Indoor air quality and sick building syndrome symptoms in administrative office at public university.

Sick Building Syndrome (SBS) is an illness among workers linked to time spent in a building. This study aimed to investigate the Indoor Air Quality (IAQ) and symptoms of Sick Building Syndrome (SBS) among administrative office workers. The IAQ parameters consist of ventilation performance indicators, and physical and chemical parameters were measured using specified instruments for three days during weekdays. The SBS symptoms were assessed by a questionnaire adopted from the Industry Code of Practice of Indoor Air Quality (ICOP-IAQ) 2010 among 19 employees from the office in East Coast Malaysia. Relationship between past symptoms and present symptoms which are draught (past symptoms) with feeling heavy headed (present symptoms) (r = 0.559, p < 0.05), room temperature too high (past symptoms) was highly correlated with feeling heavy headed (present symptoms) (r = 0.598, p < 0.01) and cough (present symptoms) (r = 0.596, p < 0.01). Room temperature (past symptoms) has a positive medium relationship with cough (present symptoms) (r = 0.477, p < 0.05) and scaling itching scalp or ears (present symptoms) has a relationship between stuffy bad air (r = 0.475, p < 0.05) and dry air (r = 0.536, p < 0.05). There was a significant association between RH with drowsiness (χ2 = 7.090, p = 0.049) and dizziness (χ2 = 7.090, p = 0.049). The association was found between temperature and SBS symptoms between temperature with headache (χ2 = 7.574, p = 0.051), feeling heavy-headed (χ2 = 8.090, p = 0.046), and skin rash itchiness (χ2 = 7.451, p = 0.044). Air movement also showed a positive association with symptoms of feeling heavy-headed (x2 = 8.726, p = 0.021). PM10 has positive significance with SBSS which are feeling heavy-headed (χ2 = 7.980, p = 0.023), and eyer's irritation (χ2 = 7.419, p = 0.038). The conclusion of this study showed that there were positive significant between temperature and relative humidity toward SBSS.

Review of driving-behaviour simulation: VISSIM and artificial intelligence approach.

Examining driving behaviour is crucial for traffic operations because of its influence on driver safety and the potential for increased risk of accidents, injuries, and fatalities. Approximately 95% of severe traffic collisions can be attributed to human error. With the progress in artificial intelligence in recent decades, notable advancements have been achieved in computer capabilities, communication systems and data collection technology. This increase has significantly influenced our capacity to replicate driver behaviour and comprehend underlying driving mechanisms in diverse situations. Traffic microsimulation facilitates an understanding of traffic performance inside a given road network. Among the microsimulation software packages, Verkehr In Städten - SIMulationsmodell (VISSIM) has garnered significant attention owing to its notable ability to accurately replicate traffic circumstances with high dependability in real-world scenarios. Given the diverse applicability of VISSIM-based schemes, this review systematically examines the applications of the VISSIM-based driving-behaviour models within different research contexts, revealing their utility. This review is designed to provide guidance for researchers in selecting the most suitable methodological approach tailored to their specific research objectives and constraints when utilising VISSIM. Five important aspects, including calibration, driving behaviour, incident, and heterogeneous traffic simulation, as well as utilisation of artificial intelligence with VISSIM, are assessed, which could yield substantial advantages in advancing more precise and authentic driving-behaviour modelling in VISSIM.

Groundwater level forecasting with machine learning models: A review.

Groundwater, the world's most abundant source of freshwater, is rapidly depleting in many regions due to a variety of factors. Accurate forecasting of groundwater level (GWL) is essential for effective management of this vital resource, but it remains a complex and challenging task. In recent years, there has been a notable increase in the use of machine learning (ML) techniques to model GWL, with many studies reporting exceptional results. In this paper, we present a comprehensive review of 142 relevant articles indexed by the Web of Science from 2017 to 2023, focusing on key ML models, including artificial neural networks (ANN), adaptive neuro-fuzzy inference systems (ANFIS), support vector regression (SVR), evolutionary computing (EC), deep learning (DL), ensemble learning (EN), and hybrid-modeling (HM). We also discussed key modeling concepts such as dataset size, data splitting, input variable selection, forecasting time-step, performance metrics (PM), study zones, and aquifers, highlighting best practices for optimal GWL forecasting with ML. This review provides valuable insights and recommendations for researchers and water management agencies working in the field of groundwater management and hydrology.

Catalytic innovations: Improving wastewater treatment and hydrogen generation technologies.

The effective reduction of hazardous organic pollutants in wastewater is a pressing global concern, necessitating the development of advanced treatment technologies. Pollutants such as nitrophenols and dyes, which pose significant risks to both human and aquatic health, making their reduction particularly crucial. Despite the existence of various methods to eliminate these pollutants, they are not without limitations. The utilization of nanomaterials as catalysts for chemical reduction exhibits a promising alternative owing to their distinguished catalytic activity and substantial surface area. For catalytically reducing the pollutants NaBH4 has been utilized as a useful source for it because it reduces the pollutants quiet efficiently and it also releases hydrogen gas as well which can be used as a source of energy. This paper provides a comprehensive review of recent research on different types of nanomaterials that function as catalysts to reduce organic pollutants and also generating hydrogen from NaBH4 methanolysis while also evaluating the positive and negative aspects of nanocatalyst. Additionally, this paper examines the features effecting the process and the mechanism of catalysis. The comparison of different catalysts is based on size of catalyst, reaction time, rate of reaction, hydrogen generation rate, activation energy, and durability. The information obtained from this paper can be used to steer the development of new catalysts for reducing organic pollutants and generation hydrogen by NaBH4 methanolysis.

An efficient wastewater treatment through reduction of organic dyes using Ag nanoparticles supported on cellulose gum beads.

This work reports silver nanoparticles (AgNPs) supported on biopolymer carboxymethyl cellulose beads (Ag-CMC) serves as an efficient catalyst in the reduction process of p-nitrophenol (p-NP) and methyl orange (MO). For Ag-CMC synthesis, first CMC beads were prepared by crosslinking the CMC solution in aluminium nitrate solution and then the CMC beads were introduced into AgNO3 solution to adsorb Ag ions. Field emission scanning electron microscopy (FE-SEM) analysis suggests the uniform distribution of Ag nanoparticles on the CMC beads. The X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis revealed the metallic and fcc planes of AgNPs, respectively, in the Ag-CMC catalyst. The Ag-CMC catalyst exhibits remarkable reduction activity for the p-NP and MO dyes with the highest rate constant (kapp) of a chemical reaction is 0.519 and 0.697 min-1, respectively. Comparative reduction studies of Ag-CMC with CMC, Fe-CMC and Co-CMC disclosed that Ag-CMC containing AgNPs is an important factore in reducing the organic pollutants like p-NP and MO dyes. During the recyclability tests, the Ag-CMC also maintained high reduction activity, which suggests that CMC protects the AgNPs from leaching during dye reduction reactions.

Groundwater level forecasting using ensemble coactive neuro-fuzzy inference system.

A modeling framework utilizing the coactive neuro-fuzzy inference system (CANFIS) has been developed for multi-lead time groundwater level (GWL) forecasting in four different wells located in Texas and Florida, USA. Various model input combinations, including GWL, precipitation, temperature, and surface water level variables, have been derived based on proposed correlation analysis using singular spectrum analysis (SSA) remainders. The models have been trained on data subsets of varying lengths to identify the optimal training data duration. Additionally, we have introduced the bagging ensemble learning method to enhance the performance of the CANFIS model. As part of a comprehensive model evaluation process, the best-performing CANFIS model for each forecasting scenario has undergone uncertainty analysis using bootstrap sampling. Our results reveal that the CANFIS model performs satisfactorily for daily forecasting but leaves room for improvement in monthly forecasting, particularly for two-month and three-month ahead forecasts. Moreover, we have identified several optimal input combinations, highlighting the significance of the temperature variable in monthly forecasting. Furthermore, our findings indicate that additional training data does not necessarily lead to improved performance. The ensemble CANFIS model has demonstrated significant performance enhancement, particularly for monthly forecasting. Finally, the CANFIS model uncertainty analysis has shown satisfactory results for daily forecasting scenarios, while monthly forecasting models exhibit higher uncertainties, particularly during periods with distinctly different GWL fluctuation patterns.

Artificial intelligence models for methylene blue removal using functionalized carbon nanotubes.

This study aims to assess the practicality of utilizing artificial intelligence (AI) to replicate the adsorption capability of functionalized carbon nanotubes (CNTs) in the context of methylene blue (MB) removal. The process of generating the carbon nanotubes involved the pyrolysis of acetylene under conditions that were determined to be optimal. These conditions included a reaction temperature of 550 °C, a reaction time of 37.3 min, and a gas ratio (H2/C2H2) of 1.0. The experimental data pertaining to MB adsorption on CNTs was found to be extremely well-suited to the Pseudo-second-order model, as evidenced by an R2 value of 0.998, an X2 value of 5.75, a qe value of 163.93 (mg/g), and a K2 value of 6.34 × 10-4 (g/mg min).The MB adsorption system exhibited the best agreement with the Langmuir model, yielding an R2 of 0.989, RL value of 0.031, qm value of 250.0 mg/g. The results of AI modelling demonstrated a remarkable performance using a recurrent neural network, achieving with the highest correlation coefficient of R2 = 0.9471. Additionally, the feed-forward neural network yielded a correlation coefficient of R2 = 0.9658. The modeling results hold promise for accurately predicting the adsorption capacity of CNTs, which can potentially enhance their efficiency in removing methylene blue from wastewater.

Predicting sea levels using ML algorithms in selected locations along coastal Malaysia.

In consideration of the distinct behavior of machine learning (ML) algorithms, six well-defined ML used were carried out in this study for predicting sea level on a day-to-day basis. Data compiled from 1985 to 2018 was utilized for training and testing the developed models. An assessment of the multiple statistics-driven regression algorithms resulted such that each tested location was associated with a particular preferred model. The following were the developed best models for their respective study areas: In Peninsular Malaysia, the interactions linear regression model was the best at Pulau Langkawi (RMSE = 19.066), the Matern 5/2 gaussian process regression model at Geting (RMSE = 49.891), and the trilayered artificial neural network at Pulau Pinang (RMSE = 20.026), while the linear regression model was the best at Sandakan in Sabah, East Malaysia (RMSE = 14.054). Other metrics, such as MAE and R-square, were also at their best values, each providing its best values, further substantiating the RMSE respectively, at each of the study areas. These empirical statistics (or metrics) also revealed that despite employing sea level as the sole parameter, results obtained were exceptional better when utilizing a 7-day lag, regardless of the model used. Notably, lag variables with less than a 7-day lag could degrade the model's accuracy in representing ground reality. The study emphasizes the importance of thorough training and testing of ML to aid decision-makers in developing mitigation actions for the climate change phenomena of sea level rise through reliable ML.

Streamflow classification by employing various machine learning models for peninsular Malaysia.

Due to excessive streamflow (SF), Peninsular Malaysia has historically experienced floods and droughts. Forecasting streamflow to mitigate municipal and environmental damage is therefore crucial. Streamflow prediction has been extensively demonstrated in the literature to estimate the continuous values of streamflow level. Prediction of continuous values of streamflow is not necessary in several applications and at the same time it is very challenging task because of uncertainty. A streamflow category prediction is more advantageous for addressing the uncertainty in numerical point forecasting, considering that its predictions are linked to a propensity to belong to the pre-defined classes. Here, we formulate streamflow prediction as a time series classification with discrete ranges of values, each representing a class to classify streamflow into five or ten, respectively, using machine learning approaches in various rivers in Malaysia. The findings reveal that several models, specifically LSTM, outperform others in predicting the following n-time steps of streamflow because LSTM is able to learn the mapping between streamflow time series of 2 or 3 days ahead more than support vector machine (SVM) and gradient boosting (GB). LSTM produces higher F1 score in various rivers (by 5% in Johor, 2% in Kelantan and Melaka and Selangor, 4% in Perlis) in 2 days ahead scenario. Furthermore, the ensemble stacking of the SVM and GB achieves high performance in terms of F1 score and quadratic weighted kappa. Ensemble stacking gives 3% higher F1 score in Perak river compared to SVM and gradient boosting.

Analysis of urban heat islands with landsat satellite images and GIS in Kuala Lumpur Metropolitan City.

Cities are growing geographically in response to the enormous increase in urban population; consequently, comprehending growth and environmental changes is critical for long-term planning. Urbanization transforms naturally permeable surfaces into impermeable surfaces, causing an increase in urban land surface temperature, leading to the phenomenon known as urban heat islands. The urban heat islands are noticeable across Malaysia's rural communities and villages, particularly in Kuala Lumpur. These effects must be addressed to slow, if not halt, climate change and meet the Paris Agreement's 2030 goal. The study posits an application of thermal remote sensing utilizing a space-borne satellite-based technique to demonstrate urban evolution for urban heat island analysis and its relationship to land surface temperature. The urban heat island (UHI) was analyzed by converting infrared radiation into visible thermal images utilizing thermal imaging from remote sensing techniques. The heat island is validated by reference to the characteristics of the normalized difference vegetation index (NDVI), which define the land surface temperature (LST) of distinct locations. Based on the digital information from the satellite, the highest temperature difference between urban and rural regions for a few chosen cities in 2013 varied from 10.8 to 25.5 °C, while in 2021, it ranged from 16.1 to 26.73 °C, highlighting crucial temperature changes. The results from ANOVA test has substantially strengthened the credibility of the significant temperature changes. Some notable reveals are as follows: The Sungai Batu area, due to its rapid development and industry growth, was more vulnerable to elevated urban heat due to reduced vegetation cover; therefore, higher relative vulnerability. Contrary, the Bukit Ketumbar area, which region lies in the woodland region, experienced the lowest, with urban heat islands reading from 2013 at -0.3044 and 0.0154 in 2021. It shows that despite having urban heat islands increase two-fold from 2013 to 2021, increasing the amount of vegetation coverage is a simple and effective way of reducing the urban heat island effect, as evidenced by the low urban heat islands in the Bukit Ketumbar woodland region. The study findings are critical for advising municipal officials and urban planners to decrease urban heat islands by investing in open green spaces.

Mapping of tide-dominated Hooghly estuary water quality parameters using Sentinel-3 OLCI time-series data.

The study explores the spatio-temporal variation of water quality parameters in the Hooghly estuary, which is considered an ecologically-stressed shallow estuary and a major distributary for the Ganges River. The estimated parameters are chlorophyll-a, total suspended matter (TSM), and chromophoric dissolved organic matter (CDOM). The Sentinel-3 OLCI remote sensing imageries were analyzed for the duration of October 2018 to February 2019. We observed that the water quality of the Hooghly estuaries is comparatively low-oxygenated, mesotrophic, and phosphate-limited. Ongoing channel dredging for maintaining shipping channel depth keeps the TSM in the estuary at an elevated level, with the highest amount of TSM observed during March of 2019 (41.59g m-3) at station A, upstream point. Since the pre-monsoon season, TSM data shows a decreasing trend towards the mouth of the estuary. Chl-a concentration is higher during pre-monsoon than monsoon and post-monsoon periods, with the highest value observed in April at 1.09 mg m-3 in station D during the pre-monsoon period. The CDOM concentration was high in the middle section (January-February) and gradually decreased towards the estuary's head and mouth. The highest CDOM was found in February at locations C and D during the pre-monsoon period. Every station shows a significant correlation among CDOM, TSM, and Chl-a measured parameters. Based on our satellite data analysis, it is recommended that SNAP C2RCC be regionally used for TSM, Chl-a, and CDOM for water quality product retrieval and in various algorithms for the Hooghly estuary monitoring.

Exploring machine learning algorithms for accurate water level forecasting in Muda river, Malaysia.

Accurate water level prediction for both lake and river is essential for flood warning and freshwater resource management. In this study, three machine learning algorithms: multi-layer perceptron neural network (MLP-NN), long short-term memory neural network (LSTM) and extreme gradient boosting XGBoost were applied to develop water level forecasting models in Muda River, Malaysia. The models were developed using limited amount of daily water level and meteorological data from 2016 to 2018. Different input scenarios were tested to investigate the performance of the models. The results of the evaluation showed that the MLP model outperformed both the LSTM and the XGBoost models in predicting water levels, with an overall accuracy score of 0.871 compared to 0.865 for LSTM and 0.831 for XGBoost. No noticeable improvement has been achieved after incorporating meteorological data into the models. Even though the lowest reported performance was reported by the XGBoost, it is the faster of the three algorithms due to its advanced parallel processing capabilities and distributed computing architecture. In terms of different time horizons, the LSTM model was found to be more accurate than the MLP and XGBoost model when predicting 7 days ahead, demonstrating its superiority in capturing long-term dependencies. Therefore, it can be concluded that each ML model has its own merits and weaknesses, and the performance of different ML models differs on each case because these models depends largely on the quantity and quality of data available for the model training.

Rainfall-runoff modelling based on global climate model and tropical rainfall measuring mission (GCM -TRMM): A case study in Hulu Terengganu catchment, Malaysia.

The hydropower Plant in Terengganu is one of the major hydroelectric dams currently operated in Malaysia. For better operating and scheduling, accurate modelling of natural inflow is vital for a hydroelectric dam. The rainfall-runoff model is among the most reliable models in predicting the inflow based on the rainfall events. Such a model's reliability depends entirely on the reliability and consistency of the rainfall events assessed. However, due to the hydropower plant's remote location, the cost associated with maintaining the installed rainfall stations became a burden. Therefore, the study aims to create a continuous set of rainfall data before, during, and after the construction of a hydropower plant and simulate a rainfall-runoff model for the area. It also examines the reliability of alternative methods by combining rainfall data from two sources: the general circulation model and tropical rainfall measuring mission. Rainfall data from ground stations and generated data using inverse distance weighted method will be compared. The statistical downscaling model will obtain regional rainfall from the general circulation model. The data will be divided into three stages to evaluate the accuracy of the models in capturing inflow changes. The results revealed that rainfall data from TRMM is more correlated to ground station data with R2 = 0.606, while SDSM data has R2 = 0.592. The proposed inflow model based on GCM-TRMM data showed higher precision compared to the model using ground station data. The proposed model consistently predicted inflow during three stages with R2 values ranging from 0.75 to 0.93.

Water budget-salt balance model for calculating net water saving considering different non-conventional water resources in agricultural process.

Iraq is facing a dire water crisis due to the decrease in water quantities flow in Tigris and Euphrates Rivers. Due to population growth, several studies estimated the water shortage in 2035 to be 44 Billion Cubic Meter (BCM). Thus, Water Budget-Salt Balance Model (WBSBM) has been developed, applied and examined for the Euphrates River basin to compute the net water saving from Non-Conventional Water Resources (NCWRs). WBSBM includes 4-stages; the first is to identify the required data correspond to the conventional water resources in the study-area. The second stage is demonstrating the water-users activities. Thirdly, develop model through the proposed NCWR projects that reflect the required data. The final stage involves net water saving computation while applying all the NCWR projects simultaneously. The results obtained the optimal potential net water saving amount, which are 6.823 and 6.626 BCM/year in 2025 and 2035, respectively. In conclusion, the proposed WBSBM model has comprehensively examined different scenarios of utilizing NCWRs and has determined the optimal potential the net water saving amounts.

Optimal water supply reservoir operation by leveraging the meta-heuristic Harris Hawks algorithms and opposite based learning technique.

To ease water scarcity, dynamic programming, stochastic dynamic programming, and heuristic algorithms have been applied to solve problem matters related to water resources. Development, operation, and management are vital in a reservoir operating policy, especially when the reservoir serves a complex objective. In this study, an attempt via metaheuristic algorithms, namely the Harris Hawks Optimisation (HHO) Algorithm and the Opposite Based Learning of HHO (OBL-HHO) are made to minimise the water deficit as well as mitigate floods at downstream of the Klang Gate Dam (KGD). Due to trade-offs between water supply and flood management, the HHO and OBL-HHO models have configurable thresholds to optimise the KGD reservoir operation. To determine the efficacy of the HHO and OBL-HHO in reservoir optimisation, reliability, vulnerability, and resilience are risk measures evaluated. If inflow categories are omitted, the OBL-HHO meets 71.49% of demand compared to 54.83% for the standalone HHO. The HHO proved superior to OBL-HHO in satisfying demand during medium inflows, achieving 38.60% compared to 20.61%, even though the HHO may have experienced water loss at the end of the storage level. The HHO is still a promising method, as proven by its reliability and resilience indices compared to other published heuristic algorithms: at 62.50% and 1.56, respectively. The Artificial Bee Colony (ABC) outcomes satisfied demand at 61.36%, 59.47% with the Particle Swarm Optimisation (PSO), 55.68% with the real-coded Genetic Algorithm (GA), and 23.5 percent with the binary GA. For resilience, the ABC scored 0.16, PSO scored 0.15, and real coded GA scored 0.14 whilst the binary-GA has the worst failure recovery algorithm with 0.09.

Hydrological Analysis of Batu Dam, Malaysia in the Urban Area: Flood and Failure Analysis Preparing for Climate Change.

Extensive hydrological analysis is carried out to estimate floods for the Batu Dam, a hydropower dam located in the urban area upstream of Kuala Lumpur, Malaysia. The study demonstrates the operational state and reliability of the dam structure based on hydrologic assessment of the dam. The surrounding area is affected by heavy rainfall and climate change every year, which increases the probability of flooding and threatens a dense population downstream of the dam. This study evaluates the adequacy of dam spillways by considering the latest Probable Maximum Precipitation (PMP) and Probable Maximum Flood (PMF) values of the concerned dams. In this study, the PMP estimations are applied using comparison of both statistical method by Hershfield and National Hydraulic Research Institute of Malaysia (NAHRIM) Envelope Curve as input for PMF establishments. Since the PMF is derived from the PMP values, the highest design flood standard can be applied to any dam, ensuring inflow into the reservoirs and limiting the risk of dam structural failure. Hydrologic modeling using HEC-HMS provides PMF values for the Batu dam. Based on the results, Batu Dam is found to have 200.6 m3/s spillway discharge capacities. Under PMF conditions, the Batu dam will not face overtopping since the peak outflow of the reservoir level is still below the crest level of the dam.

Earthquake multi-classification detection based velocity and displacement data filtering using machine learning algorithms.

Earthquake is one of the natural disasters that have a big impact on society. Currently, there are many studies on earthquake detection. However, the vibrations that were detected by sensors were not only vibrations caused by the earthquake, but also other vibrations. Therefore, this study proposed an earthquake multi-classification detection with machine learning algorithms that can distinguish earthquake and non-earthquake, and vandalism vibration using acceleration seismic waves. In addition, velocity and displacement as integration products of acceleration have been considered additional features to improve the performances of machine learning algorithms. Several machine learning algorithms such as Support Vector Machine (SVM), Random Forest (RF), Decision Tree (DT), and Artificial Neural Network (ANN) have been used to develop the best algorithm for earthquake multi-classification detection. The results of this study indicate that the ANN algorithm is the best algorithm to distinguish between earthquake and non-earthquake, and vandalism vibrations. Moreover, it's also more resistant to various input features. Furthermore, using velocity and displacement as additional features has been proven to increase the performance of every model.

PM2.5 forecasting for an urban area based on deep learning and decomposition method.

Rapid growth in industrialization and urbanization have resulted in high concentration of air pollutants in the environment and thus causing severe air pollution. Excessive emission of particulate matter to ambient air has negatively impacted the health and well-being of human society. Therefore, accurate forecasting of air pollutant concentration is crucial to mitigate the associated health risk. This study aims to predict the hourly PM2.5 concentration for an urban area in Malaysia using a hybrid deep learning model. Ensemble empirical mode decomposition (EEMD) was employed to decompose the original sequence data of particulate matter into several subseries. Long short-term memory (LSTM) was used to individually forecast the decomposed subseries considering the influence of air pollutant parameters for 1-h ahead forecasting. Then, the outputs of each forecast were aggregated to obtain the final forecasting of PM2.5 concentration. This study utilized two air quality datasets from two monitoring stations to validate the performance of proposed hybrid EEMD-LSTM model based on various data distributions. The spatial and temporal correlation for the proposed dataset were analysed to determine the significant input parameters for the forecasting model. The LSTM architecture consists of two LSTM layers and the data decomposition method is added in the data pre-processing stage to improve the forecasting accuracy. Finally, a comparison analysis was conducted to compare the performance of the proposed model with other deep learning models. The results illustrated that EEMD-LSTM yielded the highest accuracy results among other deep learning models, and the hybrid forecasting model was proved to have superior performance as compared to individual models.

Bearing Fault Diagnosis Using Lightweight and Robust One-Dimensional Convolution Neural Network in the Frequency Domain.

The massive environmental noise interference and insufficient effective sample degradation data of the intelligent fault diagnosis performance methods pose an extremely concerning issue. Realising the challenge of developing a facile and straightforward model that resolves these problems, this study proposed the One-Dimensional Convolutional Neural Network (1D-CNN) based on frequency-domain signal processing. The Fast Fourier Transform (FFT) analysis is initially utilised to transform the signals from the time domain to the frequency domain; the data was represented using a phasor notation, which separates magnitude and phase and then fed to the 1D-CNN. Subsequently, the model is trained with White Gaussian Noise (WGN) to improve its robustness and resilience to noise. Based on the findings, the proposed model successfully achieved 100% classification accuracy from clean signals and simultaneously achieved considerable robustness to noise and exceptional domain adaptation ability. The diagnosis accuracy retained up to 97.37%, which was higher than the accuracy of the CNN without training under noisy conditions at only 43.75%. Furthermore, the model achieved an accuracy of up to 98.1% under different working conditions, which was superior to other reported models. In addition, the proposed model outperformed the state-of-art methods as the Signal-to-Noise Ratio (SNR) was lowered to -10 dB achieving 97.37% accuracy. In short, the proposed 1D-CNN model is a promising effective rolling bearing fault diagnosis.

Modelling monthly pan evaporation utilising Random Forest and deep learning algorithms.

Evaporation is the primary aspect causing water loss in the hydrological cycle; therefore, water loss must be precisely measured. Evaporation is an intricate nonlinear process occurring as a result of several climatic aspects. The purpose of this research is to assess the feasibility of using Random Forest (RF) and two deep learning techniques, namely convolutional neural network (CNN), and deep neural network (DNN) to accurately estimate monthly pan evaporation rates. Month-based weather data gathered from four Malaysian weather stations during the 2000-2019 timeframe was used to train and evaluate the models. Several input attributes (predictor variables) were investigated to select the most suitable variables for machine learning models. Every approach was tested with several models, each with a different set of model aspects and input parameter combinations. The formulated ML approaches were benchmarked against two commonly used empirical methods: Stephens & Stewart and Thornthwaite. Model outcomes were assessed using standard statistical measures to determine their effectiveness in predicting evaporation. The results indicated that the three ML models developed in the study performed better than empirical models and could significantly improve the precision of monthly Ep estimates even with the identical input sets. The performance assessment metrics also show that the formulated CNN approach was acceptable for modelling monthly water loss due to evaporation with a higher degree of accuracy than other ML frameworks explored in this study. In addition, the CNN framework outperformed other AI techniques evaluated for the same areas using identical data inputs. The investigation's findings in relation to the various performance criteria show that the proposed CNN model is capable of capturing the highly non-linearity of evaporation and could be regarded as an effective tool to predict evaporation.