucose transport of digested starch from Caco-2 cells monolayer.

The inhibition mechanism of shitake mushroom polysaccharides (Lentinula edodes polysaccharides, LEP) against α-glucosidase was studied by enzyme kinetic assay, fluorescence quenching and molecular docking. The effect of LEP on glucose transport of digested starch was investigated via an in vitro digestion/Caco-2 transwell model. LEP exhibited a stronger inhibiting effect (IC50 = 0.66 mg/mL) than acarbose and presented a non-competitive inhibition mechanism. The interaction between LEP and α-glucosidase primarily involved electrostatic interaction and hydrogen bonding. Molecular docking modelling showed that the four structures of LEP were bound to the allosteric tunnel or adjacent pocket of α-glucosidase via electrostatic force and hydrogen bonds. The (1 â†’ 6)-linkages in LEP structures favoured its binding affinity to the α-glucosidase. The α-glucosidase inhibiting activity of LEP was also found to emanate from the reduction in glucose transport of digested starch as deducted from the in vitro digestion/Caco-2 transwell data. The release of glucose from digested starch cooked with LEP was significantly reduced (33.7%) compared to the digested starch without LEP. The findings from the current study suggest that LEP could be a promising ingredient to inhibit α-glucosidase activity as well as control the level of postprandial blood glucose when incorporated into starchy foods.

Effect of Physical Modifications on Physicochemical and Functional Properties of Walnut Protein.

Walnut protein is a high-quality vegetable protein with promising applications in the food industry; however, its potential is hindered by low solubility and associated properties. We utilized various physical modification techniques (cold plasma; ball milling; superfine grinding; ultrasound; wet ball milling; and high-pressure microjet) to enhance walnut proteins' physicochemical and functional properties. The changes in particle size, microstructure, surface hydrophobicity, fluorescence, solubility, foaming, and emulsification were investigated. Cold plasma and ultrasound treatments minimally affected particle size and morphology. Cold plasma increased the particle size D4,3 from 145.20 µm to 152.50 µm. Ultrasonication reduced the particle size D4,3 to 138.00 µm. The variation was within ±10 µm, while the particle size of walnut protein significantly decreased after the other four modification treatments. The greatest variation in particle size was in the superfine grinding, with the D4,3 being reduced to 23.80 µm. Ultrasound treatment converted the ß-sheet into an α-helix, while the other methods transformed the α-helix into a ß-sheet. The dispersion stability notably improved after wet ball milling and high-pressure microjet treatments, which was accompanied by a significant increase in solubility from 6.9% (control) to 13.6% (wet ball milling) and 31.7% (high-pressure microjet). The foaming and emulsification properties were also enhanced through these modifications (foaming improved from 47% to 55.33% and emulsification improved from 4.32 m2/g to 8.27 m2/g). High-pressure microjet treatment proved most effective at improving solubility in the functional properties of walnut protein. These findings are expected to help broaden the potential utilization of walnut protein in the food industry, including in beverages and emulsions.

Formulation and characterization of 3D printed chickpea protein isolate-mixed cereal dysphagia diet.

The feasibility study of making 3D printed dysphagia diet was undertaken. A mixture of corn flour and buckwheat flour was used as the model cereal and chickpea protein isolate (CPI) was used as the model protein. Printing gels (inks) of the mixed cereal (control) and CPI-cereal mixture were produced by heating the formulations at 95 °C for 30 min and then cooling them to room temperature. The results showed that all the ink formulations containing CPI had higher apparent viscosity, preferable shear thinning behavior and shape supporting characteristics than that of the control. The cohesiveness and shape supporting ability of 10%CPI-cereal and 20%CPI-cereal formulations were poor and could not produce stable printing shape. The 30%CPI-cereal and 40%CPI-cereal formulations had suitable apparent viscosity, shear thinning behavior, storage modulus, yield stress and printing accuracy and the 3D printed products were stable. The control ink and 10%CPI-cereal ink had low cohesion and also could not pass the spoon tilt test. The 50%CPI-cereal formulation had high hardness and also could not pass the fork pressing test. The 30 % to 40 % CPI-cereal formulations were found to be suitable as dysphagia products as they could be classified as level 5 dysphagia diet.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review.

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Stabilization of ginger essential oil Pickering emulsions by pineapple cellulose nanocrystals.

Pickering emulsions (PE) are systems made up of two incompatible fluids, these are stabilized by solid organic or inorganic particles located on their interface. Cellulose nanocrystals (CNCs) are sustainable and biocompatible value-added naturally occurring biomolecules which are being investigated as PE stabilizers in the cosmetic, food, and pharmaceutical industries. The objective of this research was to investigate the efficacy of pineapple cellulose nanocrystals as stabilizers for a ginger essential oil-in-water Pickering emulsion. Anionic pineapple cellulose nanocrystals were prepared by acid hydrolysis. Ginger essential oil-in-water emulsions were prepared by ultrasonication. Pineapple CNC produced stable Pickering emulsions with surface average droplet size of 4.3 µm-6.2 µm, high negative zeta potential, high viscosity, and high adsorption at the interface. Pickering emulsions by ultrasonication were stable against droplet coalescence, phase separation, and droplet flocculation for at least 8 weeks at 25 °C or 40 °C at various droplet sizes. The emulsion droplet size and volume density (droplet size distribution) were evaluated by varying the particle concentration (CNC 0.25 g/100 ml or 0.50 g/100 ml) and/or oil fraction (10-20 g/100 ml). At constant oil fraction, the emulsion viscosity increased as the nanocrystal concentration increased. The cellulose nanocrystal-stabilized ginger oil-Pickering emulsions exhibited shear-thinning characteristics of a pseudo-plastic fluid. Pineapple nanocellulose crystal -stabilized ginger oil-Pickering emulsions exhibited high stability with a creaming index of zero. CNC was found to be an effective Pickering stabilizer for oil-in-water emulsions in various food applications.

Advances in preparation and application of food-grade emulsion gels.

Emulsion gel is a semi-solid or solid material with a three-dimensional net structure produced from emulsion through physical, enzymatic, chemical methods or their combination. Emulsion gels are widely used in food, pharmaceutical and cosmetic industries as carriers of bioactive substances and fat substitutes due to their unique properties. The modification of raw materials, and the application of different processing methods and associated process parameters profoundly affect the ease or difficult of gel formation, microstructure, hardness of the resulting emulsion gels. This paper reviews the important research undertaken in the last decade focusing on classification of emulsion gels, their preparation methods, the influence of processing method and associated process parameters on structure-function of emulsion gels. It also highlights current status of emulsion gels in food, pharmaceutical and medical industries and provides future outlook on research directions requiring to provide theoretical support for innovative applications of emulsion gels, particularly in food industry.

Acidic polysaccharides from black ear and silver ear mushrooms modulated the release and transport of glucose from gelatinised sorghum starch during digestion.

This study investigated the ability of acidic polysaccharides from Auricularia auricula-judae (AAP) and Tremella fuciformis (TFP) mushrooms to modulate starch digestion and absorption. Gelatinised sorghum starch was used as starch-rich material, and its digestion and glucose transport were determined through in vitro digestion/Caco-2 cells model. Results showed that fortification with 0.6% AAP/TFP increased the proportion of high molecular weight α-dextrin and delayed glucose diffusion from digested starch gels. Gelatinisation of sorghum starch with AAP and TFP reduced the amount of transported glucose by 34.2% and 38.7%, respectively. This reduction was related to the inhibition of AAP/TFP on α-glucosidase and the difficulty in the hydrolysis of high molecular weight maltooligosaccharides. The potential bonding of AAP/TFP to glucose transporter (SGLT1) also impeded glucose transport. The findings suggest that AAP/TFP could act as natural hypoglycaemic agents used in starch-based foods and provide a better understanding of the hypoglycaemic mechanism of mushroom polysaccharides.

Maillard reaction-based conjugation of Spirulina protein with maltodextrin using wet-heating route and characterisation of conjugates.

Spirulina protein concentrate (SPC) was extracted from Spirulina biomass and its structure and technofunctional properties were modified through Maillard reaction with maltodextrin (MD). Wet-heating route was adapted and Maillard reaction was controlled within initial to intermediate stage by avoiding or minimising the formation of melanoidins. A glycation degree of up to 29.1 % was achieved after reaction between SPC and MD, and molecular weight of the SPC increased accordingly. The solubility of SPC was improved only in the pH range around its isoelectric point after conjugation. The antioxidative property of the SPC-MD conjugate was also improved as the DPPH radical scavenging activity increased 19.7 to 30.2 %. Oil-in-water emulsion stabilised by SPC-MD conjugate produced at 6 h had significantly reduced droplet size, increased surface charge, and higher physical stability in temperature range 25-60 °C. The outcome of this research will help broaden the application of SPC in food as emulsifier and encapsulating shell material.

Omnifarious fruit polyphenols: an omnipotent strategy to prevent and intervene diabetes and related complication?

Diabetes mellitus is a metabolic syndrome which cannot be cured. Recently, considerable interest has been focused on food ingredients to prevent and intervene in complications of diabetes. Polyphenolic compounds are one of the bioactive phytochemical constituents with various biological activities, which have drawn increasing interest in human health. Fruits are part of the polyphenol sources in daily food consumption. Fruit-derived polyphenols possess the anti-diabetic activity that has already been proved either from in vitro studies or in vivo studies. The mechanisms of fruit polyphenols in treating diabetes and related complications are under discussion. This is a comprehensive review on polyphenols from the edible parts of fruits, including those from citrus, berries, apples, cherries, mangoes, mangosteens, pomegranates, and other fruits regarding their potential benefits in preventing and treating diabetes mellitus. The signal pathways of characteristic polyphenols derived from fruits in reducing high blood glucose and intervening hyperglycemia-induced diabetic complications were summarized.

Nostoc sphaeroides Cyanobacteria: a review of its nutritional characteristics and processing technologies.

Nostoc sphaeroides is an edible Cyanobacterium which has high nutritional value and is widely used in dietary supplements and therapeutic products. N. sphaeroides contains protein, fatty acid, minerals and vitamins. Its polysaccharides, phycobilin, phycobiliproteins and some lipids are highly bioactive. Thus, N. sphaeroides possesses anti-oxidation, anti-inflammation and cholesterol reducing functions. This paper reviews and evaluates the literature on nutritionally and functionally important compounds of N. sphaeroides. It also reviews and evaluates the processing of technologies used to process N. sphaeroides from fresh harvest to dry particulates including pretreatment, sterilization and drying, including their impact on sensorial and nutritional values. This review shows that a suitable combination of ultrasound, radio frequency and pulse spouted microwave with traditional sterilization and drying technologies greatly improves the sensorial and nutritive quality of processed N. sphaeroides and improves their shelf life; however, further research is needed to evaluate these hybrid technologies. Once suitably processed, N. sphaeroides can be used in food, cosmetics and pharmaceutical drugs as an ingredient.

Salt reducing and saltiness perception enhancing strategy for shiitake (Lentinus edodes) bud using novel combined treatment of yeast extract and radio frequency.

This study investigated the potential of yeast extract and radio frequency (RF) treatment as a strategy of reducing salt and enhancing saltiness perception for Lentinus edodes bud. The results of E-nose demonstrated yeast extract and RF treatment improved the saltiness of Lentinus edodes bud. Meanwhile, yeast extract and RF treatment significantly decreased the addition of salt (P < 0.05), and led to the formation of special flavor substances, whereas amino acid nitrogen content decreased. On the other hand, sensory attribute, hardness, total flavonoid and phenolic content, antioxidant capacity of L. edodes buds significantly (P < 0.05) increased after the yeast extract combined with RF treatment. In addition, the modification of water distribution, the formation of dense structure, uniform microstructure and Na+ distribution were observed in treated sample, causing the enhancement of saltiness perception. Accordingly, the alteration of properties contributed to higher sensory properties of texture, taste, flavor, and overall acceptability.