Intercalation of Zinc Monochloride Cations by Deep Eutectic Solvents for High-Performance Rechargeable Non-aqueous Zinc Ion Batteries.

Zinc ion batteries have been extensively studied with an aqueous electrolyte system. However, the batteries suffer from a limited potential window, gas evolution, cathode dissolution, and dendrite formation on the anode. Considering these limitations, we developed an alternative electrolyte system based on deep eutectic solvents (DESs) because of their low cost, high stability, biodegradability, and non-flammability, making them optimal candidates for sustainable batteries. The DES electrolyte enables reversible Zn plating/stripping and effectively suppresses zinc dendrite formation. Furthermore, in-depth characterizations reveal that the energy storage mechanism can be attributed to [ZnCl]+ ion intercalation and the intermediate complex ion plays a pivotal role in electrochemical reactions, which deliver a high reversible capacity of 310 mAh g-1 at 0.1 A g-1and long-term stability (167 mAh g-1 at a current density of 0.3 A g-1 after 300 cycles, Coulombic efficiency: ∼98%). Overall, this work represents our new finding in rechargeable batteries with the DES electrolyte.

Facile Fabrication of Ultrasensitive Honeycomb Nano-Mesh Ultraviolet Photodetectors Based on Self-Assembled Plasmonic Architectures.

The dilemma of harvesting fugacious photons by photoactive nanomaterials of limited absorption volume fundamentally hinders the photodetection at relatively lower light intensities. To address the insufficient light utilization efficiency, spatial light confinement becomes an effective and promising approach. High-performance ultraviolet (UV) photodetectors based on the self-assembled Au nanoparticle/ZnO honeycomb nano-mesh (Au NP/ZnO HN) are demonstrated through a facile solution-processed method on anodized aluminum oxide (AAO) membranes. The congregated geometry of the self-assembled ZnO HNs is well-defined by the AAO matrixes, which also effectively collects the transmitted light beams back to the photoactive layers. Benefiting from surface plasmon resonance, the enhanced absorption of the ZnO HNs is eventually obtained via the recursive light utilization between Au NPs and AAO matrixes as a function of AAO pore diameters (DAAO). With a systematic control of the photodetector configurations, an optimal performance is obtained with growth duration of the ZnO HNs for 40 min on the AAO substrates (DAAO = 100 nm), and an excellent responsivity of 23.4 A/W is witnessed even under a relatively low light intensity of 0.4 mW/cm2, providing a novel route to realize high-performance UV photodetection under low-power illumination.

Three-Dimensional Molybdenum Diselenide Helical Nanorod Arrays for High-Performance Aluminum-Ion Batteries.

The rechargeable aluminum-ion battery (AIB) is a promising candidate for next-generation high-performance batteries, but its cathode materials require more development to improve their capacity and cycling life. We have demonstrated the growth of MoSe2 three-dimensional helical nanorod arrays on a polyimide substrate by the deposition of Mo helical nanorod arrays followed by a low-temperature plasma-assisted selenization process to form novel cathodes for AIBs. The binder-free 3D MoSe2-based AIB shows a high specific capacity of 753 mAh g-1 at a current density of 0.3 A g-1 and can maintain a high specific capacity of 138 mAh g-1 at a current density of 5 A g-1 with 10 000 cycles. Ex situ Raman, XPS, and TEM characterization results of the electrodes under different states confirm the reversible alloying conversion and intercalation hybrid mechanism during the discharge and charge cycles. All possible chemical reactions were proposed by the electrochemical curves and characterization. Further exploratory works on interdigital flexible AIBs and stretchable AIBs were demonstrated, exhibiting a steady output capacity under different bending and stretching states. This method provides a controllable strategy for selenide nanostructure-based AIBs for use in future applications of energy-storage devices in flexible and wearable electronics.

High-Performance Rechargeable Aluminum-Selenium Battery with a New Deep Eutectic Solvent Electrolyte: Thiourea-AlCl3.

Aluminum-sulfur batteries (ASBs) have attracted substantial interest due to their high theoretical specific energy density, low cost, and environmental friendliness, while the traditional sulfur cathode and ionic liquid have very fast capacity decay, limiting cycling performance because of the sluggishly electrochemical reaction and side reactions with the electrolyte. Herein, we demonstrate, for the first time, excellent rechargeable aluminum-selenium batteries (ASeBs) using a new deep eutectic solvent, thiourea-AlCl3, as an electrolyte and Se nanowires grown directly on a flexible carbon cloth substrate (Se NWs@CC) by a low-temperature selenization process as a cathode. Selenium (Se) is a chemical analogue of sulfur with higher electronic conductivity and lower ionization potential that can improve the battery kinetics on the sluggishly electrochemical reaction and the reduction of the polarization where the thiourea-AlCl3 electrolyte can stabilize the side reaction during the reversible conversion reaction of Al-Se alloying processes during the charge-discharge process, yielding a high specific capacity of 260 mAh g-1 at 50 mA g-1 and a long cycling life of 100 times with a high Coulombic efficiency of nearly 93% at 100 mA g-1. The working mechanism based on the reversible conversion reaction of the Al-Se alloying processes, confirmed by the ex situ Raman, XRD, and XPS measurements, was proposed. This work provides new insights into the development of rechargeable aluminum-chalcogenide (S, Se, and Te) batteries.

3D CoMoSe4 Nanosheet Arrays Converted Directly from Hydrothermally Processed CoMoO4 Nanosheet Arrays by Plasma-Assisted Selenization Process Toward Excellent Anode Material in Sodium-Ion Battery.

In this work, three-dimensional (3D) CoMoSe4 nanosheet arrays on network fibers of a carbon cloth denoted as CoMoSe4@C converted directly from CoMoO4 nanosheet arrays prepared by a hydrothermal process followed by the plasma-assisted selenization at a low temperature of 450 °C as an anode for sodium-ion battery (SIB) were demonstrated for the first time. With the plasma-assisted treatment on the selenization process, oxygen (O) atoms can be replaced by selenium (Se) atoms without the degradation on morphology at a low selenization temperature of 450 °C. Owing to the high specific surface area from the well-defined 3D structure, high electron conductivity, and bi-metal electrochemical activity, the superior performance with a large sodium-ion storage of 475 mA h g-1 under 0.5-3 V potential range at 0.1 A g-1 was accomplished by using this CoMoSe4@C as the electrode. Additionally, the capacity retention was well maintained over 80 % from the second cycle, exhibiting a satisfied capacity of 301 mA h g-1 even after 50 cycles. The work delivered a new approach to prepare a binary transition metallic selenide and definitely enriches the possibilities for promising anode materials in SIBs with high performances.

A Review: Enhanced Anodes of Li/Na-Ion Batteries Based on Yolk-Shell Structured Nanomaterials.

Lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) have received much attention in energy storage system. In particular, among the great efforts on enhancing the performance of LIBs and SIBs, yolk-shell (YS) structured materials have emerged as a promising strategy toward improving lithium and sodium storage. YS structures possess unique interior void space, large surface area and short diffusion distance, which can solve the problems of volume expansion and aggregation of anode materials, thus enhancing the performance of LIBs and SIBs. In this review, we present a brief overview of recent advances in the novel YS structures of spheres, polyhedrons and rods with controllable morphology and compositions. Enhanced electrochemical performance of LIBs and SIBs based on these novel YS structured anode materials was discussed in detail.

A Novel Nanocone Cluster Microstructure with Anti-reflection and Superhydrophobic Properties for Photovoltaic Devices.

As three-dimensional (3D) nanostructures can significantly improve the absorption capacity of photons, it is widely used in various photovoltaic devices. However, the high-cost and complex preparation process of traditional 3D nanostructures restricted its development greatly. In this paper, a new type of nanocone cluster microstructure was prepared on polydimethylsiloxane (PDMS) substrate by using a simple template process. This novel nanocone cluster microstructure can significantly improve the light transmittance and reduce the light reflection, showing superior anti-reflection property. In the whole range of visible band, the nanocone cluster microstructure effectively reduces the reflectivity of the light, so that it remains below 3.5%. In addition, this kind of cluster microstructure showed excellent superhydrophobic property and self-cleaning ability with the contact angle of 151°.

Rational Synthesis of Branched CoMoO4@CoNiO2 Core/Shell Nanowire Arrays for All-Solid-State Supercapacitors with Improved Performance.

Effectively composite materials with optimized structures exhibited promising potential in continuing improving the electrochemical performances of supercapacitors in the past few years. Here, we proposed a rational design of branched CoMoO4@CoNiO2 core/shell nanowire arrays on Ni foam by two steps of hydrothermal processing. Owing to the high activity of the scaffold-like CoMoO4 nanowires and the well-defined CoNiO2 nanoneedles, the three-dimensional (3D) electrode architectures achieved remarkable electrochemical performances with high areal specific capacitance (5.31 F/cm(2) at 5 mA/cm(2)) and superior cycling stability(159% of the original specific capacitance, i.e., 95.7% of the maximum retained after 5000 cycles at 30 mA/cm(2)). The all-solid-state asymmetric supercapacitors composed of such electrode and activated carbon (AC) exhibited an areal specific capacitance of 1.54 F/cm(2) at 10 mA/cm(2) and a rate capability (59.75 Wh/kg at a 1464 W/kg) comparable with Li-ion batteries. It also showed an excellent cycling stability with no capacitance attenuation after 50000 cycles at 100 mA/cm(2). After rapid charging (1 s), such supercapacitors in series could lighten a red LED for a long time and drive a mini motor effectively, demonstrating advances in energy storage, scalable integrated applications, and promising commercial potential.