Origanum vulgare manganese ferrite nanocomposite: An advanced multifunctional hybrid material for dye remediation.

The purpose of the study was to fabricate sustainable and cost-effective material for the thorough cleansing of polluted water. In this context, an economical, phytogenic and multifunctional Origanum vulgare plant-based nanocomposite material, MnFe2O4/OV, was prepared via one-pot synthetic technique. The synthesized nanocomposite with a band gap of 2.02 eV behaved as an efficient nano-photocatalyst for the degradation of both cationic (crystal violet) and anionic (congo red) dyes under direct sunlight irradiation. The material also inhibited the growth of E. coli and S. aureus bacteria and simultaneously adsorbed both cationic and anionic dyes from water through adsorption. A variety of techniques have been used to characterize the nanocomposite, including X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). Additionally, the kinetics of photodegradation of the aforementioned organic dyes has also been investigated. The MnFe2O4/OV exhibited excellent photocatalytic performance, leading to 43% and 72% degradation within 3 h at rate constants of 2.0 × 10-3 min-1 and 6.0 × 10-3 min-1 for crystal violet and congo red, respectively. The crystal violet and congo red were used to testify to the composite's potential for adsorption under the influence of several process variables, including initial solution pH, contact time, temperature, initial dye concentration, and amount of MnFe2O4/OV. The Langmuir maximum adsorption capacity Qmax as in the range 14.06-14.59 mgg-1 for crystal violet and 34.45-23.93 mgg-1 for congo red at pH 7 within 90 min contact time in the temperature range of 30-50 °C. The phenomenon of adsorption was found feasible and endothermic at all the investigated temperatures. Also, E. coli and S. Aureus bacteria have shown growth suppression activity when exposed to MnFe2O4/OV.As a result, the synthesized nanocomposite, MnFe2O4/OV, proved to be an antimicrobial, multifunctional novel nanocomposite, which is in high demand, and could serve as an affordable, and sustainable material for comprehensive water filtration.

Synthesis, purification and characterization of Plectonema derived AgNPs with elucidation of the role of protein in nanoparticle stabilization.

Driven by the need to biosynthesize alternate biomedical agents to prevent and treat infection, silver nanoparticles have surfaced as a promising avenue. Cyanobacteria-derived nanomaterial synthesis is of substantive interest as it offers an eco-friendly, cost-effective, sustainable, and biocompatible route for further development. In the present study optimal conditions for synthesis of silver nanoparticles (AgNPs) were 1 : 9 v/v [cell extract: AgNO3 (1 mM)], pH 7.4, and 30 °C reaction temperatures. Synthesis of nanoparticles was monitored by UV-vis spectrophotometry and the maximum absorbance was observed at a wavelength of 420 nm. SEM with EDX analysis confirmed 96.85% silver by weight which revealed the purity of AgNPs. TEM & XRD analysis exhibited a particle size of ∼12 nm with crystalline nature. FTIR analysis confirmed the presence of possible biomolecules involved in the synthesis and stabilization of AgNPs. Decapping of AgNPs followed by SDS-PAGE, LCMS and MALDI TOF analysis elucidates the proteinaceous nature of the capping and stabilizing agent. Cyanobacterial-derived capped AgNPs showed more cytotoxicicity towards a non-small cell lung cancer (A549) cell line, free radical scavenger and an antimicrobial than de-capped AgNPs. In addition they showed significant synergistic characteristics with antibiotics and fungicides. The test revealed that the capped AgNPs were biocompatible with good anti-inflammatory properties. The blend of antimicrobial and biocompatible properties, coupled with their intrinsic "green" and facile synthesis, made these biogenic nanoparticles particularly attractive for future applications in nanomedicine.

Screening, characterisation and bioactivities of green fabricated TiO2 NP via cyanobacterial extract.

The present study was aimed at exploring 37 strains of cyanobacteria for the biofabrication of TiO2 NP and evaluation of their antioxidant, antifungal, antibacterial and hemolytic activity. Screening of cyanobacterial strains was done via SEM, followed by optimisation and characterisation of the best strain. Synechocystis NCCU-370 appeared as the best strain for the synthesis of TiO2 NP in terms of size (73.39 nm) and time (24 h) after screening. Following optimisation, nanoparticles were synthesised in 12 h having an average grain size of 16 nm. The aqueous extract preparation required heating of 5 mg/ml of powdered biomass to 60 °C for 10 min. Optimum conditions for the synthesis of TiO2 NP were found to be pH 7, 30 °C and 12-h cell extract exposure to 0.1 mM of salt. Antioxidant activity was evaluated via DPPH, ABTS and FRAP assay. Antifungal potential was explored against Candida albicans (MIC = 125 µg/ml), Candida glabrata (MIC = 500 µg/ml) and Candida tropicalis (MIC = 250 µg/ml), whereas antibacterial potential was gauged for Bacillus cereus (MIC = 31.25 µg/ml), Escherichia coli (MIC = 31.25 µg/ml) and Klebsiella pneumoniae (MIC = 500 µg/ml) strains. Biogenic TiO2 NP demonstrated partial synergistic effect and excellent biocompatibility.

Fabrication of metal incorporated polymer composite: An excellent antibacterial agent.

US Food and Drug Administration (FDA) allowed for direct addition of castor oil for human consumption as food and most recently FDA approved castor oil as over-the-counter (OTC) for laxative drug. The present article highlights the green route phosphorylation of castor oil (COL) via condensation polymerization. Further, the incorporation of metal ions Cu (II)) and Zn (II) into the polymer matrix have been carried out at elevated temperature using catalyst p-toluene sulphonic acid (PTSA). The modification of the said material has been confirmed by FT-IR, UV-VIS, and 1H and 31P-NMR spectroscopy. Further, the in vitro antibacterial activities of the metal incorporated-COL has been performed by standard methods against B. cereus (MCC2243) (gram-positive) and E. coli (MCC2412) (gram-negative) bacteria. The results revealed that the incorporation of metal ions into the polymer matrix increases the antibacterial activity largely. This may be governed by the electrostatic interaction between metal ions and microbes, also the generation of free active oxygen hinders the normal activity of bacteria. These results suggest that the synthesized material may act a potential candidate for low cost, environment friendly antibacterial agents and may find their application in clinical fields. Herein we are also proposing mechanism of antibacterial activity.

Antibiofilm Activities of Biogenic Silver Nanoparticles Against Candida albicans.

Biofilms are microbial colonies that are encased in an organic polymeric matrix and are resistant to antimicrobial treatments. Biofilms can adhere to both biotic and abiotic surfaces, allowing them to colonize medical equipment such as urinary and intravenous catheters, mechanical heart valves, endotracheal tubes, and prosthetic joints. Candida albicans biofilm is the major etiological cause of the pathogenesis of candidiasis in which its unobstructed growth occurs in the oral cavity; trachea, and catheters that progress to systemic infections in the worst scenarios. There is an urgent need to discover novel biofilm preventive and curative agents. In the present investigation, an effort is made to observe the role of cyanobacteria-derived AgNPs as a new antibiofilm agent with special reference to candidiasis. AgNPs synthesized through the green route using Anabaena variabilis cell extract were characterized by UV-visible spectroscopy. The nanoparticles were spherical in shape with 11-15 nm size and were monodispersed. The minimum inhibitory concentration (MIC) of AgNPs was obtained at 12.5 µg/mL against C. albicans. AgNPs 25 µg/mL showed 79% fungal cell membrane permeability and 22.2% ROS production. AgNPs (25 µg/mL) also facilitated 62.5% of biofilm inhibition and degradation. Therefore, AgNPs could be considered as a promising antifungal agent to control biofilm produced by C. albicans.

Biofabricated platinum nanoparticles: therapeutic evaluation as a potential nanodrug against breast cancer cells and drug-resistant bacteria.

Use of plant extracts for the synthesis of various metal nanoparticles has gained much importance recently because it is a simple, less hazardous, conservative and cost-effective method. In this research work, platinum nanoparticles were synthesized by treating platinum ions with the leaf extract of Psidium guajava and their structural properties were studied using various characterization techniques. The formation of platinum nanoparticles was confirmed by the disappearance of the absorbance peak at 261 nm in UV-visible spectra. The results of gas chromatography-mass spectrometry (GC-MS) and Fourier transform infrared spectroscopy (FT-IR) analysis showed functional moieties responsible for bio-reduction of metal ions and stabilization of platinum nanoparticles. The use of dynamic light scattering (DLS) imaging techniques confirmed the formation of stable monodispersed platinum nanoparticles showing a zeta potential of -23.4 mV. The morphological examination using high resolution transmission electron microscopy (HR-TEM) and Scanning electron microscopy (SEM) confirmed the formation of spherical platinum nanoparticles with an average diameter of 113.2 nm. X-ray powder diffraction (XRD) techniques showed the crystalline nature of biosynthesized platinum nanoparticles with a face-centered cubic structure. The results of energy-dispersive X-ray spectroscopy (EDAX) showed 100% platinum content by weight confirming the purity of the sample. The cytotoxic effect of biosynthesized platinum nanoparticles assessed in a breast cancer (MCF-7) cell-line by a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, revealed an IC50 of 167.2 µg ml-1. The results of a wound healing assay showed that treatment with platinum nanoparticles induced an anti-migratory effect on MCF-7 cells. In the cell cycle phase distribution, treatment with platinum nanoparticles inhibited cell proliferation as determined by flow cytometry with PI staining. Significant cell cycle arrest was detected at the G0/G1 phase with a notable decrease in the distribution of cells in the S and G2/M phases. The anti-bacterial activity of bio-synthesized platinum nanoparticles was evaluated against four pathogenic bacteria i.e. B. cereus (Gram positive), P. aeruginosa (Gram negative), K. pneumonia (Gram negative) and E. coli (Gram negative). The biosynthesized platinum nanoparticles were found to show dose-dependent inhibition against pathogenic bacteria with a significant effect on Gram-negative bacteria compared to Gram-positive bacteria. This synergistic blend of green and simplistic synthesis coupled with anti-proliferative and anti-bacterial properties makes these biogenic nanoparticles suitable in nanomedicine.