Potential Impact of Long COVID-19 on Orthodontic Treatment.

Pooled estimates indicate about 226 million individuals are currently experiencing or have experienced persistent symptoms from COVID-19. Long COVID-19 (LC) has been associated with a prolonged inflammatory and stress responses in affected individuals. Due to common pathways, LC could impact the biological mechanisms of orthodontic tooth movement, orthodontically-induced inflammatory root resorption and periodontal tissue response of patients undergoing orthodontic treatment. The authors of the present report discussed potential biological mechanisms through which LC may influence orthodontic treatment highlighting the need for further research in this area.

Comparison of GUMMETAL® and stainless steel alloy during canine retraction: A pilot split-mouth randomized controlled trial.

OBJECTIVES: A TiNb alloy wire (GUMMETAL® [GM], Toyota Central R&D Labs, Inc., Nagakute, Japan) was recently developed with unique properties for orthodontic applications. This pilot split-mouth randomized controlled trial compared maxillary canine retraction during space closure using sliding mechanics on GM vs. stainless steel (SS) archwires. METHODS: Subjects who met the inclusion criteria were treated with fixed appliances and maxillary first-premolar extractions between September 2020 and March 2022. After leveling and aligning, maxillary archwires, fabricated by crimping together segments of 0.016×0.022" GM and SS archwires, were placed and canine retraction initiated using nickel-titanium coil springs. Digital models of the maxillary arch were superimposed at 0, 4, 8 and 12 weeks and the amount of canine movement (mm), rate of movement (mm/month), and 3-dimensional changes (rotational, vertical extrusion, tip) were measured and compared statistically. RESULTS: Of the 12 subjects recruited, only six completed the study with a median age of 15.8 years (12.0-17.4 years). At 12 weeks, the median canine retraction was 3.41mm (IQR: 2.10, 4.76) with GM versus 3.71mm (IQR: 1.62, 6.45) with SS. The retraction rate was 1.14mm/month (IQR: 0.69, 1.59) with GM, versus 1.24mm/month (IQR: 0.54, 2.15) with SS. The median rotational, vertical and tip changes of the canine were 7.90̊, 0.59mm and 6.15̊ with GM, and 7.25̊, 0.29mm and 2.05̊ with SS. Intergroup differences with all measurements were not statistically significant. CONCLUSION: No significant differences were found between GM and SS during maxillary canine retraction. GM demonstrated clinical potential for space closure mechanics, however, future larger studies are needed.

Resident selection, assessment, and management: Proceedings of the 2022 ADEA Advanced Dental Education Summit.

The fifth biennial Advanced Dental Education Summit was organized by the ADEA Council on Advanced Education Programs. With a focus on "Resident selection, assessment, and management," the summit aimed to discuss best practices for selecting, assessing, and managing advanced education residents. Expert presentations covered the resident's journey from interview to graduation, emphasizing strategies for supporting resident wellness, success, and evaluation. The summit provided recommendations, including the incorporation of psychosocial assessments in the selection process, early recognition of behavioral issues, clearly defining clinical competencies, and creating a culture of wellness through supportive policies and structures.

Effects of various coating methods on the mechanical, physical, and aesthetic properties of GUMMETAL® archwires: In vitro study.

PURPOSE: The objective of this study was to evaluate the mechanical, physical, and aesthetic properties of GUMMETAL® (GM) orthodontic archwires after the application of various aesthetic coating materials. METHODS: This in vitro study included 180 orthodontic wires: five experimental groups used 0.016×0.022-inch GM as the core-based wire followed by the application of epoxy, polytetrafluoroethylene (PTFE), clear ceramic, white ceramic, or silicone; and four control groups: 0.016×0.022-inch GM, 0.019×0.025-inch GM, 0.016×0.022-inch stainless steel (SS), and 0.019×0.025-inch SS. Frictional forces, force deflection rate, yield strength, aesthetic colour value, corrosive and wear resistance were compared between the experimental and control groups. RESULTS: Among the coated wires, white ceramic exhibited the highest frictional force (2.06±0.20 N) and silicone showed the lowest values (0.88±0.12 N). There were significant differences in static friction between experimental and control groups (P<0.001). PTFE coating had the highest force deflection rate (9.03±0.12 N/mm) and yield strength (10.0±0.14 N/mm) among coated wires and white ceramic exhibited the lowest values (6.86±0.14 N/mm and 7.74±0.17 N/mm for force deflection rate and yield strength, respectively). Differences in force deflection rate and yield strength between experimental and control groups were statistically significant (P<0.001). All coated wire groups had a clinical difference in colour when compared to A1 shade. Coated and uncoated wires showed good corrosion resistance after one week in corrosive saliva with no detectable loss of mass. CONCLUSIONS: This study has shown that coating wires can improve some aspects of the wire properties but not all when compared to uncoated GM and SS. Future investigation of the materials used in this study is required to further characterize their properties.

Association between obstructive sleep apnea syndrome and bone mineral density in adult orthodontic populations.

OBJECTIVE: To determine the association between obstructive sleep apnea syndrome (OSAS) and predicted bone mineral density (BMD) in adults presenting for orthodontic treatment. METHODS: This retrospective cross-sectional study included 38 adults divided into OSAS and non-OSAS groups. Using pre-treatment CBCT images, radiographic density (RD) of left and right lateral regions of the 1st cervical vertebrae and dens of the 2nd cervical vertebrae were measured as an indicator for BMD. RESULTS: When controlling for age, sex, and BMI, the mean RD was significantly lower in the OSAS group compared to the non-OSAS group (left CV1: 36.69 ± 84.50 vs. 81.67 ± 93.25 Hounsfield Units [HU], respectively, p = 0.031; right CV1: 30.59 ± 81.18 vs. 74.26 ± 91.81 HU, p = 0.045; dens: 159.25 ± 115.96 vs. 223.94 ± 106.09 HU, p = 0.038). CONCLUSION: Adults with OSAS have lower values for predicted BMD than those without OSAS.

LOW-LEVEL LASER THERAPY MAY REDUCE PAIN ASSOCIATED WITH ORTHODONTIC SEPARATOR PLACEMENT.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Farzan, A. K. Khaleghi (2021). "The Effectiveness of Low-Level Laser Therapy in Pain Induced by Orthodontic Separator Placement: A Systematic Review." J Lasers Med Sci 12: e29. SOURCE OF FUNDING: None. TYPE OF STUDY/DESIGN: Systematic review.

Friction forces generated by aesthetic Gummetal® (Ti-Nb) orthodontic archwires: A comparative in vitro study.

OBJECTIVE: The aim of this in vitro study was to compare friction forces generated by the following archwires: rhodium-plated aesthetic Gummetal® (E-GM), Gummetal® (GM), stainless steel (SS) and titanium-molybdenum alloy (TMA), according to bracket-wire angulation and archwire cleanliness. METHODS: One hundred and ninety-two samples of four orthodontic alloys (E-GM, GM, SS, and TMA) were prepared. The samples were divided into two groups: uncleaned and cleaned using 99% isopropanol in an ultrasonic bath, then subdivided into three subgroups according to bracket-wire angulation: 0°, 5° and 10°. Using a universal testing machine, the wires were pulled through SS maxillary right canine brackets to test static friction forces according to bracket-wire angulation and wire cleanliness. Representative specimens were evaluated to assess surface morphology and roughness. RESULTS: There were significant differences in static friction forces between archwires when analysed by bracket-wire angulation and cleanliness (P<0.001) except for the 0° uncleaned group. Overall, TMA archwires produced the highest friction while SS wires showed the lowest friction at 0° and 5°. E-GM wires showed comparable friction to SS at 0o (cleaned and uncleaned), but significantly higher friction than SS at 5o (uncleaned) and 10° (cleaned). GM wires had comparable friction to SS at 0° (cleaned and uncleaned), but significantly less friction at the 5° (cleaned) and 10° (cleaned and uncleaned). Compared to GM, E-GM had significantly higher friction at 5o and 10° (cleaned and uncleaned). Cleaning wires reduced surface roughness but increased overall friction. CONCLUSION: E-GM wires generate higher frictional resistance forces compared to GM and SS, especially at higher bracket-wire angulations and when cleaned. GM friction forces are comparable to SS and thus could be used for space closure with sliding mechanics. However, E-GM wires are not ideal for the same purpose.

Shear Bond Strength and Bracket Base Morphology of New and Rebonded Orthodontic Ceramic Brackets.

The objectives of this study were to (1) to evaluate the shear bond strength (SBS) of two ceramic brackets when new and when rebonded following various bracket base conditioning methods, and (2) to determine bond failure mode relative to bracket base morphology. 100 Symetri ClearTM (SC) and 100 Radiance Plus® (RP) ceramic brackets were bonded to bovine incisors and divided into five groups: one group served as controls and four had brackets rebonded following conditioning by: no surface treatment, sealant, sandblasting, and flame then steam. SBS, adhesive remnant index, and bracket base morphology were evaluated. SBS showed no statistical difference between new and rebonded with no surface treatment or sealant (SC brackets) and with sealant or flame and steam (RP brackets). When comparing SC to RP, SBS was higher with SC, no surface treatment, and sandblasted groups. All groups had varying amounts of adhesive left on the tooth, with the sandblasted group having the most. SEM analysis showed that sandblasting damaged the retention features of bracket bases. In conclusion, when rebonded, the SBS of SC brackets that had no surface treatment and both SC and RP brackets that had sealant showed no significant differences to new brackets. Sandblasting damaged the retention features of SC and RP bracket bases, resulting in low SBS.

Comparison of bleaching effects when applied to white-spot lesions before or after resin infiltration: An in vitro study.

BACKGROUND: The purpose of this study was to compare color alterations (ΔE) of white-spot lesions (WSLs) bleached before versus after resin infiltration (RI). METHODS: Using the facial surfaces of bovine maxillary incisors, WSLs were created and the teeth were allocated into 2 groups (n = 45/group): bleach then RI (B-RI group) and RI then bleach (RI-B group). To determine ΔE, Commission Internationale de l'Eclairage L∗ a∗ b∗ (L∗ represents lightness, ranging from black to white [0-100]; a∗ represents green to red chromaticity [-150-+100]; and b∗ represents blue to yellow chromaticity [-100-+150]) measurements were obtained at baseline, after WSL formation, and after RI and bleaching. Representative specimens were evaluated by means of scanning electron microscopy. Statistical analyses included the Mann-Whitney U and Wilcoxon signed rank tests (P ≤ .0016) and repeated measures analysis of variance (P ≤ .05). RESULTS: No differences in ΔE were found comparing B-RI with RI-B groups or when the B-RI group was compared with bleached enamel. A statistically significant difference was found when the RI-B group was compared with bleached enamel (ΔE, 0.81; P < .001), but the difference was deemed not clinically significant. Scanning electron microscopy revealed that bleaching after RI increased surface roughness of the resin. CONCLUSIONS: There were no clinically significant differences in ΔE of WSLs when bleach was applied before or after RI; however, applying bleaching agent after RI roughened the surface of the resin material. PRACTICAL IMPLICATIONS: Results indicate that ΔE were not clinically significantly different between WSLs bleached before versus after RI, although it is best to sequence bleaching before RI therapy, as bleaching after RI roughened the restoration's surface.

Three-dimensional analysis of upper airway and craniofacial morphology in orthodontic adolescents with Attention Deficit Hyperactivity Disorder (ADHD): A comparative retrospective study.

PURPOSE: The aim of this study is to evaluate craniofacial characteristics and upper airway morphology in adolescents with Attention Deficit Disorder with Hyperactivity (ADHD) compared to controls (CON). MATERIALS AND METHODS: Records from July 2014 to May 2018 of patients who were seeking orthodontic treatment at a single institute and had full pre-treatment orthodontic records including cone-beam computed tomography (CBCT) were reviewed. Comprehensive cephalometric variables were measured to determine craniofacial morphology. Upper airway volume (UAV), minimum cross-sectional area (MCA), and linear measurements were calculated at multiple planes. RESULTS: A total of 87 adolescents (ADHD, 29; CON, 58) were included in the study. Overall, UAV and MCA in ADHA group were smaller than CON. Statistical significance was evident in airway widths at planes A (P=0.002), C (P=0.042), and D (P<0.001), and airway area at plane D (lower hypopharynx) (P<0.001), with the ADHD group showing narrower widths and area compared to CON. The most common skeletal classification in the ADHD group was sequenced as Class II, Class I then Class III, with percentages of (58.6%), (31%) and (10.3%), respectively. No significant differences were found between the groups for any of the skeletal, dental, and soft tissue cephalometric variables. CONCLUSIONS: ADHD affected adolescents have similar craniofacial characteristics, but narrower upper airway dimensions compared to controls. Further investigations with larger samples are warranted to further elucidate the relationship between SDB and ADHD.

Orthodontic-orthognathic surgical treatment may not be a major risk factor for gingival recession.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Mota de Paulo JP, Herbert de Oliveira Mendes F, Gonçalves Filho RT, Marçal FF. Combined Orthodontic-Orthognathic Approach for Dentofacial Deformities as a Risk Factor for Gingival Recession: A Systematic Review. J Oral Maxillofac Surg. 2020 Oct;78(10):1682-1691. doi:10.1016/j.joms.2020.05.040. Epub 2020 May 31. PMID: 32,615,098. SOURCE OF FUNDING: None declared TYPE OF STUDY/DESIGN: Systematic review.

Effect of over-the-counter whitening strips and toothpaste on shear bond strength of orthodontic brackets.

BACKGROUND: To investigate: 1) the effects of over-the-counter white strip enamel bleaching and 2-Step whitening toothpaste application on the shear bond strength of orthodontic brackets at 24-hours and 7-days post-bleaching latent period; and 2) the correlation between amount of bleaching and shear bond strength. MATERIAL AND METHODS: Sixty human premolar teeth were randomly assigned into two bleaching groups, white strip group treated with Crest® 3D WHITE™ LUXE Professional Effects Whitestrips (Proctor & Gamble, Greensboro, NC), and whitening toothpaste group, treated with Crest® 3D WHITE™ BRILLIANCE 2-Step Toothpaste (Proctor & Gamble, Greensboro, NC). The groups were further divided into 4 subgroups A, B, C, D (n=15 per group). Subgroups A and C were bonded 7 days after bleaching while subgoups B and D were bonded 24 hours after bleaching. Differences in shear bond strength between the subgroups and an unbleached control group (n=15) were compared using the Kruskal-Wallis test. Spectrophotometric color changes were recorded pre- and post-bleaching. RESULTS: The mean shear bond strength for the white strip groups were 10.35±3.6 MPa and 11.69±4.33 MPa for the 7-day and 24-hour delayed bonding periods, respectively. Means for the whitening toothpaste groups were 11.01±4.31 MPa and 10.83±3.79 MPa for the 7-day and 24-hour delayed bonding periods. The mean for the control group was 9.59±3.32 MPa. There were no significant differences in shear bond strength between the groups at 7-days and 24-hour (P=0.650). There was a significant difference between teeth bleached with white strips as compared to those bleached with toothpaste and controls. The correlations between color change and shear bond strength were not significant (P=0.448). CONCLUSIONS: There is a significant difference in the amount of whitening achieved by over-the-counter white strips compared to toothpaste; however, no significant effects on shear bond strength occurred after bleaching with white strips and toothpaste at 24-hours and 7-days. Key words:Bleaching, shear bond strength, orthodontics, over-the-counter.

Rapid Maxillary Expansion May Improve Condyle-Fossa Relationship and Intercondylar Symmetry.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Effects of rapid maxillary expansion on temporomandibular joints: A systematic review. Torres D, Lopes J, Magno MB, Cople Maia L, Normando D, Leão PB. Angle Orthod. 2020 Feb 10. https://doi.org/10.2319/080619-517.1. Epub ahead of print. PMID: 32039632. SOURCE OF FUNDING: None. The authors have no actual or potential conflicts of interest. TYPE OF STUDY/DESIGN: Systematic review.

Diagnostic accuracy of lateral cephalograms and cone-beam computed tomography for the assessment of sella turcica bridging.

INTRODUCTION: The purpose of this research was to assess the diagnostic accuracy of sella turcica bridging on lateral cephalograms when compared with true sella turcica bridging determined via cone-beam computed tomography (CBCT). METHODS: A cross-sectional study was conducted using CBCT images from which lateral cephalograms were generated. The study included 185 subjects (118 females and 67 males; age range, 10-30 years; mean age, 16.63 ± 4.20 years). Sella turcica landmarks and related measurements were calculated for both diagnostic modalities and analyzed by 1 examiner. Subjects were classified into 1 of 3 outcome groups: no bridging, partial bridging, and complete bridging. Diagnostic accuracy was evaluated using sensitivity, specificity, positive and negative predictive values, and receiver operator characteristic curves. RESULTS: Ten patients were diagnosed as complete bridging on CBCT, whereas 31 patients were diagnosed as complete bridging on lateral cephalogram. Although the lateral cephalogram detected all subjects with complete bridging, it incorrectly classified 12% of subjects. The percent agreement between both diagnostic methods was 55.68%, with a kappa statistic of 0.22 on the right sella turcica and 0.20 on the left sella turcica, indicating fair but statistically significant agreement. The overall accuracy of lateral cephalograms as a diagnostic modality in discriminating between no bridging and partial bridging was good as determined with the area under the curve values of 0.86 and 0.85 for right and left sides, respectively. CONCLUSIONS: Although lateral cephalograms overestimate patients with complete bridging compared to CBCTs, they are a suitable screening modality for accurately suggesting complete sella turcica bridging and differentiating between patients with no bridging and partial bridging.

Temporomandibular Disorders and Their Association with Sleep Disorders in Adults: A Systematic Review.

AIMS: To investigate the associations between temporomandibular disorders (TMDs) and sleep disorders in adult subjects. METHODS: The PubMed, Embase, Evidence-Based Medicine Reviews, and ProQuest Dissertations & Theses databases were searched for studies published in English up to September 2019. Unpublished/gray literature and reference lists of identified articles were also examined. Inclusion criteria were male and female adults, presence or absence of a TMD based on the RDC/TMD or DC/TMD criteria, presence or absence of a sleep disorder according to the International Classification of Sleep Disorders, and any of the following study designs: cross-sectional, case-control, or longitudinal. Methodologic quality assessment was conducted using the National Heart, Lung, and Blood Institute quality assessment tools. RESULTS: Twenty-two studies (11 cross-sectional, 9 case-control, 1 prospective cohort, and 1 mixed design) met the inclusion criteria. TMDs were assessed independently in relation to sleep bruxism (SB), obstructive sleep apnea (OSA), and sleep quality (SQ). All studies but one assessed TMDs using the RDC/TMD criteria. The relation between the TMD and the different sleep disorders was conflicting for SB and positive for OSA and SQ. Five studies were of good quality, and 17 were of fair quality. CONCLUSIONS: The evidence is inconclusive regarding the relationship between TMDs and SB and insufficient regarding the relationship with OSA. There is consistently fair evidence to support an association between TMD and SQ. This study highlights the need for higher-quality longitudinal studies to clarify the association between TMDs and sleep disorders.

Additive 3-dimensional printing as a novel tool for pre- and postsurgical evaluation and patient education: A clinical case series.

BACKGROUND AND OVERVIEW: In contrast to subtractive 3-dimensional (3D) techniques synonymous with computer-aided design and computer-aided manufacturing, rapid progress in additive 3D printing, especially fused filament fabrication or fused deposition modeling, can change the practice of dentistry. CASE DESCRIPTION: In this article, the authors outline the digital workflow for fused filament fabrication and fused deposition modeling 3D printing that involves converting a Digital Imaging and Communications in Medicine file (scan or radiograph) to a printable Standard Triangle Language file that can be modified (additions or manipulations) using a readily accessible software for 3D printing. The authors also present a clinical case series showing various applications for this technique, including clinician and patient education, treatment planning, and posttreatment evaluations. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The low cost and simple workflow of additive 3D printing has potential to improve precision and efficiency in clinical dentistry for both academic and private practices.

Effects of Invisalign (G5) with virtual bite ramps for skeletal deep overbite malocclusion correction in adults.

OBJECTIVES: To investigate the skeletal and dentoalveolar effects of Invisalign's G5 protocol with virtual bite ramps in the treatment of adults with skeletal deep bites. MATERIALS AND METHODS: This retrospective study was conducted on consecutively treated adults presenting with skeletal deep bites as defined by the Overbite Depth Indicator (ODI). Subjects were divided into 2 groups: Invisalign group (n = 24) treated with the Invisalign G5 protocol and a full fixed appliance (FFA) group (n = 24) treated with edgewise FFAs and matched to the Invisalign group by ODI, sex, type of malocclusion, and non-extraction treatment. Pretreatment (T1) and post-comprehensive treatment (T2) lateral cephalograms were obtained and analyzed. RESULTS: Both the Invisalign and FFA groups showed significant changes from T1 to T2 in ODI and other skeletal and dentoalveolar measurements. The mean change in ODI was -1.5° (P < .001) for the Invisalign group and -2.0° (P < .001) for the FFA group. The mean decrease in overbite was 1.3 mm (P < .001) and 2.0 mm (P < .001) for the Invisalign and FFA groups, respectively. The mean increase in mandibular plane angle (Sn-GoGn) was 0.65° (P = .003) for the Invisalign group and 1.15° (P < .001) for the FFA group. When the groups were compared with each other, both ODI (P = .03) and overbite (P = .003) were significantly different in addition to other measurements. CONCLUSIONS: Although FFA treatment had more apparent skeletal changes for deep bite adult patients when compared with Invisalign, both systems were effective in opening deep bites at dentoalveolar and skeletal levels.

Correlation between craniofacial structures, anthropometric measurements, and nasopharyngeal dimensions in black adolescents.

OBJECTIVES: To evaluate the correlation between craniofacial structures, anthropometric measurements, and bony and soft tissue nasopharyngeal dimensions in African Black adolescents. METHODS: This retrospective cross-sectional study was conducted on 483 healthy adolescents (250 females and 233 males), randomly selected from one dental clinic. The inclusion criteria were skeletal and dental Class I, Black ethnicity, pubertal growth period as determined by the Greulich and Pyle atlas criteria, and no history of orthodontic treatment. Anthropometric measurements (stature, upper body height, lower body height, and BMI) and radiographic records (hand-wrist radiographs, and lateral cephalograms) were obtained. One investigator traced and analysed all cephalograms to determine three skeletal craniofacial parameters (maxillary length [Ar- ANS], mandibular length [Ar-Gn], and lower anterior facial height [ANS-Me]), and 14 (8 skeletal and 6 soft tissue) nasopharyngeal parameters. Pearson correlation coefficients and stepwise multiple linear regression analyses were conducted. RESULTS: The mean skeletal ages of females and males were 11.31±2.31y and 12.66±1.85y, respectively. Multiple linear regression analyses showed that stature, posterior height of nasal cavity (S-PNS), length of nasal floor (AA-PNS), and mean area of bony nasopharynx (Area 1) were significantly correlated with maxillary length, P<.001. Stature, BMI, S-PNS, vertical angle of nasopharynx (Ba-S-PNS), Area 1, adenoid height (AD), and linear hyoid bone measurements (H-AA, H-RGN, H-Ax) were all correlated with mandibular length, P<.05. Lower facial height showed sexual dimorphism and was significantly associated with vertical nasopharyngeal measurements, BMI and upper body height. CONCLUSIONS: Craniofacial structures were significantly associated with stature and upper body height. Maxillary growth was associated with bony nasopharyngeal variables. Mandibular growth and lower facial height were associated with bony and soft tissue nasopharyngeal variables. The sexual dimorphism in lower facial height warrants future studies to fully understand and manage the craniofacial complex and nasopharyngeal airway in African Black adolescents.

Long-term effects of the Forsus Device in Class II division I patients treated at pre-peak, peak, and post-peak growth periods: A retrospective study.

OBJECTIVES: To assess the long-term effects of the Forsus Fatigue Resistant Device (FFRD) for the correction of Class II division 1 malocclusion during pre-peak, peak, and post-peak growth periods. MATERIALS AND METHODS: This retrospective study was conducted on 60 patients that received FFRD with concurrent full-fixed orthodontic appliances during pre-peak (n=18), peak (n=21) and post-peak (n=21) maturational stages. The FFRD groups were compared with 60 untreated Class II control subjects obtained from the University of Michigan growth study and matched by skeletal age, sex, and observation periods. Lateral cephalograms were obtained at three time-points: [T1] pre-treatment; [T2] end of comprehensive orthodontic treatment; and [T3] retention (average of 3 years in retention). Nineteen linear and angular measurements were recorded. Short-term (T1- T2) and long-term (T1-T3) treatment changes were analyzed using paired Wilcoxon Signed Rank tests. RESULTS: In the pre-peak group, FFRD caused temporary restraint of maxillary growth and an increase in mandibular length at T1-T2 compared to controls. No significant differences were found at T2-T3 time points. The net changes (T1-T3) included a restraining effect on the maxilla and dentoalveolar compensation. In the peak group, maxillary restraint effect was seen at T1-T2, but this effect relapsed at T2-T3 time points. Similar to the pre-peak group, the net results (T1-T3) included maxillary headgear effect and dentoalveolar compensation. In the post-peak group, the net effects (T1-T3) of treatment included only dentoalveolar compensation. CONCLUSIONS: Overall, Class II malocclusion correction with FFRD is stable at three years post-treatment and is mainly achieved by maxillary restraint and dentoalveolar compensation at the pre-peak and peak stages and dentoalveolar compensation during the post-peak stage.

Secondary Alveolar Bone Graft Using Recombinant Human Bone Morphogenetic Protein-2 (rh-BMP2) May Be as Efficacious as Autologous Grafting in Unilateral Cleft Lip and Palate Patients.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Secondary alveolar bone grafting using autologous versus alloplastic material in the treatment of cleft lip and palate patients: systematic review and meta-analysis. Scalzone A, Flores-Mir C, Carozza D, d'Apuzzo F, Grassia V, Perillo L. Prog Orthod 2019;20(6):1-10. SOURCE OF FUNDING: The authors received no financial support for this study. TYPE OF STUDY/DESIGN: Systematic review and meta-analysis.