Expanding and Enriching the LncRNA Gene-Disease Landscape Using the GeneCaRNA Database.

The GeneCaRNA human gene database is a member of the GeneCards Suite. It presents ~280,000 human non-coding RNA genes, identified algorithmically from ~690,000 RNAcentral transcripts. This expands by ~tenfold the ncRNA gene count relative to other sources. GeneCaRNA thus contains ~120,000 long non-coding RNAs (LncRNAs, >200 bases long), including ~100,000 novel genes. The latter have sparse functional information, a vast terra incognita for future research. LncRNA genes are uniformly represented on all nuclear chromosomes, with 10 genes on mitochondrial DNA. Data obtained from MalaCards, another GeneCards Suite member, finds 1547 genes associated with 1 to 50 diseases. About 15% of the associations portray experimental evidence, with cancers tending to be multigenic. Preliminary text mining within GeneCaRNA discovers interactions of lncRNA transcripts with target gene products, with 25% being ncRNAs and 75% proteins. GeneCaRNA has a biological pathways section, which at present shows 131 pathways for 38 lncRNA genes, a basis for future expansion. Finally, our GeneHancer database provides regulatory elements for ~110,000 lncRNA genes, offering pointers for co-regulated genes and genetic linkages from enhancers to diseases. We anticipate that the broad vista provided by GeneCaRNA will serve as an essential guide for further lncRNA research in disease decipherment.

Static Guided Endodontic Approach for Pulp Canal Obliteration: A Case Report.

Traumatic injuries to the permanent dentition have deleterious sequelae if not treated adequately. In luxation injuries, it has been observed that tertiary dentin apposition may occur and can lead to calcification and closure of the pulp space. This is commonly referred to as pulp canal calcification or pulp canal obliteration. This often presents a challenge to clinicians when endodontic treatment is indicated. Static guided endodontic therapy has been advocated in such cases and has been successfully employed as a treatment strategy in recent years. This involves the design and fabrication of a digital stent, which serves as a guide for the clinician and provides a straight path to the targeted tissue site. This article reports a case of pulp canal obliteration secondary to a luxation injury sustained due to a vehicular accident. The case was treated using the static guided endodontic approach to achieve a minimal direct access to the targeted pulp chamber space.

The Effect of Matrix Metalloproteinase Inhibitors on the Microtensile Bond Strength of Dentin Bonding Agents in Caries Affected Dentin: A Systematic Review.

Aims and Objectives: Matrix metalloproteinases (MMPs) cause degradation of the dentinal matrix, as they act actively on collagen fibrils, leading to their deterioration and collapse. MMP inhibitors are known to be used for the pre-treatment of human dentin before bonding. Most studies on the MMP inhibitors examined the effect of MMP inhibitors on bonding to sound dentin (SD), but few examine their effect on bonding to caries affected dentin (CAD). This systematic review aims to identify and summarize studies that have applied MMP inhibitors for pre-treatment of CAD, and examine the microtensile bond strength (µTBS), bond durability, and the mode of failure. Materials and Methods: A systematic review was performed using the PubMed database according to the PRISMA guidelines. A total of 785 original articles published between 2010 and 2022 were initially retrieved. Six studies were selected based on predefined inclusion-exclusion criteria, and their outcomes were extracted and analyzed. The methodological quality assessment was performed using a combined checklist that utilizes the reporting criteria mentioned in the checklist for reporting in-vitro studies guidelines and guidelines for reporting pre-clinical in vitro studies on dental materials. Results: All six studies included here showed a definitive increase of the µTBS when MMP inhibitors were applied to the CAD. The mode of failure was found to be predominantly adhesive in nature. The deviation in the values of µTBS was approximately 2-5 MPa on immediate and delayed testing. Conclusion: MMP-inhibiting agents could be considered for the pretreatment of teeth with CAD as a part of their tooth preparation area, thereby allowing the clinician to retain CAD and bond to the CAD without endangering the vital pulp.

Sustainability in the global value chain-a scientometric analysis.

For its promise in enhancing sustainability, the global value chain (GVC) has grown in relevance and sparked many studies. Due to different value activities in multiple countries and industry clusters, the competition and cooperation among value chains have attracted the considerable attention of business leaders and academicians worldwide. GVC-related sustainability research is a niche area despite its widespread presence in the literature. To bridge the gap, we use scientometric analysis in this paper, examining the corpus of 753 articles published in Web of Science journals from 2001 till 2021. This review illuminates the research performance constituents (e.g., most prolific authors, nations, institutions, and journals), the themes and issues that underpin the fields' intellectual structure, and transforming discoveries. GVC depends on nine basic clusters for sustainability research (i.e., global value chain participation, gendered global production network, repositioning organisational dynamics, labour stands, learning opportunities, Internet era). Future studies can be conducted to generate new knowledge across ten thematic (based on keywords) clusters (i.e., market liberalisation, trade pollution nexus, value chain dynamics, global value chain reconfiguration, non-governmental organisation, multipolar governance). A model that encompasses current knowledge of the global value chain for sustainability is developed, and avenues for future research are provided.

A Prospective Study to Evaluate the Clinical and Diffusion Tensor Imaging (DTI) Correlation in Patients with Lumbar Disc Herniation with Radiculopathy.

Introduction: Conventional magnetic resonance imaging findings frequently do not correlate with the symptoms of lumbar disc herniation (LDH). Diffusion-weighted imaging can reveal important details about the microstructure of tissues. This study assessed the role of diffusion-weighted imaging (DTI) in LDH with radiculopathy and explored the relationship between DTI values and clinical scores. Methods: Forty-five patients with LDH with radiculopathy were evaluated via DTI at the intraspinal (IS), intraforaminal (IF), and extraforaminal (EF) levels. A visual analog scale (VAS) was used for low back and leg pain. The Japanese Orthopaedic Association (JOA) scoring system, Oswestry Disability Index (ODI), and Roland-Morris Disability Questionnaire (RMDQ) were used for functional evaluation. Results: There was a statistically significantly (p<0.05) difference between the apparent diffusion coefficient (ADC) and fractional anisotropy (FA) values on the affected side compared with those on contralateral normal side. The VAS score had a weak positive correlation with RMDQ score (r=0.279, P=0.050). The JOA score had a moderate negative correlation with RMDQ score (r=-0.428, P=0.002), whereas the ODI score had a moderate positive correlation with RMDQ score (r=0.554, P<0.001). There was a moderate positive correlation between ADC values at the IF level and the RMDQ score on the affected side (r=0.310, P=0.029). There was no correlation between FA values and JOA score. ODI had a significantly positive correlation with the contralateral normal side FA values at the IF (r=0.399, P=0.015), EF (r=0.368, P=0.008) and IS (r=0.343, P=0.015) levels. RMDQ had a weak positive correlation with the contralateral normal side FA values at the IF (r=0.311, P=0.028), IS (r=0.297, P=0.036) and EF (r=0.297, P=0.036) levels. Conclusions: The decrease in FA values and the increase in ADC values are useful markers of compression. ADC correlates well with the patient's neurological symptoms and functional status. Conversely, FA correlates well with the patient's neurological symptoms, but is not correlated well with the functional status.

Trade balance, monetary supply, commodity prices, and greener energy growth: contextual evidence from BRICS economies in the lens of sustainability.

The prime objective of this study is to examine the heterogenous impacts of money supply, commodity prices, and trade balance on the greener energy growth in BRICS economies. The BRICS economies are the leading trade block and have huge investments on greener energy projects. In doing so, we employ the data from January 2010 to May 2021 and employed panel fixed regression methods. The findings mention that change in inflation, export, import, industrial production, foreign direct investment (FDI), price of commodities, and money supply significantly affect greener energy growth. Notably, we observe that foreign investments, commodity prices, and money supply are the key factors for greener growth in BRICS economies. Overall, the study concludes interesting conclusions and implications in context of sustainability.

Advances in Drug Discovery based on Genomics, Proteomics and Bioinformatics in Malaria.

Malaria is one of the neglected infectious diseases, and drugs are the first line of action taken against the onset of malaria as therapeutics. The drugs can be of either natural or artificial origin. Drug development has multiple impediments grouped under three categories, a. drug discovery and screening, b. the drug's action on the host and the pathogen, and c. clinical trials. Drug development takes coon's age from discovery to the market after FDA approval. At the same time, targeted organisms develop drug resistance quicker than drug approval, raising the requirement for advancement in drug development. The approach to explore drug candidates using the classical methods from natural sources, computation-based docking, mathematical and machine learningbased high throughput in silico models or drug repurposing has been investigated and developed. Also, drug development with information about the interaction between Plasmodium species and its host, humans, may facilitate obtaining an efficient drug cohort for further drug discovery or repurposing expedition. However, drugs may have side effects on the host system. Hence, machine learning and systems-based approaches may provide a holistic view of genomic, proteomic, and transcriptomic data and their interaction with the selected drug candidates. This review comprehensively describes the drug discovery workflows using drug and target screening methodologies, followed by possible ways to check the binding affinity of the drug and targets using various docking software.

Polyclonal Antibody Generation against PvTRAg for the Development of a Diagnostic Assay for Plasmodium vivax.

The World Health Organization (WHO) has set forth a global call for eradicating malaria, caused majorly by the protozoan parasites Plasmodium falciparum and Plasmodium vivax. The lack of diagnostic biomarkers for P. vivax, especially those that differentiate the parasite from P. falciparum, significantly hinders P. vivax elimination. Here, we show that P. vivax tryptophan-rich antigen (PvTRAg) can be a diagnostic biomarker for diagnosing P. vivax in malaria patients. We report that polyclonal antibodies against purified PvTRAg protein show interactions with purified PvTRAg and native PvTRAg using Western blots and indirect enzyme-linked immunosorbent assay (ELISA). We also developed an antibody-antigen-based qualitative assay using biolayer interferometry (BLI) to detect vivax infection using plasma samples from patients with different febrile diseases and healthy controls. The polyclonal anti-PvTRAg antibodies were used to capture free native PvTRAg from the patient plasma samples using BLI, providing a new expansion range to make the assay quick, accurate, sensitive, and high-throughput. The data presented in this report provides a proof of concept for PvTRAg, a new antigen, for developing a diagnostic assay for P. vivax identification and differentiation from the rest of the Plasmodium species and, at a later stage, translating the BLI assay into affordable, point-of-care formats to make it more accessible.

Multi-Omics Advancements towards Plasmodium vivax Malaria Diagnosis.

Plasmodium vivax malaria is one of the most lethal infectious diseases, with 7 million infections annually. One of the roadblocks to global malaria elimination is the lack of highly sensitive, specific, and accurate diagnostic tools. The absence of diagnostic tools in particular has led to poor differentiation among parasite species, poor prognosis, and delayed treatment. The improvement necessary in diagnostic tools can be broadly grouped into two categories: technologies-driven and omics-driven progress over time. This article discusses the recent advancement in omics-based malaria for identifying the next generation biomarkers for a highly sensitive and specific assay with a rapid and antecedent prognosis of the disease. We summarize the state-of-the-art diagnostic technologies, the key challenges, opportunities, and emerging prospects of multi-omics-based sensors.

Effect of fibre-reinforced composite as a post-obturation restorative material on fracture resistance of endodontically treated teeth: A systematic review.

BACKGROUND: Fracture resistance of endodontically treated tooth is affected due to large cavity designs and access cavities and an appropriate material capable to resist fracture plays an important role. This review aims to evaluate the effect of fibre-reinforced composite (FRC) as a post-obturation material on fracture resistance of endodontically treated teeth. OBJECTIVES: To systematically gather and evaluate the fracture resistance of fibre-reinforced composite as a post-obturation restorative material in endodontically treated teeth. DATA SOURCES: A systematic search was conducted using PubMed, Ebsco Host, Scopus, Google Scholar, Hinari and manual search library resources from 1st Jan 2000 to 30th November 2019 to identify appropriate studies. RESULT: A total of 157 articles were examined out of which 55 articles were selected after reading the title. After removing the duplicates, 27 articles were screened for abstract and 1 article was eliminated as it did not meet the eligibility criteria. A thorough reading of the full text of the remaining 26 selected articles was assessed for eligibility. Amongst these, 1 article was then excluded from the study as the full text was not accessible. Lastly, 25 articles were included in the study. CONCLUSION: FRC as a core material increases fracture resistance of endodontically treated teeth but they do not have the fracture resistance similar to the intact tooth. Both polyethylene and short fibre-reinforced composites showed greater fracture resistance when compared to glass FRC and restoration without reinforcement. Also, the fracture resistance increases if restored with FRC along with retention slots and are placed on the occlusal third surfaces of cavities. Also, favourable fractures were most commonly seen and it usually occurred at the level of enamel and dentin and adhesive fractures were seen.

Role of Multiomics Data to Understand Host-Pathogen Interactions in COVID-19 Pathogenesis.

Human infectious diseases are contributed equally by the host immune system's efficiency and any pathogens' infectivity. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the coronavirus strain causing the respiratory pandemic coronavirus disease 2019 (COVID-19). To understand the pathobiology of SARS-CoV-2, one needs to unravel the intricacies of host immune response to the virus, the viral pathogen's mode of transmission, and alterations in specific biological pathways in the host allowing viral survival. This review critically analyzes recent research using high-throughput "omics" technologies (including proteomics and metabolomics) on various biospecimens that allow an increased understanding of the pathobiology of SARS-CoV-2 in humans. The altered biomolecule profile facilitates an understanding of altered biological pathways. Further, we have performed a meta-analysis of significantly altered biomolecular profiles in COVID-19 patients using bioinformatics tools. Our analysis deciphered alterations in the immune response, fatty acid, and amino acid metabolism and other pathways that cumulatively result in COVID-19 disease, including symptoms such as hyperglycemic and hypoxic sequelae.

Multiplexed quantitative proteomics provides mechanistic cues for malaria severity and complexity.

Management of severe malaria remains a critical global challenge. In this study, using a multiplexed quantitative proteomics pipeline we systematically investigated the plasma proteome alterations in non-severe and severe malaria patients. We identified a few parasite proteins in severe malaria patients, which could be promising from a diagnostic perspective. Further, from host proteome analysis we observed substantial modulations in many crucial physiological pathways, including lipid metabolism, cytokine signaling, complement, and coagulation cascades in severe malaria. We propose that severe manifestations of malaria are possibly underpinned by modulations of the host physiology and defense machinery, which is evidently reflected in the plasma proteome alterations. Importantly, we identified multiple blood markers that can effectively define different complications of severe falciparum malaria, including cerebral syndromes and severe anemia. The ability of our identified blood markers to distinguish different severe complications of malaria may aid in developing new clinical tests for monitoring malaria severity.

Comprehensive proteomics investigation of P. vivax-infected human plasma and parasite isolates.

BACKGROUND: In recent times, Plasmodium vivax (P. vivax) has become a serious threat to public health due to its ability to cause severe infection with fatal outcomes. Its unique biology makes it resilient to control measures that are otherwise effective against P. falciparum. A deeper understanding of P. vivax biology and pathogenesis is, therefore, essential for developing the right control strategies. Proteomics of P. falciparum has been helpful in studying disease biology and elucidating molecular mechanisms involved in the development of disease. However, unlike P. falciparum, proteomics data for P. vivax infection is minimal due to the absence of a continuous culture system. The dependence on clinical samples and animal models has drastically limited P. vivax research, creating critical knowledge gaps in our understanding of the disease. This study describes an in-depth proteomics analysis of P. vivax-infected human plasma and parasite isolates, to understand parasite biology, pathogenesis, and to identify new diagnostic targets for P. vivax malaria. METHODS: A mass-spectrometry- (MS) based proteomics approach (Q Exactive) was applied to analyze human plasma and parasite isolates from vivax malaria patients visiting a primary health centre in India. Additionally, a targeted proteomics assay was standardized for validating unique peptides of most recurring parasite proteins. RESULTS: Thirty-eight P. vivax proteins were detected in human plasma with high confidence. Several glycolytic enzymes were found along with hypothetical, cytoskeletal, ribosomal, and nuclear proteins. Additionally, 103 highly abundant P. vivax proteins were detected in parasite isolates. This represents the highest number of parasite proteins to be reported from clinical samples so far. Interestingly, five of these; three Plasmodium exported proteins (PVX_003545, PVX_003555 and PVX_121935), a hypothetical protein (PVX_083555) and Pvstp1 (subtelomeric transmembrane protein 1, PVX_094303) were found in both plasma and parasite isolates. CONCLUSIONS: A parasite proteomics investigation is essential to understand disease pathobiology and design novel interventions. Control strategies against P. vivax also depend on early diagnosis. This work provides deeper insights into the biology of P. vivax by identifying proteins expressed by the parasite during its complex life-cycle within the human host. The study also reports antigens that may be explored as diagnostic candidates.

Comparative evaluation of the sealing ability of filling materials on root end cavities treated with smear layer removing agents: A confocal laser scanning microscopic study.

AIM: This study aims to evaluate and compare the sealing ability of Biodentine™ and mineral trioxide aggregate (MTA) plus® on root end cavities treated with 17% ethylene diamine tetraacetic acid (EDTA), 0.2% Chitosan and 1% Phytic acid using Confocal Laser Scanning Microscope (CLSM)-An in vitro study. MATERIALS AND METHODS: Sixty extracted single rooted teeth were instrumented and obturated with gutta-percha. The apical 3 mm of each tooth was resected and 3 mm root-end preparation was made using ultrasonic tip. 17% EDTA (n = 20), 0.2% Chitosan (n = 20) and 1% Phytic acid (n = 20) was used as a smear layer removing agent and each above group was further subdivided and restored with a root end filling material, Biodentine (n = 10) and MTA Plus (n = 10). The samples were coated with varnish except at the root end and after drying, they were immersed in Rhodamine B dye for 24 h. The teeth were then rinsed, sectioned longitudinally, and observed under CLSM. RESULTS: In the present study, MTA Plus® treated with 1% Phytic acid showed the least microleakage followed by Biodentine™ treated with 1% Phytic acid which was statistically not significant. MTA Plus® treated with 17% EDTA showed the highest microleakage when compared to other tested groups. There was a significant difference in microleakage between MTA Plus® and Biodentine™ when treated with 17% EDTA and 0.2% Chitosan. However, more microleakage was seen with Biodentine™ group than MTA plus® group. CONCLUSION: Root end cavities restored with MTA plus and treated with Phyitc acid showed superior sealing ability. Furthermore, smear layer removing agents will aid in better adaptability of root end filling material.

Comparative evaluation of the bond strength of posterior composite with different cavity configurations and different liners using a two-step etch and rinse adhesive system: In vitro study.

INTRODUCTION: Conventional Class II cavity preparations used for restoring small lesions with amalgam may be inappropriate for composite resin restorations due to the extensive cavity form, large occlusal contact area, and thin or missing margins of the tooth. Cavity preparation in the proximal areas as per the precepts of Clark is a conservative method of caries excavation and tooth preparation. MATERIALS AND METHODS: Conventional Class II and Clark's Class II cavities were prepared on the mesial surfaces of 60 molars. All cavities were given a standard buccolingual width of 2 mm, an occlusogingival height of approximately 3.5 mm and an axial depth of 1.5 mm. These were then restored using flowable composites or resin-modified glass-ionomer cement liners and nanohybrid composites. The compressive bond strength was tested with a universal testing machine. RESULTS: The compressive bond strength was the highest for Clarks Class II cavity preparation with a lining of flowable composites. Conventional Box only Class II cavities restored with flowable liners showed the next best result. CONCLUSION: Clark's class II cavity preparation can be used as efficiently as the conventional Class II box preparation with the advantage of preserving more tooth structure, more precise tooth preparation, good bond strength and better esthetics.

The evaluation of interfaces between MTA and two types of GIC (conventional and resin modified) under an SEM: An in vitro study.

CONTEXT: Mineral trioxide aggregate (MTA) is a biocompatible repair material that is often used along with glass ionomer cement (GIC) in many clinical situations. AIMS: In this study, the interface of GIC and MTA was examined, and the effect of time on this interface was tested. MATERIALS AND METHODS: Forty 9-mm hollow cylindrical glass molds were filled with MTA and then according to the group either conventional GIC or resin-modified GIC (RMGIC) is filled immediately or after 45 min. The specimens were then sectioned, carbon coated, and examined using a scanning electron microscope (SEM) and the elemental analysis was done. STATISTICAL ANALYSIS: Observational study, no statistical analysis done. RESULTS: The SEM showed that both the groups underwent adhesive separation and gap formation at the interface. The specimens in which GIC was condensed over freshly mixed MTA (group IIA and group IIB) also showed cohesive separation in MTA; however, it was more in the GIC condensed after 45 min over MTA groups (group IA and group IB). The results were better for conventional GIC than RMGIC. CONCLUSIONS: GIC can be applied over freshly mixed MTA with minimal effects on the MTA, but this effect decreases with time.

Comparative evaluation of two different remineralizing agents on the microhardness of bleached enamel surface: Results of an in vitro study.

CONTEXT: Various agents are studied for their remineralization potential. AIM: To evaluate the effect of GC Tooth Mousse and Toothmin Tooth Cream on microhardness of bleached enamel. SETTINGS AND DESIGN: In vitro- study. METHODS AND MATERIAL: Twenty freshly extracted anterior teeth were cut sagittally and impregnated in cold cure acrylic resin. Specimens were kept in artificial saliva to prevent from dehydration. After measuring baseline hardness, teeth were randomly divided into two groups. Everbrite In - Office Tooth whitening kit (Dentamerica) was used to demineralize the teeth following which hardness was measured again. Teeth in group one (n=10) and group two (n=10) were treated with GC tooth mousse (Recaldent) and Toothmin tooth cream (Abbott Healthcare Pvt.Ltd) daily for seven days and microhardness of enamel surface was measured. STATISTICAL ANALYSIS USED: Mean, SD, and percentage change in the microhardness were calculated. Student's paired t-test was used to evaluate the signifi cance of change from initial, after bleaching for 5 min and after 1-week remineralization Unpaired't' test was used to compare difference between groups. RESULTS: Microhardness significantly decreased in both groups after bleaching (% change group one: 3.24% group two: 3.26% in group; P<0.01 in both groups). Both products significantly increased mineralization after seven days of treatment (P<0.01). Remineralization was numerically better in Toothmin group (Abbott Healthcare Pvt.Ltd ) compared to GC Mousse(Recaldent) (% change 3.27% vs 6.34%). However, difference was not significant (P >0.05). CONCLUSION: Both GC Tooth Mousse (Recaldent) and Toothmin Tooth cream (Abbott Healthcare Pvt.Ltd) increase the microhardness of bleached enamel. Toothmin tooth cream is a better agent for increasing microhardness, although difference is not significant.

Serum ßhCG and Lipid Profile in Early Second Trimester as Predictors of Pregnancy-Induced Hypertension.

OBJECTIVES: A variety of biological, biochemical, and biophysical markers implicated in the pathophysiology of pre-eclampsia during the last two decades have instigated the growing interest in this study to include both ßhCG and lipid profile studies in the early second trimester as early predictors of pregnancy-induced hypertension. Early identification of at-risk women may help in taking timely preventive and curative management to prevent or delay complications associated with pregnancy-induced hypertension. METHOD: A prospective study was performed on 120 patients attending the outpatient department of the Obstetrics and Gynaecology of the Maharaja Agrasen Hospital. All the patients were screened for serum ßhCG and serum lipid profile in their early second trimester (14-20 weeks) and followed up till their delivery. Comparative studies of serum ßhCG and serum lipid profile were performed between those who remain normotensive (group I) and those who developed pregnancy-induced hypertension (group II). RESULTS: TG, total cholesterol, VLDL, and LDL values for those women who developed PIH (group II) were significantly higher than those who remain normotensive (group I), with p value of <0.05 which is statistically significant. HDL and ßhCG values for group II were not higher than those in group I with p value >0.05 which is statistically insignificant. CONCLUSION: Maternal lipid profile in second trimester is very good noninvasive test which can be used for prediction of pregnancy-induced hypertension before its clinical onset. However, there is no correlation between maternal serum ßhCG and pregnancy-induced hypertension.

Lumbar plexus injury in an anterior fracture dislocation of sacroiliac joint: a case report and review of literature.

Displaced unstable pelvic fractures are commonly associated with disruption of the osteoarticular junction of the sacroiliac joint. Posterior sacroiliac dislocation are commonly reported but there are only few reports the anterior type of sacroiliac dislocation where the iliac bone fractures and displaces anterior to sacrum, often in combination with fractures of pubic rami and symphyseal injuries. We present a case of an anterior type of sacroiliac fracture dislocation which was associated with a lumbar plexus injury involving both motor and sensory components. Preoperative neurological assessment was done by MRI scan. The tented nerve roots were explored and decompressed surgically, and sacroiliac fixation was done after reduction in the fracture and joint.

Finite element analysis of stress concentration in three popular brands of fiber posts systems used for maxillary central incisor teeth.

AIMS AND OBJECTIVES: To study the stress concentrations in endodontically treated maxillary central incisor teeth restored with 3 different fiber post systems subjected to various oblique occlusal loads. MATERIALS AND METHODS: FEM analysis was used to analyze stress concentrations generated in maxillary anterior teeth. Computer aided designing was used to create a 2-D model of an upper central incisor. Post systems analyzed were the DT Light Post (RDT, Bisco), Luscent Anchor (Dentatus) & RelyX (3M-ESPE). The entire design assembly was subjected to analysis by ANSYS for oblique loading forces of 25N, 80N & 125 N RESULTS: The resultant data showed that the RelyX generated the least amount of stress concentration. CONCLUSIONS: Minimal stress buildups contribute to the longevity of the restorations. Thus RelyX by virtue of judicious stress distribution is the better option for restoration of grossly decayed teeth.