RESUMO
Success of the UK's Spherical Tokamak for Energy Production (STEP) programme requires a robust plasma control system. This system has to guide the plasma from initiation to the burning phase, maintain it there, produce the desired fusion power for the desired duration and then terminate the plasma safely. This has to be done in a challenging environment with limited sensors and without overloading plasma-facing components. The plasma parameters and the operational regime in the STEP prototype will be very different from tokamaks, which are presently in operation. During fusion burn, the plasma regime in STEP will be self-organizing, adding further complications to the plasma control system design. This article describes the work to date on the design of individual controllers for plasma shape and position, magneto hydrodynamic instabilities, heat load and fusion power. Having studied 'normal' operation, the article discusses the philosophy of how the system will handle exceptions, when things do not go exactly as planned. This article is part of the theme issue 'Delivering Fusion Energy - The Spherical Tokamak for Energy Production (STEP)'.
RESUMO
In this work, an automated apparatus for driving single electrostatic probes and acquiring the plasma-related data has been designed and fabricated. The voltage range of the present system is ±110 V with an adjustable voltage step as low as 3 mV. Voltage and current measurements are carried out with high resolution and high accuracy circuits, both based on 16 bit analog-to-digital converters. The code embedded in a micro-controller, schedules the operation of the device and transfers the experimental data to a personal computer. The modular design of the system makes possible its modification and thus increases its adaptability to different plasma setups. Finally, the reliable operation of the entire device is confirmed by tests in Electron Cyclotron Resonance plasma.