Enhancing the brain MRI at ultra-high field systems using a meta-array structure.

BACKGROUND: The main advantage of ultra-high field (UHF) magnetic resonance neuroimaging is theincreased signal-to-noise ratio (SNR) compared with lower field strength imaging. However, the wavelength effect associated with UHF MRI results in radiofrequency (RF) inhomogeneity, compromising whole brain coverage for many commercial coils. Approaches to resolving this issue of transmit field inhomogeneity include the design of parallel transmit systems (PTx), RF pulse design, and applying passive RF shimming such as high dielectric materials. However, these methods have some drawbacks such as unstable material parameters of dielectric pads, high-cost, and complexity of PTx systems. Metasurfaces are artificial structures with a unique platform that can control the propagation of the electromagnetic (EM) waves, and they are very promising for engineering EM device. Implementation of meta-arrays enhancing MRI has been explored previously in several studies. PURPOSE: The aim of this study was to assess the effect of new meta-array technology on enhancing the brain MRI at 7T. A meta-array based on a hybrid structure consisting of an array of broadside-coupled split-ring resonators and high-permittivity materials was designed to work at the Larmor frequency of a 7 Tesla (7T) MRI scanner. When placed behind the head and neck, this construct improves the SNR in the region of the cerebellum,brainstem and the inferior aspect of the temporal lobes. METHODS: Numerical electromagnetic simulations were performed to optimize the meta-array design parameters and determine the RF circuit configuration. The resultant transmit-efficiency and signal sensitivity improvements were experimentally analyzed in phantoms followed by healthy volunteers using a 7T whole-body MRI scanner equipped with a standard one-channel transmit, 32-channel receive head coil. Efficacy was evaluated through acquisition with and without the meta-array using two basic sequences: gradient-recalled-echo (GRE) and turbo-spin-echo (TSE). RESULTS: Experimental phantom analysis confirmed two-fold improvement in the transmit efficiency and 1.4-fold improvement in the signal sensitivity in the target region. In vivo GRE and TSE images with the meta-array in place showed enhanced visualization in inferior regions of the brain, especially of the cerebellum, brainstem, and cervical spinal cord. CONCLUSION: Addition of the meta-array to commonly used MRI coils can enhance SNR to extend the anatomical coverage of the coil and improve overall MRI coil performance. This enhancement in SNR can be leveraged to obtain a higher resolution image over the same time slot or faster acquisition can be achieved with same resolution. Using this technique could improve the performance of existing commercial coils at 7T for whole brain and other applications.

Multimodal Assessment of Bottlenose Dolphin Auditory Nuclei Using 7-Tesla MRI, Immunohistochemistry and Stereology.

The importance of assessing neurochemical processes in the cetacean brain as a tool for monitoring their cognitive health and to indirectly model human neurodegenerative conditions is increasingly evident, although available data are largely semiquantitative. High-resolution MRI for post-mortem brains and stereology allow for quantitative assessments of the cetacean brain. In this study, we scanned two brains of bottlenose dolphins in a 7-Tesla (7T) MR scanner and assessed the connectivity of the inferior colliculi and ventral cochlear nuclei using diffusion tensor imaging (DTI). Serial thick sections were investigated stereologically in one of the dolphins to generate rigorous quantitative estimates of identifiable cell types according to their morphology and expression of molecular markers, yielding reliable cell counts with most coefficients of error <10%. Fibronectin immunoreactivity in the dolphin resembled the pattern in a human chronic traumatic encephalopathy brain, suggesting that neurochemical compensation for insults such as hypoxia may constitute a noxious response in humans, while being physiological in dolphins. These data contribute to a growing body of knowledge on the morphological and neurochemical properties of the dolphin brain and highlight a stereological and neuroimaging workflow that may enable quantitative and translational assessment of pathological processes in the dolphin brain in the future.

Evidence of traumatic brain injury in headbutting bovids.

Traumatic brain injury (TBI) is a leading cause of neurologic impairment and death that remains poorly understood. Rodent models have yet to produce clinical therapies, and the exploration of larger and more diverse models remains relatively scarce. We investigated the potential for brain injury after headbutting in two combative bovid species by assessing neuromorphology and neuropathology through immunohistochemistry and stereological quantification. Postmortem brains of muskoxen (Ovibos moschatus, n = 3) and bighorn sheep (Ovis canadensis, n = 4) were analyzed by high-resolution MRI and processed histologically for evidence of TBI. Exploratory histological protocols investigated potential abnormalities in neurons, microglia, and astrocytes in the prefrontal and parietal cortex. Phosphorylated tau protein, a TBI biomarker found in the cerebrospinal fluid and in neurodegenerative lesions, was used to detect possible cellular consequences of chronic or acute TBI. MRI revealed no abnormal neuropathological changes; however, high amounts of tau-immunoreactive neuritic thread clusters, neurites, and neurons were concentrated in the superficial layers of the neocortex, preferentially at the bottom of the sulci in the muskoxen and occasionally around blood vessels. Tau-immunoreactive lesions were rare in the bighorn sheep. Additionally, microglia and astrocytes showed no grouping around tau-immunoreactive cells in either species. Our preliminary findings indicate that muskoxen and possibly other headbutting bovids suffer from chronic or acute brain trauma and that the males' thicker skulls may protect them to a certain extent.

Design, Construction, and Implementation of a Magnetic Resonance Elastography Actuator for Research Purposes.

Magnetic resonance elastography (MRE) is a technique for determining the mechanical response of soft materials using applied harmonic deformation of the material and a motion-sensitive magnetic resonance imaging sequence. This technique can elucidate significant information about the health and development of human tissue such as liver and brain, and has been used on phantom models (e.g., agar, silicone) to determine their suitability for use as a mechanical surrogate for human tissues in experimental models. The applied harmonic deformation used in MRE is generated by an actuator, transmitted in bursts of a specified duration, and synchronized with the magnetic resonance signal excitation. These actuators are most often a pneumatic design (common for human tissues or phantoms) or a piezoelectric design (common for small animal tissues or phantoms). Here, we describe how to design and assemble both a pneumatic and a piezoelectric MRE actuator for research purposes. For each of these actuator types, we discuss displacement requirements, end-effector options and challenges, electronics and electronic-driving requirements and considerations, and full MRE implementation. We also discuss how to choose the actuator type, size, and power based on the intended material and use. © 2022 Wiley Periodicals LLC. Basic Protocol 1: Design, construction, and implementation of a convertible pneumatic MRE actuator for use with tissues and phantom models Basic Protocol 2: Design, construction, and implementation of a piezoelectric MRE actuator for localized excitation in phantom models.

Intracardiac MR imaging (ICMRI) guiding-sheath with amplified expandable-tip imaging and MR-tracking for navigation and arrythmia ablation monitoring: Swine testing at 1.5 and 3T.

PURPOSE: Develop a deflectable intracardiac MR imaging (ICMRI) guiding-sheath to accelerate imaging during MR-guided electrophysiological (EP) interventions for radiofrequency (500 kHz) ablation (RFA) of arrythmia. Requirements include imaging at three to five times surface-coil SNR in cardiac chambers, vascular insertion, steerable-active-navigation into cardiac chambers, operation with ablation catheters, and safe levels of MR-induced heating. METHODS: ICMRI's 6 mm outer-diameter (OD) metallic-braided shaft had a 2.6 mm OD internal lumen for ablation-catheter insertion. Miniature-Baluns (MBaluns) on ICMRI's 1 m shaft reduced body-coil-induced heating. Distal section was a folded "star"-shaped imaging-coil mounted on an expandable frame, with an integrated miniature low-noise-amplifier overcoming cable losses. A handle-activated movable-shaft expanded imaging-coil to 35 mm OD for imaging within cardiac-chambers. Four MR-tracking micro-coils enabled navigation and motion-compensation, assuming a tetrahedron-shape when expanded. A second handle-lever enabled distal-tip deflection. ICMRI with a protruding deflectable EP catheter were used for MR-tracked navigation and RFA using a dedicated 3D-slicer user-interface. ICMRI was tested at 3T and 1.5T in swine to evaluate (a) heating, (b) cardiac-chamber access, (c) imaging field-of-view and SNR, and (d) intraprocedural RFA lesion monitoring. RESULTS: The 3T and 1.5T imaging SNR demonstrated >400% SNR boost over a 4 × 4 × 4 cm3 FOV in the heart, relative to body and spine arrays. ICMRI with MBaluns met ASTM/IEC heating limits during navigation. Tip-deflection allowed navigating ICMRI and EP catheter into atria and ventricles. Acute-lesion long-inversion-time-T1-weighted 3D-imaging (TWILITE) ablation-monitoring using ICMRI required 5:30 min, half the time needed with surface arrays alone. CONCLUSION: ICMRI assisted EP-catheter navigation to difficult targets and accelerated RFA monitoring.

Improvement of magnetic resonance imaging using a wireless radiofrequency resonator array.

In recent years, new human magnetic resonance imaging systems operating at static magnetic fields strengths of 7 Tesla or higher have become available, providing better signal sensitivity compared with lower field strengths. However, imaging human-sized objects at such high field strength and associated precession frequencies is limited due to the technical challenges associated with the wavelength effect, which substantially disturb the transmit field uniformity over the human body when conventional coils are used. Here we report a novel passive inductively-coupled radiofrequency resonator array design with a simple structure that works in conjunction with conventional coils and requires only to be tuned to the scanner's operating frequency. We show that inductive-coupling between the resonator array and the coil improves the transmit efficiency and signal sensitivity in the targeted region. The simple structure, flexibility, and cost-efficiency make the proposed array design an attractive approach for altering the transmit field distribution specially at high field systems, where the wavelength is comparable with the tissue size.

An endovaginal MRI array with a forward-looking coil for advanced gynecological cancer brachytherapy procedures: Design and initial results.

PURPOSE: To develop an endovaginal MRI array that provides signal enhancement forward into the posterior parametrium and sideways into the vaginal wall, accelerating multiple-contrast detection of residual tumors that survive external beam radiation. The array's enclosure should form an obturator for cervical cancer brachytherapy, allowing integration with MRI-guided catheter placement, CT, and interstitial radiation dose delivery. METHODS: The endovaginal array consisted of forward-looking and sideways-looking components. The forward-looking element imaged the cervix and posterior endometrium, and the sideways-looking elements imaged the vaginal wall. Electromagnetic simulation was performed to optimize the geometry of a forward-looking coil placed on a conductive-metallic substrate, extending the forward penetration above the coil's tip. Thereafter, an endovaginal array with one forward-looking coil and four sideways-looking elements was constructed and tested at 1.5 Tesla in saline and gel phantoms, and three sexually mature swine. Each coil's tuning, matching, and decoupling were optimized theoretically, implemented with electronic circuits, and validated with network-analyzer measurements. The array enclosure emulates a conventional brachytherapy obturator, allowing use of the internal imaging array together with tandem coils and interstitial catheters, as well as use of the enclosure alone during CT and radiation delivery. To evaluate the receive magnetic field ( B 1 - ) spatial profile, the endovaginal array's specific absorption-rate (SAR) distribution was simulated inside a gel ASTM phantom to determine extreme heating locations in advance of a heating test. Heating tests were then performed during high SAR imaging in a gel phantom at the predetermined locations, testing compliance with MRI safety standards. To assess array imaging performance, signal-to-noise-ratios (SNR) were calculated in a saline phantom and in vivo. Swine images were acquired with the endovaginal array combined with the scanner's body and spine arrays. RESULTS: Simulated B 1 - profiles for the forward-looking lobe pattern, obtained while varying several geometric parameters, disclosed that a forward-looking coil placed on a metal-backed substrate could double the effective forward penetration from approximately 25 to ∼40 mm. An endovaginal array, enclosed in an obturator enclosure was then constructed, with all coils tuned, matched, and decoupled. The ASTM gel-phantom SAR test showed that peak local SAR was 1.2 W/kg in the forward-looking coil and 0.3 W/kg in the sideways-looking elements, well within ASTM/FDA/IEC guidelines. A 15-min 4 W/kg average SAR imaging experiment resulted in less than 2o C temperature increase, also within ASTM/FDA/IEC heating limits. In a saline phantom, the forward-looking coil and sideways-looking array's SNR was four to eight times, over a 20-30 mm field-of-view (FOV), and five to eight times, over a 15-25 mm FOV, relative to the spine array's SNR, respectively. In three sexually mature swine, the forward-looking coil provided a 5 + 0.2 SNR enhancement factor within the cervix and posterior endometrium, and the sideways-looking array provided a 4 + 0.2 SNR gain factor in the vaginal wall, relative to the Siemens spine array, demonstrating that the array could significantly reduce imaging time. CONCLUSIONS: Higher SNR gynecological imaging is supported by forward-looking and sideways-looking coils. A forward-looking endovaginal coil for cervix and parametrium imaging was built with optimized metal backing. Array placement within an obturator enhanced integration with the brachytherapy procedure and accelerated imaging for detecting postexternal-beam residual tumors.

MRI Conditional Actively Tracked Metallic Electrophysiology Catheters and Guidewires With Miniature Tethered Radio-Frequency Traps: Theory, Design, and Validation.

OBJECTIVE: Cardiovascular interventional devices typically have long metallic braids or backbones to aid in steerability and pushability. However, electromagnetic coupling of metallic-based cardiovascular interventional devices with the radiofrequency (RF) fields present during Magnetic Resonance Imaging (MRI) can make a device unsafe for use in an MRI scanner. We aimed to develop MRI conditional actively-tracked cardiovascular interventional devices by sufficiently attenuating induced currents on the metallic braid/tube and internal-cabling using miniaturized resonant floating RF traps (MBaluns). METHOD: MBaluns were designed for placement at multiple locations along a conducting cardiovascular device to prevent the establishment of standing waves and to dissipate RF-induced energy. The MBaluns were constructed with loosely-wound solenoids to be sensitive to transverse magnetic fields created by both surface currents on the device's metallic backbone and common-mode currents on internal cables. Electromagnetic simulations were used to optimize MBalun parameters. Following optimization, two different MBalun designs were applied to MR-actively-tracked metallic guidewires and metallic-braided electrophysiology ablation catheters. Control-devices were constructed without MBaluns. MBalun performance was validated using network-analyzer quantification of current attenuation, electromagnetic Specific-Absorption-Rate (SAR) analysis, thermal tests during high SAR pulse sequences, and MRI-guided cardiovascular navigation in swine. RESULTS: Electromagnetic SAR simulations resulted in ≈20 dB attenuation at the tip of the wire using six successive MBaluns. Network-analyzer tests confirmed ∼17 dB/MBalun surface-current attenuation. Thermal tests indicated temperature decreases of 5.9 °C in the MBalun-equipped guidewire tip. Both devices allowed rapid vascular navigation resulting from good torquability and MR-Tracking visibility. CONCLUSION: MBaluns increased device diameter by 20%, relative to conventional devices, providing a spatially-efficient means to prevent heating during MRI. SIGNIFICANCE: MBaluns allow use of long metallic components, which improves mechanical performance in active MR-guided interventional devices.

Utilizing Multiple BioMEMS Sensors to Monitor Orthopaedic Strain and Predict Bone Fracture Healing.

Current diagnostic modalities, such as radiographs or computed tomography, exhibit limited ability to predict the outcome of bone fracture healing. Failed fracture healing after orthopaedic surgical treatments are typically treated by secondary surgery; however, the negative correlation of time between primary and secondary surgeries with resultant health outcome and medical cost accumulation drives the need for improved diagnostic tools. This study describes the simultaneous use of multiple (n = 5) implantable flexible substrate wireless microelectromechanical (fsBioMEMS) sensors adhered to an intramedullary nail (IMN) to quantify the biomechanical environment along the length of fracture fixation hardware during simulated healing in ex vivo ovine tibiae. This study further describes the development of an antenna array for interrogation of five fsBioMEMS sensors simultaneously, and quantifies the ability of these sensors to transmit signal through overlaying soft tissues. The ex vivo data indicated significant differences associated with sensor location on the IMN (p < 0.01) and fracture state (p < 0.01). These data indicate that the fsBioMEMS sensor can serve as a tool to diagnose the current state of fracture healing, and further supports the use of the fsBioMEMS as a means to predict fracture healing due to the known existence of latency between changes in fracture site material properties and radiographic changes. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1873-1880, 2019.

A temperature sensor implant for active implantable medical devices for in vivo subacute heating tests under MRI.

PURPOSE: To introduce a temperature sensor implant (TSI) that mimics an active implantable medical device (AIMD) for animal testing of MRI heating. Computer simulations and phantom experiments poorly represent potential temperature increases. Animal experiments could be a better model, but heating experiments conducted immediately after the surgery suffer from alterations of the thermoregulatory and tissue properties during acute testing conditions. Therefore, the aim of this study was to introduce a temperature sensor implant that mimics an AIMD and capable of measuring the electrode temperature after implantation of the device without any further intervention at any time after the surgery in an animal model. METHODS: A battery-operated TSI, which resembled an AIMD, was used to measure the lead temperature and impedance and the case temperature. The measured values were transmitted to an external computer via a low-power Bluetooth communication protocol. In addition to validation experiments on the phantom, a sheep experiment was conducted to test the feasibility of the system in subacute conditions. RESULTS: The measurements had a maximum of 0.5°C difference compared to fiber-optic temperature probes. In vivo animal experiments demonstrated feasibility of the system. CONCLUSION: An active implant, which can measure its own temperature, was proposed to investigate implant heating during MRI examinations. Magn Reson Med 79:2824-2832, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

A new class of cubic SPIONs as a dual-mode T1 and T2 contrast agent for MRI.

Superparamagnetic iron oxide nanoparticles (SPIONs) are widely used as a robust negative contrast agent on conventional MRI. In this study, we (a) synthesized a new class of cubic SPIONs as a dual-mode contrast agent in MRI and (b) showed the in-vivo feasibility of these nanaoparticles as a simultaneous positive and negative contrast agent. Relaxation properties and contrast enhancement analysis of the synthesized SPIONs with two different shapes (cubic vs. spherical) and three different sizes 7nm, 11nm, and 14nm were investigated to evaluate contrast enhancement in-vitro. In-vivo MRI experiments were performed on a 3T MR scanner, where a healthy anesthetized rat was imaged before, and from 20 to 80min after intravenous injection of 1mg/kg of contrast agent. Representative transmission electron microscopy (TEM) images of the synthesized nanoparticles reveal that the particles are well dispersed in a solvent and do not aggregate. The in-vitro relaxivity and contrast enhancement analysis show that, among all six SPIONs tested, 11-nm cubic SPIONs possess optimal molar relaxivities and contrast enhancement values, which can shorten the spin-lattice and spin-spin relaxation times, simultaneously. No noticeable toxicity is observed during in-vitro cytotoxicity analysis. In-vivo T1-and T2-weighted acquisitions at 60-min post-injection of 11-nm cubic SPIONs result in 64% and 48% contrast enhancement on the T1-and T2-weighted images, respectively. By controlling the shape and size of SPIONs, we have introduced a new class of cubic SPIONs as a synergistic (dual-mode) MRI contrast agent. 11-nm cubic SPIONs with smaller size and high positive and negative contrast enhancements were selected as a promising candidate for dual-mode contrast agent. Our proof-of-concept MRI experiments on rat demonstrate the in-vivo dual-mode contrast enhancement feasibility of these nanoparticles.

An inductively coupled ultra-thin, flexible, and passive RF resonator for MRI marking and guiding purposes: Clinical feasibility.

PURPOSE: The purpose of this study is to develop a wireless, flexible, ultra-thin, and passive radiofrequency-based MRI resonant fiducial marker, and to validate its feasibility in a phantom model and several body regions. METHODS: Standard microfabrication processing was used to fabricate the resonant marker. The proposed marker consists of two metal traces in the shape of a square with an edge length of 8 mm, with upper and lower traces connected to each other by a metalized via. A 3T MRI fiducial marking procedure was tested in phantom and ex vivo, and then the marker's performance was evaluated in an MRI experiment using humans. The radiofrequency safety was also tested using temperature sensors in the proximity of the resonator. RESULTS: A flexible resonator with a thickness of 115 µm and a dimension of 8 × 8 mm was obtained. The experimental results in the phantom show that at low background flip angles (6-18°), the resonant marker enables precise and rapid visibility, with high marker-to-background contrast and signal-to-noise ratio improvement of greater than 10 in the vicinity of the marker. Temperature analysis showed a specific absorption ratio gain of 1.3. Clinical studies further showed a successful biopsy procedure using the fiducial marking functionality of our device. CONCLUSIONS: The ultra-thin and flexible structure of this wireless flexible radiofrequency resonant marker offers effective and safe MR visualization with high feasibility for anatomic marking and guiding at various regions of the body. Magn Reson Med 80:361-370, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

Development of evidence-based practice in occupational health services in Sweden: a 3-year follow-up of attitudes, barriers and facilitators.

PURPOSE: The Swedish government initiated an investigation of how to secure and develop the competence of the occupational health services. The primary aim of the present study was to investigate whether the development of evidence-based practice (EBP) in the Swedish occupational health services in relation to attitudes, knowledge and use improved during the first 3 years of the government's initiative. METHODS: The study has a mixed methods design combining questionnaires and interviews with data collection at baseline and at 3-year follow-up. RESULTS: The response rate was 66% at baseline and 63% at follow-up. The results show that practitioners' knowledge of EBP was moderate at baseline and improved at follow-up (p = 0.002; 95% CI 0.01; 0.21). Practitioners experienced lower levels of organizational and managerial support for EBP at follow-up (p < 0.001; 95% CI 0.18; 0.38). The results revealed that managers viewed responsibility for implementing EBP as a matter for individual practitioners rather than as an organizational issue. CONCLUSIONS: Occupational health service managers and practitioners are generally positive to EBP. However, the findings emphasize the need to educate managers in how to support EBP at the organizational level by creating an infrastructure for EBP in the OHS.

Promoting physical activity and healthy dietary behavior: the role of the occupational health services: a scoping review.

OBJECTIVE: Conduct a scoping review to identify and map the literature that has evaluated the effects of health promotion interventions aimed at physical activity and/or dietary behavior, implemented by the occupational health services. METHODS: A search for peer-reviewed articles was conducted (up to February 2013) through electronic databases, hand searching of key journals, and reference lists. A methodological quality assessment was performed. RESULTS: Fourteen studies were included, describing 10 interventions. The main component was counseling of individuals with known cardiovascular disease risk factors. Intervention effects were reported for dietary behavior, physical activity, sedentary behavior, and biological risk factors. CONCLUSIONS: Results are promising, especially with regard to interventions containing counseling targeting individuals at risk. High-quality studies using objective measures to assess behavioral outcomes and the (cost)-effectiveness of interventions containing counseling, PA on prescription, and multilevel interventions are needed.

The transitional pattern of pain and disability, from perceived pain to sick leave. Experience from a longitudinal study.

OBJECTIVES: To investigate the prospective value of the transitional and dynamic patterns of pain disability over time on sick leave in chronic recurrent back/neck pain cases. METHODS: The material used was based on a longitudinal study with three repeated measurements. The graded Chronic Pain Scale was used to assess levels of pain disability. The relationship between the transitional patterns of the pain disability score (ten defined states of decrease, increase or no change, between two time points) and sick leave was analyzed for 909 chronic/recurrent cases in three different models using logistic regression. RESULTS: Those with high level of pain disability have a more transitional pattern and their pain level changed during the time period studied. When adjusting for age, gender, education and previous sick leave, the final model indicated that the current level of pain disability was a risk factor in taking sick leave. The likelihood of sick leave was highest in the transition of pain into the highest levels of disability, independent of past disability level of pain. Earlier sick leave remained as an important predictor of sick leave. CONCLUSIONS: From a clinical and prognostic perspective the probability of sick leave will be different and can be predicted based on previous sick leave but not from former history of pain disability level or its transitional pattern.

Four-year incidence of sick leave because of neck and shoulder pain and its association with work and lifestyle.

STUDY DESIGN: Four-year prospective cohort study. OBJECTIVE: To find the incidence of sick leave because of neck and shoulder pain (NSP) in industrial workers, and its association with work and lifestyle risk factors. SUMMARY OF BACKGROUND DATA: Longitudinal studies to investigate NSP incidence and risk factors are rare, and even fewer have been conducted in middle- and low-income countries. METHODS: After inviting all full-time employees of an Iranian car manufacturing company with 18,031 employees to participate in a baseline study, they were followed for 4 years. New episodes of sick leave because of NSP have been calculated based on sickness absence registration between the years 2003 and 2007. The incidence was compared for participants and nonparticipants. The association between sick leave, physical, and psychosocial risk factors at work, and previous self-reported NSP, was calculated for the remaining population of baseline participants (12,184 employees) during a 4-year follow-up. RESULTS: During a 4-year follow-up of study subjects for the remaining participants of the baseline study, the incidence of sick leave was 0.8% (98 sick leave cases in 12,184 employees). For nonparticipants this incidence was 4.2% (130 cases in 3127 employees). In the final regression model for sick leave cases, the remaining factors for potential physical risk factors were repetitive work and sitting positions at work; for psychosocial factors unattractive work was the only significant remaining factor. CONCLUSION: The incidence of NSP based on sick leave is definitely very low compared with previous studies in high-income countries. This incidence varies between participants and nonparticipants. Risk factors for sick leave differ from risk factors for self-reported pain. A young population, job security, the insurance system, different health behaviors, and healthy worker bias, are all factors that may affect the results, and sick-leave as an outcome must be interpreted with more caution in middle- and low-income countries.

Effect of psychosocial factors on low back pain in industrial workers.

AIM: To test the hypothesis that workplace psychosocial factors such as demand, control, support, job satisfaction and job appreciation can predict the future onset of disabling low back pain (LBP). METHODS: The present study involved a prospective cohort of 4500 Iranian industrial workers. Data were gathered by means of a self-reported questionnaire about LBP, as well as working life exposure, lifestyle factors, social exposures, co-morbidity, life events and psychosomatic complaints in 2004. All new episodes of disabling LBP resulting in medically certified sick leave during the 1-year follow-up registered by occupational health clinic inside the factory. RESULTS: The participation rate was good (85%). A total of 744 subjects reported current LBP (point prevalence cases). A total of 52 (<2%) new episodes of disabling LBP were observed during the 1-year follow-up (incident cases). Male employees reported higher demands, lower control and lower support than female employees. Employees with high demands, low control, job strain, low job satisfaction and low job appreciation showed increased odds ratios, and these results were statistically significant. CONCLUSIONS: Few prospective studies in this field have been published, but all of them are related to industrialized countries. This prospective study suggests the aetiological role of job strain for LBP. The findings of this study indicate a substantial potential for disease prevention and health promotion at the workplace.

Occupational neck and shoulder pain among automobile manufacturing workers in Iran.

BACKGROUND: Work-related musculoskeletal disorders (MSDs) of the upper extremities are a major problem globally, though most relevant studies have been reported from high income countries. AIMS AND METHODS: The prevalence of neck and shoulder pain and its association with work-related physical and psychosocial factors and life style was determined by a cross-sectional survey using the Nordic Musculoskeletal Questionnaire (NMQ) in the largest Iranian car manufacturing company, with more than 18,000 employees. RESULTS: A total of 14,384 (79.8%) of all employees completed the questionnaire. Depending on the questions used to measure neck and shoulder symptoms, the prevalence varied widely (from 20.5% to 3.9%). In the multiple logistic regression model, limited to employees with at least 1 year of work experience, risk indicators for disabling pain of the neck and/or shoulder that remained for male were: duration of employment, high visual demands, repetitive work, sitting position at work, awkward working position, no regular exercise, monotonous work, lack of encouraging organizational culture, and anxiety concerning change. For female repetitive work, sitting position at work and no support if there is trouble at work were the only remaining factors. CONCLUSIONS: The study confirms the effects of physical and psychosocial factors on neck and shoulder symptoms among automobile manufacturing workers in a low to middle income country in spite of the relative youth and job insecurity of the population.

Reliability and validity study of Persian modified version of MUSIC (musculoskeletal intervention center) - Norrtalje questionnaire.

BACKGROUND: Musculoskeletal disorders (MSDs) are a major health problem in the world. Self-reported questionnaires are a known method for estimating the prevalence of MSDs among the population. One of the studies concerning MSDs and their relation to work-related physical and psychosocial factors, as well as non-work-related factors, is the MUSIC-Norrtalje study in Sweden. In this study, the research group developed a questionnaire, which has been validated during its development process and is now considered a well-known instrument. The aim of this study is to validate the Persian version of this questionnaire. METHODS: The first step was to establish two expert panel groups in Iran and Sweden. The Focus Group Discussion (FGD) method was used to detect questionnaire face and content validity. To detect questionnaire reliability, we used the test-retest method. RESULTS: Except for two items, all other questions that respondents had problems with in the focus group (20 of 297), had unclear translations; the ambiguity was related to the stem of the questions and the predicted answers were clear for the participants. The concepts of 'household/spare time' and 'physical activity in the workplace' were not understood by the participants of FGD; this has been solved by adding further descriptions to these phrases in the translation. In the test-retest study, the reliability coefficient was relatively high in most items (only 5 items out of 297 had an ICC or kappa below 0.7). CONCLUSION: The findings from the present study provide evidence that the Persian version of the MUSIC questionnaire is a reliable and valid instrument.

Incidence and recurrence of disabling low back pain and neck-shoulder pain.

STUDY DESIGN: A prospective cohort study with 1-year follow-up. OBJECTIVES: To assess incidence and recurrence of disabling low back (LBP) and neck-shoulder pain (NSP) in an industrial population, and to investigate the association with sex and job title during follow-up. SUMMARY OF BACKGROUND DATA: Epidemiologic data of LBP and NSP are sparse from developing countries. METHODS: All employees (18,031) in an Iranian industry were invited to participate in a baseline survey and followed for 1 year regarding new episodes of sickness absence due to LBP or NSP (disabling pain). RESULTS: The 1-year incidence of disabling LBP was 2.1% and of NSP 0.1%. Although the prevalence of LBP in females was higher than in males, the incidence disabling LBP were higher in males. Both prevalence and incidence of disabling LBP were high in unskilled workers. For NSP, managers had the highest reported prevalence, but incident cases happened only among office workers and unskilled workers. CONCLUSIONS: The incidence, especially for NSP, is much lower than from developed countries. To study prevalence, incidence and recurrence of LBP and NSP simultaneously leads to a better understanding of the natural pattern and distribution of LBP and NSP in a working population.