RESUMO
OBJECTIVE: Investigate the bioactivity and stability of Rhodiola rosea (RR) fractions as a natural source of prodelphinidin gallate (PDg) on dentin collagen via analysis of the viscoelastic and resin-dentin adhesive properties of the dentin matrix. METHODS: The biomimicry and stability of RR subfractions (F1, F2, F3 and F4) with collagen were determined by dynamic mechanical analysis (DMA). DMA used a strain sweep method to assess the dentin matrix viscoelastic properties [storage (E'), loss (E"), and complex (E*) moduli and tan δ] after treatment, 7-, 30- and 90-days of storage in simulated body fluids (SBF). Resin-dentin interface properties were assessed after 1 and 90-days in SBF by microtensile bond strength test and confocal laser scanning microscopy. Data were analyzed using two and one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: RR fractions increased dentin matrix complex (96 - 69 MPa) and storage (95 - 68 MPa) moduli, compared to the control (â¼9 MPa) in the ranking order: F2 ≥ F3 = F1 = F4 > control (p < 0.001). Treatment did not affect tan δ values. After 30- and 90-days, RR-treated dentin E*, E' and tan δ decreased (p < 0.001). F2 fraction yielded the highest microtensile bond strength (43.9 MPa), compared to F1, F4 (35.9 - 31.7 MPa), and control (29 MPa). RR-treated interfaces mediated stable surface modifications and enhanced collagen-methacrylate resin interactions at the bioadhesive interface. SIGNIFICANCE: Prodelphinidin gallates from RR are potent and reasonably stable biomimetic agents to dentin. Higher potency of F2 fraction with the dentin matrix and the adhesive interface is associated with a degree of polymerization of 2-3 and gallo(yl) motifs.
Assuntos
Dentina , Teste de Materiais , Metacrilatos , Proantocianidinas , Resistência à Tração , Dentina/química , Dentina/efeitos dos fármacos , Proantocianidinas/farmacologia , Proantocianidinas/química , Metacrilatos/química , Humanos , Propriedades de Superfície , Microscopia Confocal , Colagem Dentária , Adesivos Dentinários/química , Técnicas In Vitro , Viscosidade , Colágeno/química , ElasticidadeRESUMO
Flavan-3-ol monomers are the building blocks of proanthocyanidins (PACs), natural compounds from plants shown to mediate specific biologic activities on dentin. While the stereochemistry of the terminal flavan-3-ols, catechin (C) versus epicatechin (EC), impacts the biomechanical properties of the dentin matrix treated with oligomeric PACs, structure-activity relationships driving this bioactivity remain elusive. To gain insights into the modulatory role of the terminal monomers, two highly congruent trimeric PACs from Pinus massoniana only differing in the stereochemistry of the terminal unit (Trimer-C vs. Trimer-EC) were prepared to evaluate their chemical characteristics as well as their effects on the viscoelasticity and biostability of biomodified dentin matrices via infrared spectroscopy and multi-scale dynamic mechanical analyses. The subtle alteration of C versus EC as terminal monomers lead to distinct immediate PAC-trimer biomodulation of the dentin matrix. Nano- and micro-dynamic mechanical analyses revealed that Trimer-EC increased the complex moduli (0.51 GPa) of dentin matrix more strongly than Trimer-C (0.26 GPa) at the nanoscale length (p < 0.001), whereas the reverse was found at the microscale length (p < .001). The damping capacity (tan δ) of dentin matrix decreased by 70% after PAC treatment at the nano-length scale, while increased values were found at the micro-length scale (~0.24) compared to the control (0.18 ; p < .001). An increase in amide band intensities and a decrease of complex moduli was observed after storage in simulated body fluid for both Trimer-C and Trimer-EC modified dentin. The stereochemical configuration of the terminal monomeric units, C and EC, did not impact the chemo-mechanical stability of dentin matrix.
Assuntos
Catequina , Proantocianidinas , Flavonoides/farmacologia , Flavonoides/análise , Proantocianidinas/farmacologia , Proantocianidinas/análise , Proantocianidinas/química , Catequina/farmacologia , Dentina/químicaRESUMO
Proanthocyanidins (PACs) are complex flavan-3-ol polymers with stunning chemical complexity due to oxygenation patterns, oxidative phenolic ring linkages, and intricate stereochemistry of their heterocycles and inter-flavan linkages. Being promising candidates for dental restorative biomaterials, trace analysis of dentin bioactive cinnamon PACs now yielded novel trimeric (1 and 2) and tetrameric (3) PACs with unprecedented o- and p-benzoquinone motifs (benzoquinonoid PACs). Challenges in structural characterization, especially their absolute configuration, prompted the development of a new synthetic-analytical approach involving comprehensive spectroscopy, including NMR with quantum mechanics-driven 1H iterative functionalized spin analysis (HifSA) plus experimental and computational electronic circular dichroism (ECD). Vital stereochemical information was garnered from synthesizing 4-(2,5-benzoquinone)flavan-3-ols and a truncated analogue of trimer 2 as ECD models. Discovery of the first natural benzoquinonoid PACs provides new evidence to the experimentally elusive PAC biosynthesis as their formation requires two oxidative post-oligomerizational modifications (POMs) that are distinct and occur downstream from both quinone-methide-driven oligomerization and A-type linkage formation. While Nature is known to achieve structural diversity of many major compound classes by POMs, this is the first indication of PACs also following this common theme.
Assuntos
Proantocianidinas , Proantocianidinas/química , Fenóis , Espectroscopia de Ressonância Magnética , Dicroísmo CircularRESUMO
Investigation of a pine bark extract for bioactive proanthocyanidin oligomers resulted in the isolation of structurally related dimeric seco B-type procyanidin derivatives, 1-5. This includes scalemic mixtures of gambiriin A1 (1a) and A2 (2a) and their newly described optical antipodes, ent-gambiriin A1 (1b) and ent-gambiriin A2 (2b), respectively, as well as a racemic mixture of the newly described (ent-)gambiriin A5 (3a/3b). Furthermore, the study now fully characterizes the previously reported optically pure dimers gambiriin B1 (4) and gambirflavan D1 (5), and characterized the novel seco B-type procyanidin trimer, 6 (gambirifuran C1). Thermal conversion of catechin in aqueous solution provided further evidence for the structures of 1-6 and led to the purification of semisynthetic 1a and 2a as well as additional dimers 7-10. Elucidating the structures of the natural dimers, 1-5, from comprehensive NMR and ECD data and synthetic evidence provided crucial reference points for establishing the structure of the seco B-type procyanidin trimer, 6. Serving as assigned building blocks, data from the dimers supported the 3D structural assignment of 6 based on NMR substituent chemical shift differences (s.c.s., syn. ΔδC) and component-based empirical ECD calculations. Within the newly characterized series of PAC-related molecules, 5 exhibited high dentin biomodification potential. In addition, considering the nomenclature issues and plausible biosynthetic pathways of this group of compounds led to a consolidated nomenclature of all currently known seco B-type procyanidins. These findings, thereby, expand the chemical space of bioactive catechin oligomers, which have promise as agents for the natural enhancement of dental biomaterials. Finally, the current knowledge of the chemical space of seco B-type procyanidin derivatives was compiled to the level of absolute configuration.
Assuntos
Biflavonoides , Catequina , Pinus , Proantocianidinas , Proantocianidinas/química , Catequina/química , Biflavonoides/químicaRESUMO
OBJECTIVES: To compare the biodegradability, mechanical behavior, and physicochemical features of the collagen-rich extracellular matrix (ECM) of artificial caries-affected dentin (ACAD), natural caries-affected dentin (NCAD) and sound dentin (SD). METHODS: Dentin specimens from human molars were prepared and assigned into groups according to the type of dentin: ACAD, NCAD, or SD. ACAD was produced by incubation of demineralized SD with Streptococcus mutans in a chemically defined medium (CDM) with 1% sucrose for 7 days at 37 °C under anaerobic conditions. Specimens were assessed to determine collagen birefringence, biodegradability, mechanical behavior, and chemical composition. Data were individually processed and analyzed by ANOVA and post-hoc tests (α = 0.05). RESULTS: CDM-based biofilm challenge reduced loss, storage, and complex moduli in ACAD (p < 0.001), while the damping capacity remained unaffected (p = 0.066). Higher red and lower green birefringence were found in ACAD and NCAD when compared with SD (p < 0.001). Differently to ACAD, SD and NCAD presented higher biodegradability to exogenous proteases (p = 0.02). Chemical analysis of the integrated areas of characteristic bands that assess mineral quality (carbonate/phosphate and crystallinity index), mineral to matrix (phosphate/amide I) and post-translational modifications (amide III/CH2, pentosidine/CH2, and pentosidine/amide III) (p<0.05) showed that NCAD was significantly different from SD while ACAD exhibited intermediate values. CONCLUSIONS: CDM-based biofilm challenge produced a dentin ECM with decreased mechanical properties and increased collagen maturity. The compositional and structural conformation of the ACAD suggested that CDM-based biofilm challenge showed potential to produce artificial lesions by revealing a transitional condition towards mimicking critical features of NCAD. CLINICAL SIGNIFICANCE: This study highlights the importance of developing a tissue that mimics the features of natural caries-affected dentin ECM for in vitro studies. Our findings suggested the potential of a modified biofilm challenge protocol to produce and simulate a relevant substrate, such as caries-affected dentin.
Assuntos
Cárie Dentária , Adesivos Dentinários , Humanos , Adesivos Dentinários/química , Dentina/química , Suscetibilidade à Cárie Dentária , Cárie Dentária/patologia , Colágeno/análise , Fosfatos , Amidas/análiseRESUMO
To enable translational studies, a scalable preparative isolation scheme was developed for underivatized cocoa (Theobroma cacao) proanthocyanidins (PACs), affording six all-B-type oligomeric PACs, including a new tetramer 4. Their structures, including absolute configuration, were unambiguously established by comprehensive spectroscopic and chemical methods. Evaluation of the PACs' dentin biomodification properties employed dynamic mechanical and infrared spectroscopic analyses in dentin bioassay models. PAC treatment enhanced the biomechanical strength of dentin by 5- to 15-fold compared to untreated dentin. Among the PAC agents, the pentamer, cinnamtannin A3 (6), led to the highest complex modulus value of 131 MPa, whereas the "branched" tetramer, 4, showed the lowest, yet still significant bioactivity. This study of specifically singly linked medium-length oligomeric PACs indicates that the linkage site is paramount in determining the potency of these PACs as dentin biomodifiers.
Assuntos
Cacau , Proantocianidinas , Antioxidantes/análise , Cacau/química , Dentina/química , Proantocianidinas/químicaRESUMO
To enable the further exploration of structure-activity relationships (SARs) of proanthocyanidins (PACs) with dentin biomodification abilities, Cinnamomum verum was selected for scaled-up purification of mixed A-/B-type, medium-size PAC oligomers. Sequential purification by centrifugal partition chromatography (CPC), Sephadex LH-20, and semiprep HPLC chromatography yielded four underivatized tetrameric (5-8) and two pentameric (9-10) PACs. Their unambiguous structural characterization involved extensive spectral and chemical degradation approaches to show that epicatechin units are connected by plant-specific combinations of doubly linked A- and singly linked B-type interflavanyl bonds. The biomechanical properties (via dynamic mechanical analysis) and physicochemical structure (via infrared spectroscopy) were assessed to evaluate the biomodification potency of PAC-treated collagen in a preclinical dentin model. This study revealed that (4â8) versus (4â6) bonds in PAC interflavan linkages have limited influence on biomechanical outcomes of dentin. By exhibiting a 25-fold increase in the complex modulus of treated dentin compared to control, aesculitannin E (5) was found to be the most potent PAC known to date for enhancing the mechanical properties of dentin in this preclinical model.
Assuntos
Catequina , Proantocianidinas , Catequina/análise , Cinnamomum zeylanicum/química , Dentina/química , Casca de Planta/química , Proantocianidinas/químicaRESUMO
OBJECTIVES: To determine the long-term effect on the stability of dentin-resin interfaces after the addition of polylactide (PLA) capsules containing proanthocyanidin (PAC) to adhesive resin. METHODS: Sub-micron (SM) and micron (M) size capsules containing PACs were produced using a combination of emulsification and solvent evaporation techniques and characterized. Human dentin surfaces (n = 8) were etched (35% glycolic acid) and primed (15% enriched Vitis vinifera extract solution - VVe), followed by the application of an experimental adhesive containing 0 (control), 1.5 wt% of SM or M PAC-filled PLA capsules light cured for 40 s. A crown was built using commercial composite. After 24 h-immersion (37 °C) in simulated body fluid, specimens were serially sectioned into resin-dentin beams. Microtensile bond strength (TBS), micro-permeability and fracture pattern were assessed immediately and after 1 and 2 years. Data were statistically analyzed using two-way ANOVA and post-hoc test (α = 0.05). RESULTS: Polydisperse capsules were manufactured with average diameter of 0.36 µm and 1.08 µm for SM and M, respectively. The addition of capsules did not affect TBS (p = 0.889). After 2 years, TBS significantly decreased in SM (p = 0.006), whereas M showed similar initial values (p = 0.291). Overall, less micro-permeability was found in M than the control and SM group (p < 0.001). After 2 years, fractured surfaces from capsule-containing groups failed within the adhesive layer while control fractured at the bottom of the hybrid layer. SIGNIFICANCE: The addition of PAC-filled PLA microcapsules in a dental adhesive did not affect the bond strength while increased and sustained the protection against micro-permeability in the interface, likely due to release of PACs.
Assuntos
Colagem Dentária , Proantocianidinas , Resinas Compostas/química , Cimentos Dentários , Dentina , Adesivos Dentinários/química , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura , Proantocianidinas/química , Cimentos de Resina/química , Resistência à TraçãoRESUMO
The dentin matrix is a collagenous scaffold structurally involved in anchoring resin-based materials to the tooth. Time-dependent degradation of this scaffold at the resin-dentin interface remains a core problem in adhesive dentistry, limiting the service life of dental fillings. This study explored the use of emergent materials termed metal-organic frameworks (MOFs)âformed by the self-assembly of metal ions and organic building blocksâto safeguard the collagen integrity in the functional dentin matrix. We demonstrate that collagen fibrils (from demineralized human dentin) can induce the biomimetic growth of MOF crystals as protective coatings to strengthen and stabilize the fibrils. Zeolitic imidazolate framework-8 (ZIF-8), a zinc-based microporous MOF, was used to fabricate the MOF composites via a "one-pot" reaction in water. The ZIF-modified dentin matrix presented superior mechanical strength and resistance to proteolysis, which can positively affect the longevity of collagen as an anchoring substrate. This work identifies a potential biomedical application of biomimetically synthesized MOFs in repairing dental tissues critical to restorative therapies.
Assuntos
Estruturas Metalorgânicas , Zeolitas , Biomimética , Colágeno/química , Dentina/química , Dentina/metabolismo , Humanos , Estruturas Metalorgânicas/farmacologiaRESUMO
Aging is a physiological process with profound impact on the biology and function of biosystems, including the human dentition. While resilient, human teeth undergo wear and disease, affecting overall physical, psychological, and social human health. However, the underlying mechanisms of tooth aging remain largely unknown. Root dentin is integral to tooth function in that it anchors and dissipates mechanical load stresses of the tooth-bone system. Here, we assess the viscoelastic behavior, composition, and ultrastructure of young and old root dentin using nano-dynamic mechanical analysis, micro-Raman spectroscopy, small angle X-ray scattering, atomic force and transmission electron microscopies. We find that the root dentin overall stiffness increases with age. Unlike other mineralized tissues and even coronal dentin, however, the ability of root dentin to dissipate energy during deformation does not decay with age. Using a deconstruction method to dissect the contribution of mineral and organic matrix, we find that the damping factor of the organic matrix does deteriorate. Compositional and ultrastructural analyses revealed higher mineral-to-matrix ratio, altered enzymatic and non-enzymatic collagen cross-linking, increased collagen d-spacing and fibril diameter, and decreased abundance of proteoglycans and sulfation pattern of glycosaminoglycans . Therefore, even in the absence of remodeling, the extracellular matrix of root dentin shares traits of aging with other tissues. To explain this discrepancy, we propose that altered matrix-mineral interactions, possibly mediated by carbonate ions sequestered at the mineral interface and/or altered glycosaminoglycans counteract the deleterious effects of aging on the structural components of the extracellular matrix. STATEMENT OF SIGNIFICANCE: Globally, a quarter of the population will be over 65 years old by 2050. Because many will retain their dentition, it will become increasingly important to understand and manage how aging affects teeth. Dentin is integral to the protective, biomechanical, and regenerative features of teeth. Here, we demonstrate that older root dentin not only has altered mechanical properties, but shows characteristic shifts in mineralization, composition, and post-translational modifications of the matrix. This strongly suggests that there is a mechanistic link between mineral and matrix components to the biomechanical performance of aging dentin with implications for efforts to slow or even reverse the aging process.
Assuntos
Dentina , Raiz Dentária , Idoso , Matriz Extracelular , Humanos , Minerais , ProteoglicanasRESUMO
Plant-derived proanthocyanidins (PACs) mediate physicochemical modifications to the dentin extracellular matrix (ECM). The structure-activity relationships of PACs remain largely unknown, mostly due to the varied complex composition of crude extracts, as well as the challenges of purification and mechanistic assessment. To assess the role of galloylated PACs as significant contributors to high yet unstable biomodification activity to the dentin ECM, we removed the galloyl moieties (de-galloylation) via enzymatic hydrolysis from three galloyl-rich PAC-containing extracts (Camellia sinensis, Vitis vinifera, and Hamamelis virginiana). The biomechanical and biological properties of dentin were assessed upon treatment with these extracts vs. their de-galloylated counterparts. An increase in the complex modulus of the dentin matrix was found with all extracts, however, the crude extract was significantly higher when compared to the de-galloylated version. Exhibiting the highest content of galloylated PACs among the investigated plants, Camellia sinensis crude extract also exhibited the biggest relapse in mechanical properties after one-month incubation. De-galloylation did not modify the damping capacity of dentin ECM. Moreover, PAC-mediated protection against proteolytic degradation was unaffected by de-galloylation. The de-galloylation experiments confirmed that gallic acid in galloylated rich-PAC extracts drive stronger yet significantly less sustained mechanical effects in dentin ECM.
Assuntos
Proantocianidinas , Colágeno/análise , Dentina/química , Matriz Extracelular , Proantocianidinas/análise , Proantocianidinas/química , Proantocianidinas/farmacologiaRESUMO
OBJECTIVE: To elucidate the structure-activity relationships (SARs) of proanthocyanidins (PACs) with type I collagen using sixteen chemically defined PACs with degree of polymerization (DP) 2-6. METHODS: Under a dentin model, the biomimicry of PACs with type I collagen was investigated by dynamic mechanical analysis (DMA) and infrared spectroscopy. The dentin matrix was modified with PACs from Pinus massoniana [monomers (Mon-1 and Mon-2), dimers (Dim-1-Dim-4), trimers (Tri-1-Tri-4), tetramers (Tet-1-Tet-5), and hexamer (Hex-1)]. A strain sweep method in a 3-point bending submersion clamp was used to assess the viscoelastic properties [storage (E'), loss (E"), and complex moduli (E*) and tan δ] of the dentin matrix before and after biomodification. Biochemical analysis of the dentin matrix was assessed with FTIR spectroscopy. Data were statistically analyzed using one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: DP had a significant effect on modified dentin moduli (tetramers ≈ trimers > hexamers ≈ dimers > monomers ≈ control, p < 0.001). Trimers and tetramers yielded 6- to 8-fold increase in the mechanical properties of modified dentin and induced conformational changes to the secondary structure of collagen. Modifications to the tertiary structure of collagen was shown in all PAC modified-dentin matrices. SIGNIFICANCE: Findings establish three key SARs: (i) increasing DP generally enhances biomimicry potential of PACs in modulating the mechanical and chemical properties of dentin (ii) the secondary structure of dentin collagen is affected by the position of B-type inter-flavanyl linkages (4ß â 6 and 4ß â 8); and (iii) the terminal monomeric flavan-3-ol unit plays a modulatory role in the viscoelasticity of dentin.
Assuntos
Colágeno/química , Dentina/química , Proantocianidinas , Proantocianidinas/química , Relação Estrutura-AtividadeRESUMO
The use of polymer additives that stabilize fluidic amorphous calcium phosphate is key to obtaining intrafibrillar mineralization of collagen in vitro. On the other hand, this biomimetic approach inhibits the nucleation of mineral crystals in unconfined extrafibrillar spaces, that is, extrafibrillar mineralization. The extrafibrillar mineral content is a significant feature to replicate from hard connective tissues such as bone and dentin as it contributes to the final microarchitecture and mechanical stiffness of the biomineral composite. Herein, we report a straightforward route to produce densely mineralized collagenous composites via a surface-directed process devoid of the aid of polymer additives. Simulated body fluid (1×) is employed as a biomimetic crystallizing medium, following a preloading procedure on the collagen surface to quickly generate the amorphous precursor species required to initiate matrix mineralization. This approach consistently leads to the formation of extrafibrillar bioactive minerals in bulk collagen scaffolds, which may offer an advantage in the production of osteoconductive collagen-apatite materials for tissue engineering and repair purposes.
Assuntos
Materiais Biocompatíveis/farmacologia , Líquidos Corporais/efeitos dos fármacos , Engenharia Tecidual , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Colágeno/síntese química , Colágeno/química , Colágeno/farmacologia , Humanos , Teste de Materiais , Tamanho da Partícula , Propriedades de Superfície , Alicerces Teciduais/químicaRESUMO
OBJECTIVES: To develop a protocol for assessment of the bulk viscoelastic behavior of dentin extracellular matrix (ECM), and to assess relationships between induced collagen cross-linking and viscoelasticity of the dentin ECM. METHODS: Dentin ECM was treated with agents to induce exogenous collagen cross-linking: proanthocyanidins (PACs) from Vitis vinifera - VVe, PACs from Pinus massoniana - PMe, glutaraldehyde - (GA), or kept untreated (control). A dynamic mechanical strain sweep method was carried out in a 3-point bending submersion clamp at treatment; after protein destabilization with 4 M urea and after 7-day, 6-month, and 12-month incubation in simulated body fluid. Tan δ, storage (E'), loss (E"), and complex moduli (E*) were calculated and data were statistically analyzed using two-way ANOVA and post-hoc tests (α = 0.05). Chemical analysis of dentin ECM before and after protein destabilization was assessed with ATR-FTIR spectroscopy. RESULTS: Significant interactions between study factors (treatment vs. time points, p < 0.001) were found for all viscoelastic parameters. Despite a significant decrease in all moduli after destabilization, PAC-treated dentin remained statistically higher than control (p < 0.001), indicating permanent mechanical enhancement after biomodification. Covalently crosslinked, GA-treated dentin was unaffected by destabilization (p = 0.873) and showed the lowest damping capacity (tan δ) at all time points (p < 0.001). After 12 months, the damping capacity of PMe and VVe groups decreased significantly. Changes in all amide IR resonances revealed a partial chemical reversal of PAC-mediated biomodification. SIGNIFICANCE: Viscoelastic measurements and IR spectroscopy aid in elucidating the role of inter-molecular collagen cross-linking in the mechanical behavior of dentin ECM.
Assuntos
Extrato de Sementes de Uva , Proantocianidinas , Colágeno , Dentina , Matriz Extracelular , Proantocianidinas/farmacologiaRESUMO
An investigation of the dental bioactive proanthocyanidin (PAC) oligomer fractions led to three structurally distinct new PACs (1-3) from pine bark. Pinutwindoublin (1) is the first reported trimer with double A-type interflavanyl linkages (2αâOâ5,4αâ6 and 2αâOâ7,4αâ8). Pinuspirotetrin (2) represents the first reported PAC tetramer with a heterodimeric framework consisting of one spiro-type and one A-type dimer. Pinumassohexin (3) was elucidated as a mixed A + B-type hexamer that consists of a peanut-derived tetramer, peanut procyanidin E, and an A-type dimer (5). Compound 3 increased the modulus of elasticity of dentin by an impressive 4.3 times at a concentration of 0.65%.
Assuntos
Pinus/química , Proantocianidinas/química , Compostos de Espiro/química , Dimerização , Elasticidade , Modelos Moleculares , Conformação MolecularRESUMO
Guided by dentin biomechanical bioactivity, this phytochemical study led to the elucidation of an extended set of structurally demanding proanthocyanidins (PACs). Unambiguous structure determination involved detailed spectroscopic and chemical characterization of four A-type dimers (2 and 4-6), seven trimers (10-16), and six tetramers (17-22). New outcomes confirm the feasibility of determining the absolute configuration of the catechol monomers in oligomeric PACs by one-dimensional (1D) and two-dimensional (2D) NMR. Electronic circular dichroism as well as phloroglucinolysis followed by mass spectrometry and chiral phase high-performance liquid chromatography (HPLC) analysis generated the necessary chiral reference data. In the context of previously reported dentin-bioactive PACs, accurately and precisely assigned 13C NMR resonances enabled absolute stereochemical assignments of PAC monomers via (i) inclusion of the 13C NMR γ-gauche effect and (ii) determination of differential 13C chemical shift values (ΔδC) in comparison with those of the terminal monomer (unit II) in the dimers 2 and 4-6. Among the 13 fully elucidated PACs, eight were identified as new, and one structure (11) was revised based on new knowledge gained regarding the subtle, stereospecific spectroscopic properties of PACs.
Assuntos
Pinus , Proantocianidinas , Cromatografia Líquida de Alta Pressão , Dentina , Espectrometria de MassasRESUMO
OBJECTIVES: Proanthocyanidins (PACs) are biocompounds mimicking native collagen cross-links. The effective and practical delivery of any biocompound is pivotal for clinical usage. The aim was to investigate the dentin biomodification and effective formation of dentin-resin biointerfaces of two highly bioactive PAC-rich extracts, Vitis vinifera (Vv) and Camellia sinensis (Cs), delivered using neutral (NP) or acidic (AP) rinse-out primer approaches. METHODS: The depth of dentin demineralization (optical profilometry), dentin biomodification (apparent modulus of elasticity, collagen auto-fluorescence) and properties of dentin-resin interfaces (microtensile bond strength - µTBS, and micro-permeability) were investigated. NP consisted of either 15% Vv or Cs applied for 60â¯s after surface etching; while AP contained 15% Vv or Cs in either 35% glycolic acid or tartaric acid applied for 30â¯s or 60â¯s. Data were analyzed using ANOVA and post-hoc tests (αâ¯=â¯0.05). RESULTS: The depth of demineralization was statistically higher when applied for 60â¯s, regardless of rinse-out primer approach (pâ¯<â¯0.001). Compared to the AP strategy, NP exhibited statistically higher apparent modulus of elasticity, regardless of PAC extract (pâ¯<â¯0.001). Highest µTBS were obtained for NPVv, which were statistically similar to APGAVv, when applied for 60â¯s (pâ¯<â¯0.001); both resulted in a dramatic decrease of the interfacial permeability. NPCs group showed the lowest µTBS (pâ¯<â¯0.001). CONCLUSIONS: A combination of high bond strength and low micro-permeability can be accomplished using glycolic acid with the mid- and high-PAC oligomer enriched extract (Vv). Cs extract containing mostly catechins and dimeric PACs, was found unsuitable for resin-dentin adhesion despite exhibiting high initial dentin biomodification. CLINICAL SIGNIFICANCE: This study provides a new conceptual delivery of PAC-mediated dentin biomodification and conservative dentin surface etching using rinse-out primers. The strategy requires a specific combination of PAC source, α-hydroxy acid, and application time.
Assuntos
Catequina , Colagem Dentária , Proantocianidinas , Catequina/farmacologia , Colágeno , Dentina , Adesivos Dentinários , Teste de Materiais , Proantocianidinas/farmacologia , Cimentos de Resina , Propriedades de Superfície , Resistência à TraçãoRESUMO
This study investigated the contribution of small leucine rich proteoglycans (SLRPs) to the fracture toughness of the dentin extracellular matrix (ECM) by enzymatically-assisted selective removal of glycosaminoglycan chains (GAGs) and proteoglycans (PGs) core protein. We adapted the Mode III trouser tear test to evaluate the energy required to tear the dentin ECM. Trouser-shaped dentin specimens from crown and root were demineralized. Depletion of GAGs and PGs followed enzymatic digestion using chondroitinase ABC (c-ABC) and matrix metalloproteinase 3 (MMP-3), respectively. The legs from specimen were stretched under tensile force and the load at tear propagation was determined to calculate the tear energy (T, kJ/m2). SLRPs decorin and biglycan were visualized by immunohistochemistry and ECM tear pattern was analyzed in SEM. Results showed T of crown ECM was not affected by PGs/GAGs depletion (p = 0.799), whereas the removal of PGs significantly reduced T in root dentin ECM (p = 0.001). Root dentin ECM exhibited higher T than crown (p < 0.03), however no regional difference are present after PG depletion (p = 0.480). Immunohistochemistry confirmed removal of GAGs and PGs. SEM images showed structural modifications after PGs/GAGs removal such as enlargement of dentinal tubules, increased interfibrillar spaces and presence of untwisted fibrils with increased diameter. Findings indicate that the capacity of the PGs to unfold and untwist contribute to the dentin ECM resistance to tear, possibly influencing crack growth propagation. The regional differences are likely an evolutionary design to increase tooth survival, that undergoes repetitive mechanical loading and load stress dissipation over a lifetime of an individual.
Assuntos
Dentina/citologia , Dentina/lesões , Matriz Extracelular/metabolismo , Glicosaminoglicanos/metabolismo , Fenômenos Biomecânicos , Humanos , Fenômenos MecânicosRESUMO
Collagen glycation takes place under physiological conditions during chronological aging, leading to the formation of advanced glycation end-products (AGEs). AGEs accumulation induces non-enzymatic collagen cross-links increasing tissue stiffness and impairing function. Here, we focused on determining the cumulative effect of induced glycation on the mechanical behavior of highly collagen cross-linked dentin matrices and assess the topical inhibition potential of aminoguanidine. Bulk mechanical characterization suggests that early glycation cross-links significantly increase the tensile strength and stiffness of the dentin matrix and promote a brittle failure response. Histologically, glycation yielded a more mature type I collagen in a densely packed collagen matrix. The time-dependent effect of glycation indicates cumulative damage of dentin matrices that is partially inhibited by aminoguanidine. The regional dentin sites were differently affected by induced-glycation, revealing the crown dentin to be mechanically more affected by the glycation protocol. These findings in human dentin set the foundation for the proposed in vitro ribose-induced glycation model, which produces an early matrix stiffening mechanism by reducing tissue viscoelasticity and can be partially inhibited by topical aminoguanidine.
Assuntos
Colágeno , Produtos Finais de Glicação Avançada , Colágeno/metabolismo , Dentina/metabolismo , Produtos Finais de Glicação Avançada/metabolismo , Glicosilação , Humanos , Resistência à TraçãoRESUMO
The aim of the study was to evaluate the effect of experimental composites containing dicalcium phosphate dihydrate (DCPD) on remineralization of enamel lesions. Five resin-based composites containing equal parts (in mols) of bisphenol-A glycidyl dimethacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), and 60 vol % of fillers were manipulated. Filler phase was constituted by silanized barium glass and 0, 10, or 20 vol % of DPCD particles, either functionalized (F) or nonfunctionalized (NF) with TEGDMA. Artificial subsurface lesions were produced in human enamel fragments and divided according to the resin composite applied on the lesion (no DCPD, 20% NF, 20% F, 10% NF, 10% F) plus a group without composite build-up (nontreated, NT). Fragments were exposed to 16 days of pH cycling. Specimens were evaluated using transverse microradiography (TMR). Calcium and phosphate concentrations in pH-cycling solutions were determined by spectrophotometry. TMR and ionic concentrations were analyzed using one-way ANOVA/Tukey and Kruskal-Wallis/Dunn test, respectively (alpha: 0.05). All composite groups showed enamel remineralization (3%-23%). Higher mineral recovery in the middle (7%-11%) and bottom (2%-7%) thirds of the lesion was observed in groups with DCPD-containing composites compared to the "no DCPD" group (middle: 1%, bottom: -3%). Lesion depth was significantly reduced in groups using DCPD-containing composites compared to NT group. No noticeable increase in calcium and phosphate ions was observed in the pH-cycling solutions due to the presence of DCPD in the composites. In conclusion, composites with DCPD fractions as low as 10%, regardless of functionalization, were able to promote mineral recovery and reduce lesion depth of enamel lesions. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1542-1550, 2019.