Clonal mesenchymal stem cell-derived extracellular vesicles improve mouse model of weight drop-induced traumatic brain injury through reducing cistauosis and apoptosis.

OBJECTIVE: Traumatic brain injury (TBI) is a major risk factor for disabilities globally with no effective treatment thus far. Recently, homogenous population of clonal mesenchymal stem cells (cMSC) and their derived extracellular vesicles (cMSC-EVs) have been proposed as a promising TBI treatment strategy. We herein investigated possible therapeutic effect of cMSC-EVs in TBI treatment and the underlying mechanisms considering cis p-tau as an early hallmark of TBI. METHODS: We examined the EVs morphology, size distribution, marker expression, and uptake. Moreover, the EVs neuroprotective effects were studied in both in-vitro and in-vivo model. We also examined the anti-cis p-tau antibody-loading characteristics of the EVs. We treated TBI mouse model with EVs; prepared from cMSC-conditioned media. TBI mice were given cMSC-EVs intravenously and their cognitive functions were analyzed two months of the treatment. We employed immunoblot analysis to study the underlying molecular mechanisms. RESULTS: We observed a profound cMSC-EVs uptake by primary cultured neurons. We found a remarkable neuroprotective effect of cMSC-EVs upon nutritional deprivation stress. Furthermore, cMSC-EVs were effectively loaded with an anti-cis p-tau antibody. There was a significant improvement in cognitive function in TBI animal models treated with cMSC-EVs compared to the saline-treated group. There was a decreased cis p-tau and cleaved caspase3 as well as increased p-PI3K in all treated animals. CONCLUSIONS: The results revealed that cMSC-EVs efficiently improved animal behaviors after TBI by reducing cistauosis and apoptosis. Moreover, the EVs can be employed as an effective strategy for antibody delivery during passive immunotherapy.

Cell-Penetrating Peptidic GRP78 Ligand-Conjugated Iron Oxide Magnetic Nanoparticles for Tumor-Targeted Doxorubicin Delivery and Imaging.

Although chemotherapy is regarded as an essential option in cancer treatment, it is still far from being perfect. Inadequate tumor drug concentration and systemic toxicity along with broad biodistribution have diminished the utility of chemotherapy. Tumor-targeting peptide-conjugated multifunctional nanoplatforms have emerged as an effective strategy for site-directed tumor tissues in cancer treatment and imaging. Herein, Pep42-targeted iron oxide magnetic nanoparticles (IONPs) functionalized with ß-cyclodextrin (ßCD) containing doxorubicin (DOX) (Fe3O4-ßCD-Pep42-DOX) were successfully developed. The physical effects of the prepared NPs were characterized by employing various techniques. Transmission electron microscopy (TEM) images disclosed that the developed Fe3O4-ßCD-Pep42-DOX nanoplatforms had a spherical morphology and a core-shell structure with a size of nearly 17 nm. Fourier transform infrared (FT-IR) spectroscopy showed that ß-cyclodextrin, DOX, and Pep42 molecules were successfully loaded on the IONPs. In vitro cytotoxicity analysis revealed that the fabricated multifunctional Fe3O4-ßCD-Pep42 nanoplatforms possessed excellent biosafety toward BT-474, MDA-MB468 (cancerous cells), and MCF10A normal cells, while Fe3O4-ßCD-Pep42-DOX exhibited great cancer cell killing ability. The high cellular uptake along with intracellular trafficking of Fe3O4-ßCD-Pep42-DOX highlights the usefulness of the Pep42-targeting peptide. In vivo results strongly supported the in vitro results, i.e., significant tumor size reduction was observed by single-dose injection of Fe3O4-ßCD-Pep42-DOX into tumor-bearing mice. Interestingly, in vivo MR imaging (MRI) of Fe3O4-ßCD-Pep42-DOX revealed T2 contrast improvement in the tumor cells and therapeutic ability in cancer theranostics. Taken together, these findings provided strong evidence for the potential capability of Fe3O4-ßCD-Pep42-DOX as a multifunctional nanoplatform in cancer therapy and imaging and opens up a new avenue of research in this area.

Evaluation of tolerability and efficacy of a topical emulgel containing nanoliposomal ruxolitinib phosphate in the treatment of mild atopic dermatitis: a before-after single group pilot study.

BACKGROUND: Ruxolitinib is a JAK1/2 inhibitor, which inhibits the signal transduction of interferon-gamma, a cytokine implicated in the pathogenesis of atopic dermatitis (AD). In this before-after single group phase IIA pilot study, we investigated the efficacy of topical nanoliposomal ruxolitinib phosphate (RuxoLip) emulgel in mild AD. METHODS: Clinical evaluation was conducted on 10 patients with mild AD. The efficacy of the product as well as patient satisfaction was evaluated by local scoring atopic dermatitis (SCORAD) of AD. In addition, trans-epidermal water loss (TEWL), stratum corneum (SC) hydration, sebum, erythema, melanin content, and ultrasonographic parameters were measured before, and two and four weeks after treatment. RESULTS: Four weeks of treatment reduced SCORAD, itching, and burning (p = .001, .001, and .001, respectively) and increased hydration, sebum, and epidermal density (p = .001, .018, and .037, respectively). SCORAD and other skin biophysical parameters improved within two weeks of treatment and then were in plateau for up to four weeks. CONCLUSIONS: The topical ruxolitinib emulgel has good short-term efficacy and tolerability.

Comparison of engineered cartilage based on BMSCs and chondrocytes seeded on PVA-PPU scaffold in a sheep model.

In this study, polyvinyl alcohol hydrogel chains were crosslinked by polyurethane in order to synthesize a suitable substrate for cartilage lesions. The substrate was fully characterized, and in vitro and in vivo investigations were conducted based on a sheep model. In vitro tests were performed based on the chondrocyte cells with the Alcian Blue and safranin O staining in order to prove the presence of proteoglycan on the surface of the synthesized substrate, which has been secreted by cultures of chondrocytes. Furthermore, the expression of collagen type I, collagen type II, aggrecan, and Sox9 was presented in the chondrocyte cultures on the synthesized substrate through RT-PCR. In addition, the H&E analysis and other related tests demonstrated the formation of neocartilage tissue in a sheep model. The results were found to be promising for cartilage tissue engineering and verified that the isolated chondrocyte cultures on the synthesized substrate retain their original composition.

Fabrication of platinum-doped NiCo2O4 nanograss modified electrode for determination of carbendazim.

In this study, a platinum-doped nickel cobaltite nanograss (Pt-doped NiCo2O4 NG) with its own unique structural features was initially synthesized, utilizing a simple hydrothermal method and then applied as a novel platform for the detection of carbendazim (C9H9N3O2; CBZ). To this end, the CBZ electrochemical signals were evaluated by means of differential pulse voltammetry (DPV), demonstrating the acceptable catalytic effect of the Pt-doped NiCo2O4 NG/screen-printed electrode (SPE) on the CBZ oxidation signal. Under the optimized conditions, CBZ was subsequently quantified by the Pt-doped NiCo2O4 NG/SPE with a wide linear range (0.03-140 µM) and a low limit of detection (LOD) value (0.005 µM). The proposed sensor was thus characterized by good anti-interference ability, selectivity, and stability. The analysis of the real samples, viz. tomato and lettuce, also confirmed that the given sensor had good recoveries and relative standard deviation (RSD). Ultimately, a comparison between liquid chromatography-mass spectrometry (LC-MS) and this method established no significant difference in the results.

Potential of chitosan/alginate nanoparticles as a non-viral vector for gene delivery: Formulation and optimization using D-optimal design.

Chitosan/alginate (Chi/Alg) nanoparticles as a non-viral vector for the Smad4 encoding plasmid were optimized utilizing D-optimal design based on the nanoparticles/plasmid ratio, Chi/Alg MW, and preparation method type. Following the optimization and validation of the best formula, morphology studies and FTIR measurements were performed to evaluate the optimized Chi/Alg/S NPs. Toxicity (MTT assay) and transfection studies were performed for the best formula in comparison with Lipofectamine 2000, and Polyethyleneimine (PEI) and evaluated using Green Fluorescence Protein (GFP) assay, Flow cytometry, and RT-PCR. The model predicted a particle size of 111 nm, loading efficacy (LE) of 43%, cumulative release (CMR) of 39%, the ζ-potential of +50 mV, and PDI of 0.13. The predicted point condition was as follows: NP ratio = 13, Chi/Alg MW ratio = 2.35, and preparation method type = 1. Microscopic findings revealed that the shape of nanoparticles was spherical. The Chi/Alg/S nanoparticles showed no toxicity and transfection efficacy of 29.9% was observed in comparison with Lipofectamine (35.5%) and PEI (30.9%).

A comparative pharmacokinetic study of a novel sustained release danofloxacin formulation and the conventional product in rabbits.

Sustained release drug formulations are frequently developed to reduce dosage frequency and to improve outcomes of drug therapy. This study evaluates the pharmacokinetic (PK) parameters of a novel injectable danofloxacin (DANO) formulation in comparison with a conventional product in an animal model. A recently synthesized DANO formulation, prepared by incorporation of DANO-loaded mesoporous silica nanoparticles in liposomes and integration of liposomes in chitosan and ß-glycerophosphate solution (lipogel) along with the conventional DANO product were injected subcutaneously (SC) in rabbits. Blood samples were collected at specific time points and DANO concentrations in plasma samples were measured. The PK parameters including maximum concentration (Cmax), time to reach Cmax (Tmax), area under the concentration versus time curves (AUC), area under the first moment concentration-time curve (AUMC) and mean residence time (MRT) were studied by non-compartmental analyses. The values of MRT (156.00 ± 20.00 hr), AUC (15.30 ± 3.00 µg mL-1 per hr) and Tmax (4.70 ± 1.60 hr) for lipogel formulation were higher than those of the conventional product (8.50 ± 3.60 hr, 3.70 ± 2.00 µg mL-1 per hr and 0.80 ± 0.26 hr, respectively). However, Cmax values for lipogel formulation (0.41 ± 0.15 µg mL-1) were significantly lower than those of the conventional drug product (0.68 ± 0.09 µg mL-1). It was concluded that the novel DANO lipogel effectively slowed down the drug absorption and the incorporation of liposomes in hydrogel could be a useful approach to maintain the therapeutic drug level for a longer period; however, more studies are needed in this field.

Design and In Vitro Evaluation of a Slow-Release Intraocular Implant of Betamethasone.

Posterior eye diseases are a common cause of vision problems in developing countries, which have encouraged the development of new treatment models for these degenerative diseases. Intraocular implants are one of the drug delivery systems to the posterior region of the eye. Using these implants, the blood-eye barrier can be bypassed; the complications caused by repeated in vitro administrations can be eliminated, and smaller amounts of the drug would be used during the treatment process. Meanwhile, biodegradable implants have received more attention due to their biodegradable structure and the lack of need for re-surgery to remove the rest of the system from the eye. The aim of this study is to employ biodegradable implants composed of polyethylene glycol (PEG) and 3-hydroxybutyrate-co-3-hydroxyvalerat (PHBV) to deliver betamethasone to the back of the eye in the treatment of retinopathy. PHBV polymer has been selected as the main polymer with a certain ratio of drug to polymer for fabrication of enamel and different amounts of PEG with three molecular weights used as pore generators to control drug release over a period of time. Based on the analysis of the results of differential scanning calorimetry (DSC) and FTIR spectroscopy, none of the polymers were degraded in the temperature range of the manufacturing process, and among betamethasone derivatives, the best option for implant preparation is the use of its basic form. Drug release studies over a period of three months showed that implants containing PHBV HV2% and PEG 6000 had a more appropriate release profile.

Preparation, Statistical Optimization and Characterization of Propolis-Loaded Solid Lipid Nanoparticles Using Box-Behnken Design.

Purpose: Propolis is a resinous material obtained by honeybees with many biological and pharmacological properties which can be used for treatment of various diseases. Current study aims to formulate and characterize propolis-loaded solid lipid nanoparticles (SLNs) carrier system. Methods: The prepared SLNs, composed of glyceryl monostearate (GMS), Soy lecithin, Tween 80 and polyethylene glycol 400 (PEG 400), were fabricated employing solvent emulsification-evaporation technique. In addition, the impact of several variables including concentration ratios of GMS/Soy lecithin and PEG 400/Tween 80 along with emulsification time were evaluated on the size, polydispersity index (PDI) and zeta potential of particles. SLN formulations were optimized using Box-Behnken design. The particles were freeze dried and morphologically studied by scanning electron microscopy (SEM). The in-vitro release profile of propolis entrapped in the optimized nanoparticles was investigated. Results: The mean particle size, PDI, zeta potential, entrapment efficiency (EE) and loading efficiency (LE) of optimized propolis-loaded SLNs were found to be 122.6±22.36 nm, 0.28±0.06, -26.18±3.3 mV, 73.57±0.86% and 3.29±0.27%, respectively. SEM images exhibited nanoparticles to be non-aggregated and in spherical shape. The in-vitro release study showed prolonged release of propolis from nanoparticles. Conclusion: The results implied that the proposed way of SLN preparation could be considered as a proper method for production of propolis loaded colloidal carrier system.

Response Surface Methodology for Statistical Optimization of Chitosan/Alginate Nanoparticles as a Vehicle for Recombinant Human Bone Morphogenetic Protein-2 Delivery.

PURPOSE: In this study, chitosan/alginate nanoparticles are prospected as a carrier for controlled release of recombinant human bone morphogenetic protein-2 (rhBMP-2). MATERIALS AND METHODS: The rhBMP-2-loaded chitosan/alginate nanoparticles (Cs/Alg/B NPs) were prepared using the ionic gelation (IG) method. The current research was conducted to optimize the effective factors for entrapping rhBMP-2 in Cs/Alg NPs using response surface methodology (RSM) and the Box-Behnken design (BBD). The variables were the Cs/Alg molecular weight (Mw) ratios (1-3), pH (4.8-5.5), stirring rates (900-1300 rpm) and the responses included size, ζ-potential, polydispersity index (PDI), loading efficacy (LE), cumulative release (CR), and morphological degradation time (MDE). Then, the morphological properties of optimum formulation were studied for post-characterization. In the next step, the MTT assay for the optimized run was done for 24 and 48 hours. RESULTS: The results revealed that the optimum conditions for the mentioned variables were stirring rate=1100 rpm, pH=5.15, and Cs/Alg Mw ratio=1.75 based on numerical optimization. It was shown that the average particle size and loading efficacy at optimum conditions were 253 nm and 67%, respectively. Other responses were as follows: CR=66%, ζ-potential=+35mV, PDI=0.5, and MDT=7 days. CONCLUSION: The results have suggested that the statistical optimization of rhBMP-2 offers the possibility of preparing Cs/Alg/B NPs with a favorable size, controlled release characteristics, and high loading efficiency. It is expected that the acquired optimum conditions will be useful for efficient rhBMP-2 delivery.

Development of a new electrochemical DNA biosensor based on Eu3+-doped NiO for determination of amsacrine as an anti-cancer drug: Electrochemical, spectroscopic and docking studies.

The present research reported a new electrochemical biosensor based on ds-DNA/Eu3+ doped NiO/CPE to detect amsacrine. Therefore, UV-Vis spectrophotometry, docking, and differential pulse voltammetry (DPV) have been used to study the interactions between amsacrine and dsDNA. Then, experimental parameters affected DNA immobilization and interactions between amsacrine and ds-DNA have been optimized. Afterwards, guanine oxidation peak current of ds-DNA has been chosen as a signal to analyze amsacrine in a concentration ranging between 0.1 and 100.0 µM and finally, limit of detection (LOD) of 0.05 µM has been calculated at optimal condition. Ultimately, it was found that the suggested biosensor is able to determine amsacrine in human serum and urine samples successfully.

Nanofibrous Scaffolds Containing Hydroxyapatite and Microfluidic-Prepared Polyamidoamin/BMP-2 Plasmid Dendriplexes for Bone Tissue Engineering Applications.

OBJECTIVE: The aim of this study is to fabricate functional scaffolds to gene delivery bone morphogenetic protein-2 (BMP-2) plasmid for bone formation in bone tissue engineering. METHODS: Dendriplexes (DPs) of generation 4 polyamidoamin (G4-PAMAM)/BMP-2 plasmid were prepared through microfluidic (MF) platform. The physiochemical properties and toxicity of DPs were evaluated by DLS, AFM, FESEM and MTT assay. In order to create a suitable environment for stem cell growth and differentiation, poly-l-lactic acid (PLLA) and poly-l-lactic acid/poly (ethylene oxide) (PLLA/PEO) scaffolds containing hydroxyapatite nanoparticles (HA) and DPs were fabricated by the electrospinning method. The osteogenic potency of the scaffolds on human adipose tissue-derived mesenchymal stem cells (hASCs) was investigated. RESULTS: The results revealed that tuning the physical properties of DPs by adjusting flow parameters in microfluidic platform can easily improve the cell viability compared to conventional bulk mixing method. Also, the result showed that the presence of HA and DPs in PLLA/PEO scaffold enhanced alkaline phosphatase (ALP) activity and increased the amount of deposited Ca, as well as, related to osteogenesis gen markers. CONCLUSION: This study indicated that on using the MF platform in preparation of DPs and loading them along with HA in PLLA/PEO scaffold, the osteogenic differentiation of hASCs could be tuned.

Multifunctional MIL-Cur@FC as a theranostic agent for magnetic resonance imaging and targeting drug delivery: in vitro and in vivo study.

Owing to the importance of multifunctional theranostics as promising systems to overcome key problems of conventional cancer therapy, in this study a multifunctional metal-organic framework-based (MOF) theranostic system was prepared and applied as intelligent theranostic systems in cancer. Iron-based MOF, MIL-88B, in a multi-faceted shape was initially prepared. Curcumin (Cur) was then loaded into the pores of MIL and folic acid-chitosan conjugate (FC) was finally coated on the surface of the carrier to accomplish cancer-specific targeting properties. MTT assay revealed perfect cytocompatibility of the system and selective toxicity against cancerous cells. In vivo MRI images showed high tumour uptake for MIL-Cur@FC and high T1-T2 contrast effect. The growth inhibiting efficiencies of MIL-Cur@FC on M109 tumour bearing Balb/C mice without reducing their body weight showed maximum tumour eradication with no significant toxicities. Due to the outstanding features of the system achieved from in vitro and in vivo studies, we believe that this study will provide a novel approach for developing targeted theranostic agents in cancer diagnosis and treatment.

Pharmaceutical implants: classification, limitations and therapeutic applications.

Controlled/sustained delivery systems have been developed rapidly which show the ability to overcome the obstacles of traditional delivery systems. Daily development of biomedical and biomaterial sciences has brought more attention to the implantable delivery systems. As a result, these systems have found their position in the medical field since they were introduced. The advances in the polymeric science along with the other fields, make the production of a wide variety of implantable systems, possible. The influence of these systems in medical field could not be denied Here', the pharmaceutical applications which have been mostly focused on, are discussed. Since these systems have proven to be beneficial, researchers are trying to adjust their defects to the desired properties. Doing so, the path that implantable delivery systems have crossed so far should be studied, and that's the aim of this review. In the present report, the advantages of these systems in chemotherapeutic, contraceptive, neuropsychology, pain management, peptide delivery, ocular delivery, cardiovascular, orthopedic, and dental fields have been evaluated.

Neuroprotective Potential of Curcumin-Loaded Nanostructured Lipid Carrier in an Animal Model of Alzheimer's Disease: Behavioral and Biochemical Evidence.

Alzheimer's disease (AD) is one of the most common neurodegenerative diseases and is caused by accumulation of amyloid-ß (Aß) peptide and is associated with neurological abnormalities in learning and memory. The protective role of curcumin on nerve cells, along with a potent antioxidant and free radical scavenging activity, has been widely studied. However, its low bioavailability and limited transport ability across the blood-brain barrier are two major drawbacks of its application in the treatment of different neurodegenerative diseases. The present study was designed to improve the effectiveness of curcumin in the treatment of Aß-induced cognitive deficiencies in a rat model of AD by loading it into nanostructured lipid carriers (NLCs). The accumulation rate of curcumin (505.76±38.4 ng/g-1 h) in rat brain, as well as its serum levels, were significantly increased by using curcumin-loaded NLCs. The effective role of NLCs for brain delivery of curcumin was confirmed by reduced oxidative stress parameters (ROS formation, lipid peroxidation, and ADP/ATP ratio) in the hippocampal tissue and improvement of spatial memory. Also, histopathological studies revealed the potential of Cur-NLCs in decreasing the hallmarks of Aß in AD in the animal model. The result of studying the neuroprotective potential of Cur-NLC in both pre-treatment and treatment modes showed that loading curcumin in NLCs is an effective strategy for increasing curcumin delivery to the brain and reducing Aß-induced neurological abnormalities and memory defects and that it can be the basis for further studies in the area of AD prevention and treatment.

Fabrication of long-acting insulin formulation based on poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles: preparation, optimization, characterization, and in vitro evaluation.

The purpose of this research was the fabrication, statistical optimization, and in vitro characterization of insulin-loaded poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanoparticles (INS-PHBV-NPs). Nanopar-ticles were successfully developed by double emulsification solvent evaporation method. The NPs were characterized for particle size, entrapment efficiency (EE%), and polydispersity index (PDI). The NPs also were characterized by scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and circular dichroism (CD). The optimum conditions were found to be 1.6% polyvinyl alcohol (PVA), 0.9% of PHBV, and 15 mg/ml of insulin with the aid of the Box-Behnken experimental design results. The optimized NPs showed spherical shape with particle size of 250.21 ± 11.37 nm, PDI of 0.12 ± 0.01, and with EE% of 90.12 ± 2.10%. In vitro drug release pattern followed Korsmeyer-Peppas model and exhibited an initial burst release of 19% with extended drug release of 63.2% from optimized NPs within 27 d. In conclusion, these results suggest that INS-PHBV-NPs could be a promising candidate for designing an injectable sustained release formulation for insulin.

Dexamethasone loaded multi-layer poly-l-lactic acid/pluronic P123 composite electrospun nanofiber scaffolds for bone tissue engineering and drug delivery.

In tissue engineering, it is common to mix drugs that can control proliferation and differentiation of cells into polymeric solutions as part of composite to get bioactive scaffolds. However, direct incorporation of drugs might potentially result in undesired burst release. To overcome this problem, here we developed electrospun multilayer drug loaded poly-l-lactic acid/pluronic P123 (PLLA-P123) composite scaffolds. The drug was loaded into the middle layer. The surface, the mechanical and physiochemical properties of the scaffolds were evaluated. The drug release profiles were monitored. Finally, the osteogenic proliferation and differentiation potential were determined. The scaffolds fabricated here have appropriate surface properties, but with different mechanical strength and osteogenic proliferation and differentiation. Multi-layer scaffolds where the drug was in the middle layer and PLLA-plasma and PLLA-P123 with cover layer showed the best osteogenic proliferation and differentiation than the other groups of scaffolds. The drug release profiles of the scaffolds were completely different: single layer scaffolds showed burst release within the first day, while multilayer scaffolds showed controlled release. Therefore, the multilayer drug loaded scaffolds prepared have dual benefits can provide both better osteogenesis and controlled release of drugs and bioactive molecules at the implant site.

Brain Delivery of Curcumin Using Solid Lipid Nanoparticles and Nanostructured Lipid Carriers: Preparation, Optimization, and Pharmacokinetic Evaluation.

Curcumin is a multitherapeutic agent with great therapeutic potential in central nervous system (CNS) diseases. In the current study, curcumin was encapsulated in solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) for the purpose of increasing brain accumulation. The preparation processes have been optimized using experimental design and multiobjective optimization methods. Entrapment efficiency of curcumin in SLNs and NLCs was found to be 82% ± 0.49 and 94% ± 0.74, respectively. The pharmacokinetic studies showed that the amount of curcumin available in the brain was significantly higher in curcumin-loaded NLCs (AUC0-t = 505.76 ng/g h) compared to free curcumin (AUC0-t = 0.00 ng/g h) and curcumin-loaded SLNs (AUC0-t = 116.31 ng/g h) ( P < 0.005), after intravenous (IV) administration of 4 mg/kg dose of curcumin in rat. The results of differential scanning calorimetry and X-ray diffraction showed that curcumin has been dispersed as amorphous in the nanocarriers. Scanning electron microscopy images confirmed the nanoscale size and spherical shape of the nanoparticles. The DPPH (2,2-diphenyl-1-picrylhydrazyl) free radical scavenging study indicated that preparation processes do not have any significant effect on the antioxidant activity of curcumin. The results of this study are promising for the use of curcumin-loaded NLCs in more studies and using curcumin in the treatment of CNS diseases.

Nicotinamide loaded functionalized solid lipid nanoparticles improves cognition in Alzheimer's disease animal model by reducing Tau hyperphosphorylation.

BACKGROUND: Nicotinamide is considered to be effective in halting the Alzheimer's disease progression. The body could absorb a limited amount of nicotinamide at a time, requiring multiple doses through a day. To overcome such an obstacle which reduces the patient compliance, a sustained/controlled delivery system could be useful. METHOD: Nicotinamide loaded solid lipid nanoparticles (SLN) were prepared and functionalized with polysorbate 80 (S80), phosphatidylserine (PS) or phosphatidic acid (PA). The acquired particles were characterized and evaluated in respect of their cytotoxicity, biodistribution, and in vivo effectiveness through the different routes of administration. RESULTS: The optimum sizes of 112 ± 1.6 nm, 124 ± 0.8 nm, and 137 ± 1.05 nm were acquired for S80-, PS-, and PA-functionalized SLNs, respectively. The in vitro cytotoxicity on SH-SY5Y cell line showed the safety of formulations except for S80-functionalized SLNs. Biodistribution study of SLNs has proved the benefits of functionalization in improving the brain delivery. The results of spatial and memory test, i.e. Morris water maze, and also histopathology and biochemical tests demonstrated the effectiveness of i.p. injection of PS -functionalized SLNs in improving the cognition, preserving the neuronal cells and reducing tau hyperphosphorylation in a rat model of Alzheimer's disease. CONCLUSION: The acquired PS-functionalized SLN could be a potential brain delivery system. Loaded with nicotinamide, an HDAC inhibitor, it could ameliorate the cognition impairment of rats more effectively than the conventional administration of nicotinamide, i.e. oral, in the early stage of Alzheimer's disease. Graphical abstract ᅟ.

Tolerance induction by surface immobilization of Jagged-1 for immunoprotection of pancreatic islets.

Although transplantation of pancreatic islets is a promising approach for treatment of type 1 diabetes mellitus, the engraftment efficiency of these islets is limited by host immune responses. Extensive efforts have been made to immunoisolate these islets by introducing barriers on the islet surface. To date, these barriers have not successfully protected islets from attack by the immune system. In addition, the inevitable permeability of an islet capsule cannot prevent filtration by proinflammatory cytokines and islet self-antigens. Thus, we have developed a surface engineering approach for localized immonumodulation of the islet microenvironment. Jagged-1 (JAG-1), as a potent immunomodulatory factor, was immobilized on the islet surface by mediation of a double-layer of heterobifunctional poly (ethylene glycol) (PEG). Immobilization and functionality of JAG-1 on PEGylated islet surfaces were established. When co-cultured with splenocytes, the JAG-1 conjugated islets induced a significant increase in regulatory T cells and regulated the cytokine levels produced by immune cells. The results demonstrated that JAG-1 immobilization could improve immunoprotection of pancreatic islets by localized modulation of the immune milieu from an inflammatory to an anti-inflammatory state. We also evaluated the effects of surface modification of these islets by JAG-1 in a xenotransplantation model. The transplanted JAG-1/PEG/islets group showed a significantly reduced blood glucose levels compared with the control group of diabetic mice during the acute phase of the immune response to the transplanted islets. Our results demonstrated that surface modification has the potential to shift the immune system from an inflammatory to anti-inflammatory milieu and may offer a new prospective for immunoprotection of pancreatic islets.