Induction of Dormancy in Cryptococcus neoformans In Vitro: The HypNOS Protocol.

Cryptococcus neoformans is the second major cause of death in patients with HIV. During a latent infection, this pathogenic fungus survives in the host for years without causing symptoms of active disease. Upon favorable conditions, such as immunosuppression due to HIV infection, or other conditions (steroid use or organ transplantation), the yeast may reactivate and cause active cryptococcosis. Hence, dormancy is an important phase in the pathogenesis of C. neoformans. Additionally, C. neoformans also persists during antifungal treatment and causes disease recurrence, which is a major medical problem, especially in low- and middle-income countries. To survive in the host, yeast cells must react to the stresses they are exposed to and generate a cellular response that is favorable for yeast survival. A prominent strategy used by C. neoformans to combat challenging surroundings is dormancy, which may translate into a viable, but nonculturable phenotype (VBNC). This chapter describes an in vitro protocol to generate and characterize dormant Cryptococci.

Microbial Indoles: Key Regulators of Organ Growth and Metabolic Function.

Gut microbes supporting body growth are known but the mechanisms are less well documented. Using the microbial tryptophan metabolite indole, known to regulate prokaryotic cell division and metabolic stress conditions, we mono-colonized germ-free (GF) mice with indole-producing wild-type Escherichia coli (E. coli) or tryptophanase-encoding tnaA knockout mutant indole-non-producing E. coli. Indole mutant E. coli mice showed multiorgan growth retardation and lower levels of glycogen, cholesterol, triglycerides, and glucose, resulting in an energy deficiency despite increased food intake. Detailed analysis revealed a malfunctioning intestine, enlarged cecum, and reduced numbers of enterochromaffin cells, correlating with a metabolic phenotype consisting of impaired gut motility, diminished digestion, and lower energy harvest. Furthermore, indole mutant mice displayed reduction in serum levels of tricarboxylic acid (TCA) cycle intermediates and lipids. In stark contrast, a massive increase in serum melatonin was observed-frequently associated with accelerated oxidative stress and mitochondrial dysfunction. This observational report discloses functional roles of microbe-derived indoles regulating multiple organ functions and extends our previous report of indole-linked regulation of adult neurogenesis. Since indoles decline by age, these results imply a correlation with age-linked organ decline and levels of indoles. Interestingly, increased levels of indole-3-acetic acid, a known indole metabolite, have been shown to correlate with younger biological age, further supporting a link between biological age and levels of microbe-derived indole metabolites. The results presented in this resource paper will be useful for the future design of food intervention studies to reduce accelerated age-linked organ decline.

Silk Industry Waste Protein-Derived Sericin Hybrid Nanoflowers for Antibiotics Remediation via Circular Economy.

Hybrid protein-copper nanoflowers have emerged as promising materials with diverse applications in biocatalysis, biosensing, and bioremediation. Sericin, a waste biopolymer from the textile industry, has shown potential for fabricating such nanoflowers. However, the influence of the molecular weight of sericin on nanoflower morphology and peroxidase-like activity remains unexplored. This work focused on the self-assembly of nanoflowers using high- and low-molecular-weight (HMW and LMW) silk sericin combined with copper(II) as an inorganic moiety. The peroxidase-like activity of the resulting nanoflowers was evaluated using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and hydrogen peroxide (H2O2). The findings revealed that high-molecular-weight sericin hybrid nanoflowers (HMW-ShNFs) exhibited significantly higher peroxidase-like activity than low-molecular-weight sericin hybrid nanoflowers (LMW-ShNFs). Furthermore, HMW-ShNFs demonstrated superior reusability and storage stability, thereby enhancing their potential for practical use. This study also explored the application of HMW-ShNF for ciprofloxacin degradation to address the environmental and health hazards posed by this antibiotic in water. The results indicated that HMW-ShNFs facilitated the degradation of ciprofloxacin, achieving a maximum degradation of 33.2 ± 1% at pH 8 and 35 °C after 72 h. Overall, the enhanced peroxidase-like activity and successful application in ciprofloxacin degradation underscore the potential of HMW-ShNFs for a sustainable and ecofriendly remediation process. These findings open avenues for the further exploration and utilization of hybrid nanoflowers in various environmental applications.

Pulmonary Spindle Cell Carcinoma: As Rare as a Hen's Teeth.

This case is about a 70-year-old man who presented with symptoms and laboratory reports that indicated differentials toward an infectious disease (pneumonia and tuberculosis). A lung mass was found in his chest X-ray and in the computerized tomography (CT) scan of his thorax. A biopsy was taken from the lung mass, and histopathological examination and immunohistochemical staining of the biopsy were done. The results revealed the presence of spindle cell carcinoma (SpCC) with vimentin and cytokeratin positivity. Spindle cell lung cancer is a rare type of non-small cell lung carcinoma, for which all available research indicates a poor prognosis. Due to the rarity of diagnosis, there is a dearth of information about the epidemiology and overall survival of affected patients.

Unveiling the potential of cellulose nanofibre based nitrogen fertilizer and its transformative effect on Vigna radiata (Mung Bean): nanofibre for sustainable agriculture.

Introduction: Fertilizer management is crucial to maintaining a balance between environmental health, plant health, and total crop yield. Farmers are overutilizing fertilizers with a mind set to enhance the productive capacity of the field, which adversely impacts soil fertility and causes serious environmental hazards. To mitigate the issues of over-utilization of fertilizers, controlled-release fertilizers were developed using nitrogen fertilizer (ammonium chloride) loaded on cellulose nanofibres (named CNF*N). Methodology: In this study, the effects of CNF*N were compared with commercial nitrogen fertilizer (ammonium chloride) on Vigna radiata (Mung) under greenhouse conditions. The pot experiment was conducted using six treatments: first treatment was control, where the plant was cultivated (T1); second treatment was T2, where the plant was cultivated with CNF to determine the impact of CNF on the plant; third was T3 where commercial ammonium chloride (24 mg/ 2 kg soil) was added to the plant; fourth was T4, where the plant was loaded with CNF, viz. CNF*N contains 4.8 mg of nitrogen; fifth was T5 CNF*N pellet contains 12 mg of nitrogen, and the last sixth treatment (T6) where CNF*N pellet containing 24 mg of nitrogen. Results: It indicated that the growth parameters were best achieved in T6 treatment. Plant height was at its maximum in the T6 treatment (44.4 ±0.1cm) after the second harvest, whereas the minimum plant height was observed in T1, which was 39.1 ±0.1 cm. Root-to-shoot weight ratio was also maximum in T6 (0.183± 0.02) and minimum in T1 (0.07± 0.01) after second harvesting. The significant difference among the treatments was determined with Tukey's honestly significant difference (HSD). The nitrogen content (available and total) was significantly higher in the T4, T5, and T6 treatments (0.22, 0.25, and 0.28%) as compared to the control treatments (T1 (0.12%), T2 (0.13%), and T3 (0.14%) during the second harvesting stage (90 days), as nitrogen plays a crucial role in the development of vegetative growth in Vigna radiata. The rate of controlled-release nitrogen-fertilizer was found to be optimal in terms of plant growth and soil nutrients; hence, it could potentially play a crucial role in improving soil health and the yield of the crop.

Understanding the excited state dynamics and redox behavior of highly luminescent and electrochemically active Eu(III)-DES complex.

Deep eutectic solvents (DES) are considered a novel class of environmentally benign molecular solvents that are considered as potential solvents for nuclear fuel reprocessing, material recycling, and many other technological applications in both research and industry. However, there is a complete dearth of understanding pertaining to the behavior of metal ions in DES. Herein, we have investigated the speciation, complexation behavior, photochemistry, and redox properties and tried to obtain insight into the chemical aspects of the europium ion in DES (synthesized from heptyltriphenylphosphonium bromide and decanoic acid). The same has been probed using time-resolved photoluminescence (TRPL), cyclic voltammetry (CV), synchrotron-based extended X-ray absorption fine structure (EXAFS) spectroscopy, and density functional theory (DFT) calculations. TRPL indicated the stabilization of europium in the +3 oxidation state, favoring the potential of the Eu(III)-DES complex to emit red light under near UV excitation and the existence of inefficient energy transfer between DES and Eu3+. EXAFS analysis revealed the presence of Eu-O and Eu-Br, which represent the local surroundings of Eu3+ in the Eu(III)-DES complex. TRPL measurement has also suggested two distinct local environments of europium ions in the complex. DFT calculations supported the EXAFS findings, confirming that the Eu(III)-DES structure involves not only the oxygen atom of decanoic acid but also the oxygen atoms from the nitrate ions, contributing to the local coordination of Eu(III). Electrochemical studies demonstrated that the redox reaction of Eu(III)/Eu(II) in DES displays quasi-reversible behavior. The reaction rate was observed to increase with higher temperatures. The findings of this study can contribute to the understanding of the fundamental properties and potential applications of this luminescent and electrochemically active complex and pave the way for further studies and the development of novel materials with enhanced luminescent and electrochemical properties.

Kicking sleepers out of bed: Macrophages promote reactivation of dormant Cryptococcus neoformans by extracellular vesicle release and non-lytic exocytosis.

Macrophages play a key role in disseminated cryptococcosis, a deadly fungal disease caused by Cryptococcus neoformans. This opportunistic infection can arise following the reactivation of a poorly characterized latent infection attributed to dormant C. neoformans. Here, we investigated the mechanisms underlying reactivation of dormant C. neoformans using an in vitro co-culture model of viable but non-culturable (VBNC; equivalent of dormant) yeast cells with bone marrow-derived murine macrophages (BMDMs). Comparative transcriptome analysis of BMDMs incubated with log, stationary phase or VBNC cells of C. neoformans showed that VBNC cells elicited a reduced transcriptional modification of the macrophage but retaining the ability to regulate genes important for immune response, such as NLRP3 inflammasome-related genes. We further confirmed the maintenance of the low immunostimulatory capacity of VBNC cells using multiplex cytokine profiling, and analysis of cell wall composition and dectin-1 ligands exposure. In addition, we evaluated the effects of classic (M1) or alternative (M2) macrophage polarization on VBNC cells. We observed that intracellular residence sustained dormancy, regardless of the polarization state of macrophages and despite indirect detection of pantothenic acid (or its derivatives), a known reactivator for VBNC cells, in the C. neoformans-containing phagolysosome. Notably, M0 and M2, but not M1 macrophages, induced extracellular reactivation of VBNC cells by the secretion of extracellular vesicles and non-lytic exocytosis. Our results indicate that VBNC cells retain the low immunostimulatory profile required for persistence of C. neoformans in the host. We also describe a pro-pathogen role of macrophage-derived extracellular vesicles in C. neoformans infection and reinforce the impact of non-lytic exocytosis and the macrophage profile on the pathophysiology of cryptococcosis.

Rice straw-derived cellulose: a comparative study of various pre-treatment technologies and its conversion to nanofibres.

Rice straw is a waste product generated after the harvesting of rice crops and is commonly disposed of by burning it off in open fields. This study explored the potential for the extraction and conversion of cellulose to cellulose nanofibres (CNFs) to be used as smart delivery systems for fertilizers applications. In this study, alkali, steam explosion, and organosolv treatments were investigated for cellulose extraction efficiency. The morphological characterization of cellulose showed smooth fibrillar structures. Fourier transform infrared spectroscopy represented significant removal of non-cellulosic components in treatments. The crystallinity increased from 52.2 to 65% in CNFs after fibrillation. Cellulose nanofibres (CNFs) had an average diameter of 37.4 nm and - 25.2 mV surface charges as determined by SEM and zeta potential, respectively, which have desired properties for holding fertilizers. Therefore, this study paves the way for value-added uses of rice straw as alternatives to current environmentally harmful practices.

Controlled release fertilizer delivery system derived from rice straw cellulose nanofibres: a circular economy based solution for sustainable development.

Recently, the development of sustainable and environmentally friendly biomaterials has gained the attention of researchers as potential alternatives to petroleum-based materials. Biomaterials are a promising candidate to mitigate sustainability issues due to their renewability, biodegradability, and cost-effectiveness. Thus, the purpose of this study is to explore a cost-effective biomaterial-based delivery system for delivering fertilizers to plants. To achieve this, rice straw (agro-waste) was selected as a raw material for the extraction of cellulose. The cellulose was extracted through alkali treatment (12% NaOH), followed by TEMPO-based oxidation. The cellulose nanofibers were characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy, and transmission electron microscopy. In scanning electron microscopy, a loosening of the fibrillar structure in cellulose nanofibers (CNFs) was observed with a diameter of 17 ± 4 nm. The CNFs were loaded with nitrogen-based fertilizer (ammonium chloride) in 1:1, 1:2, and 2:1 (w/w) proportions. The loading was estimated through surface charge variation; in the case of the 1:1 sample, maximum reductions in surface charge were seen from -42.0 mV to -12.8 mV due to the binding of positive ammonium ions. In the release kinetics study, a controlled release pattern was observed at 1:1, which showed a 58% cumulative release of ammonium ions within 8 days. Thus, the study paves the way for value-added uses of rice straw as an alternative to the current environmentally harmful practices.

Bio-based cellulose nanofibers (CNFs) from rice straw via circular economy approach.Controlled release fertilizers for sustainable agriculture.Nanotechnology for precision agriculture and decarbonization via agricultural waste management.

Survey of Indian Dental Professionals Regarding the Use of Computer-Aided Design/Computer-Aided Manufacture (CAD/CAM) Technology.

Objective In recent years, digital processes like computer-aided design/computer-aided manufacture (CAD/CAM) have been implemented in dentistry. On the use and reporting of this technology by dentists, there is no published information. The goal of this study was to determine whether CAD/CAM technology had infiltrated Indian dentistry practices and to look into the relationship between various demographic parameters and respondents' answers about using or not using this technology. Materials and methods A sample of Indian dentists, both users and non-users of CAD/CAM, were sent about 500 online surveys. It sought to shed light on the usage style, materials, advantages, and limitations of CAD/CAM dentistry, as well as their perceived advantages and access hurdles. Statistical analysis was conducted to determine the impact of numerous demographic factors, including country of employment, dentist experience, educational attainment, and the nature of the job. Results There were 132 total replies that were finished. The majority of respondents didn't use any aspect of a digital workflow, and the biggest obstacles to using CAD/CAM were the upfront expenses and a lack of perceived advantages over traditional techniques. The likelihood of using CAD/CAM technology was highest among dentists who primarily performed private practice (P<0.0001). A third of users thought that their training was insufficient, even though the majority of users were either self-taught or schooled by firms. The majority of respondents (60.6%) believed that CAD/CAM would have a significant future role. Conclusion Most respondents said they had never used any aspect of a digital process. Although most dentists who responded to the study thought CAD/CAM would play a significant role in the future, the majority were still interested in integrating it into their workflow. Dentists continue to have certain concerns regarding the chairside CAD/CAM restorations' quality.

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA.

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

Algal polysaccharides for 3D printing: A review.

Algae hold particular promise as a feedstock for biomaterials, as they are capable of producing a wide variety of polymers with the properties required for 3D printing. However, the use of algal polymers has been limited to alginate, agar, carrageenan, and ulvan extracted from seaweeds. Diverse algal taxa beyond seaweeds have yet to be explored. In this comprehensive review, we discuss available algal biomaterials, their properties, and emerging applications in 3D printing techniques. We also identify elite algal strains to be used in 3D printing and comment on both advantages and limitations of algal biomass as a printing material. Global 3D printing market trends and material demands are also critically analyzed. Finally, the future prospects, opportunities, and challenges for using algal polymers in 3D printing market for a sustainable economy are discussed. We hope this review will provide a foundation for exploring the 3D printable biomaterials from algae.

A Substantial Role of Agro-Textiles in Agricultural Applications.

Agro-textiles have been used in the agriculture sector for thousands of years and are an attractive tool for the protection of crops during their entire lifecycle. Currently, the agro-textile market is dominated by polyolefins or petrochemical-based agro-textiles. However, climate change and an increase in greenhouse gas emissions have raised concern about the future oil-based economy, and petroleum-based agro-textiles have become expensive and less desirable in the modern world. Other products include agro-textiles based on natural fibers which degrade so fast in the environment that their recovery from the field becomes difficult and unattractive even by efficient recycling or combustion, and their lifetime is usually limited to 1 or a maximum of 2 years. Hence, the development of bio-based agro-textiles with a reduced impact on the environment and with extended durability is foreseen to initiate the growth in the bio-based economy. The world is gradually preparing the shift toward a bio-based economy, and research for sustainable bio-based alternatives has already been initiated. This review provides insight into the various agro-textiles used currently in agriculture and the research going on in the area of agro-textiles to offer alternative solutions to the current agro-textile market.

Next generation applications of lignin derived commodity products, their life cycle, techno-economics and societal analysis.

The pulp and biorefining industries produce their waste as lignin, which is one of the most abundant renewable resources. So far, lignin has been remained severely underutilized and generally burnt in a boiler as a low-value fuel. To demonstrate lignin's potential as a value-added product, we will review market opportunities for lignin related applications by utilizing the thermo-chemical/biological depolymerization strategies (with or without catalysts) and their comparative evaluation. The application of lignin and its derived aromatics in various sectors such as cement industry, bitumen modifier, energy materials, agriculture, nanocomposite, biomedical, H2 source, biosensor and bioimaging have been summarized. This comprehensive review article also highlights the technical, economic, environmental, and socio-economic variable that affect the market value of lignin-derived by-products. The review shows the importance of lignin, and its derived products are a platform for future bioeconomy and sustainability.

The Ring Fencing Mechanism: a case study of innovative self-financing approach for energy efficiency upgrades.

This paper introduces an enhanced energy auditing process including a ring-fencing mechanism for the selection of energy efficiency measures considering a multi-stage planning of the energy retrofitting project. The proposed ring-fencing approach enables SMEs to overcome the barrier of lack of capital for the implementation of energy efficiency measures by implementing first no-cost measures and only after that energy savings are accumulated considering the installation of low-cost, medium-cost and finally high-cost measures. The advantages of the proposed methodology are illustrated by means of three case studies, where a variety of energy efficiency measures were first identified throughout the auditing process involving three different SMEs, then most effective measures were selected and scheduled to be implemented according to a multi-annual plan while considering budget and operational constraints. The results of the pilot studies show that the business owners have improved their decision-making with respect to energy efficiency upgrades by engaging in the auditing process and accepting the recommendations about the suggested interventions to maximize financial (and environmental) benefits.

Analysis of business models for delivering energy efficiency through smart energy services to the European commercial rented sector.

In this paper, we perform a comparative analysis of business models used by Energy Service Companies (ESCOs), suitable for the deployment of energy efficiency measures in the commercial rented sector across Europe. These models can effectively contribute to solving the split-incentive issue that arises in the rented building scenario. Some of them are obtained from their "traditional" counterparts, which do not consider the rented scenario, but just a bipartite agreement between an Energy Service Company and its client. The EU Horizon 2020 project SmartSPIN (Smart energy services to solve the SPlit INcentive problem in the commercial rented sector) targets delivery of enhanced energy services for commercial rented sector. These enhanced energy services (a) combine demand management services and energy efficiency interventions, (b) facilitate the adoption of renewables, (c) optimize the balance between demand and supply, (d) alleviate the split incentive issue. The pilot implementation of SmartSPIN is in progress in a business park in Greece, in an office building in Ireland and in two shopping centers in Spain. Key recommendations toward the implementation of such a smart energy service are provided in this paper. They have been obtained from a detailed analysis of ten interviews of key stakeholders of the energy efficiency sector and of the commercial rented sector, along with an analysis of a selection of the most relevant technical literature. This paper argues that the classical shared savings and guaranteed savings ESCOs models may be adapted to the commercial rented sector and used at SmartSPIN's demonstration sites in Spain, Greece and Ireland. The guaranteed savings model appears to be the most appropriate one to use when the building owner is funding the energy efficiency project using own funds or liaising directly with a bank or other finance provider. The validation method for the comparative analysis of business models and selection of the most appropriate one is based on both literature review and consultation of selected stakeholders' (stakeholder value creation framework).

Acute respiratory distress syndrome: A study of autopsy findings.

CONTEXT: In this autopsy study, the various morphological patterns of acute respiratory distress syndrome (ARDS) have been analyzed and compared along with their etiopathogenesis. AIMS: We aimed to study the prevalence and clinicopathological correlation of ARDS based on age, gender, hospital stay, symptoms, clinical diagnosis, gross, and microscopy findings. SUBJECTS AND METHODS: Total 130 cases of ARDS were studied over a period of 5 years. Age, gender, hospital stay duration, symptoms, clinical diagnosis, gross and microscopic lung finding, clinicopathological correlation, and cause of death were documented and analyzed. Special stains were done whenever required. STATISTICAL ANALYSIS: This is an observational study, and simple statistics such as mean, median, and standard deviation have been used for continuous variables. RESULTS: The prevalence of ARDS among the adult autopsy was 6.05%. Majority of the cases were in the age group of 18-30 years (36.9%), with a male: female ratio of 1.7:1. Chief complaints were fever (71%), breathlessness (54.6%), and chills (43.8%). The main clinical diagnoses were ARDS (41.6%), sepsis (28.3%), acute febrile illness (17%), and lower respiratory tract infection (12.5%). Most of the patients had a hospital stay of <1 day. Associated conditions mostly included chronic alcoholism (16.1%), pregnancy (16.1%), and chronic smoking (10.7%). Major findings on gross examination were intrapulmonary hemorrhage (38.5%), ARDS (33%), pulmonary edema (13%), and pneumonia (15.3%).On microscopy, major findings were hyaline membrane (84.6%), intrapulmonary hemorrhage (76.1%), pulmonary edema (75.3%), organizing fibrin (55.3%), and bronchopneumonia (36.2%). CONCLUSION: Infections were one of the major predisposing causes of ARDS. Due to the short interval, the underlying cause for ARDS often goes undiagnosed.

Tryptophan-metabolizing gut microbes regulate adult neurogenesis via the aryl hydrocarbon receptor.

While modulatory effects of gut microbes on neurological phenotypes have been reported, the mechanisms remain largely unknown. Here, we demonstrate that indole, a tryptophan metabolite produced by tryptophanase-expressing gut microbes, elicits neurogenic effects in the adult mouse hippocampus. Neurogenesis is reduced in germ-free (GF) mice and in GF mice monocolonized with a single-gene tnaA knockout (KO) mutant Escherichia coli unable to produce indole. External administration of systemic indole increases adult neurogenesis in the dentate gyrus in these mouse models and in specific pathogen-free (SPF) control mice. Indole-treated mice display elevated synaptic markers postsynaptic density protein 95 and synaptophysin, suggesting synaptic maturation effects in vivo. By contrast, neurogenesis is not induced by indole in aryl hydrocarbon receptor KO (AhR-/-) mice or in ex vivo neurospheres derived from them. Neural progenitor cells exposed to indole exit the cell cycle, terminally differentiate, and mature into neurons that display longer and more branched neurites. These effects are not observed with kynurenine, another AhR ligand. The indole-AhR-mediated signaling pathway elevated the expression of ß-catenin, Neurog2, and VEGF-α genes, thus identifying a molecular pathway connecting gut microbiota composition and their metabolic function to neurogenesis in the adult hippocampus. Our data have implications for the understanding of mechanisms of brain aging and for potential next-generation therapeutic opportunities.

Current understanding of the inhibition factors and their mechanism of action for the lignocellulosic biomass hydrolysis.

Biorefining of lignocellulosic biomass is a relatively new concept but it has strong potential to develop and partially replace the fossil derived fuels and myriad of value products to subsequently reduce the greenhouse gas emissions. However, the energy and cost intensive process of releasing the entrapped fermentable sugars is a major challenge for its commercialization. Various factors playing a detrimental role during enzymatic hydrolysis of biomass are inherent recalcitrance of lignocellulosic biomass, expensive enzymes, sub-optimal enzyme composition, lack of synergistic activity and enzyme inhibition caused by various inhibitors. The current study investigated the mechanism of enzyme inhibition during lignocellulosic biomass saccharification especially at high solid loadings. These inhibition factors are categorized into physio-chemical factors, water-soluble and -insoluble enzyme inhibitors, oligomers and enzyme-lignin binding. Furthermore, different approaches are proposed to alleviate the challenges and improve the enzymatic hydrolysis efficiency such as supplementation with surfactants, synergistic catalytic/non-catalytic proteins, and bioprocess modifications.

Post Vaccination Epidemiology and Genotyping of Rotavirus Gastroenteritis at a Tertiary Care Centre of North-East Rajasthan.

OBJECTIVES: To estimate the proportion of rotavirus diarrhea among hospitalized children aged under-five years, to determine the circulating rotavirus genotypes and to know impact rotavirus vaccine on prevalence and severity of rotavirus diarrhea. METHODS: This study was a hospital based cross-sectional observational study conducted over a period of 29 mo (September 2017 through January 2020). Stool samples were collected from children who fall within the age range of 0-59 mo with acute diarrhea attending emergency or needing admission. Stool samples were tested for rotavirus by the enzyme linked immune-sorbent assay (ELISA) and genotyped using published methods. RESULTS: Out of 1480 samples, 360 (24.32%) cases were positive for rotavirus by ELISA, majority of them were male (62.97%). Maximum rotavirus positivity was found in the age group of <11 mo (55.27%). Statistically significance difference was seen in episodes of diarrhea and experience of vomiting in rotavirus diarrhea cases. Highest prevalence has been seen during winter season. The most prevalent G and P type combinations were G3P [8] strains [122 (34.08%)], G2P [4] [83 (23.18%)], G1P [8] [27 (7.54%)] and G9P [4] [20 (5.59%)]. Mixed strains contribute a significant proportion of stool sample. CONCLUSIONS: Rotavirus is an important cause of diarrhea in hospitalized children. There is continued circulation of G9 and G12 strains and the emergence of G3P [8] as most common strain.