RESUMO
Two markers on Chromosome 2 of chickpea (Cicer arietinum ) are reportedly associated with resistance to race 4 Fusarium wilt, and are frequently used in breeding. However, the genes in this region that actually confer wilt resistance are unknown. We aimed to characterise them using both in silico approaches and marker trait association (MTA) analysis. Of the 225 protein-encoding genes in this region, 51 showed significant differential expression in two contrasting chickpea genotypes under wilt, with potential involvement in stress response. From a diverse set of 244 chickpea genotypes, two sets of 40 resistant and 40 susceptible genotypes were selected based on disease incidence and amplification pattern of the TA59 marker. All cultivars were further genotyped with 1238 single nucleotide polymorphisms (SNPs) specific to the 51 genes; only seven SNPs were significantly correlated with disease. SNP Ca2_24099002, specific to the LOC101498008 (Transmembrane protein 87A) gene, accounted for the highest phenotypic variance for disease incidence at 16.30%, whereas SNPs Ca2_25166118 and Ca2_27029215, specific to the LOC101494644 (ß-glucosidase BoGH3B-like) and LOC101505289 (Putative tRNA pseudouridine synthase) genes, explained 10.51% and 10.50% of the variation, respectively, in the sets with contrasting disease susceptibility. Together with the TA59 and TR19 markers, these SNPs can be used in a chickpea breeding scheme to develop wilt resistance.
Assuntos
Cicer , Resistência à Doença , Fusarium , Doenças das Plantas , Polimorfismo de Nucleotídeo Único , Cicer/genética , Cicer/microbiologia , Doenças das Plantas/microbiologia , Doenças das Plantas/genética , Doenças das Plantas/imunologia , Resistência à Doença/genética , Cromossomos de Plantas/genética , Genótipo , Genes de PlantasRESUMO
Nano-zerovalent iron (nZVI) is a promising material for the removal of both organic and inorganic pollutants from contaminated water. This study investigates the potential of a novel composite of nZVI on a polymer-derived supporting ceramic (nZVI-PDC) synthesized via the liquid-phase reduction method for the simultaneous adsorption and Fenton-type reduction of bromate anion (BrO3-) in water. The nZVI nanoparticles were effectively anchored onto the PDC by impregnating high-yield carbon in a ferrous sulfate solution. The PDC facilitated the uniform dispersion of nZVI nanoparticles due to its multiple active sites distributed within mesocarbon cavities. The developed nZVI-PDC composite exhibited a high specific surface area of 837 m2 g-1 and an ordered mesoporous structure with a pore volume of 0.37 cm3 g-1. As an adsorbent, the nZVI-PDC composite exhibited a maximum adsorption capacity (qe) of 842 mg g-1 and a partition coefficient (KH) of 10.2 mg g-1 µM-1, as calculated by the pseudo-second-order model. As a catalyst, the composite demonstrated a reaction kinetic rate of 43.5 µmol g-1 h-1 within 6 h at pH 4, using a dosage of 60 mg L-1 nZVI-PDC and a concentration of 0.8 mmol L-1 H2O2. Comparatively, PDC exhibited a qe of 408 mg g-1, KH of 1.67 mg g-1 µM-1, and a reaction rate of 20.8 µmol g-1 h-1, while nZVI showed a qe of 456 mg g-1, KH of 2.30 mg g-1 µM-1, and a reaction rate of 27.2 µmol g-1 h-1. The modelling indicated that the nZVI-PDC composite followed pseudo-second-order kinetics. The remarkable removal efficiency of the nZVI-PDC composite was attributed to the synergistic effects between PDC and nZVI, where PDC facilitated charge transfer, promoting Fe2+ generation and the Fe3+/Fe2+ cycle. Overall, this work introduces a promising adsorption technology for the efficient removal of BrO3- from contaminated aqueous solutions, highlighting the significant potential of the nZVI-PDC composite in water purification applications.
Assuntos
Bromatos , Cerâmica , Ferro , Poluentes Químicos da Água , Ferro/química , Adsorção , Poluentes Químicos da Água/química , Cerâmica/química , Bromatos/química , Purificação da Água/métodos , Peróxido de Hidrogênio/química , Polímeros/química , Oxirredução , Nanopartículas Metálicas/químicaRESUMO
The use of nanotechnology in terms of nanoparticles, carbon nanotubes, and quantum dots, when exposed to the plants, helps increase their productivity. It is worth the effort to comprehend the fate of these nanoparticles in plants. Bonechar derived from bones is a rich source of C, P, Ca2+, and Mg2+ nutrients, which can significantly contribute to the growth of the plants. This study focused on the uptake of nano-bonechar (NBC) in the Syngonium podophyllum plant, and its effects on plant growth under hydroponics and soil systems. The compound microscopy and SEM-EDX results confirmed the presence of NBC in the leaves and roots of the plants in hydroponics and soil systems. The FTIR spectra reflected the presence of functional groups of the NBC in the leaves of the Syngonium podophyllum plant. The plant's growth parameters showed an increase in fresh weight, dry weight, shoot length, chlorophyll content, leaf count, total Ca2+, total PO43-, and total organic carbon of plants in both systems. The NBC not just improved plant physiochemical parameters but also built up the soil quality in terms of bioavailable Ca2+, PO43-, water holding capacity, and soil organic matter. It is concluded that the production of carbon-based NBC not only helps manage bone waste but also their efficient uptake in plants significantly improving plant productivity.
Assuntos
Hidroponia , Solo , Solo/química , Reguladores de Crescimento de Plantas/metabolismo , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/metabolismo , Folhas de Planta/crescimento & desenvolvimento , Folhas de Planta/metabolismo , Nutrientes/metabolismo , Nanopartículas/químicaRESUMO
Extreme climates and the unpredictability of the weather are significant obstacles to agricultural productivity. This study is the first attempt to explore the capacity of nanobonechar (NBC) for promoting climate-smart agriculture. A pot experiment was performed on maize (Zea mays L.) under a deficit irrigation system (40, 70, and 100% irrigation rates) using different soil application rates of the NBC (0, 0.5, 1, and 2% wt/wt). Additionally, the CO2-C efflux rate and cumulative CO2-C were measured in an incubation experiment. The results indicated the best performance of the 1% NBC treatment under a 70% irrigation rate in terms of the fresh and dry weights of maize plants. Total PO43- and Ca2+ were significantly higher in the plants grown in the NBC-amended soil as compared to the control, showing a gradual increase with an increase in the NBC application rate. The improved productivity of maize plants under a deficit irrigation system was associated with enhanced water-holding capacity, organic matter, and bioavailability of cations (Ca2+, K+, and Na+) and anions (PO43- and NO3-) in the soils amended with NBC. The CO2-C efflux rate and cumulative CO2-C emissions remain higher in the NBC-amended soil than in the un-amended soil, pertaining to the high contents of soil organic matter emanating from the NBC. We conclude that NBC could potentially be used as a soil amendment for promoting maize growth under a water stress condition.
Assuntos
Agricultura , Dióxido de Carbono , Dióxido de Carbono/análise , Solo , Clima , Zea maysRESUMO
Fluoride ion (F-) is one of the major geogenic contaminants in water and soil. Excessive consumption of these geogenic contaminants poses serious health impacts on humans and plants. In this study, a novel carbonaceous material, nano-bonechar, was synthesized from cow bones and applied as a soil amendment at rates of 0, 0.5, 1, and 2% to remediate and revitalize naturally F--contaminated soil. The results revealed that the nano-bonechar significantly reduced the mobility and bioavailability of F- by 90% in the contaminated soil, and improved the soil quality by increasing the soil water holding capacity, soil organic matter, and the bioavailable contents of PO43-, Ca2+, and Na+. Subsequently, the pot experiment results showed a significant reduction in the uptake of F- by 93% in Zea mays plants. Moreover, the nano-bonechar application improved the plant's growth, as indicated by the higher fresh and dry weights, root and shoot lengths, and total content of PO43-, Ca2+, and K+ than those of un-amended soil. The F-immobilization in soil was mainly due to the presence of the hydroxyapatite [Ca10(PO4)6(OH)2] mineral in the nano-bonechar. Ion exchange between OH- (of nano-bonechar) and F- (of soil), and the formation of insoluble fluorite (CaF2) contributed to the attenuation of F- mobility in the soil. It is concluded that nano-bonechar, due to its size and enrichment in hydroxyapatite, could successfully be utilized for the rapid remediation and revitalization of F--contaminated agricultural soil.
Assuntos
Fluoretos , Poluentes do Solo , Humanos , Poluentes do Solo/análise , Solo , Água , HidroxiapatitasRESUMO
Arsenic (As) poisoning in groundwater and rice paddy soil has increased globally, impacting human health and food security. There is an urgent need to deal with As-contaminated groundwater and soil. Biochar can be a useful remedy for toxic contaminants. This study explains the synthesis of pinecone-magnetic biochar (PC-MBC) by engineering the pinecone-pristine biochar with iron salts (FeCl3.6H2O and FeSO4.7H2O) to investigate its effects on As(V) adsorption and immobilization in water and soil, respectively. The results indicated that PC-MBC can remediate As(V)-contaminated water, with an adsorption capacity of 12.14 mg g-1 in water. Isotherm and kinetic modeling showed that the adsorption mechanism involved multilayer, monolayer, and diffusional processes, with chemisorption operating as the primary interface between As(V) and biochar. Post-adsorption analysis of PC-MBC, using FTIR and XRD, further revealed chemical fixing and outer-sphere complexation between As(V) and Fe, O, NH, and OH as the main reasons for As(V) adsorption onto PC-MBC. Recycling of PC-MBC also had excellent adsorption even after several regeneration cycles. Similarly, PC-MBC successfully immobilized As in paddy soil. Single and sequential extraction results showed the transformation of mobile forms of As to a more stable form, confirmed by non-destructive analysis using SEM, EDX, and elemental dot mapping. Thus, Fe-modified pine-cone biochar could be a suitable and cheap adsorbent for As-contaminated water and soil.
Assuntos
Arsênio , Carvão Vegetal , Água Subterrânea , Poluentes do Solo , Poluentes Químicos da Água , Humanos , Arsênio/análise , Adsorção , Poluentes do Solo/análise , Água , Poluição da Água/análise , Solo , Fenômenos Magnéticos , Poluentes Químicos da Água/análiseRESUMO
This study examines the validity of the environmental Kuznets curve (EKC) hypothesis and the role of environmental regulation, renewable electricity, industrialization, economic complexity, and technological innovation in sustainable environment for the G-10 economies, namely, Belgium, Canada, Germany, Italy, Japan, Netherlands, Sweden, Switzerland, the United Kingdom, and the USA, from 1994 to 2020. We employed CS-ARDL (cross-sectional augmented distributed lag (CS-ARDL), FMOLS (fully modified ordinary least squares), and DOLS (dynamic ordinary least squares) for the analysis of the data. The estimates confirm the N-shaped EKC hypothesis between the GDP and CO2 emission. Moreover, the long-run estimates exhibit that environmental tax, renewable electricity, economic complexity, and technological innovation have negative effect on CO2 emission, while GDP, industrialization and arable land have positive effect on CO2 emission. Based on these findings, we propose that governments must implement large-scale government plans and initiatives to encourage the development of environmentally friendly technologies and ideas based on renewable energy. Moreover, further growing renewable energy, environmental policies like a carbon tax, investments in green technologies, subsidies, and rewards for renewable energy infrastructure investment should be taken into account.
Assuntos
Desenvolvimento Industrial , Invenções , Desenvolvimento Econômico , Dióxido de Carbono , Estudos Transversais , Energia RenovávelRESUMO
Antimony (Sb-V), a carcinogenic metalloid, is becoming prevalent in water and soil due to anthropogenic activities. Biochar could be an effective remedy for Sb(V)-contaminated water and soil. In this study, we used pristine and engineered pinecone-derived biochar as an innovative approach for treating Sb(V)-contaminated water and shooting range soil. Biochar was produced from pine-cone waste (pristine biochar) and enriched with Fe and Al salts via saturation (engineered biochar). Adsorption tests in water revealed that iron-modified biochar showed higher adsorption capacity (8.68 mg g-1) than that of the pristine biochar (2.49 mg g-1) and aluminum-modified biochar (3.40 mg g-1). Isotherm and kinetic modeling of the adsorption data suggested that the adsorption process varied from monolayer to multilayer, with chemisorption as the dominant interaction mechanism between Sb(V) and the biochars. The post-adsorption study of iron-modified biochar by Fourier Transform Infrared (FTIR) and X-ray diffraction (XRD) further supported the chemical bonding and outer-sphere complexation of Sb(V) with Fe, N-H, O-H, C-O and CC components. The pristine and iron-modified biochars also successfully immobilized Sb(V) in a shooting range soil, more so in the latter. Subsequent sequential extractions and post-analysis by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and elemental dot mapping revealed that Sb in the treated soil transformed to a more stable form. It was concluded that iron-modified biochar could act as an efficient material for the adsorption and immobilization of Sb(V) in water and soil, respectively.
Assuntos
Militares , Poluentes Químicos da Água , Humanos , Antimônio/análise , Solo , Adsorção , Carvão Vegetal , Ferro/análise , Água/análise , Cinética , Poluentes Químicos da Água/análiseRESUMO
Soil acidification in managed ecosystems such as agricultural lands principally results from the increased releasing of protons (H+) from the transformation reactions of carbon (C), nitrogen (N) and sulphur (S) containing compounds. The incorporation of liming materials can neutralize the protons released, hence reducing soil acidity and its adverse impacts to the soil environment, food security, and human health. Biochar derived from organic residues is becoming a source of carbon input to soil and provides multifunctional values. Biochar can be alkaline in nature, with the level of alkalinity dependent upon the feedstock and processing conditions. This review covers the fundamental aspects of soil acidification and of the use of biochar to address constraints related to acidic soil. Biochar is increasingly considered as an effective soil amendment for reducing soil acidity owing to its liming potential, thereby enhancing soil fertility and productivity in acid soils. The ameliorant effect on acid soils is mainly because of the dissolution of carbonates, (hydro)-oxides of the ash fraction of biochar and potential use by microorganisms.
Assuntos
Ecossistema , Solo , Humanos , Solo/química , Prótons , Carvão Vegetal/química , Carbono/química , Óxidos , Ácidos , Concentração de Íons de HidrogênioRESUMO
Introduction: The yield of chickpea is severely hampered by infection wilt caused by several races of Fusarium oxysporum f. sp. ciceris (Foc). Methods: To understand the underlying molecular mechanisms of resistance against Foc4 Fusarium wilt, RNA sequencing-based shoot transcriptome data of two contrasting chickpea genotypes, namely KWR 108 (resistant) and GL 13001 (susceptible), were generated and analyzed. Results and Discussion: The shoot transcriptome data showed 1,103 and 1,221 significant DEGs in chickpea genotypes KWR 108 and GL 13001, respectively. Among these, 495 and 608 genes were significantly down and up-regulated in genotypes KWR 108, and 427 and 794 genes were significantly down and up-regulated in genotype GL 13001. The gene ontology (GO) analysis of significant DEGs was performed and the GO of the top 50 DEGs in two contrasting chickpea genotypes showed the highest cellular components as membrane and nucleus, and molecular functions including nucleotide binding, metal ion binding, transferase, kinase, and oxidoreductase activity involved in biological processes such as phosphorylation, oxidation-reduction, cell redox homeostasis process, and DNA repair. Compared to the susceptible genotype which showed significant up-regulation of genes involved in processes like DNA repair, the significantly up-regulated DEGs of the resistant genotypes were involved in processes like energy metabolism and environmental adaptation, particularly host-pathogen interaction. This indicates an efficient utilization of environmental adaptation pathways, energy homeostasis, and stable DNA molecules as the strategy to cope with Fusarium wilt infection in chickpea. The findings of the study will be useful in targeting the genes in designing gene-based markers for association mapping with the traits of interest in chickpea under Fusarium wilt which could be efficiently utilized in marker-assisted breeding of chickpea, particularly against Foc4 Fusarium wilt.
RESUMO
Drinking fluoride (F-)-contaminated water (>1.5 mg L-1) causes severe dental and skeletal disorders. In the central province of Pakistan, â¼20 times higher levels of F- in the drinking groundwater (compared with the 1.5 mg L-1 permissible limit of the World Health Organization) are triggering bone abnormalities in teenagers. In this study, we demonstrated the potential of pinecone-derived biochar (pristine) impregnated with Fe- and Al-salts (engineered) to defluoridate water. Batch mode adsorption experiments were carried out under variable conditions of solution pH, F- initial concentration, adsorbent dose, and contact time. The engineered biochars resulted in greater adsorption than that of pristine biochar. Specifically, the AlCl3-modified biochar exhibited a maximum adsorption capacity of 14.07 mg g-1 in spiked water and 13.07 mg g-1 in in-situ groundwater. The equilibrium isothermal and kinetic models predicted monolayer, cooperative, and chemisorption types of the adsorption process. The chemical interaction and outer-sphere complexation of F- with Al, Na, and H elements were further confirmed by the post-adsorption analysis of the AlCl3-modified biochar by FTIR and XRD. The AlCl3-modified biochar resulted in 87.13% removal of F- from the in-situ F--contaminated groundwater, even in the presence of naturally occurring competing ions (such as Cl-, HCO3-, SO42-, and NO3-). We conclude that the AlCl3-modified biochar derived from pinecone could be a promising cost-effective adsorbent for the defluoridation of water.
Assuntos
Fluoretos , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Cinética , Água , Poluentes Químicos da Água/análiseRESUMO
Biochar modification by metal/metal oxide is promising for improving its adsorption capability for contaminants, especially the anions. However, conventional chemical modifications are complicated and costly. In this study, novel Fe/Fe oxide loaded biochars (RMBCs) were synthesized from a one-step co-pyrolysis of red mud (RM) and shaddock peel (SP), and their potential application for removing anionic azo dye (acid orange 7, AO7) from the aqueous environment was evaluated. Fe from red mud was successfully loaded onto biochars pyrolyzed at 300-800 °C, which presented from oxidation form (Fe2O3) to the reduction forms (FeO and Fe0) with increasing pyrolysis temperature. The RMBC produced at 800 °C with RM:SP mass ratio of 1:1 (RMBC8001:1) exhibited the best capability for AO7 removal (â¼32 mg/g), attributed to both adsorption and degradation. The higher surface area of RMBC8001:1 and its greater affinity for AO7 led to the higher adsorption. In addition, RMBC8001:1-induced degradation of AO7 was another key mechanism for AO7 removal. The reduction forms of Fe (FeO or Fe0) in RMBC8001:1 may provide electrons for breaking down the azo bond in AO7 molecules and result in degradation, which is further enhanced in acid conditions due to the participation of readily release of Fe2+ and the available H+ in AO7 degradation. Furthermore, RMBC8001:1 can be easily separated from the treated water by using magnetic field, which significantly benefits its separation in wastewater treatment.
Assuntos
Pirólise , Poluentes Químicos da Água , Adsorção , Compostos Azo , Benzenossulfonatos , Carvão Vegetal/química , Água , Poluentes Químicos da Água/análiseRESUMO
The contamination of natural resources by hexavalent chromium (Cr(VI)) originating from natural and anthropogenic activities is a serious environmental concern. Although many articles on chromium remediation have been published, a comprehensive understanding of the mechanisms involved in remediation with different sorbents is not yet available. In this systematic review, the performance and applicability of several adsorptive materials for Cr(VI) removal from aqueous media are discussed, along with a detailed analysis of the mechanisms involved. Statistical analysis is applied to compare the efficacies of different adsorbents, while a similar approach is used to determine the effects of sorbent properties and experimental conditions on the adsorption capacity. A detailed analysis of the factors involved in fixed-bed column studies is also presented. A suitable desorption approach to the regeneration of the spent adsorbent and its adsorption performance in reuse is also examined. Among the different sorbents, nanoparticles and mineral-doped biochar were found to be the most effective sorbents, while the adsorption was higher at low pH (~4.0) than that at intermediate pH (6-8). Contrary to our expectation, adsorption was high for sorbents with low specific surface areas, suggesting that the adsorption of Cr(VI) is largely influenced by the chemical properties of the sorbents. The optimum adsorption in fixed-bed column systems is obtained at a lower Cr(VI) ion concentration, a lower influent flow rate, and a higher bed height. Since most of the studies reviewed herein were merely experimental and utilized ideal conditions with the presence of a single contaminant, i.e. Cr(VI) in water, further studies on adsorption dynamics with the presence of other interfering ions are suggested. This review is promising for the further development of Cr(VI) removal strategies and closes the research gaps pertaining to their challenges.
Assuntos
Efeitos Antropogênicos , Poluentes Químicos da Água , Adsorção , Cromo , Concentração de Íons de Hidrogênio , Cinética , Água , Poluentes Químicos da Água/análiseRESUMO
Hexavalent chromium (Cr[VI]) is one of the major environmental concerns due to its excessive discharge through effluents from the leather tanning industry. Peanut production leads to the generation of residual shells as waste calling for sustainable disposal. In this study, we employed an innovative approach of applying peanut-shell-derived pristine and engineered biochar for the remediation of Cr-contaminated wastewater and soil. The peanut shell waste was converted to biochar, which was further engineered with cetyltrimethylammonium bromide (CTAB, a commonly used cationic surfactant). The biochars were then used for the adsorption and immobilization of Cr(VI) in water and soil, respectively. The adsorption experiments demonstrated high Cr(VI) removal efficiency for the engineered biochar (79.35%) compared with the pristine biochar (37.47%). The Langmuir model best described the Cr(VI) adsorption onto the biochars (R2 > 0.97), indicating monolayer adsorption. Meanwhile, the adsorption kinetics indicated that chemisorption was the dominant mechanism of interaction between the Cr(VI) and the biochars, as indicated by the best fitting to the pseudo-second-order model (R2 > 0.98). Adsorption through the fixed-bed column also presented higher Cr(VI) adsorption onto the engineered biochar (qeq = 22.93 mg g-1) than onto the pristine biochar (qeq = 18.54 mg g-1). In addition, the desorption rate was higher for the pristine biochar column (13.83 mg g-1) than the engineered biochar column (10.45 mg g-1), indicating that Cr(VI) was more strongly adsorbed onto the engineered biochar. A higher immobilization of Cr(VI) was observed in the soil with the engineered biochar than with the pristine biochar, as was confirmed by the significant decreases in the Cr(VI) bioavailability (92%), leachability (100%), and bioaccessibility (97%) compared with the control (soil without biochar). The CTAB-engineered biochar could thus potentially be used as an efficient adsorbent for the removal and the immobilization of Cr(VI) in water and soil, respectively.
Assuntos
Arachis , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Cromo , Cinética , Solo , Água , Poluentes Químicos da Água/análiseRESUMO
This review focuses on existing technologies for carcass and corpse disposal and potential alternative treatment strategies. Furthermore, key issues related to these treatments (e.g., carcass and corpse disposal events, available methods, performances, and limitations) are addressed in conjunction with associated environmental impacts. Simultaneously, various treatment technologies have been evaluated to provide insights into the adsorptive removal of specific pollutants derived from carcass disposal and management. In this regard, it has been proposed that a low-cost pollutant sorbent may be utilized, namely, biochar. Biochar has demonstrated the ability to remove (in)organic pollutants and excess nutrients from soils and waters; thus, we identify possible biochar uses for soil and water remediation at carcass and corpse disposal sites. To date, however, little emphasis has been placed on potential biochar use to manage such disposal sites. We highlight the need for strategic efforts to accurately assess biochar effectiveness when applied towards the remediation of complex pollutants produced and circulated within carcass and corpse burial systems.
RESUMO
BACKGROUND: The therapeutic management of carbapenem-resistant Acinetobacter baumannii (CR-AB) represents a serious challenge to the public health sector because these pathogens are resistant to a wide range of antibiotics, resulting in limited treatment options. The present study was planned to investigate the clonal spread of CR-AB in a clinical setting. METHODOLOGY: A total of 174 A. baumannii clinical isolates were collected from a tertiary care hospitals in Lahore, Pakistan. The isolates were confirmed by VITEK 2 compact system and molecular identification of recA and bla OXA-51. Antimicrobial profile and the screening of carbapenem-resistant genes were carried out using VITEK 2 system and PCR, respectively. The molecular typing of the isolates was performed according to the Pasteur scheme. RESULTS: Of the 174 A. baumannii isolates collected, the majority were isolated from sputum samples (46.5%) and in the intensive care unit (ICU, 75%). Among these, 113/174 (64.9%) were identified as CR-AB, and 49.5% and 24.7% harbored bla OXA-23 and bla NDM-1, respectively. A total of 11 (9.7%) isolates co-harbored bla OXA-51, bla NDM-1, and bla OXA-23. Interestingly, 46.9% of the CR-AB belonged to sequence type 2 (ST2; CC1), whereas 15.9% belonged to ST1 (CC1). All of the CR-AB isolates showed extensive resistance to clinically relevant antibiotics, except colistin. CONCLUSION: The study concluded CR-AB ST2 clone harboring bla OXA-23 and bla NDM-1 are widely distributed in Pakistan's clinical settings, which could result in increased mortality. Strict compliance with the National Action Plan on Antimicrobial Resistance is necessary to reduce the impacts of these strains.
RESUMO
Modification of biochar for efficient removal of antibiotics from water could be a valuable approach in the environmental applications. In this study, a brown seaweed (Sargassum crassifolium) was pyrolyzed at 500 °C and the obtained biochar (SWBC) was modified with zeolite through the slurry method maintaining the ratio at 1:5 (zeolite: biochar) (SWBC-Z). Batch adsorption experiments were conducted to evaluate the adsorption tendency of SWBC and SWBC-Z for the removal of ciprofloxacin (CPX) from water via pH edge, kinetics, isotherm and thermodynamic experiments. The highest adsorption was in the pH range of 6.5-8, supported by the electrostatic attractions and hydrogen bonding with zwitterionic CPX. Experimental kinetics data was well-fitted to the pseudo-second-order and Elovich models (R2 of 0.992 and 0.976, respectively), while the Langmuir and Freundlich isotherm models best described the isotherm data (R2 of 0.954 and 0.976, respectively). The maximum adsorption capacity of 93.65 mg g-1 was recorded for the SWBC-Z. The models predicted chemisorption and physisorption interactions on the heterogenous biochar surface. Well-defined peaks of silanol groups in the FTIR spectrum of SWBC-Z and its electron microscopy confirmed the incorporation of zeolite minerals. Post adsorption FTIR analysis elucidated the changes in the surface functional groups of the SWBC-Z. Thermodynamic data revealed spontaneous and exothermic reaction between CPX and both the biochars. It was concluded that modification of pristine biochar with zeolite imparted greater surface area and additional active sites, which subsequently enhanced the overall CPX adsorption by the SWBC-Z.
Assuntos
Sargassum , Alga Marinha , Poluentes Químicos da Água , Zeolitas , Adsorção , Carvão Vegetal , Ciprofloxacina , Concentração de Íons de Hidrogênio , Cinética , TermodinâmicaRESUMO
2,4-Dichlorophenol (2,4-DCP) is a hazardous chlorinated organic chemical derived from phenol that exerts serious effects on living organisms. In the present study, SnO2 templated with grapefruit peel carbon as a nanocomposite (SnO2@GPC) was designed via ball-milling, and its mechanism of 2,4-DCP adsorption in aqueous solution was determined. Batch adsorption experiments revealed that the maximum adsorption efficiency of SnO2@GPC occurred at 6.0 pH, 3 mg L-1 initial adsorbate concentration, 2 h contact time, and 293 K temperature. The SnO2@GPC nanocomposite and its non-tin-bearing counterpart, grapefruit derived char (@GPC), showed maximum adsorption capacities (QL) of 45.95 and 22.09 mg g-1 and partition coefficients of 41.77 and 10.83 mg g-1 µM-1, respectively. The adsorption of 2,4-DCP was best described by the Redlich-Peterson model followed by the Langmuir model with high correlation coefficients (R2 ≥ 0.96), and the adsorption kinetic data best fitted the pseudo-second-order model (R2 ≥ 0.98). The thermodynamic parameters indicated that the reaction was spontaneous, exothermic, and involved high affinity between SnO2@GPC and 2,4-DCP. The high desorption efficiency obtained (>80%) demonstrated the recyclability of the adsorbent. The enhanced QL of SnO2@GPC was due to the effective combination of GPC and SnO2. A thin porous layer of GPC on SnO2 nanoparticles provided effective channels, a large surface area, and an abundance of active sites for 2,4-DCP adsorption. Thus, the SnO2@GPC nanocomposite could potentially be used as a low-cost adsorbent to remove 2,4-DCP from water.
Assuntos
Clorofenóis/química , Nanocompostos , Compostos de Estanho/análise , Poluentes Químicos da Água , Purificação da Água , Adsorção , Biomassa , Concentração de Íons de Hidrogênio , Cinética , Fenóis , TermodinâmicaRESUMO
Biochar has vital importance as soil additives due to its characteristics, which are responsible for alleviating environmental problems and climate change. These additives should be evaluated to understand their physico-chemical properties and their ecotoxicological effects on plant growth. Therefore, this study aimed to (i) distinguish the properties of biochar produced from date palm and its derivative hydrochar, and (ii) investigate their ecotoxicological effects. Specifically, the biochar and hydrochar were produced from date palm leaflets by pyrolysis and hydrothermal carbonization, respectively. The produced chars were evaluated for their characteristics before and after water washing, and for their ecotoxicological effects on seed germination of lettuce (Lactuca sativa L). The results show that water washing lowered biochar's pH and increased hydrochar's pH. Moreover, water washing of hydrochar caused a significant reduction in the total content of essential elements such as Ca, Mg, Mn, and Zn. Lettuce germination was significantly inhibited to 20% by hydrochar, whereas biochar enhanced lettuce growth by increasing shoot length (by 51%) and dry biomass (by 114%). Hydrochar toxicity was correlated (Râ¯>â¯0.95 at pâ¯=â¯0.05) with high contents of total polyaromatic hydrocarbons (98.8â¯mgâ¯kg-1). Pre-treatment and assessment of hydrochar should be taken into account prior to application as a soil amendment.